[PATCH v2 08/15] hw/char: Remove TYPE_ETRAX_FS_SERIAL device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We just removed the single machine using it (axis-dev88).

Signed-off-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx>
---
 include/hw/cris/etraxfs.h |  18 ---
 hw/char/etraxfs_ser.c     | 267 --------------------------------------
 hw/char/meson.build       |   1 -
 3 files changed, 286 deletions(-)
 delete mode 100644 hw/char/etraxfs_ser.c

diff --git a/include/hw/cris/etraxfs.h b/include/hw/cris/etraxfs.h
index 012c4e9974..6d23f6f13f 100644
--- a/include/hw/cris/etraxfs.h
+++ b/include/hw/cris/etraxfs.h
@@ -27,28 +27,10 @@
 
 #include "net/net.h"
 #include "hw/cris/etraxfs_dma.h"
-#include "hw/qdev-properties.h"
-#include "hw/sysbus.h"
 #include "qapi/error.h"
 
 DeviceState *etraxfs_eth_init(hwaddr base, int phyaddr,
                               struct etraxfs_dma_client *dma_out,
                               struct etraxfs_dma_client *dma_in);
 
-static inline DeviceState *etraxfs_ser_create(hwaddr addr,
-                                              qemu_irq irq,
-                                              Chardev *chr)
-{
-    DeviceState *dev;
-    SysBusDevice *s;
-
-    dev = qdev_new("etraxfs-serial");
-    s = SYS_BUS_DEVICE(dev);
-    qdev_prop_set_chr(dev, "chardev", chr);
-    sysbus_realize_and_unref(s, &error_fatal);
-    sysbus_mmio_map(s, 0, addr);
-    sysbus_connect_irq(s, 0, irq);
-    return dev;
-}
-
 #endif
diff --git a/hw/char/etraxfs_ser.c b/hw/char/etraxfs_ser.c
deleted file mode 100644
index 8d6422dae4..0000000000
--- a/hw/char/etraxfs_ser.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * QEMU ETRAX System Emulator
- *
- * Copyright (c) 2007 Edgar E. Iglesias, Axis Communications AB.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "qemu/osdep.h"
-#include "hw/irq.h"
-#include "hw/qdev-properties.h"
-#include "hw/qdev-properties-system.h"
-#include "hw/sysbus.h"
-#include "chardev/char-fe.h"
-#include "qemu/log.h"
-#include "qemu/module.h"
-#include "qom/object.h"
-
-#define D(x)
-
-#define RW_TR_CTRL     (0x00 / 4)
-#define RW_TR_DMA_EN   (0x04 / 4)
-#define RW_REC_CTRL    (0x08 / 4)
-#define RW_DOUT        (0x1c / 4)
-#define RS_STAT_DIN    (0x20 / 4)
-#define R_STAT_DIN     (0x24 / 4)
-#define RW_INTR_MASK   (0x2c / 4)
-#define RW_ACK_INTR    (0x30 / 4)
-#define R_INTR         (0x34 / 4)
-#define R_MASKED_INTR  (0x38 / 4)
-#define R_MAX          (0x3c / 4)
-
-#define STAT_DAV     16
-#define STAT_TR_IDLE 22
-#define STAT_TR_RDY  24
-
-#define TYPE_ETRAX_FS_SERIAL "etraxfs-serial"
-typedef struct ETRAXSerial ETRAXSerial;
-DECLARE_INSTANCE_CHECKER(ETRAXSerial, ETRAX_SERIAL,
-                         TYPE_ETRAX_FS_SERIAL)
-
-struct ETRAXSerial {
-    SysBusDevice parent_obj;
-
-    MemoryRegion mmio;
-    CharBackend chr;
-    qemu_irq irq;
-
-    int pending_tx;
-
-    uint8_t rx_fifo[16];
-    unsigned int rx_fifo_pos;
-    unsigned int rx_fifo_len;
-
-    /* Control registers.  */
-    uint32_t regs[R_MAX];
-};
-
-static void ser_update_irq(ETRAXSerial *s)
-{
-
-    if (s->rx_fifo_len) {
-        s->regs[R_INTR] |= 8;
-    } else {
-        s->regs[R_INTR] &= ~8;
-    }
-
-    s->regs[R_MASKED_INTR] = s->regs[R_INTR] & s->regs[RW_INTR_MASK];
-    qemu_set_irq(s->irq, !!s->regs[R_MASKED_INTR]);
-}
-
-static uint64_t
-ser_read(void *opaque, hwaddr addr, unsigned int size)
-{
-    ETRAXSerial *s = opaque;
-    uint32_t r = 0;
-
-    addr >>= 2;
-    switch (addr)
-    {
-        case R_STAT_DIN:
-            r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
-            if (s->rx_fifo_len) {
-                r |= 1 << STAT_DAV;
-            }
-            r |= 1 << STAT_TR_RDY;
-            r |= 1 << STAT_TR_IDLE;
-            break;
-        case RS_STAT_DIN:
-            r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
-            if (s->rx_fifo_len) {
-                r |= 1 << STAT_DAV;
-                s->rx_fifo_len--;
-            }
-            r |= 1 << STAT_TR_RDY;
-            r |= 1 << STAT_TR_IDLE;
-            break;
-        default:
-            r = s->regs[addr];
-            D(qemu_log("%s " HWADDR_FMT_plx "=%x\n", __func__, addr, r));
-            break;
-    }
-    return r;
-}
-
-static void
-ser_write(void *opaque, hwaddr addr,
-          uint64_t val64, unsigned int size)
-{
-    ETRAXSerial *s = opaque;
-    uint32_t value = val64;
-    unsigned char ch = val64;
-
-    D(qemu_log("%s " HWADDR_FMT_plx "=%x\n",  __func__, addr, value));
-    addr >>= 2;
-    switch (addr)
-    {
-        case RW_DOUT:
-            /* XXX this blocks entire thread. Rewrite to use
-             * qemu_chr_fe_write and background I/O callbacks */
-            qemu_chr_fe_write_all(&s->chr, &ch, 1);
-            s->regs[R_INTR] |= 3;
-            s->pending_tx = 1;
-            s->regs[addr] = value;
-            break;
-        case RW_ACK_INTR:
-            if (s->pending_tx) {
-                value &= ~1;
-                s->pending_tx = 0;
-                D(qemu_log("fixedup value=%x r_intr=%x\n",
-                           value, s->regs[R_INTR]));
-            }
-            s->regs[addr] = value;
-            s->regs[R_INTR] &= ~value;
-            D(printf("r_intr=%x\n", s->regs[R_INTR]));
-            break;
-        default:
-            s->regs[addr] = value;
-            break;
-    }
-    ser_update_irq(s);
-}
-
-static const MemoryRegionOps ser_ops = {
-    .read = ser_read,
-    .write = ser_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-    .valid = {
-        .min_access_size = 4,
-        .max_access_size = 4
-    }
-};
-
-static Property etraxfs_ser_properties[] = {
-    DEFINE_PROP_CHR("chardev", ETRAXSerial, chr),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void serial_receive(void *opaque, const uint8_t *buf, int size)
-{
-    ETRAXSerial *s = opaque;
-    int i;
-
-    /* Got a byte.  */
-    if (s->rx_fifo_len >= 16) {
-        D(qemu_log("WARNING: UART dropped char.\n"));
-        return;
-    }
-
-    for (i = 0; i < size; i++) { 
-        s->rx_fifo[s->rx_fifo_pos] = buf[i];
-        s->rx_fifo_pos++;
-        s->rx_fifo_pos &= 15;
-        s->rx_fifo_len++;
-    }
-
-    ser_update_irq(s);
-}
-
-static int serial_can_receive(void *opaque)
-{
-    ETRAXSerial *s = opaque;
-
-    /* Is the receiver enabled?  */
-    if (!(s->regs[RW_REC_CTRL] & (1 << 3))) {
-        return 0;
-    }
-
-    return sizeof(s->rx_fifo) - s->rx_fifo_len;
-}
-
-static void serial_event(void *opaque, QEMUChrEvent event)
-{
-
-}
-
-static void etraxfs_ser_reset(DeviceState *d)
-{
-    ETRAXSerial *s = ETRAX_SERIAL(d);
-
-    /* transmitter begins ready and idle.  */
-    s->regs[RS_STAT_DIN] |= (1 << STAT_TR_RDY);
-    s->regs[RS_STAT_DIN] |= (1 << STAT_TR_IDLE);
-
-    s->regs[RW_REC_CTRL] = 0x10000;
-
-}
-
-static void etraxfs_ser_init(Object *obj)
-{
-    ETRAXSerial *s = ETRAX_SERIAL(obj);
-    SysBusDevice *dev = SYS_BUS_DEVICE(obj);
-
-    sysbus_init_irq(dev, &s->irq);
-    memory_region_init_io(&s->mmio, obj, &ser_ops, s,
-                          "etraxfs-serial", R_MAX * 4);
-    sysbus_init_mmio(dev, &s->mmio);
-}
-
-static void etraxfs_ser_realize(DeviceState *dev, Error **errp)
-{
-    ETRAXSerial *s = ETRAX_SERIAL(dev);
-
-    qemu_chr_fe_set_handlers(&s->chr,
-                             serial_can_receive, serial_receive,
-                             serial_event, NULL, s, NULL, true);
-}
-
-static void etraxfs_ser_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-
-    dc->reset = etraxfs_ser_reset;
-    device_class_set_props(dc, etraxfs_ser_properties);
-    dc->realize = etraxfs_ser_realize;
-}
-
-static const TypeInfo etraxfs_ser_info = {
-    .name          = TYPE_ETRAX_FS_SERIAL,
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(ETRAXSerial),
-    .instance_init = etraxfs_ser_init,
-    .class_init    = etraxfs_ser_class_init,
-};
-
-static void etraxfs_serial_register_types(void)
-{
-    type_register_static(&etraxfs_ser_info);
-}
-
-type_init(etraxfs_serial_register_types)
diff --git a/hw/char/meson.build b/hw/char/meson.build
index e5b13b6958..a4c4c5ff0f 100644
--- a/hw/char/meson.build
+++ b/hw/char/meson.build
@@ -1,7 +1,6 @@
 system_ss.add(when: 'CONFIG_CADENCE', if_true: files('cadence_uart.c'))
 system_ss.add(when: 'CONFIG_CMSDK_APB_UART', if_true: files('cmsdk-apb-uart.c'))
 system_ss.add(when: 'CONFIG_ESCC', if_true: files('escc.c'))
-system_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_ser.c'))
 system_ss.add(when: 'CONFIG_GRLIB', if_true: files('grlib_apbuart.c'))
 system_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_uart.c'))
 system_ss.add(when: 'CONFIG_IMX', if_true: files('imx_serial.c'))
-- 
2.45.2




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux