The 'compress' migration capability enables the old compression code
which has shown issues over the years and is thought to be less stable
and tested than the more recent multifd-based compression. The old
compression code has been deprecated in 8.2 and now is time to remove
it.
Deprecation commit 864128df46 ("migration: Deprecate old compression
method").
Acked-by: Markus Armbruster <armbru@xxxxxxxxxx>
Signed-off-by: Fabiano Rosas <farosas@xxxxxxx>
---
docs/about/deprecated.rst | 11 -
docs/about/removed-features.rst | 55 ++++
hw/core/machine.c | 1 -
migration/meson.build | 1 -
migration/migration-hmp-cmds.c | 47 ---
migration/migration.c | 14 -
migration/migration.h | 7 -
migration/options.c | 164 ----------
migration/options.h | 5 -
migration/qemu-file.c | 78 -----
migration/qemu-file.h | 4 -
migration/ram-compress.c | 564 --------------------------------
migration/ram-compress.h | 77 -----
migration/ram.c | 154 +--------
qapi/migration.json | 112 -------
tests/qtest/migration-test.c | 139 --------
16 files changed, 64 insertions(+), 1369 deletions(-)
delete mode 100644 migration/ram-compress.c
delete mode 100644 migration/ram-compress.h
diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst
index 3b9b5ba6ef..0fb5c82640 100644
--- a/docs/about/deprecated.rst
+++ b/docs/about/deprecated.rst
@@ -464,14 +464,3 @@ both, older and future versions of QEMU.
The ``blacklist`` config file option has been renamed to ``block-rpcs``
(to be in sync with the renaming of the corresponding command line
option).
-
-Migration
----------
-
-old compression method (since 8.2)
-''''''''''''''''''''''''''''''''''
-
-Compression method fails too much. Too many races. We are going to
-remove it if nobody fixes it. For starters, migration-test
-compression tests are disabled because they fail randomly. If you need
-compression, use multifd compression methods.
diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst
index 9e7d8ee4ff..fba0cfb0b0 100644
--- a/docs/about/removed-features.rst
+++ b/docs/about/removed-features.rst
@@ -505,6 +505,11 @@ configurations (e.g. -smp 8,sockets=0) is removed since 9.0, users have
to ensure that all the topology members described with -smp are greater
than zero.
+``-global migration.decompress-error-check`` (removed in 9.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Removed along with the ``compression`` migration capability.
+
User-mode emulator command line arguments
-----------------------------------------
@@ -641,6 +646,31 @@ Block migration has been removed. For a replacement, see "QMP
invocation for live storage migration with ``blockdev-mirror`` + NBD"
in docs/interop/live-block-operations.rst.
+``migrate-set-parameter`` ``compress-level`` option (removed in 9.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``multifd-zlib-level`` or ``multifd-zstd-level`` instead.
+
+``migrate-set-parameter`` ``compress-threads`` option (removed in 9.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``multifd-channels`` instead.
+
+``migrate-set-parameter`` ``compress-wait-thread`` option (removed in 9.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Removed with no replacement.
+
+``migrate-set-parameter`` ``decompress-threads`` option (removed in 9.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``multifd-channels`` instead.
+
+``migrate-set-capability`` ``compress`` option (removed in 9.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``multifd-compression`` instead.
+
Human Monitor Protocol (HMP) commands
-------------------------------------
@@ -722,6 +752,31 @@ Block migration has been removed. For a replacement, see "QMP
invocation for live storage migration with ``blockdev-mirror`` + NBD"
in docs/interop/live-block-operations.rst.
+``migrate_set_parameter`` ``compress-level`` option (removed in 9.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``multifd-zlib-level`` or ``multifd-zstd-level`` instead.
+
+``migrate_set_parameter`` ``compress-threads`` option (removed in 9.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``multifd-channels`` instead.
+
+``migrate_set_parameter`` ``compress-wait-thread`` option (removed in 9.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Removed with no replacement.
+
+``migrate_set_parameter`` ``decompress-threads`` option (removed in 9.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``multifd-channels`` instead.
+
+``migrate_set_capability`` ``compress`` option (removed in 9.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``multifd-compression`` instead.
+
Host Architectures
------------------
diff --git a/hw/core/machine.c b/hw/core/machine.c
index 0dec48e802..60009c639c 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -190,7 +190,6 @@ GlobalProperty hw_compat_3_0[] = {};
const size_t hw_compat_3_0_len = G_N_ELEMENTS(hw_compat_3_0);
GlobalProperty hw_compat_2_12[] = {
- { "migration", "decompress-error-check", "off" },
{ "hda-audio", "use-timer", "false" },
{ "cirrus-vga", "global-vmstate", "true" },
{ "VGA", "global-vmstate", "true" },
diff --git a/migration/meson.build b/migration/meson.build
index d7e118f584..8815f80837 100644
--- a/migration/meson.build
+++ b/migration/meson.build
@@ -23,7 +23,6 @@ system_ss.add(files(
'multifd.c',
'multifd-zlib.c',
'multifd-zero-page.c',
- 'ram-compress.c',
'options.c',
'postcopy-ram.c',
'savevm.c',
diff --git a/migration/migration-hmp-cmds.c b/migration/migration-hmp-cmds.c
index 8040f1a46f..2499414235 100644
--- a/migration/migration-hmp-cmds.c
+++ b/migration/migration-hmp-cmds.c
@@ -46,8 +46,6 @@ static void migration_global_dump(Monitor *mon)
ms->send_configuration ? "on" : "off");
monitor_printf(mon, "send-section-footer: %s\n",
ms->send_section_footer ? "on" : "off");
- monitor_printf(mon, "decompress-error-check: %s\n",
- ms->decompress_error_check ? "on" : "off");
monitor_printf(mon, "clear-bitmap-shift: %u\n",
ms->clear_bitmap_shift);
}
@@ -162,19 +160,6 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict)
info->xbzrle_cache->overflow);
}
- if (info->compression) {
- monitor_printf(mon, "compression pages: %" PRIu64 " pages\n",
- info->compression->pages);
- monitor_printf(mon, "compression busy: %" PRIu64 "\n",
- info->compression->busy);
- monitor_printf(mon, "compression busy rate: %0.2f\n",
- info->compression->busy_rate);
- monitor_printf(mon, "compressed size: %" PRIu64 " kbytes\n",
- info->compression->compressed_size >> 10);
- monitor_printf(mon, "compression rate: %0.2f\n",
- info->compression->compression_rate);
- }
-
if (info->has_cpu_throttle_percentage) {
monitor_printf(mon, "cpu throttle percentage: %" PRIu64 "\n",
info->cpu_throttle_percentage);
@@ -263,22 +248,6 @@ void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict)
monitor_printf(mon, "%s: %" PRIu64 " ms\n",
MigrationParameter_str(MIGRATION_PARAMETER_ANNOUNCE_STEP),
params->announce_step);
- assert(params->has_compress_level);
- monitor_printf(mon, "%s: %u\n",
- MigrationParameter_str(MIGRATION_PARAMETER_COMPRESS_LEVEL),
- params->compress_level);
- assert(params->has_compress_threads);
- monitor_printf(mon, "%s: %u\n",
- MigrationParameter_str(MIGRATION_PARAMETER_COMPRESS_THREADS),
- params->compress_threads);
- assert(params->has_compress_wait_thread);
- monitor_printf(mon, "%s: %s\n",
- MigrationParameter_str(MIGRATION_PARAMETER_COMPRESS_WAIT_THREAD),
- params->compress_wait_thread ? "on" : "off");
- assert(params->has_decompress_threads);
- monitor_printf(mon, "%s: %u\n",
- MigrationParameter_str(MIGRATION_PARAMETER_DECOMPRESS_THREADS),
- params->decompress_threads);
assert(params->has_throttle_trigger_threshold);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD),
@@ -520,22 +489,6 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
}
switch (val) {
- case MIGRATION_PARAMETER_COMPRESS_LEVEL:
- p->has_compress_level = true;
- visit_type_uint8(v, param, &p->compress_level, &err);
- break;
- case MIGRATION_PARAMETER_COMPRESS_THREADS:
- p->has_compress_threads = true;
- visit_type_uint8(v, param, &p->compress_threads, &err);
- break;
- case MIGRATION_PARAMETER_COMPRESS_WAIT_THREAD:
- p->has_compress_wait_thread = true;
- visit_type_bool(v, param, &p->compress_wait_thread, &err);
- break;
- case MIGRATION_PARAMETER_DECOMPRESS_THREADS:
- p->has_decompress_threads = true;
- visit_type_uint8(v, param, &p->decompress_threads, &err);
- break;
case MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD:
p->has_throttle_trigger_threshold = true;
visit_type_uint8(v, param, &p->throttle_trigger_threshold, &err);
diff --git a/migration/migration.c b/migration/migration.c
index 26017c9a2c..5dad66b810 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -27,7 +27,6 @@
#include "sysemu/cpu-throttle.h"
#include "rdma.h"
#include "ram.h"
-#include "ram-compress.h"
#include "migration/global_state.h"
#include "migration/misc.h"
#include "migration.h"
@@ -352,7 +351,6 @@ void migration_incoming_state_destroy(void)
struct MigrationIncomingState *mis = migration_incoming_get_current();
multifd_recv_cleanup();
- compress_threads_load_cleanup();
if (mis->to_src_file) {
/* Tell source that we are done */
@@ -645,10 +643,6 @@ static void qemu_start_incoming_migration(const char *uri, bool has_channels,
}
#ifdef CONFIG_RDMA
} else if (addr->transport == MIGRATION_ADDRESS_TYPE_RDMA) {
- if (migrate_compress()) {
- error_setg(errp, "RDMA and compression can't be used together");
- return;
- }
if (migrate_xbzrle()) {
error_setg(errp, "RDMA and XBZRLE can't be used together");
return;
@@ -739,11 +733,6 @@ process_incoming_migration_co(void *opaque)
assert(mis->from_src_file);
- if (compress_threads_load_setup(mis->from_src_file)) {
- error_report("Failed to setup decompress threads");
- goto fail;
- }
-
mis->largest_page_size = qemu_ram_pagesize_largest();
postcopy_state_set(POSTCOPY_INCOMING_NONE);
migrate_set_state(&mis->state, MIGRATION_STATUS_SETUP,
@@ -800,7 +789,6 @@ fail:
qemu_fclose(mis->from_src_file);
multifd_recv_cleanup();
- compress_threads_load_cleanup();
exit(EXIT_FAILURE);
}
@@ -1174,8 +1162,6 @@ static void populate_ram_info(MigrationInfo *info, MigrationState *s)
info->xbzrle_cache->overflow = xbzrle_counters.overflow;
}
- populate_compress(info);
-
if (cpu_throttle_active()) {
info->has_cpu_throttle_percentage = true;
info->cpu_throttle_percentage = cpu_throttle_get_percentage();
diff --git a/migration/migration.h b/migration/migration.h
index 96b0bc323a..73bc02b598 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -389,13 +389,6 @@ struct MigrationState {
/* Needed by postcopy-pause state */
QemuSemaphore postcopy_pause_sem;
- /*
- * Whether we abort the migration if decompression errors are
- * detected at the destination. It is left at false for qemu
- * older than 3.0, since only newer qemu sends streams that
- * do not trigger spurious decompression errors.
- */
- bool decompress_error_check;
/*
* This variable only affects behavior when postcopy preempt mode is
* enabled.
diff --git a/migration/options.c b/migration/options.c
index cc2599ae4a..5ab5b6d85d 100644
--- a/migration/options.c
+++ b/migration/options.c
@@ -40,13 +40,6 @@
* for sending the last part */
#define DEFAULT_MIGRATE_SET_DOWNTIME 300
-/* Default compression thread count */
-#define DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT 8
-/* Default decompression thread count, usually decompression is at
- * least 4 times as fast as compression.*/
-#define DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT 2
-/*0: means nocompress, 1: best speed, ... 9: best compress ratio */
-#define DEFAULT_MIGRATE_COMPRESS_LEVEL 1
/* Define default autoconverge cpu throttle migration parameters */
#define DEFAULT_MIGRATE_THROTTLE_TRIGGER_THRESHOLD 50
#define DEFAULT_MIGRATE_CPU_THROTTLE_INITIAL 20
@@ -92,8 +85,6 @@ Property migration_properties[] = {
send_configuration, true),
DEFINE_PROP_BOOL("send-section-footer", MigrationState,
send_section_footer, true),
- DEFINE_PROP_BOOL("decompress-error-check", MigrationState,
- decompress_error_check, true),
DEFINE_PROP_BOOL("multifd-flush-after-each-section", MigrationState,
multifd_flush_after_each_section, false),
DEFINE_PROP_UINT8("x-clear-bitmap-shift", MigrationState,
@@ -102,17 +93,6 @@ Property migration_properties[] = {
preempt_pre_7_2, false),
/* Migration parameters */
- DEFINE_PROP_UINT8("x-compress-level", MigrationState,
- parameters.compress_level,
- DEFAULT_MIGRATE_COMPRESS_LEVEL),
- DEFINE_PROP_UINT8("x-compress-threads", MigrationState,
- parameters.compress_threads,
- DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT),
- DEFINE_PROP_BOOL("x-compress-wait-thread", MigrationState,
- parameters.compress_wait_thread, true),
- DEFINE_PROP_UINT8("x-decompress-threads", MigrationState,
- parameters.decompress_threads,
- DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT),
DEFINE_PROP_UINT8("x-throttle-trigger-threshold", MigrationState,
parameters.throttle_trigger_threshold,
DEFAULT_MIGRATE_THROTTLE_TRIGGER_THRESHOLD),
@@ -188,7 +168,6 @@ Property migration_properties[] = {
DEFINE_PROP_MIG_CAP("x-rdma-pin-all", MIGRATION_CAPABILITY_RDMA_PIN_ALL),
DEFINE_PROP_MIG_CAP("x-auto-converge", MIGRATION_CAPABILITY_AUTO_CONVERGE),
DEFINE_PROP_MIG_CAP("x-zero-blocks", MIGRATION_CAPABILITY_ZERO_BLOCKS),
- DEFINE_PROP_MIG_CAP("x-compress", MIGRATION_CAPABILITY_COMPRESS),
DEFINE_PROP_MIG_CAP("x-events", MIGRATION_CAPABILITY_EVENTS),
DEFINE_PROP_MIG_CAP("x-postcopy-ram", MIGRATION_CAPABILITY_POSTCOPY_RAM),
DEFINE_PROP_MIG_CAP("x-postcopy-preempt",
@@ -231,13 +210,6 @@ bool migrate_colo(void)
return s->capabilities[MIGRATION_CAPABILITY_X_COLO];
}
-bool migrate_compress(void)
-{
- MigrationState *s = migrate_get_current();
-
- return s->capabilities[MIGRATION_CAPABILITY_COMPRESS];
-}
-
bool migrate_dirty_bitmaps(void)
{
MigrationState *s = migrate_get_current();
@@ -451,7 +423,6 @@ INITIALIZE_MIGRATE_CAPS_SET(check_caps_background_snapshot,
MIGRATION_CAPABILITY_AUTO_CONVERGE,
MIGRATION_CAPABILITY_RELEASE_RAM,
MIGRATION_CAPABILITY_RDMA_PIN_ALL,
- MIGRATION_CAPABILITY_COMPRESS,
MIGRATION_CAPABILITY_XBZRLE,
MIGRATION_CAPABILITY_X_COLO,
MIGRATION_CAPABILITY_VALIDATE_UUID,
@@ -476,11 +447,6 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp)
ERRP_GUARD();
MigrationIncomingState *mis = migration_incoming_get_current();
- if (new_caps[MIGRATION_CAPABILITY_COMPRESS]) {
- warn_report("old compression method is deprecated;"
- " use multifd compression methods instead");
- }
-
#ifndef CONFIG_REPLICATION
if (new_caps[MIGRATION_CAPABILITY_X_COLO]) {
error_setg(errp, "QEMU compiled without replication module"
@@ -549,7 +515,6 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp)
#ifdef CONFIG_LINUX
if (new_caps[MIGRATION_CAPABILITY_ZERO_COPY_SEND] &&
(!new_caps[MIGRATION_CAPABILITY_MULTIFD] ||
- new_caps[MIGRATION_CAPABILITY_COMPRESS] ||
new_caps[MIGRATION_CAPABILITY_XBZRLE] ||
migrate_multifd_compression() ||
migrate_tls())) {
@@ -571,17 +536,6 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp)
return false;
}
- /*
- * Preempt mode requires urgent pages to be sent in separate
- * channel, OTOH compression logic will disorder all pages into
- * different compression channels, which is not compatible with the
- * preempt assumptions on channel assignments.
- */
- if (new_caps[MIGRATION_CAPABILITY_COMPRESS]) {
- error_setg(errp, "Postcopy preempt not compatible with compress");
- return false;
- }
-
if (migrate_incoming_started()) {
error_setg(errp,
"Postcopy preempt must be set before incoming starts");
@@ -590,10 +544,6 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp)
}
if (new_caps[MIGRATION_CAPABILITY_MULTIFD]) {
- if (new_caps[MIGRATION_CAPABILITY_COMPRESS]) {
- error_setg(errp, "Multifd is not compatible with compress");
- return false;
- }
if (migrate_incoming_started()) {
error_setg(errp, "Multifd must be set before incoming starts");
return false;
@@ -628,13 +578,6 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp)
}
}
- if (new_caps[MIGRATION_CAPABILITY_COMPRESS]) {
- if (new_caps[MIGRATION_CAPABILITY_XBZRLE]) {
- error_setg(errp, "Compression is not compatible with xbzrle");
- return false;
- }
- }
-
if (new_caps[MIGRATION_CAPABILITY_MAPPED_RAM]) {
if (new_caps[MIGRATION_CAPABILITY_XBZRLE]) {
error_setg(errp,
@@ -642,12 +585,6 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp)
return false;
}
- if (new_caps[MIGRATION_CAPABILITY_COMPRESS]) {
- error_setg(errp,
- "Mapped-ram migration is incompatible with compression");
- return false;
- }
-
if (new_caps[MIGRATION_CAPABILITY_POSTCOPY_RAM]) {
error_setg(errp,
"Mapped-ram migration is incompatible with postcopy");
@@ -744,27 +681,6 @@ uint32_t migrate_checkpoint_delay(void)
return s->parameters.x_checkpoint_delay;
}
-int migrate_compress_level(void)
-{
- MigrationState *s = migrate_get_current();
-
- return s->parameters.compress_level;
-}
-
-int migrate_compress_threads(void)
-{
- MigrationState *s = migrate_get_current();
-
- return s->parameters.compress_threads;
-}
-
-int migrate_compress_wait_thread(void)
-{
- MigrationState *s = migrate_get_current();
-
- return s->parameters.compress_wait_thread;
-}
-
uint8_t migrate_cpu_throttle_increment(void)
{
MigrationState *s = migrate_get_current();
@@ -786,13 +702,6 @@ bool migrate_cpu_throttle_tailslow(void)
return s->parameters.cpu_throttle_tailslow;
}
-int migrate_decompress_threads(void)
-{
- MigrationState *s = migrate_get_current();
-
- return s->parameters.decompress_threads;
-}
-
uint64_t migrate_downtime_limit(void)
{
MigrationState *s = migrate_get_current();
@@ -938,14 +847,6 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
/* TODO use QAPI_CLONE() instead of duplicating it inline */
params = g_malloc0(sizeof(*params));
- params->has_compress_level = true;
- params->compress_level = s->parameters.compress_level;
- params->has_compress_threads = true;
- params->compress_threads = s->parameters.compress_threads;
- params->has_compress_wait_thread = true;
- params->compress_wait_thread = s->parameters.compress_wait_thread;
- params->has_decompress_threads = true;
- params->decompress_threads = s->parameters.decompress_threads;
params->has_throttle_trigger_threshold = true;
params->throttle_trigger_threshold = s->parameters.throttle_trigger_threshold;
params->has_cpu_throttle_initial = true;
@@ -1014,10 +915,6 @@ void migrate_params_init(MigrationParameters *params)
params->tls_creds = g_strdup("");
/* Set has_* up only for parameter checks */
- params->has_compress_level = true;
- params->has_compress_threads = true;
- params->has_compress_wait_thread = true;
- params->has_decompress_threads = true;
params->has_throttle_trigger_threshold = true;
params->has_cpu_throttle_initial = true;
params->has_cpu_throttle_increment = true;
@@ -1050,27 +947,6 @@ bool migrate_params_check(MigrationParameters *params, Error **errp)
{
ERRP_GUARD();
- if (params->has_compress_level &&
- (params->compress_level > 9)) {
- error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "compress_level",
- "a value between 0 and 9");
- return false;
- }
-
- if (params->has_compress_threads && (params->compress_threads < 1)) {
- error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
- "compress_threads",
- "a value between 1 and 255");
- return false;
- }
-
- if (params->has_decompress_threads && (params->decompress_threads < 1)) {
- error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
- "decompress_threads",
- "a value between 1 and 255");
- return false;
- }
-
if (params->has_throttle_trigger_threshold &&
(params->throttle_trigger_threshold < 1 ||
params->throttle_trigger_threshold > 100)) {
@@ -1244,22 +1120,6 @@ static void migrate_params_test_apply(MigrateSetParameters *params,
/* TODO use QAPI_CLONE() instead of duplicating it inline */
- if (params->has_compress_level) {
- dest->compress_level = params->compress_level;
- }
-
- if (params->has_compress_threads) {
- dest->compress_threads = params->compress_threads;
- }
-
- if (params->has_compress_wait_thread) {
- dest->compress_wait_thread = params->compress_wait_thread;
- }
-
- if (params->has_decompress_threads) {
- dest->decompress_threads = params->decompress_threads;
- }
-
if (params->has_throttle_trigger_threshold) {
dest->throttle_trigger_threshold = params->throttle_trigger_threshold;
}
@@ -1364,30 +1224,6 @@ static void migrate_params_apply(MigrateSetParameters *params, Error **errp)
/* TODO use QAPI_CLONE() instead of duplicating it inline */
- if (params->has_compress_level) {
- warn_report("old compression is deprecated;"
- " use multifd compression methods instead");
- s->parameters.compress_level = params->compress_level;
- }
-
- if (params->has_compress_threads) {
- warn_report("old compression is deprecated;"
- " use multifd compression methods instead");
- s->parameters.compress_threads = params->compress_threads;
- }
-
- if (params->has_compress_wait_thread) {
- warn_report("old compression is deprecated;"
- " use multifd compression methods instead");
- s->parameters.compress_wait_thread = params->compress_wait_thread;
- }
-
- if (params->has_decompress_threads) {
- warn_report("old compression is deprecated;"
- " use multifd compression methods instead");
- s->parameters.decompress_threads = params->decompress_threads;
- }
-
if (params->has_throttle_trigger_threshold) {
s->parameters.throttle_trigger_threshold = params->throttle_trigger_threshold;
}
diff --git a/migration/options.h b/migration/options.h
index 3c56d70d07..4b21cc2669 100644
--- a/migration/options.h
+++ b/migration/options.h
@@ -26,7 +26,6 @@ extern Property migration_properties[];
bool migrate_auto_converge(void);
bool migrate_colo(void);
-bool migrate_compress(void);
bool migrate_dirty_bitmaps(void);
bool migrate_events(void);
bool migrate_mapped_ram(void);
@@ -67,13 +66,9 @@ const BitmapMigrationNodeAliasList *migrate_block_bitmap_mapping(void);
bool migrate_has_block_bitmap_mapping(void);
uint32_t migrate_checkpoint_delay(void);
-int migrate_compress_level(void);
-int migrate_compress_threads(void);
-int migrate_compress_wait_thread(void);
uint8_t migrate_cpu_throttle_increment(void);
uint8_t migrate_cpu_throttle_initial(void);
bool migrate_cpu_throttle_tailslow(void);
-int migrate_decompress_threads(void);
uint64_t migrate_downtime_limit(void);
uint8_t migrate_max_cpu_throttle(void);
uint64_t migrate_max_bandwidth(void);
diff --git a/migration/qemu-file.c b/migration/qemu-file.c
index a10882d47f..9ccbbb0099 100644
--- a/migration/qemu-file.c
+++ b/migration/qemu-file.c
@@ -778,84 +778,6 @@ uint64_t qemu_get_be64(QEMUFile *f)
return v;
}
-/* return the size after compression, or negative value on error */
-static int qemu_compress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
- const uint8_t *source, size_t source_len)
-{
- int err;
-
- err = deflateReset(stream);
- if (err != Z_OK) {
- return -1;
- }
-
- stream->avail_in = source_len;
- stream->next_in = (uint8_t *)source;
- stream->avail_out = dest_len;
- stream->next_out = dest;
-
- err = deflate(stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- return -1;
- }
-
- return stream->next_out - dest;
-}
-
-/* Compress size bytes of data start at p and store the compressed
- * data to the buffer of f.
- *
- * Since the file is dummy file with empty_ops, return -1 if f has no space to
- * save the compressed data.
- */
-ssize_t qemu_put_compression_data(QEMUFile *f, z_stream *stream,
- const uint8_t *p, size_t size)
-{
- ssize_t blen = IO_BUF_SIZE - f->buf_index - sizeof(int32_t);
-
- if (blen < compressBound(size)) {
- return -1;
- }
-
- blen = qemu_compress_data(stream, f->buf + f->buf_index + sizeof(int32_t),
- blen, p, size);
- if (blen < 0) {
- return -1;
- }
-
- qemu_put_be32(f, blen);
- add_buf_to_iovec(f, blen);
- return blen + sizeof(int32_t);
-}
-
-/* Put the data in the buffer of f_src to the buffer of f_des, and
- * then reset the buf_index of f_src to 0.
- */
-
-int qemu_put_qemu_file(QEMUFile *f_des, QEMUFile *f_src)
-{
- int len = 0;
-
- if (f_src->buf_index > 0) {
- len = f_src->buf_index;
- qemu_put_buffer(f_des, f_src->buf, f_src->buf_index);
- f_src->buf_index = 0;
- f_src->iovcnt = 0;
- }
- return len;
-}
-
-/*
- * Check if the writable buffer is empty
- */
-
-bool qemu_file_buffer_empty(QEMUFile *file)
-{
- assert(qemu_file_is_writable(file));
-
- return !file->iovcnt;
-}
-
/*
* Get a string whose length is determined by a single preceding byte
* A preallocated 256 byte buffer must be passed in.
diff --git a/migration/qemu-file.h b/migration/qemu-file.h
index 32fd4a34fd..11c2120edd 100644
--- a/migration/qemu-file.h
+++ b/migration/qemu-file.h
@@ -54,10 +54,6 @@ void qemu_put_buffer_async(QEMUFile *f, const uint8_t *buf, size_t size,
size_t coroutine_mixed_fn qemu_peek_buffer(QEMUFile *f, uint8_t **buf, size_t size, size_t offset);
size_t coroutine_mixed_fn qemu_get_buffer_in_place(QEMUFile *f, uint8_t **buf, size_t size);
-ssize_t qemu_put_compression_data(QEMUFile *f, z_stream *stream,
- const uint8_t *p, size_t size);
-int qemu_put_qemu_file(QEMUFile *f_des, QEMUFile *f_src);
-bool qemu_file_buffer_empty(QEMUFile *file);
/*
* Note that you can only peek continuous bytes from where the current pointer
diff --git a/migration/ram-compress.c b/migration/ram-compress.c
deleted file mode 100644
index fa4388f6a6..0000000000
--- a/migration/ram-compress.c
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- * QEMU System Emulator
- *
- * Copyright (c) 2003-2008 Fabrice Bellard
- * Copyright (c) 2011-2015 Red Hat Inc
- *
- * Authors:
- * Juan Quintela <quintela@xxxxxxxxxx>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "qemu/osdep.h"
-#include "qemu/cutils.h"
-
-#include "ram-compress.h"
-
-#include "qemu/error-report.h"
-#include "qemu/stats64.h"
-#include "migration.h"
-#include "options.h"
-#include "io/channel-null.h"
-#include "exec/target_page.h"
-#include "exec/ramblock.h"
-#include "ram.h"
-#include "migration-stats.h"
-
-static struct {
- int64_t pages;
- int64_t busy;
- double busy_rate;
- int64_t compressed_size;
- double compression_rate;
- /* compression statistics since the beginning of the period */
- /* amount of count that no free thread to compress data */
- uint64_t compress_thread_busy_prev;
- /* amount bytes after compression */
- uint64_t compressed_size_prev;
- /* amount of compressed pages */
- uint64_t compress_pages_prev;
-} compression_counters;
-
-static CompressParam *comp_param;
-static QemuThread *compress_threads;
-/* comp_done_cond is used to wake up the migration thread when
- * one of the compression threads has finished the compression.
- * comp_done_lock is used to co-work with comp_done_cond.
- */
-static QemuMutex comp_done_lock;
-static QemuCond comp_done_cond;
-
-struct DecompressParam {
- bool done;
- bool quit;
- QemuMutex mutex;
- QemuCond cond;
- void *des;
- uint8_t *compbuf;
- int len;
- z_stream stream;
-};
-typedef struct DecompressParam DecompressParam;
-
-static QEMUFile *decomp_file;
-static DecompressParam *decomp_param;
-static QemuThread *decompress_threads;
-static QemuMutex decomp_done_lock;
-static QemuCond decomp_done_cond;
-
-static CompressResult do_compress_ram_page(QEMUFile *f, z_stream *stream,
- RAMBlock *block, ram_addr_t offset,
- uint8_t *source_buf);
-
-static void *do_data_compress(void *opaque)
-{
- CompressParam *param = opaque;
- RAMBlock *block;
- ram_addr_t offset;
- CompressResult result;
-
- qemu_mutex_lock(¶m->mutex);
- while (!param->quit) {
- if (param->trigger) {
- block = param->block;
- offset = param->offset;
- param->trigger = false;
- qemu_mutex_unlock(¶m->mutex);
-
- result = do_compress_ram_page(param->file, ¶m->stream,
- block, offset, param->originbuf);
-
- qemu_mutex_lock(&comp_done_lock);
- param->done = true;
- param->result = result;
- qemu_cond_signal(&comp_done_cond);
- qemu_mutex_unlock(&comp_done_lock);
-
- qemu_mutex_lock(¶m->mutex);
- } else {
- qemu_cond_wait(¶m->cond, ¶m->mutex);
- }
- }
- qemu_mutex_unlock(¶m->mutex);
-
- return NULL;
-}
-
-void compress_threads_save_cleanup(void)
-{
- int i, thread_count;
-
- if (!migrate_compress() || !comp_param) {
- return;
- }
-
- thread_count = migrate_compress_threads();
- for (i = 0; i < thread_count; i++) {
- /*
- * we use it as a indicator which shows if the thread is
- * properly init'd or not
- */
- if (!comp_param[i].file) {
- break;
- }
-
- qemu_mutex_lock(&comp_param[i].mutex);
- comp_param[i].quit = true;
- qemu_cond_signal(&comp_param[i].cond);
- qemu_mutex_unlock(&comp_param[i].mutex);
-
- qemu_thread_join(compress_threads + i);
- qemu_mutex_destroy(&comp_param[i].mutex);
- qemu_cond_destroy(&comp_param[i].cond);
- deflateEnd(&comp_param[i].stream);
- g_free(comp_param[i].originbuf);
- qemu_fclose(comp_param[i].file);
- comp_param[i].file = NULL;
- }
- qemu_mutex_destroy(&comp_done_lock);
- qemu_cond_destroy(&comp_done_cond);
- g_free(compress_threads);
- g_free(comp_param);
- compress_threads = NULL;
- comp_param = NULL;
-}
-
-int compress_threads_save_setup(void)
-{
- int i, thread_count;
-
- if (!migrate_compress()) {
- return 0;
- }
- thread_count = migrate_compress_threads();
- compress_threads = g_new0(QemuThread, thread_count);
- comp_param = g_new0(CompressParam, thread_count);
- qemu_cond_init(&comp_done_cond);
- qemu_mutex_init(&comp_done_lock);
- for (i = 0; i < thread_count; i++) {
- comp_param[i].originbuf = g_try_malloc(qemu_target_page_size());
- if (!comp_param[i].originbuf) {
- goto exit;
- }
-
- if (deflateInit(&comp_param[i].stream,
- migrate_compress_level()) != Z_OK) {
- g_free(comp_param[i].originbuf);
- goto exit;
- }
-
- /* comp_param[i].file is just used as a dummy buffer to save data,
- * set its ops to empty.
- */
- comp_param[i].file = qemu_file_new_output(
- QIO_CHANNEL(qio_channel_null_new()));
- comp_param[i].done = true;
- comp_param[i].quit = false;
- qemu_mutex_init(&comp_param[i].mutex);
- qemu_cond_init(&comp_param[i].cond);
- qemu_thread_create(compress_threads + i, "compress",
- do_data_compress, comp_param + i,
- QEMU_THREAD_JOINABLE);
- }
- return 0;
-
-exit:
- compress_threads_save_cleanup();
- return -1;
-}
-
-static CompressResult do_compress_ram_page(QEMUFile *f, z_stream *stream,
- RAMBlock *block, ram_addr_t offset,
- uint8_t *source_buf)
-{
- uint8_t *p = block->host + offset;
- size_t page_size = qemu_target_page_size();
- int ret;
-
- assert(qemu_file_buffer_empty(f));
-
- if (buffer_is_zero(p, page_size)) {
- return RES_ZEROPAGE;
- }
-
- /*
- * copy it to a internal buffer to avoid it being modified by VM
- * so that we can catch up the error during compression and
- * decompression
- */
- memcpy(source_buf, p, page_size);
- ret = qemu_put_compression_data(f, stream, source_buf, page_size);
- if (ret < 0) {
- qemu_file_set_error(migrate_get_current()->to_dst_file, ret);
- error_report("compressed data failed!");
- qemu_fflush(f);
- return RES_NONE;
- }
- return RES_COMPRESS;
-}
-
-static inline void compress_reset_result(CompressParam *param)
-{
- param->result = RES_NONE;
- param->block = NULL;
- param->offset = 0;
-}
-
-void compress_flush_data(void)
-{
- int thread_count = migrate_compress_threads();
-
- if (!migrate_compress()) {
- return;
- }
-
- qemu_mutex_lock(&comp_done_lock);
- for (int i = 0; i < thread_count; i++) {
- while (!comp_param[i].done) {
- qemu_cond_wait(&comp_done_cond, &comp_done_lock);
- }
- }
- qemu_mutex_unlock(&comp_done_lock);
-
- for (int i = 0; i < thread_count; i++) {
- qemu_mutex_lock(&comp_param[i].mutex);
- if (!comp_param[i].quit) {
- CompressParam *param = &comp_param[i];
- compress_send_queued_data(param);
- assert(qemu_file_buffer_empty(param->file));
- compress_reset_result(param);
- }
- qemu_mutex_unlock(&comp_param[i].mutex);
- }
-}
-
-static inline void set_compress_params(CompressParam *param, RAMBlock *block,
- ram_addr_t offset)
-{
- param->block = block;
- param->offset = offset;
- param->trigger = true;
-}
-
-/*
- * Return true when it compress a page
- */
-bool compress_page_with_multi_thread(RAMBlock *block, ram_addr_t offset,
- int (send_queued_data(CompressParam *)))
-{
- int thread_count;
- bool wait = migrate_compress_wait_thread();
-
- thread_count = migrate_compress_threads();
- qemu_mutex_lock(&comp_done_lock);
-
- while (true) {
- for (int i = 0; i < thread_count; i++) {
- if (comp_param[i].done) {
- CompressParam *param = &comp_param[i];
- qemu_mutex_lock(¶m->mutex);
- param->done = false;
- send_queued_data(param);
- assert(qemu_file_buffer_empty(param->file));
- compress_reset_result(param);
- set_compress_params(param, block, offset);
-
- qemu_cond_signal(¶m->cond);
- qemu_mutex_unlock(¶m->mutex);
- qemu_mutex_unlock(&comp_done_lock);
- return true;
- }
- }
- if (!wait) {
- qemu_mutex_unlock(&comp_done_lock);
- compression_counters.busy++;
- return false;
- }
- /*
- * wait for a free thread if the user specifies
- * 'compress-wait-thread', otherwise we will post the page out
- * in the main thread as normal page.
- */
- qemu_cond_wait(&comp_done_cond, &comp_done_lock);
- }
-}
-
-/* return the size after decompression, or negative value on error */
-static int
-qemu_uncompress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
- const uint8_t *source, size_t source_len)
-{
- int err;
-
- err = inflateReset(stream);
- if (err != Z_OK) {
- return -1;
- }
-
- stream->avail_in = source_len;
- stream->next_in = (uint8_t *)source;
- stream->avail_out = dest_len;
- stream->next_out = dest;
-
- err = inflate(stream, Z_NO_FLUSH);
- if (err != Z_STREAM_END) {
- return -1;
- }
-
- return stream->total_out;
-}
-
-static void *do_data_decompress(void *opaque)
-{
- DecompressParam *param = opaque;
- unsigned long pagesize;
- uint8_t *des;
- int len, ret;
-
- qemu_mutex_lock(¶m->mutex);
- while (!param->quit) {
- if (param->des) {
- des = param->des;
- len = param->len;
- param->des = 0;
- qemu_mutex_unlock(¶m->mutex);
-
- pagesize = qemu_target_page_size();
-
- ret = qemu_uncompress_data(¶m->stream, des, pagesize,
- param->compbuf, len);
- if (ret < 0 && migrate_get_current()->decompress_error_check) {
- error_report("decompress data failed");
- qemu_file_set_error(decomp_file, ret);
- }
-
- qemu_mutex_lock(&decomp_done_lock);
- param->done = true;
- qemu_cond_signal(&decomp_done_cond);
- qemu_mutex_unlock(&decomp_done_lock);
-
- qemu_mutex_lock(¶m->mutex);
- } else {
- qemu_cond_wait(¶m->cond, ¶m->mutex);
- }
- }
- qemu_mutex_unlock(¶m->mutex);
-
- return NULL;
-}
-
-int wait_for_decompress_done(void)
-{
- if (!migrate_compress()) {
- return 0;
- }
-
- int thread_count = migrate_decompress_threads();
- qemu_mutex_lock(&decomp_done_lock);
- for (int i = 0; i < thread_count; i++) {
- while (!decomp_param[i].done) {
- qemu_cond_wait(&decomp_done_cond, &decomp_done_lock);
- }
- }
- qemu_mutex_unlock(&decomp_done_lock);
- return qemu_file_get_error(decomp_file);
-}
-
-void compress_threads_load_cleanup(void)
-{
- int i, thread_count;
-
- if (!migrate_compress()) {
- return;
- }
- thread_count = migrate_decompress_threads();
- for (i = 0; i < thread_count; i++) {
- /*
- * we use it as a indicator which shows if the thread is
- * properly init'd or not
- */
- if (!decomp_param[i].compbuf) {
- break;
- }
-
- qemu_mutex_lock(&decomp_param[i].mutex);
- decomp_param[i].quit = true;
- qemu_cond_signal(&decomp_param[i].cond);
- qemu_mutex_unlock(&decomp_param[i].mutex);
- }
- for (i = 0; i < thread_count; i++) {
- if (!decomp_param[i].compbuf) {
- break;
- }
-
- qemu_thread_join(decompress_threads + i);
- qemu_mutex_destroy(&decomp_param[i].mutex);
- qemu_cond_destroy(&decomp_param[i].cond);
- inflateEnd(&decomp_param[i].stream);
- g_free(decomp_param[i].compbuf);
- decomp_param[i].compbuf = NULL;
- }
- g_free(decompress_threads);
- g_free(decomp_param);
- decompress_threads = NULL;
- decomp_param = NULL;
- decomp_file = NULL;
-}
-
-int compress_threads_load_setup(QEMUFile *f)
-{
- int i, thread_count;
-
- if (!migrate_compress()) {
- return 0;
- }
-
- /*
- * set compression_counters memory to zero for a new migration
- */
- memset(&compression_counters, 0, sizeof(compression_counters));
-
- thread_count = migrate_decompress_threads();
- decompress_threads = g_new0(QemuThread, thread_count);
- decomp_param = g_new0(DecompressParam, thread_count);
- qemu_mutex_init(&decomp_done_lock);
- qemu_cond_init(&decomp_done_cond);
- decomp_file = f;
- for (i = 0; i < thread_count; i++) {
- if (inflateInit(&decomp_param[i].stream) != Z_OK) {
- goto exit;
- }
-
- size_t compbuf_size = compressBound(qemu_target_page_size());
- decomp_param[i].compbuf = g_malloc0(compbuf_size);
- qemu_mutex_init(&decomp_param[i].mutex);
- qemu_cond_init(&decomp_param[i].cond);
- decomp_param[i].done = true;
- decomp_param[i].quit = false;
- qemu_thread_create(decompress_threads + i, "decompress",
- do_data_decompress, decomp_param + i,
- QEMU_THREAD_JOINABLE);
- }
- return 0;
-exit:
- compress_threads_load_cleanup();
- return -1;
-}
-
-void decompress_data_with_multi_threads(QEMUFile *f, void *host, int len)
-{
- int thread_count = migrate_decompress_threads();
- QEMU_LOCK_GUARD(&decomp_done_lock);
- while (true) {
- for (int i = 0; i < thread_count; i++) {
- if (decomp_param[i].done) {
- decomp_param[i].done = false;
- qemu_mutex_lock(&decomp_param[i].mutex);
- qemu_get_buffer(f, decomp_param[i].compbuf, len);
- decomp_param[i].des = host;
- decomp_param[i].len = len;
- qemu_cond_signal(&decomp_param[i].cond);
- qemu_mutex_unlock(&decomp_param[i].mutex);
- return;
- }
- }
- qemu_cond_wait(&decomp_done_cond, &decomp_done_lock);
- }
-}
-
-void populate_compress(MigrationInfo *info)
-{
- if (!migrate_compress()) {
- return;
- }
- info->compression = g_malloc0(sizeof(*info->compression));
- info->compression->pages = compression_counters.pages;
- info->compression->busy = compression_counters.busy;
- info->compression->busy_rate = compression_counters.busy_rate;
- info->compression->compressed_size = compression_counters.compressed_size;
- info->compression->compression_rate = compression_counters.compression_rate;
-}
-
-uint64_t compress_ram_pages(void)
-{
- return compression_counters.pages;
-}
-
-void update_compress_thread_counts(const CompressParam *param, int bytes_xmit)
-{
- ram_transferred_add(bytes_xmit);
-
- if (param->result == RES_ZEROPAGE) {
- stat64_add(&mig_stats.zero_pages, 1);
- return;
- }
-
- /* 8 means a header with RAM_SAVE_FLAG_CONTINUE. */
- compression_counters.compressed_size += bytes_xmit - 8;
- compression_counters.pages++;
-}
-
-void compress_update_rates(uint64_t page_count)
-{
- if (!migrate_compress()) {
- return;
- }
- compression_counters.busy_rate = (double)(compression_counters.busy -
- compression_counters.compress_thread_busy_prev) / page_count;
- compression_counters.compress_thread_busy_prev =
- compression_counters.busy;
-
- double compressed_size = compression_counters.compressed_size -
- compression_counters.compressed_size_prev;
- if (compressed_size) {
- double uncompressed_size = (compression_counters.pages -
- compression_counters.compress_pages_prev) *
- qemu_target_page_size();
-
- /* Compression-Ratio = Uncompressed-size / Compressed-size */
- compression_counters.compression_rate =
- uncompressed_size / compressed_size;
-
- compression_counters.compress_pages_prev =
- compression_counters.pages;
- compression_counters.compressed_size_prev =
- compression_counters.compressed_size;
- }
-}
diff --git a/migration/ram-compress.h b/migration/ram-compress.h
deleted file mode 100644
index 0d89a2f55e..0000000000
--- a/migration/ram-compress.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * QEMU System Emulator
- *
- * Copyright (c) 2003-2008 Fabrice Bellard
- * Copyright (c) 2011-2015 Red Hat Inc
- *
- * Authors:
- * Juan Quintela <quintela@xxxxxxxxxx>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef QEMU_MIGRATION_COMPRESS_H
-#define QEMU_MIGRATION_COMPRESS_H
-
-#include "qemu-file.h"
-#include "qapi/qapi-types-migration.h"
-
-enum CompressResult {
- RES_NONE = 0,
- RES_ZEROPAGE = 1,
- RES_COMPRESS = 2
-};
-typedef enum CompressResult CompressResult;
-
-struct CompressParam {
- bool done;
- bool quit;
- bool trigger;
- CompressResult result;
- QEMUFile *file;
- QemuMutex mutex;
- QemuCond cond;
- RAMBlock *block;
- ram_addr_t offset;
-
- /* internally used fields */
- z_stream stream;
- uint8_t *originbuf;
-};
-typedef struct CompressParam CompressParam;
-
-void compress_threads_save_cleanup(void);
-int compress_threads_save_setup(void);
-
-bool compress_page_with_multi_thread(RAMBlock *block, ram_addr_t offset,
- int (send_queued_data(CompressParam *)));
-
-int wait_for_decompress_done(void);
-void compress_threads_load_cleanup(void);
-int compress_threads_load_setup(QEMUFile *f);
-void decompress_data_with_multi_threads(QEMUFile *f, void *host, int len);
-
-void populate_compress(MigrationInfo *info);
-uint64_t compress_ram_pages(void);
-void update_compress_thread_counts(const CompressParam *param, int bytes_xmit);
-void compress_update_rates(uint64_t page_count);
-int compress_send_queued_data(CompressParam *param);
-void compress_flush_data(void);
-
-#endif
diff --git a/migration/ram.c b/migration/ram.c
index 5debb2e455..a2b81002cd 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -33,7 +33,6 @@
#include "qemu/madvise.h"
#include "qemu/main-loop.h"
#include "xbzrle.h"
-#include "ram-compress.h"
#include "ram.h"
#include "migration.h"
#include "migration-stats.h"
@@ -77,9 +76,10 @@
* worked for pages that were filled with the same char. We switched
* it to only search for the zero value. And to avoid confusion with
* RAM_SAVE_FLAG_COMPRESS_PAGE just rename it.
- */
-/*
- * RAM_SAVE_FLAG_FULL was obsoleted in 2009, it can be reused now
+ *
+ * RAM_SAVE_FLAG_FULL was obsoleted in 2009.
+ *
+ * RAM_SAVE_FLAG_COMPRESS_PAGE (0x100) was removed in QEMU 9.1.
*/
#define RAM_SAVE_FLAG_FULL 0x01
#define RAM_SAVE_FLAG_ZERO 0x02
@@ -89,7 +89,6 @@
#define RAM_SAVE_FLAG_CONTINUE 0x20
#define RAM_SAVE_FLAG_XBZRLE 0x40
/* 0x80 is reserved in rdma.h for RAM_SAVE_FLAG_HOOK */
-#define RAM_SAVE_FLAG_COMPRESS_PAGE 0x100
#define RAM_SAVE_FLAG_MULTIFD_FLUSH 0x200
/* We can't use any flag that is bigger than 0x200 */
@@ -690,8 +689,7 @@ static int save_xbzrle_page(RAMState *rs, PageSearchStatus *pss,
qemu_put_buffer(file, XBZRLE.encoded_buf, encoded_len);
bytes_xbzrle += encoded_len + 1 + 2;
/*
- * Like compressed_size (please see update_compress_thread_counts),
- * the xbzrle encoded bytes don't count the 8 byte header with
+ * The xbzrle encoded bytes don't count the 8 byte header with
* RAM_SAVE_FLAG_CONTINUE.
*/
xbzrle_counters.bytes += bytes_xbzrle - 8;
@@ -949,7 +947,7 @@ uint64_t ram_get_total_transferred_pages(void)
{
return stat64_get(&mig_stats.normal_pages) +
stat64_get(&mig_stats.zero_pages) +
- compress_ram_pages() + xbzrle_counters.pages;
+ xbzrle_counters.pages;
}
static void migration_update_rates(RAMState *rs, int64_t end_time)
@@ -982,7 +980,6 @@ static void migration_update_rates(RAMState *rs, int64_t end_time)
rs->xbzrle_pages_prev = xbzrle_counters.pages;
rs->xbzrle_bytes_prev = xbzrle_counters.bytes;
}
- compress_update_rates(page_count);
}
/*
@@ -1288,41 +1285,6 @@ static int ram_save_multifd_page(RAMBlock *block, ram_addr_t offset)
return 1;
}
-int compress_send_queued_data(CompressParam *param)
-{
- PageSearchStatus *pss = &ram_state->pss[RAM_CHANNEL_PRECOPY];
- MigrationState *ms = migrate_get_current();
- QEMUFile *file = ms->to_dst_file;
- int len = 0;
-
- RAMBlock *block = param->block;
- ram_addr_t offset = param->offset;
-
- if (param->result == RES_NONE) {
- return 0;
- }
-
- assert(block == pss->last_sent_block);
-
- if (param->result == RES_ZEROPAGE) {
- assert(qemu_file_buffer_empty(param->file));
- len += save_page_header(pss, file, block, offset | RAM_SAVE_FLAG_ZERO);
- qemu_put_byte(file, 0);
- len += 1;
- ram_release_page(block->idstr, offset);
- } else if (param->result == RES_COMPRESS) {
- assert(!qemu_file_buffer_empty(param->file));
- len += save_page_header(pss, file, block,
- offset | RAM_SAVE_FLAG_COMPRESS_PAGE);
- len += qemu_put_qemu_file(file, param->file);
- } else {
- abort();
- }
-
- update_compress_thread_counts(param, len);
-
- return len;
-}
#define PAGE_ALL_CLEAN 0
#define PAGE_TRY_AGAIN 1
@@ -1374,16 +1336,6 @@ static int find_dirty_block(RAMState *rs, PageSearchStatus *pss)
qemu_fflush(f);
}
}
- /*
- * If memory migration starts over, we will meet a dirtied page
- * which may still exists in compression threads's ring, so we
- * should flush the compressed data to make sure the new page
- * is not overwritten by the old one in the destination.
- *
- * Also If xbzrle is on, stop using the data compression at this
- * point. In theory, xbzrle can do better than compression.
- */
- compress_flush_data();
/* Hit the end of the list */
pss->block = QLIST_FIRST_RCU(&ram_list.blocks);
@@ -2034,37 +1986,6 @@ int ram_save_queue_pages(const char *rbname, ram_addr_t start, ram_addr_t len,
return 0;
}
-/*
- * try to compress the page before posting it out, return true if the page
- * has been properly handled by compression, otherwise needs other
- * paths to handle it
- */
-static bool save_compress_page(RAMState *rs, PageSearchStatus *pss,
- ram_addr_t offset)
-{
- if (!migrate_compress()) {
- return false;
- }
-
- /*
- * When starting the process of a new block, the first page of
- * the block should be sent out before other pages in the same
- * block, and all the pages in last block should have been sent
- * out, keeping this order is important, because the 'cont' flag
- * is used to avoid resending the block name.
- *
- * We post the fist page as normal page as compression will take
- * much CPU resource.
- */
- if (pss->block != pss->last_sent_block) {
- compress_flush_data();
- return false;
- }
-
- return compress_page_with_multi_thread(pss->block, offset,
- compress_send_queued_data);
-}
-
/**
* ram_save_target_page_legacy: save one target page
*
@@ -2082,10 +2003,6 @@ static int ram_save_target_page_legacy(RAMState *rs, PageSearchStatus *pss)
return res;
}
- if (save_compress_page(rs, pss, offset)) {
- return 1;
- }
-
if (save_zero_page(rs, pss, offset)) {
return 1;
}
@@ -2470,7 +2387,6 @@ static void ram_save_cleanup(void *opaque)
ram_bitmaps_destroy();
xbzrle_cleanup();
- compress_threads_save_cleanup();
ram_state_cleanup(rsp);
g_free(migration_ops);
migration_ops = NULL;
@@ -3089,15 +3005,9 @@ static int ram_save_setup(QEMUFile *f, void *opaque, Error **errp)
RAMBlock *block;
int ret, max_hg_page_size;
- if (compress_threads_save_setup()) {
- error_setg(errp, "%s: failed to start compress threads", __func__);
- return -1;
- }
-
/* migration has already setup the bitmap, reuse it. */
if (!migration_in_colo_state()) {
if (ram_init_all(rsp, errp) != 0) {
- compress_threads_save_cleanup();
return -1;
}
}
@@ -3268,14 +3178,6 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
rs->target_page_count += pages;
- /*
- * During postcopy, it is necessary to make sure one whole host
- * page is sent in one chunk.
- */
- if (migrate_postcopy_ram()) {
- compress_flush_data();
- }
-
/*
* we want to check in the 1st loop, just in case it was the 1st
* time and we had to sync the dirty bitmap.
@@ -3374,8 +3276,6 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
}
qemu_mutex_unlock(&rs->bitmap_mutex);
- compress_flush_data();
-
ret = rdma_registration_stop(f, RAM_CONTROL_FINISH);
if (ret < 0) {
qemu_file_set_error(f, ret);
@@ -3789,7 +3689,6 @@ int ram_load_postcopy(QEMUFile *f, int channel)
void *place_source = NULL;
RAMBlock *block = NULL;
uint8_t ch;
- int len;
addr = qemu_get_be64(f);
@@ -3806,8 +3705,7 @@ int ram_load_postcopy(QEMUFile *f, int channel)
addr &= TARGET_PAGE_MASK;
trace_ram_load_postcopy_loop(channel, (uint64_t)addr, flags);
- if (flags & (RAM_SAVE_FLAG_ZERO | RAM_SAVE_FLAG_PAGE |
- RAM_SAVE_FLAG_COMPRESS_PAGE)) {
+ if (flags & (RAM_SAVE_FLAG_ZERO | RAM_SAVE_FLAG_PAGE)) {
block = ram_block_from_stream(mis, f, flags, channel);
if (!block) {
ret = -EINVAL;
@@ -3902,16 +3800,6 @@ int ram_load_postcopy(QEMUFile *f, int channel)
TARGET_PAGE_SIZE);
}
break;
- case RAM_SAVE_FLAG_COMPRESS_PAGE:
- tmp_page->all_zero = false;
- len = qemu_get_be32(f);
- if (len < 0 || len > compressBound(TARGET_PAGE_SIZE)) {
- error_report("Invalid compressed data length: %d", len);
- ret = -EINVAL;
- break;
- }
- decompress_data_with_multi_threads(f, page_buffer, len);
- break;
case RAM_SAVE_FLAG_MULTIFD_FLUSH:
multifd_recv_sync_main();
break;
@@ -3929,11 +3817,6 @@ int ram_load_postcopy(QEMUFile *f, int channel)
break;
}
- /* Got the whole host page, wait for decompress before placing. */
- if (place_needed) {
- ret |= wait_for_decompress_done();
- }
-
/* Detect for any possible file errors */
if (!ret && qemu_file_get_error(f)) {
ret = qemu_file_get_error(f);
@@ -4238,11 +4121,7 @@ static int parse_ramblocks(QEMUFile *f, ram_addr_t total_ram_bytes)
static int ram_load_precopy(QEMUFile *f)
{
MigrationIncomingState *mis = migration_incoming_get_current();
- int flags = 0, ret = 0, invalid_flags = 0, len = 0, i = 0;
-
- if (!migrate_compress()) {
- invalid_flags |= RAM_SAVE_FLAG_COMPRESS_PAGE;
- }
+ int flags = 0, ret = 0, invalid_flags = 0, i = 0;
if (migrate_mapped_ram()) {
invalid_flags |= (RAM_SAVE_FLAG_HOOK | RAM_SAVE_FLAG_MULTIFD_FLUSH |
@@ -4279,16 +4158,12 @@ static int ram_load_precopy(QEMUFile *f)
if (flags & invalid_flags) {
error_report("Unexpected RAM flags: %d", flags & invalid_flags);
- if (flags & invalid_flags & RAM_SAVE_FLAG_COMPRESS_PAGE) {
- error_report("Received an unexpected compressed page");
- }
-
ret = -EINVAL;
break;
}
if (flags & (RAM_SAVE_FLAG_ZERO | RAM_SAVE_FLAG_PAGE |
- RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
+ RAM_SAVE_FLAG_XBZRLE)) {
RAMBlock *block = ram_block_from_stream(mis, f, flags,
RAM_CHANNEL_PRECOPY);
@@ -4357,16 +4232,6 @@ static int ram_load_precopy(QEMUFile *f)
qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
break;
- case RAM_SAVE_FLAG_COMPRESS_PAGE:
- len = qemu_get_be32(f);
- if (len < 0 || len > compressBound(TARGET_PAGE_SIZE)) {
- error_report("Invalid compressed data length: %d", len);
- ret = -EINVAL;
- break;
- }
- decompress_data_with_multi_threads(f, host, len);
- break;
-
case RAM_SAVE_FLAG_XBZRLE:
if (load_xbzrle(f, addr, host) < 0) {
error_report("Failed to decompress XBZRLE page at "
@@ -4408,7 +4273,6 @@ static int ram_load_precopy(QEMUFile *f)
}
}
- ret |= wait_for_decompress_done();
return ret;
}
diff --git a/qapi/migration.json b/qapi/migration.json
index 10e13d0b17..fc4b13050a 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -229,10 +229,6 @@
# This is only present when the postcopy-blocktime migration
# capability is enabled. (Since 3.0)
#
-# @compression: migration compression statistics, only returned if
-# compression feature is on and status is 'active' or 'completed'
-# (Since 3.1)
-#
# @socket-address: Only used for tcp, to know what the real port is
# (Since 4.0)
#
@@ -257,13 +253,6 @@
# average memory load of the virtual CPU indirectly. Note that
# zero means guest doesn't dirty memory. (Since 8.1)
#
-# Features:
-#
-# @deprecated: Member @compression is deprecated because it is
-# unreliable and untested. It is recommended to use multifd
-# migration, which offers an alternative compression
-# implementation that is reliable and tested.
-#
# Since: 0.14
##
{ 'struct': 'MigrationInfo',
@@ -279,7 +268,6 @@
'*blocked-reasons': ['str'],
'*postcopy-blocktime': 'uint32',
'*postcopy-vcpu-blocktime': ['uint32'],
- '*compression': { 'type': 'CompressionStats', 'features': [ 'deprecated' ] },
'*socket-address': ['SocketAddress'],
'*dirty-limit-throttle-time-per-round': 'uint64',
'*dirty-limit-ring-full-time': 'uint64'} }
@@ -401,14 +389,6 @@
# capability on the source VM. The feature is disabled by default.
# (since 1.6)
#
-# @compress: Use multiple compression threads to accelerate live
-# migration. This feature can help to reduce the migration
-# traffic, by sending compressed pages. Please note that if
-# compress and xbzrle are both on, compress only takes effect in
-# the ram bulk stage, after that, it will be disabled and only
-# xbzrle takes effect, this can help to minimize migration
-# traffic. The feature is disabled by default. (since 2.4)
-#
# @events: generate events for each migration state change (since 2.4)
#
# @auto-converge: If enabled, QEMU will automatically throttle down
@@ -491,18 +471,12 @@
#
# Features:
#
-# @deprecated: Member @compress is deprecated because it is unreliable
-# and untested. It is recommended to use multifd migration, which
-# offers an alternative compression implementation that is
-# reliable and tested.
-#
# @unstable: Members @x-colo and @x-ignore-shared are experimental.
#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
- { 'name': 'compress', 'features': [ 'deprecated' ] },
'events', 'postcopy-ram',
{ 'name': 'x-colo', 'features': [ 'unstable' ] },
'release-ram',
@@ -562,7 +536,6 @@
# {"state": false, "capability": "rdma-pin-all"},
# {"state": false, "capability": "auto-converge"},
# {"state": false, "capability": "zero-blocks"},
-# {"state": false, "capability": "compress"},
# {"state": true, "capability": "events"},
# {"state": false, "capability": "postcopy-ram"},
# {"state": false, "capability": "x-colo"}
@@ -710,27 +683,6 @@
# @announce-step: Increase in delay (in milliseconds) between
# subsequent packets in the announcement (Since 4.0)
#
-# @compress-level: Set the compression level to be used in live
-# migration, the compression level is an integer between 0 and 9,
-# where 0 means no compression, 1 means the best compression
-# speed, and 9 means best compression ratio which will consume
-# more CPU.
-#
-# @compress-threads: Set compression thread count to be used in live
-# migration, the compression thread count is an integer between 1
-# and 255.
-#
-# @compress-wait-thread: Controls behavior when all compression
-# threads are currently busy. If true (default), wait for a free
-# compression thread to become available; otherwise, send the page
-# uncompressed. (Since 3.1)
-#
-# @decompress-threads: Set decompression thread count to be used in
-# live migration, the decompression thread count is an integer
-# between 1 and 255. Usually, decompression is at least 4 times as
-# fast as compression, so set the decompress-threads to the number
-# about 1/4 of compress-threads is adequate.
-#
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and
# bytes_xfer_period to trigger throttling. It is expressed as
# percentage. The default value is 50. (Since 5.0)
@@ -862,10 +814,6 @@
#
# Features:
#
-# @deprecated: Members @compress-level, @compress-threads,
-# @decompress-threads and @compress-wait-thread are deprecated
-# because @compression is deprecated.
-#
# @unstable: Members @x-checkpoint-delay and
# @x-vcpu-dirty-limit-period are experimental.
#
@@ -874,10 +822,6 @@
{ 'enum': 'MigrationParameter',
'data': ['announce-initial', 'announce-max',
'announce-rounds', 'announce-step',
- { 'name': 'compress-level', 'features': [ 'deprecated' ] },
- { 'name': 'compress-threads', 'features': [ 'deprecated' ] },
- { 'name': 'decompress-threads', 'features': [ 'deprecated' ] },
- { 'name': 'compress-wait-thread', 'features': [ 'deprecated' ] },
'throttle-trigger-threshold',
'cpu-throttle-initial', 'cpu-throttle-increment',
'cpu-throttle-tailslow',
@@ -909,27 +853,6 @@
# @announce-step: Increase in delay (in milliseconds) between
# subsequent packets in the announcement (Since 4.0)
#
-# @compress-level: Set the compression level to be used in live
-# migration, the compression level is an integer between 0 and 9,
-# where 0 means no compression, 1 means the best compression
-# speed, and 9 means best compression ratio which will consume
-# more CPU.
-#
-# @compress-threads: Set compression thread count to be used in live
-# migration, the compression thread count is an integer between 1
-# and 255.
-#
-# @compress-wait-thread: Controls behavior when all compression
-# threads are currently busy. If true (default), wait for a free
-# compression thread to become available; otherwise, send the page
-# uncompressed. (Since 3.1)
-#
-# @decompress-threads: Set decompression thread count to be used in
-# live migration, the decompression thread count is an integer
-# between 1 and 255. Usually, decompression is at least 4 times as
-# fast as compression, so set the decompress-threads to the number
-# about 1/4 of compress-threads is adequate.
-#
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and
# bytes_xfer_period to trigger throttling. It is expressed as
# percentage. The default value is 50. (Since 5.0)
@@ -1061,10 +984,6 @@
#
# Features:
#
-# @deprecated: Members @compress-level, @compress-threads,
-# @decompress-threads and @compress-wait-thread are deprecated
-# because @compression is deprecated.
-#
# @unstable: Members @x-checkpoint-delay and
# @x-vcpu-dirty-limit-period are experimental.
#
@@ -1078,14 +997,6 @@
'*announce-max': 'size',
'*announce-rounds': 'size',
'*announce-step': 'size',
- '*compress-level': { 'type': 'uint8',
- 'features': [ 'deprecated' ] },
- '*compress-threads': { 'type': 'uint8',
- 'features': [ 'deprecated' ] },
- '*compress-wait-thread': { 'type': 'bool',
- 'features': [ 'deprecated' ] },
- '*decompress-threads': { 'type': 'uint8',
- 'features': [ 'deprecated' ] },
'*throttle-trigger-threshold': 'uint8',
'*cpu-throttle-initial': 'uint8',
'*cpu-throttle-increment': 'uint8',
@@ -1145,17 +1056,6 @@
# @announce-step: Increase in delay (in milliseconds) between
# subsequent packets in the announcement (Since 4.0)
#
-# @compress-level: compression level
-#
-# @compress-threads: compression thread count
-#
-# @compress-wait-thread: Controls behavior when all compression
-# threads are currently busy. If true (default), wait for a free
-# compression thread to become available; otherwise, send the page
-# uncompressed. (Since 3.1)
-#
-# @decompress-threads: decompression thread count
-#
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and
# bytes_xfer_period to trigger throttling. It is expressed as
# percentage. The default value is 50. (Since 5.0)
@@ -1283,10 +1183,6 @@
#
# Features:
#
-# @deprecated: Members @compress-level, @compress-threads,
-# @decompress-threads and @compress-wait-thread are deprecated
-# because @compression is deprecated.
-#
# @unstable: Members @x-checkpoint-delay and
# @x-vcpu-dirty-limit-period are experimental.
#
@@ -1297,14 +1193,6 @@
'*announce-max': 'size',
'*announce-rounds': 'size',
'*announce-step': 'size',
- '*compress-level': { 'type': 'uint8',
- 'features': [ 'deprecated' ] },
- '*compress-threads': { 'type': 'uint8',
- 'features': [ 'deprecated' ] },
- '*compress-wait-thread': { 'type': 'bool',
- 'features': [ 'deprecated' ] },
- '*decompress-threads': { 'type': 'uint8',
- 'features': [ 'deprecated' ] },
'*throttle-trigger-threshold': 'uint8',
'*cpu-throttle-initial': 'uint8',
'*cpu-throttle-increment': 'uint8',
diff --git a/tests/qtest/migration-test.c b/tests/qtest/migration-test.c
index 5d6d8cd634..7a1345f80f 100644
--- a/tests/qtest/migration-test.c
+++ b/tests/qtest/migration-test.c
@@ -427,38 +427,6 @@ static void migrate_set_parameter_str(QTestState *who, const char *parameter,
migrate_check_parameter_str(who, parameter, value);
}
-static long long migrate_get_parameter_bool(QTestState *who,
- const char *parameter)
-{
- QDict *rsp;
- int result;
-
- rsp = qtest_qmp_assert_success_ref(
- who, "{ 'execute': 'query-migrate-parameters' }");
- result = qdict_get_bool(rsp, parameter);
- qobject_unref(rsp);
- return !!result;
-}
-
-static void migrate_check_parameter_bool(QTestState *who, const char *parameter,
- int value)
-{
- int result;
-
- result = migrate_get_parameter_bool(who, parameter);
- g_assert_cmpint(result, ==, value);
-}
-
-static void migrate_set_parameter_bool(QTestState *who, const char *parameter,
- int value)
-{
- qtest_qmp_assert_success(who,
- "{ 'execute': 'migrate-set-parameters',"
- "'arguments': { %s: %i } }",
- parameter, value);
- migrate_check_parameter_bool(who, parameter, value);
-}
-
static void migrate_ensure_non_converge(QTestState *who)
{
/* Can't converge with 1ms downtime + 3 mbs bandwidth limit */
@@ -1240,36 +1208,6 @@ test_migrate_tls_x509_finish(QTestState *from,
#endif /* CONFIG_TASN1 */
#endif /* CONFIG_GNUTLS */
-static void *
-test_migrate_compress_start(QTestState *from,
- QTestState *to)
-{
- migrate_set_parameter_int(from, "compress-level", 1);
- migrate_set_parameter_int(from, "compress-threads", 4);
- migrate_set_parameter_bool(from, "compress-wait-thread", true);
- migrate_set_parameter_int(to, "decompress-threads", 4);
-
- migrate_set_capability(from, "compress", true);
- migrate_set_capability(to, "compress", true);
-
- return NULL;
-}
-
-static void *
-test_migrate_compress_nowait_start(QTestState *from,
- QTestState *to)
-{
- migrate_set_parameter_int(from, "compress-level", 9);
- migrate_set_parameter_int(from, "compress-threads", 1);
- migrate_set_parameter_bool(from, "compress-wait-thread", false);
- migrate_set_parameter_int(to, "decompress-threads", 1);
-
- migrate_set_capability(from, "compress", true);
- migrate_set_capability(to, "compress", true);
-
- return NULL;
-}
-
static int migrate_postcopy_prepare(QTestState **from_ptr,
QTestState **to_ptr,
MigrateCommon *args)
@@ -1370,15 +1308,6 @@ static void test_postcopy_suspend(void)
test_postcopy_common(&args);
}
-static void test_postcopy_compress(void)
-{
- MigrateCommon args = {
- .start_hook = test_migrate_compress_start
- };
-
- test_postcopy_common(&args);
-}
-
static void test_postcopy_preempt(void)
{
MigrateCommon args = {
@@ -1561,15 +1490,6 @@ static void test_postcopy_recovery(void)
test_postcopy_recovery_common(&args);
}
-static void test_postcopy_recovery_compress(void)
-{
- MigrateCommon args = {
- .start_hook = test_migrate_compress_start
- };
-
- test_postcopy_recovery_common(&args);
-}
-
#ifndef _WIN32
static void test_postcopy_recovery_double_fail(void)
{
@@ -2027,48 +1947,6 @@ static void test_precopy_unix_xbzrle(void)
test_precopy_common(&args);
}
-static void test_precopy_unix_compress(void)
-{
- g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
- MigrateCommon args = {
- .connect_uri = uri,
- .listen_uri = uri,
- .start_hook = test_migrate_compress_start,
- /*
- * Test that no invalid thread state is left over from
- * the previous iteration.
- */
- .iterations = 2,
- /*
- * We make sure the compressor can always work well even if guest
- * memory is changing. See commit 34ab9e9743 where we used to fix
- * a bug when only trigger-able with guest memory changing.
- */
- .live = true,
- };
-
- test_precopy_common(&args);
-}
-
-static void test_precopy_unix_compress_nowait(void)
-{
- g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
- MigrateCommon args = {
- .connect_uri = uri,
- .listen_uri = uri,
- .start_hook = test_migrate_compress_nowait_start,
- /*
- * Test that no invalid thread state is left over from
- * the previous iteration.
- */
- .iterations = 2,
- /* Same reason for the wait version of precopy compress test */
- .live = true,
- };
-
- test_precopy_common(&args);
-}
-
static void test_precopy_file(void)
{
g_autofree char *uri = g_strdup_printf("file:%s/%s", tmpfs,
@@ -3597,12 +3475,6 @@ int main(int argc, char **argv)
test_postcopy_preempt);
migration_test_add("/migration/postcopy/preempt/recovery/plain",
test_postcopy_preempt_recovery);
- if (getenv("QEMU_TEST_FLAKY_TESTS")) {
- migration_test_add("/migration/postcopy/compress/plain",
- test_postcopy_compress);
- migration_test_add("/migration/postcopy/recovery/compress/plain",
- test_postcopy_recovery_compress);
- }
#ifndef _WIN32
migration_test_add("/migration/postcopy/recovery/double-failures",
test_postcopy_recovery_double_fail);
@@ -3623,17 +3495,6 @@ int main(int argc, char **argv)
test_precopy_unix_plain);
migration_test_add("/migration/precopy/unix/xbzrle",
test_precopy_unix_xbzrle);
- /*
- * Compression fails from time to time.
- * Put test here but don't enable it until everything is fixed.
- */
- if (getenv("QEMU_TEST_FLAKY_TESTS")) {
- migration_test_add("/migration/precopy/unix/compress/wait",
- test_precopy_unix_compress);
- migration_test_add("/migration/precopy/unix/compress/nowait",
- test_precopy_unix_compress_nowait);
- }
-
migration_test_add("/migration/precopy/file",
test_precopy_file);
migration_test_add("/migration/precopy/file/offset",
--
2.35.3
_______________________________________________
Devel mailing list -- devel@xxxxxxxxxxxxxxxxx
To unsubscribe send an email to devel-leave@xxxxxxxxxxxxxxxxx
