Basically all files in the repository are already passing the
check, except for syntax-check.mk itself. Fix that, and stop
limiting the files on which the test is performed.
These changes have been generated by running
$ sed -Ei 's/[ '$'\t'']+\\$/ \\/g' $(git grep -El '[ '$'\t'']+\\$')
Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx>
---
build-aux/syntax-check.mk | 416 +++++++++++++++++++-------------------
ci/Makefile | 2 +-
2 files changed, 207 insertions(+), 211 deletions(-)
diff --git a/build-aux/syntax-check.mk b/build-aux/syntax-check.mk
index b770e89efa..0b832706ba 100644
--- a/build-aux/syntax-check.mk
+++ b/build-aux/syntax-check.mk
@@ -863,7 +863,6 @@ sc_prohibit_author:
# or tabs (at least one of them) right before the trailing backslash
sc_prohibit_backslash_alignment:
@prohibit='( | )\\$$' \
- in_vc_files='*\.([chx]|am|mk)$$' \
halt='Do not attempt to right-align backslashes' \
$(_sc_search_regexp)
@@ -900,28 +899,28 @@ sc_prohibit_dirent_d_type:
$(_sc_search_regexp)
sc_cast_of_argument_to_free:
- @prohibit='\<free *\( *\(' halt="don't cast free argument" \
+ @prohibit='\<free *\( *\(' halt="don't cast free argument" \
$(_sc_search_regexp)
sc_cast_of_x_alloc_return_value:
- @prohibit='\*\) *x(m|c|re)alloc\>' \
- halt="don't cast x*alloc return value" \
+ @prohibit='\*\) *x(m|c|re)alloc\>' \
+ halt="don't cast x*alloc return value" \
$(_sc_search_regexp)
# Use STREQ rather than comparing strcmp == 0, or != 0.
sp_ = strcmp *\(.+\)
sc_prohibit_strcmp:
- @prohibit='! *strcmp *\(|\<$(sp_) *[!=]=|[!=]= *$(sp_)' \
- exclude='# *define STRN?EQ\(' \
- halt='replace strcmp calls above with STREQ/STRNEQ' \
+ @prohibit='! *strcmp *\(|\<$(sp_) *[!=]=|[!=]= *$(sp_)' \
+ exclude='# *define STRN?EQ\(' \
+ halt='replace strcmp calls above with STREQ/STRNEQ' \
$(_sc_search_regexp)
# Really. You don't want to use this function.
# It may fail to NUL-terminate the destination,
# and always NUL-pads out to the specified length.
sc_prohibit_strncpy:
- @prohibit='\<strncpy *\(' \
- halt='do not use strncpy, period' \
+ @prohibit='\<strncpy *\(' \
+ halt='do not use strncpy, period' \
$(_sc_search_regexp)
# Pass EXIT_*, not number, to usage, exit, and error (when exiting)
@@ -935,34 +934,34 @@ sc_prohibit_strncpy:
# | xargs --no-run-if-empty \
# perl -pi -e 's/(^|[^.])\b(exit ?)\(0\)/$1$2(EXIT_SUCCESS)/'
sc_prohibit_magic_number_exit:
- @prohibit='(^|[^.])\<(usage|exit|error) ?\(-?[0-9]+[,)]' \
- exclude='exit \(77\)|error ?\(((0|77),|[^,]*)' \
- halt='use EXIT_* values rather than magic number' \
+ @prohibit='(^|[^.])\<(usage|exit|error) ?\(-?[0-9]+[,)]' \
+ exclude='exit \(77\)|error ?\(((0|77),|[^,]*)' \
+ halt='use EXIT_* values rather than magic number' \
$(_sc_search_regexp)
# "FATAL:" should be fully upper-cased in error messages
# "WARNING:" should be fully upper-cased, or fully lower-cased
sc_error_message_warn_fatal:
- @$(VC_LIST_EXCEPT) \
- | xargs $(GREP) -nEA2 '[^rp]error *\(' /dev/null \
- | $(GREP) -E '"Warning|"Fatal|"fatal' \
- && { echo 'use FATAL, WARNING or warning' 1>&2; \
- exit 1; } \
+ @$(VC_LIST_EXCEPT) \
+ | xargs $(GREP) -nEA2 '[^rp]error *\(' /dev/null \
+ | $(GREP) -E '"Warning|"Fatal|"fatal' \
+ && { echo 'use FATAL, WARNING or warning' 1>&2; \
+ exit 1; } \
|| :
# Error messages should not end with a period
sc_error_message_period:
- @$(VC_LIST_EXCEPT) \
- | xargs $(GREP) -nEA2 '[^rp]error *\(' /dev/null \
- | $(GREP) -E '[^."]\."' \
- && { echo 'found error message ending in period' 1>&2; \
- exit 1; } \
+ @$(VC_LIST_EXCEPT) \
+ | xargs $(GREP) -nEA2 '[^rp]error *\(' /dev/null \
+ | $(GREP) -E '[^."]\."' \
+ && { echo 'found error message ending in period' 1>&2; \
+ exit 1; } \
|| :
# Don't use cpp tests of this symbol. All code assumes config.h is included.
sc_prohibit_have_config_h:
- @prohibit='^# *if.*HAVE''_CONFIG_H' \
- halt='found use of HAVE''_CONFIG_H; remove' \
+ @prohibit='^# *if.*HAVE''_CONFIG_H' \
+ halt='found use of HAVE''_CONFIG_H; remove' \
$(_sc_search_regexp)
# Nearly all .c files must include <config.h>. However, we also permit this
@@ -970,49 +969,49 @@ sc_prohibit_have_config_h:
# config_h_header must be suitable for grep -E.
config_h_header ?= <config\.h>
sc_require_config_h:
- @require='^# *include $(config_h_header)' \
- in_vc_files='\.c$$' \
- halt='the above files do not include <config.h>' \
+ @require='^# *include $(config_h_header)' \
+ in_vc_files='\.c$$' \
+ halt='the above files do not include <config.h>' \
$(_sc_search_regexp)
# Print each file name for which the first #include does not match
# $(config_h_header). Like grep -m 1, this only looks at the first match.
-perl_config_h_first_ = \
- -e 'BEGIN {$$ret = 0}' \
- -e 'if (/^\# *include\b/) {' \
- -e ' if (not m{^\# *include $(config_h_header)}) {' \
- -e ' print "$$ARGV\n";' \
- -e ' $$ret = 1;' \
- -e ' }' \
- -e ' \# Move on to next file after first include' \
- -e ' close ARGV;' \
- -e '}' \
+perl_config_h_first_ = \
+ -e 'BEGIN {$$ret = 0}' \
+ -e 'if (/^\# *include\b/) {' \
+ -e ' if (not m{^\# *include $(config_h_header)}) {' \
+ -e ' print "$$ARGV\n";' \
+ -e ' $$ret = 1;' \
+ -e ' }' \
+ -e ' \# Move on to next file after first include' \
+ -e ' close ARGV;' \
+ -e '}' \
-e 'END {exit $$ret}'
# You must include <config.h> before including any other header file.
# This can possibly be via a package-specific header, if given by syntax-check.mk.
sc_require_config_h_first:
- @if $(VC_LIST_EXCEPT) | $(GREP) '\.c$$' > /dev/null; then \
- files=$$($(VC_LIST_EXCEPT) | $(GREP) '\.c$$') && \
- perl -n $(perl_config_h_first_) $$files || \
- { echo 'the above files include some other header' \
- 'before <config.h>' 1>&2; exit 1; } || :; \
- else :; \
+ @if $(VC_LIST_EXCEPT) | $(GREP) '\.c$$' > /dev/null; then \
+ files=$$($(VC_LIST_EXCEPT) | $(GREP) '\.c$$') && \
+ perl -n $(perl_config_h_first_) $$files || \
+ { echo 'the above files include some other header' \
+ 'before <config.h>' 1>&2; exit 1; } || :; \
+ else :; \
fi
# To use this "command" macro, you must first define two shell variables:
# h: the header name, with no enclosing <> or ""
# re: a regular expression that matches IFF something provided by $h is used.
define _sc_header_without_use
- dummy=; : so we do not need a semicolon before each use; \
- h_esc=`echo '[<"]'"$$h"'[">]'|$(SED) 's/\./\\\\./g'`; \
- if $(VC_LIST_EXCEPT) | $(GREP) '\.c$$' > /dev/null; then \
- files=$$($(GREP) -l '^# *include '"$$h_esc" \
- $$($(VC_LIST_EXCEPT) | $(GREP) '\.c$$')) && \
- $(GREP) -LE "$$re" $$files | $(GREP) . && \
- { echo "the above files include $$h but don't use it" \
- 1>&2; exit 1; } || :; \
- else :; \
+ dummy=; : so we do not need a semicolon before each use; \
+ h_esc=`echo '[<"]'"$$h"'[">]'|$(SED) 's/\./\\\\./g'`; \
+ if $(VC_LIST_EXCEPT) | $(GREP) '\.c$$' > /dev/null; then \
+ files=$$($(GREP) -l '^# *include '"$$h_esc" \
+ $$($(VC_LIST_EXCEPT) | $(GREP) '\.c$$')) && \
+ $(GREP) -LE "$$re" $$files | $(GREP) . && \
+ { echo "the above files include $$h but don't use it" \
+ 1>&2; exit 1; } || :; \
+ else :; \
fi
endef
@@ -1034,41 +1033,41 @@ _sig_functions = \
sigrelse sigset sigsuspend sigtimedwait sigwait sigwaitinfo
_sig_function_re = $(subst $(_sp),|,$(strip $(_sig_functions)))
# The following were extracted from "man signal.h" manually.
-_sig_types_and_consts = \
- MINSIGSTKSZ SA_NOCLDSTOP SA_NOCLDWAIT SA_NODEFER SA_ONSTACK \
- SA_RESETHAND SA_RESTART SA_SIGINFO SIGEV_NONE SIGEV_SIGNAL \
- SIGEV_THREAD SIGSTKSZ SIG_BLOCK SIG_SETMASK SIG_UNBLOCK SS_DISABLE \
- SS_ONSTACK mcontext_t pid_t sig_atomic_t sigevent siginfo_t sigset_t \
+_sig_types_and_consts = \
+ MINSIGSTKSZ SA_NOCLDSTOP SA_NOCLDWAIT SA_NODEFER SA_ONSTACK \
+ SA_RESETHAND SA_RESTART SA_SIGINFO SIGEV_NONE SIGEV_SIGNAL \
+ SIGEV_THREAD SIGSTKSZ SIG_BLOCK SIG_SETMASK SIG_UNBLOCK SS_DISABLE \
+ SS_ONSTACK mcontext_t pid_t sig_atomic_t sigevent siginfo_t sigset_t \
sigstack sigval stack_t ucontext_t
# generated via this:
# perl -lne '/^#ifdef (SIG\w+)/ and print $1' lib/sig2str.c|sort -u|fmt -70
-_sig_names = \
- SIGABRT SIGALRM SIGALRM1 SIGBUS SIGCANCEL SIGCHLD SIGCLD SIGCONT \
- SIGDANGER SIGDIL SIGEMT SIGFPE SIGFREEZE SIGGRANT SIGHUP SIGILL \
- SIGINFO SIGINT SIGIO SIGIOT SIGKAP SIGKILL SIGKILLTHR SIGLOST SIGLWP \
- SIGMIGRATE SIGMSG SIGPHONE SIGPIPE SIGPOLL SIGPRE SIGPROF SIGPWR \
- SIGQUIT SIGRETRACT SIGSAK SIGSEGV SIGSOUND SIGSTKFLT SIGSTOP SIGSYS \
- SIGTERM SIGTHAW SIGTRAP SIGTSTP SIGTTIN SIGTTOU SIGURG SIGUSR1 \
- SIGUSR2 SIGVIRT SIGVTALRM SIGWAITING SIGWINCH SIGWIND SIGWINDOW \
+_sig_names = \
+ SIGABRT SIGALRM SIGALRM1 SIGBUS SIGCANCEL SIGCHLD SIGCLD SIGCONT \
+ SIGDANGER SIGDIL SIGEMT SIGFPE SIGFREEZE SIGGRANT SIGHUP SIGILL \
+ SIGINFO SIGINT SIGIO SIGIOT SIGKAP SIGKILL SIGKILLTHR SIGLOST SIGLWP \
+ SIGMIGRATE SIGMSG SIGPHONE SIGPIPE SIGPOLL SIGPRE SIGPROF SIGPWR \
+ SIGQUIT SIGRETRACT SIGSAK SIGSEGV SIGSOUND SIGSTKFLT SIGSTOP SIGSYS \
+ SIGTERM SIGTHAW SIGTRAP SIGTSTP SIGTTIN SIGTTOU SIGURG SIGUSR1 \
+ SIGUSR2 SIGVIRT SIGVTALRM SIGWAITING SIGWINCH SIGWIND SIGWINDOW \
SIGXCPU SIGXFSZ
_sig_syms_re = $(subst $(_sp),|,$(strip $(_sig_names) $(_sig_types_and_consts)))
# Prohibit the inclusion of signal.h without an actual use.
sc_prohibit_signal_without_use:
- @h='signal.h' \
- re='\<($(_sig_function_re)) *\(|\<($(_sig_syms_re))\>' \
+ @h='signal.h' \
+ re='\<($(_sig_function_re)) *\(|\<($(_sig_syms_re))\>' \
$(_sc_header_without_use)
# Don't include stdio--.h unless you use one of its functions.
sc_prohibit_stdio--_without_use:
- @h='stdio--.h' re='\<((f(re)?|p)open|tmpfile) *\(' \
+ @h='stdio--.h' re='\<((f(re)?|p)open|tmpfile) *\(' \
$(_sc_header_without_use)
_stddef_syms_re = NULL|offsetof|ptrdiff_t|size_t|wchar_t
# Prohibit the inclusion of stddef.h without an actual use.
sc_prohibit_stddef_without_use:
- @h='stddef.h' \
- re='\<($(_stddef_syms_re))\>' \
+ @h='stddef.h' \
+ re='\<($(_stddef_syms_re))\>' \
$(_sc_header_without_use)
_de1 = dirfd|(close|(fd)?open|read|rewind|seek|tell)dir(64)?(_r)?
@@ -1077,14 +1076,14 @@ _de3 = MAXNAMLEN|DIR|ino_t|d_ino|d_fileno|d_namlen
_dirent_syms_re = $(_de1)|$(_de2)|$(_de3)
# Prohibit the inclusion of dirent.h without an actual use.
sc_prohibit_dirent_without_use:
- @h='dirent.h' \
- re='\<($(_dirent_syms_re))\>' \
+ @h='dirent.h' \
+ re='\<($(_dirent_syms_re))\>' \
$(_sc_header_without_use)
sc_trailing_blank:
- @prohibit='[ ]$$' \
- halt='found trailing blank(s)' \
- exclude='^Binary file .* matches$$' \
+ @prohibit='[ ]$$' \
+ halt='found trailing blank(s)' \
+ exclude='^Binary file .* matches$$' \
$(_sc_search_regexp)
@@ -1096,20 +1095,20 @@ _gl_translatable_diag_func_re ?= error
# This won't find any for which error's format string is on a separate line.
sc_unmarked_diagnostics:
@prohibit='\<$(_gl_translatable_diag_func_re) *\([^"]*"[^"]*[a-z]{3}' \
- exclude='(_|ngettext ?)\(' \
- halt='found unmarked diagnostic(s)' \
+ exclude='(_|ngettext ?)\(' \
+ halt='found unmarked diagnostic(s)' \
$(_sc_search_regexp)
sc_prohibit_defined_have_decl_tests:
- @prohibit='(#[ ]*ifn?def|\<defined)\>[ (]+WITH_DECL_' \
- halt='WITH_DECL macros are always defined' \
+ @prohibit='(#[ ]*ifn?def|\<defined)\>[ (]+WITH_DECL_' \
+ halt='WITH_DECL macros are always defined' \
$(_sc_search_regexp)
# Prohibit checked in backup files.
sc_prohibit_backup_files:
@$(VC_LIST_EXCEPT) | $(GREP) '~$$' && \
- { echo 'found version controlled backup file' 1>&2; \
+ { echo 'found version controlled backup file' 1>&2; \
exit 1; } || :
# This Perl code is slightly obfuscated. Not only is each "$" doubled
@@ -1135,36 +1134,36 @@ sc_prohibit_backup_files:
# Use this if you want to remove trailing empty lines from selected files:
# perl -pi -0777 -e 's/\n\n+$/\n/' files...
#
-require_exactly_one_NL_at_EOF_ = \
- foreach my $$f (@ARGV) \
- { \
- open F, "<", $$f or (warn "failed to open $$f: $$!\n"), next; \
- my $$p = sysseek (F, -2, 2); \
+require_exactly_one_NL_at_EOF_ = \
+ foreach my $$f (@ARGV) \
+ { \
+ open F, "<", $$f or (warn "failed to open $$f: $$!\n"), next; \
+ my $$p = sysseek (F, -2, 2); \
my $$c = "seek failure probably means file has < 2 bytes; ignore"; \
- my $$last_two_bytes; \
- defined $$p and $$p = sysread F, $$last_two_bytes, 2; \
- close F; \
- $$c = "ignore read failure"; \
- $$p && ($$last_two_bytes eq "\n\n" \
- || substr ($$last_two_bytes,1) ne "\n") \
- and (print $$f), $$fail=1; \
- } \
+ my $$last_two_bytes; \
+ defined $$p and $$p = sysread F, $$last_two_bytes, 2; \
+ close F; \
+ $$c = "ignore read failure"; \
+ $$p && ($$last_two_bytes eq "\n\n" \
+ || substr ($$last_two_bytes,1) ne "\n") \
+ and (print $$f), $$fail=1; \
+ } \
END { exit defined $$fail }
sc_prohibit_empty_lines_at_EOF:
- @$(VC_LIST_EXCEPT) \
- | xargs perl -le '$(require_exactly_one_NL_at_EOF_)' \
- || { echo 'empty line(s) or no newline at EOF' 1>&2; \
- exit 1; } \
+ @$(VC_LIST_EXCEPT) \
+ | xargs perl -le '$(require_exactly_one_NL_at_EOF_)' \
+ || { echo 'empty line(s) or no newline at EOF' 1>&2; \
+ exit 1; } \
|| :
# Perl block to convert a match to FILE_NAME:LINENO:TEST,
# that is shared by two definitions below.
-perl_filename_lineno_text_ = \
- -e ' {' \
- -e ' $$n = ($$` =~ tr/\n/\n/ + 1);' \
- -e ' ($$v = $$&) =~ s/\n/\\n/g;' \
- -e ' print "$$ARGV:$$n:$$v\n";' \
+perl_filename_lineno_text_ = \
+ -e ' {' \
+ -e ' $$n = ($$` =~ tr/\n/\n/ + 1);' \
+ -e ' ($$v = $$&) =~ s/\n/\\n/g;' \
+ -e ' print "$$ARGV:$$n:$$v\n";' \
-e ' }'
prohibit_doubled_words_ = \
@@ -1174,8 +1173,8 @@ prohibit_doubled_word_expanded_ = \
$(join $(prohibit_doubled_words_),$(addprefix \s+,$(prohibit_doubled_words_)))
prohibit_doubled_word_RE_ ?= \
/\b(?:$(subst $(_sp),|,$(prohibit_doubled_word_expanded_)))\b/gims
-prohibit_doubled_word_ = \
- -e 'while ($(prohibit_doubled_word_RE_))' \
+prohibit_doubled_word_ = \
+ -e 'while ($(prohibit_doubled_word_RE_))' \
$(perl_filename_lineno_text_)
# Define this to a regular expression that matches
@@ -1184,19 +1183,19 @@ prohibit_doubled_word_ = \
ignore_doubled_word_match_RE_ ?= ^$$
sc_prohibit_doubled_word:
- @$(VC_LIST_EXCEPT) \
- | xargs perl -n -0777 $(prohibit_doubled_word_) \
- | $(GREP) -vE '$(ignore_doubled_word_match_RE_)' \
- | $(GREP) . \
- && { echo 'doubled words' 1>&2; exit 1; } \
+ @$(VC_LIST_EXCEPT) \
+ | xargs perl -n -0777 $(prohibit_doubled_word_) \
+ | $(GREP) -vE '$(ignore_doubled_word_match_RE_)' \
+ | $(GREP) . \
+ && { echo 'doubled words' 1>&2; exit 1; } \
|| :
# Except for shell files and for loops, double semicolon is probably a mistake
sc_prohibit_double_semicolon:
- @prohibit='; *;[ {} \]*(/[/*]|$$)' \
- in_vc_files='\.[chly]$$' \
- exclude='\bfor *\(.*\)' \
- halt="Double semicolon detected" \
+ @prohibit='; *;[ {} \]*(/[/*]|$$)' \
+ in_vc_files='\.[chly]$$' \
+ exclude='\bfor *\(.*\)' \
+ halt="Double semicolon detected" \
$(_sc_search_regexp)
_ptm1 = use "test C1 && test C2", not "test C1 -''a C2"
@@ -1204,29 +1203,29 @@ _ptm2 = use "test C1 || test C2", not "test C1 -''o C2"
# Using test's -a and -o operators is not portable.
# We prefer test over [, since the latter is spelled [[ in configure.ac.
sc_prohibit_test_minus_ao:
- @prohibit='(\<test| \[+) .+ -[ao] ' \
- halt='$(_ptm1); $(_ptm2)' \
+ @prohibit='(\<test| \[+) .+ -[ao] ' \
+ halt='$(_ptm1); $(_ptm2)' \
$(_sc_search_regexp)
# Avoid a test bashism.
sc_prohibit_test_double_equal:
- @prohibit='(\<test| \[+) .+ == ' \
- containing='#! */bin/[a-z]*sh' \
- halt='use "test x = x", not "test x =''= x"' \
+ @prohibit='(\<test| \[+) .+ == ' \
+ containing='#! */bin/[a-z]*sh' \
+ halt='use "test x = x", not "test x =''= x"' \
$(_sc_search_regexp)
# Warn about "c0nst struct Foo const foo[]",
# but not about "char const *const foo" or "#define const const".
sc_redundant_const:
- @prohibit='\bconst\b[[:space:][:alnum:]]{2,}\bconst\b' \
- halt='redundant "const" in declarations' \
+ @prohibit='\bconst\b[[:space:][:alnum:]]{2,}\bconst\b' \
+ halt='redundant "const" in declarations' \
$(_sc_search_regexp)
sc_const_long_option:
- @prohibit='^ *static.*struct option ' \
- exclude='const struct option|struct option const' \
- halt='add "const" to the above declarations' \
+ @prohibit='^ *static.*struct option ' \
+ exclude='const struct option|struct option const' \
+ halt='add "const" to the above declarations' \
$(_sc_search_regexp)
fix_po_file_diag = \
@@ -1234,18 +1233,18 @@ fix_po_file_diag = \
apply the above patch\n'
# Generate a list of files in which to search for translatable strings.
-perl_translatable_files_list_ = \
- -e 'foreach $$file (@ARGV) {' \
- -e ' \# Consider only file extensions with one or two letters' \
- -e ' $$file =~ /\...?$$/ or next;' \
- -e ' \# Ignore mk files' \
- -e ' $$file =~ /\.mk$$/ and next;' \
- -e ' \# Ignore a .c or .h file with a corresponding .l or .y file' \
- -e ' $$file =~ /(.+)\.[ch]$$/ && (-e "$${1}.l" || -e "$${1}.y")' \
- -e ' and next;' \
- -e ' \# Skip unreadable files' \
- -e ' -r $$file or next;' \
- -e ' print "$$file ";' \
+perl_translatable_files_list_ = \
+ -e 'foreach $$file (@ARGV) {' \
+ -e ' \# Consider only file extensions with one or two letters' \
+ -e ' $$file =~ /\...?$$/ or next;' \
+ -e ' \# Ignore mk files' \
+ -e ' $$file =~ /\.mk$$/ and next;' \
+ -e ' \# Ignore a .c or .h file with a corresponding .l or .y file' \
+ -e ' $$file =~ /(.+)\.[ch]$$/ && (-e "$${1}.l" || -e "$${1}.y")' \
+ -e ' and next;' \
+ -e ' \# Skip unreadable files' \
+ -e ' -r $$file or next;' \
+ -e ' print "$$file ";' \
-e '}'
# Verify that all source files using _() (more specifically, files that
@@ -1262,17 +1261,17 @@ _gl_translatable_string_re ?= \b(N?_|gettext *)\([^)"]*("|$$)
# sc_po_check can fail if generated files are not built first
sc_po_check:
- @if test -f $(po_file); then \
+ @if test -f $(po_file); then \
$(GREP) -E -v '^(#|$$)' $(po_file) | sort > $@-1; \
- { $(VC_LIST_EXCEPT); echo $(generated_files); } \
- | xargs perl $(perl_translatable_files_list_) \
- | xargs $(GREP) -E -l '$(_gl_translatable_string_re)' \
+ { $(VC_LIST_EXCEPT); echo $(generated_files); } \
+ | xargs perl $(perl_translatable_files_list_) \
+ | xargs $(GREP) -E -l '$(_gl_translatable_string_re)' \
| $(SED) 's|^$(_dot_escaped_builddir)/||' \
| $(SED) 's|^$(_dot_escaped_srcdir)/||' \
- | sort -u > $@-2; \
- diff -u -L $(po_file) -L $(po_file) $@-1 $@-2 \
- || { printf $(fix_po_file_diag) 1>&2; exit 1; }; \
- rm -f $@-1 $@-2; \
+ | sort -u > $@-2; \
+ diff -u -L $(po_file) -L $(po_file) $@-1 $@-2 \
+ || { printf $(fix_po_file_diag) 1>&2; exit 1; }; \
+ rm -f $@-1 $@-2; \
fi
linguas_file = $(top_srcdir)/po/LINGUAS
@@ -1288,17 +1287,17 @@ sc_linguas_sorting:
# tests many undefined macros, and so we can't enable that option.
# So at least preclude common boolean strings as macro values.
sc_Wundef_boolean:
- @prohibit='^#define.*(yes|no|true|false)$$' \
- in_files='$(CONFIG_INCLUDE)' \
- halt='Use 0 or 1 for macro values' \
+ @prohibit='^#define.*(yes|no|true|false)$$' \
+ in_files='$(CONFIG_INCLUDE)' \
+ halt='Use 0 or 1 for macro values' \
$(_sc_search_regexp)
# Even if you use pathmax.h to guarantee that PATH_MAX is defined, it might
# not be constant, or might overflow a stack. In general, use PATH_MAX as
# a limit, not an array or alloca size.
sc_prohibit_path_max_allocation:
- @prohibit='(\balloca *\([^)]*|\[[^]]*)\bPATH_MAX' \
- halt='Avoid stack allocations of size PATH_MAX' \
+ @prohibit='(\balloca *\([^)]*|\[[^]]*)\bPATH_MAX' \
+ halt='Avoid stack allocations of size PATH_MAX' \
$(_sc_search_regexp)
ifneq ($(_gl-Makefile),)
@@ -1340,9 +1339,9 @@ sc_group-qemu-caps:
--check --prefix $(top_srcdir)/
sc_prohibit_enum_impl_with_vir_prefix_in_virsh:
- @prohibit='VIR_ENUM_(IMPL|DECL)\(vir[^s]' \
- in_vc_files='tools/virsh.*\.[ch]$$' \
- halt='avoid "vir" prefix for enums in virsh' \
+ @prohibit='VIR_ENUM_(IMPL|DECL)\(vir[^s]' \
+ in_vc_files='tools/virsh.*\.[ch]$$' \
+ halt='avoid "vir" prefix for enums in virsh' \
$(_sc_search_regexp)
@@ -1487,9 +1486,6 @@ exclude_file_name_regexp--sc_prohibit_dirent_d_type = \
exclude_file_name_regexp--sc_prohibit_strcmp = \
^(tools/nss/libvirt_nss.*\.c|tools/virt-login-shell\.c)
-exclude_file_name_regexp--sc_prohibit_backslash_alignment = \
- ^build-aux/syntax-check\.mk$$
-
exclude_file_name_regexp--sc_prohibit_select = \
^build-aux/syntax-check\.mk|src/util/vireventglibwatch\.c|tests/meson\.build$$
@@ -1603,67 +1599,67 @@ export ignore_case =
_ignore_case = $$(test -n "$$ignore_case" && printf %s -i || :)
define _sc_say_and_exit
- dummy=; : so we do not need a semicolon before each use; \
+ dummy=; : so we do not need a semicolon before each use; \
{ printf '%s\n' "$$msg" 1>&2; exit 1; };
endef
define _sc_search_regexp
- dummy=; : so we do not need a semicolon before each use; \
- \
- : Check arguments; \
- test -n "$$prohibit" && test -n "$$require" \
- && { msg='Cannot specify both prohibit and require' \
- $(_sc_say_and_exit) } || :; \
- test -z "$$prohibit" && test -z "$$require" \
- && { msg='Should specify either prohibit or require' \
- $(_sc_say_and_exit) } || :; \
- test -z "$$prohibit" && test -n "$$exclude" \
- && { msg='Use of exclude requires a prohibit pattern' \
- $(_sc_say_and_exit) } || :; \
- test -n "$$in_vc_files" && test -n "$$in_files" \
- && { msg='Cannot specify both in_vc_files and in_files' \
- $(_sc_say_and_exit) } || :; \
- test "x$$halt" != x \
- || { msg='halt not defined' $(_sc_say_and_exit) }; \
- \
- : Filter by file name; \
- if test -n "$$in_files"; then \
- files=$$(find $(top_srcdir) | $(GREP) -E "$$in_files" \
- | $(GREP) -Ev '$(_sc_excl)'); \
- else \
- files=$$($(VC_LIST_EXCEPT)); \
- if test -n "$$in_vc_files"; then \
- files=$$(echo "$$files" | $(GREP) -E "$$in_vc_files"); \
- fi; \
- fi; \
- \
- : Filter by content; \
- test -n "$$files" \
- && test -n "$$containing" \
- && { files=$$(echo "$$files" | xargs $(GREP) -l "$$containing"); } \
- || :; \
- test -n "$$files" \
- && test -n "$$non_containing" \
+ dummy=; : so we do not need a semicolon before each use; \
+ \
+ : Check arguments; \
+ test -n "$$prohibit" && test -n "$$require" \
+ && { msg='Cannot specify both prohibit and require' \
+ $(_sc_say_and_exit) } || :; \
+ test -z "$$prohibit" && test -z "$$require" \
+ && { msg='Should specify either prohibit or require' \
+ $(_sc_say_and_exit) } || :; \
+ test -z "$$prohibit" && test -n "$$exclude" \
+ && { msg='Use of exclude requires a prohibit pattern' \
+ $(_sc_say_and_exit) } || :; \
+ test -n "$$in_vc_files" && test -n "$$in_files" \
+ && { msg='Cannot specify both in_vc_files and in_files' \
+ $(_sc_say_and_exit) } || :; \
+ test "x$$halt" != x \
+ || { msg='halt not defined' $(_sc_say_and_exit) }; \
+ \
+ : Filter by file name; \
+ if test -n "$$in_files"; then \
+ files=$$(find $(top_srcdir) | $(GREP) -E "$$in_files" \
+ | $(GREP) -Ev '$(_sc_excl)'); \
+ else \
+ files=$$($(VC_LIST_EXCEPT)); \
+ if test -n "$$in_vc_files"; then \
+ files=$$(echo "$$files" | $(GREP) -E "$$in_vc_files"); \
+ fi; \
+ fi; \
+ \
+ : Filter by content; \
+ test -n "$$files" \
+ && test -n "$$containing" \
+ && { files=$$(echo "$$files" | xargs $(GREP) -l "$$containing"); } \
+ || :; \
+ test -n "$$files" \
+ && test -n "$$non_containing" \
&& { files=$$(echo "$$files" | xargs $(GREP) -vl "$$non_containing"); } \
- || :; \
- \
- : Check for the construct; \
- if test -n "$$files"; then \
- if test -n "$$prohibit"; then \
- echo "$$files" \
- | xargs $(GREP) $$with_grep_options $(_ignore_case) -nE \
- "$$prohibit" /dev/null \
- | $(GREP) -vE "$${exclude:-^$$}" \
- && { msg="$$halt" $(_sc_say_and_exit) } \
- || :; \
- else \
- echo "$$files" \
- | xargs \
+ || :; \
+ \
+ : Check for the construct; \
+ if test -n "$$files"; then \
+ if test -n "$$prohibit"; then \
+ echo "$$files" \
+ | xargs $(GREP) $$with_grep_options $(_ignore_case) -nE \
+ "$$prohibit" /dev/null \
+ | $(GREP) -vE "$${exclude:-^$$}" \
+ && { msg="$$halt" $(_sc_say_and_exit) } \
+ || :; \
+ else \
+ echo "$$files" \
+ | xargs \
$(GREP) $$with_grep_options $(_ignore_case) -LE "$$require" \
- | $(GREP) . \
- && { msg="$$halt" $(_sc_say_and_exit) } \
- || :; \
- fi \
- else :; \
+ | $(GREP) . \
+ && { msg="$$halt" $(_sc_say_and_exit) } \
+ || :; \
+ fi \
+ else :; \
fi || :;
endef
diff --git a/ci/Makefile b/ci/Makefile
index 02ce0df7ee..81f08d4f88 100644
--- a/ci/Makefile
+++ b/ci/Makefile
@@ -140,7 +140,7 @@ endif
CI_GIT_ARGS = \
-c advice.detachedHead=false \
-q \
- --local \
+ --local \
$(NULL)
# Args to use when running the container
--
2.35.3
