[libvirt PATCH 14/80] qemu: Keep migration job active after failed post-copy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When post-copy migration fails, we can't just abort the migration and
resume the domain on the source host as it is already running on the
destination host and no host has a complete state of the domain memory.
Instead of the current approach of just marking the domain on both ends
as paused/running with a post-copy failed sub state, we will keep the
migration job active (even though the migration API will return failure)
so that the state is more visible and we can better control what APIs
can be called on the domains and even allow for resuming the migration.

Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx>
---
 src/qemu/qemu_migration.c | 94 ++++++++++++++++++++++++++++-----------
 1 file changed, 68 insertions(+), 26 deletions(-)

diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
index 19337878e4..532a9300b6 100644
--- a/src/qemu/qemu_migration.c
+++ b/src/qemu/qemu_migration.c
@@ -2249,10 +2249,17 @@ qemuMigrationSrcCleanup(virDomainObj *vm,
         VIR_WARN("Migration of domain %s finished but we don't know if the"
                  " domain was successfully started on destination or not",
                  vm->def->name);
-        qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_OUT,
-                                 jobPriv->migParams, priv->job.apiFlags);
-        /* clear the job and let higher levels decide what to do */
-        qemuMigrationJobFinish(vm);
+
+        if (virDomainObjIsPostcopy(vm, VIR_DOMAIN_JOB_OPERATION_MIGRATION_OUT)) {
+            qemuMigrationSrcPostcopyFailed(vm);
+            qemuDomainCleanupAdd(vm, qemuProcessCleanupMigrationJob);
+            qemuMigrationJobContinue(vm);
+        } else {
+            qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_OUT,
+                                     jobPriv->migParams, priv->job.apiFlags);
+            /* clear the job and let higher levels decide what to do */
+            qemuMigrationJobFinish(vm);
+        }
         break;
 
     case QEMU_MIGRATION_PHASE_PERFORM3:
@@ -3427,6 +3434,7 @@ qemuMigrationSrcConfirmPhase(virQEMUDriver *driver,
     qemuDomainObjPrivate *priv = vm->privateData;
     qemuDomainJobPrivate *jobPriv = priv->job.privateData;
     virDomainJobData *jobData = NULL;
+    qemuMigrationJobPhase phase;
 
     VIR_DEBUG("driver=%p, vm=%p, cookiein=%s, cookieinlen=%d, "
               "flags=0x%x, retcode=%d",
@@ -3435,10 +3443,17 @@ qemuMigrationSrcConfirmPhase(virQEMUDriver *driver,
 
     virCheckFlags(QEMU_MIGRATION_FLAGS, -1);
 
-    qemuMigrationJobSetPhase(vm,
-                             retcode == 0
-                             ? QEMU_MIGRATION_PHASE_CONFIRM3
-                             : QEMU_MIGRATION_PHASE_CONFIRM3_CANCELLED);
+    /* Keep the original migration phase in case post-copy failed as the job
+     * will stay active even though migration API finishes with an error.
+     */
+    if (virDomainObjIsFailedPostcopy(vm))
+        phase = priv->job.phase;
+    else if (retcode == 0)
+        phase = QEMU_MIGRATION_PHASE_CONFIRM3;
+    else
+        phase = QEMU_MIGRATION_PHASE_CONFIRM3_CANCELLED;
+
+    qemuMigrationJobSetPhase(vm, phase);
 
     if (!(mig = qemuMigrationCookieParse(driver, vm->def, priv->origname, priv,
                                          cookiein, cookieinlen,
@@ -3507,13 +3522,14 @@ qemuMigrationSrcConfirmPhase(virQEMUDriver *driver,
         virErrorRestore(&orig_err);
 
         if (virDomainObjGetState(vm, &reason) == VIR_DOMAIN_PAUSED &&
-            reason == VIR_DOMAIN_PAUSED_POSTCOPY)
+            reason == VIR_DOMAIN_PAUSED_POSTCOPY) {
             qemuMigrationSrcPostcopyFailed(vm);
-        else
+        } else if (!virDomainObjIsFailedPostcopy(vm)) {
             qemuMigrationSrcRestoreDomainState(driver, vm);
 
-        qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_OUT,
-                                 jobPriv->migParams, priv->job.apiFlags);
+            qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_OUT,
+                                     jobPriv->migParams, priv->job.apiFlags);
+        }
 
         qemuDomainSaveStatus(vm);
     }
@@ -3531,12 +3547,18 @@ qemuMigrationSrcConfirm(virQEMUDriver *driver,
 {
     qemuMigrationJobPhase phase;
     g_autoptr(virQEMUDriverConfig) cfg = virQEMUDriverGetConfig(driver);
+    qemuDomainObjPrivate *priv = vm->privateData;
     int ret = -1;
 
     if (!qemuMigrationJobIsActive(vm, VIR_ASYNC_JOB_MIGRATION_OUT))
         goto cleanup;
 
-    if (cancelled)
+    /* Keep the original migration phase in case post-copy failed as the job
+     * will stay active even though migration API finishes with an error.
+     */
+    if (virDomainObjIsFailedPostcopy(vm))
+        phase = priv->job.phase;
+    else if (cancelled)
         phase = QEMU_MIGRATION_PHASE_CONFIRM3_CANCELLED;
     else
         phase = QEMU_MIGRATION_PHASE_CONFIRM3;
@@ -3549,7 +3571,13 @@ qemuMigrationSrcConfirm(virQEMUDriver *driver,
                                        cookiein, cookieinlen,
                                        flags, cancelled);
 
-    qemuMigrationJobFinish(vm);
+    if (virDomainObjIsFailedPostcopy(vm)) {
+        qemuDomainCleanupAdd(vm, qemuProcessCleanupMigrationJob);
+        qemuMigrationJobContinue(vm);
+    } else {
+        qemuMigrationJobFinish(vm);
+    }
+
     if (!virDomainObjIsActive(vm)) {
         if (!cancelled && ret == 0 && flags & VIR_MIGRATE_UNDEFINE_SOURCE) {
             virDomainDeleteConfig(cfg->configDir, cfg->autostartDir, vm);
@@ -5365,16 +5393,22 @@ qemuMigrationSrcPerformJob(virQEMUDriver *driver,
     if (ret < 0)
         virErrorPreserveLast(&orig_err);
 
-    /* v2 proto has no confirm phase so we need to reset migration parameters
-     * here
-     */
-    if (!v3proto && ret < 0)
-        qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_OUT,
-                                 jobPriv->migParams, priv->job.apiFlags);
+    if (virDomainObjIsFailedPostcopy(vm)) {
+        qemuDomainCleanupAdd(vm, qemuProcessCleanupMigrationJob);
+        qemuMigrationJobContinue(vm);
+    } else {
+        /* v2 proto has no confirm phase so we need to reset migration parameters
+         * here
+         */
+        if (!v3proto && ret < 0)
+            qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_OUT,
+                                     jobPriv->migParams, priv->job.apiFlags);
 
-    qemuMigrationSrcRestoreDomainState(driver, vm);
+        qemuMigrationSrcRestoreDomainState(driver, vm);
+
+        qemuMigrationJobFinish(vm);
+    }
 
-    qemuMigrationJobFinish(vm);
     if (!virDomainObjIsActive(vm) && ret == 0) {
         if (flags & VIR_MIGRATE_UNDEFINE_SOURCE) {
             virDomainDeleteConfig(cfg->configDir, cfg->autostartDir, vm);
@@ -5445,11 +5479,12 @@ qemuMigrationSrcPerformPhase(virQEMUDriver *driver,
         goto endjob;
 
  endjob:
-    if (ret < 0) {
+    if (ret < 0 && !virDomainObjIsFailedPostcopy(vm)) {
         qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_OUT,
                                  jobPriv->migParams, priv->job.apiFlags);
         qemuMigrationJobFinish(vm);
     } else {
+        qemuDomainCleanupAdd(vm, qemuProcessCleanupMigrationJob);
         qemuMigrationJobContinue(vm);
     }
 
@@ -5910,10 +5945,17 @@ qemuMigrationDstFinish(virQEMUDriver *driver,
             g_clear_pointer(&priv->job.completed, virDomainJobDataFree);
     }
 
-    qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_IN,
-                             jobPriv->migParams, priv->job.apiFlags);
+    if (virDomainObjIsFailedPostcopy(vm)) {
+        qemuProcessAutoDestroyRemove(driver, vm);
+        qemuDomainCleanupAdd(vm, qemuProcessCleanupMigrationJob);
+        qemuMigrationJobContinue(vm);
+    } else {
+        qemuMigrationParamsReset(driver, vm, VIR_ASYNC_JOB_MIGRATION_IN,
+                                 jobPriv->migParams, priv->job.apiFlags);
+
+        qemuMigrationJobFinish(vm);
+    }
 
-    qemuMigrationJobFinish(vm);
     if (!virDomainObjIsActive(vm))
         qemuDomainRemoveInactive(driver, vm);
 
-- 
2.35.1




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux