[PATCH RESEND 0/4] re-introduce <acpi-hotplug-bridge>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am re-introducing the patchset for <acpi-hotplug-bridge> which got
reverted here few months back:

https://www.spinics.net/linux/fedora/libvir/msg224089.html

The reason for the reversal was that there seemed to be some
instability/issues around the use of the qemu commandline which this
patchset tries to support. In particular, some guest operating systems
did not like the way QEMU was trying to disable native hotplug on pcie
root ports. Subsequently, in QEMU 6.2, we have changed our mechanism
using which we disable native hotplug. As I understand, we do not have
any reported issues so far in 6.2 around this area. QEMU will enter a
soft feature freeze in the first week of march in prep for 7.0 release.
Libvirt is also entering a new release cycle phaze. Hence, I am
introducing this patchset early enough in the release cycles so that if
we do see any issues on the qemu side during the rc0, rc1 cycles and if
reversal of this patchset is again required, it can be done in time
before the next libvirt release end of March.

All the patches in this series had been previously reviewed. Some
subsequent fixes were made after my initial patches were pushed. I have
squashed all those fixes and consolidated them into four patches. I have
also updated the documentation to reflect the new changes from the QEMU
side and rebased my changes fixing the tests in the process.

What changed in QEMU post version 6.1 ?
=========================================

We have made basically two major changes in QEMU. First is this change:

(1) commit 211afe5c69b597acf85fdd577eb497f5be1ffbd8
Author: Julia Suvorova <jusual@xxxxxxxxxx>
Date:   Fri Nov 12 06:08:56 2021 -0500

    hw/i386/acpi-build: Deny control on PCIe Native Hot-plug in _OSC
    
    There are two ways to enable ACPI PCI Hot-plug:
    
            * Disable the Hot-plug Capable bit on PCIe slots.
    
    This was the first approach which led to regression [1-2], as
    I/O space for a port is allocated only when it is hot-pluggable,
    which is determined by HPC bit.
    
            * Leave the HPC bit on and disable PCIe Native Hot-plug in _OSC
              method.
    
    This removes the (future) ability of hot-plugging switches with PCIe
    Native hotplug since ACPI PCI Hot-plug only works with cold-plugged
    bridges. If the user wants to explicitely use this feature, they can
    disable ACPI PCI Hot-plug with:
            --global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
    
    Change the bit in _OSC method so that the OS selects ACPI PCI Hot-plug
    instead of PCIe Native.
    
    [1] https://gitlab.com/qemu-project/qemu/-/issues/641
    [2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409
    
    Signed-off-by: Julia Suvorova <jusual@xxxxxxxxxx>
    Signed-off-by: Igor Mammedov <imammedo@xxxxxxxxxx>
    Message-Id: <20211112110857.3116853-5-imammedo@xxxxxxxxxx>
    Reviewed-by: Ani Sinha <ani@xxxxxxxxxxx>
    Reviewed-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
    Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>


The patch description says it all. Instead of masking out the HPC bit in
pcie slots, we keep them turned on. Instead, we do not advertize native
hotplug capability for PCIE using _OSC control method. See section
6.2.11 in ACPI spec 6.2. At the same time, we turn on ACPI hotplug for
these slots so now the guest OS can select ACPI hotplug instead.

The second change is introduction of a property with which we keep the
existing behavior for pc-q35-6.1 machines. This means HPC bit is masked
and ACPI hotplug is enabled by default for pcie root ports.
The QEMU commit is:

(2) commit c318bef76206c2ecb6016e8e68c4ac6ff9a4c8cb
Author: Julia Suvorova <jusual@xxxxxxxxxx>
Date:   Fri Nov 12 06:08:54 2021 -0500

    hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type
    
    To solve issues [1-2] the Hot Plug Capable bit in PCIe Slots will be
    turned on, while the switch to ACPI Hot-plug will be done in the
    DSDT table.
    
    Introducing 'x-keep-native-hpc' property disables the HPC bit only
    in 6.1 and as a result keeps the forced 'reserve-io' on
    pcie-root-ports in 6.1 too.
    
    [1] https://gitlab.com/qemu-project/qemu/-/issues/641
    [2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409
    
    Signed-off-by: Julia Suvorova <jusual@xxxxxxxxxx>
    Signed-off-by: Igor Mammedov <imammedo@xxxxxxxxxx>
    Message-Id: <20211112110857.3116853-3-imammedo@xxxxxxxxxx>
    Reviewed-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
    Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>

Lastly, as a related side note, because from QEMU 6.2 onwards, we do not
mask out HPC bit in PCIE, the work done by this patch is no longer
needed:

(3) commit e2a6290aab578b2170c1f5909fa556385dc0d820
Author: Marcel Apfelbaum <marcel.apfelbaum@xxxxxxxxx>
Date:   Mon Aug 2 12:00:57 2021 +0300

    hw/pcie-root-port: Fix hotplug for PCI devices requiring IO
    
    Q35 has now ACPI hotplug enabled by default for PCI(e) devices.
    As opposed to native PCIe hotplug, guests like Fedora 34
    will not assign IO range to pcie-root-ports not supporting
    native hotplug, resulting into a regression.
    
    Reproduce by:
        qemu-bin -M q35 -device pcie-root-port,id=p1 -monitor stdio
        device_add e1000,bus=p1
    In the Guest OS the respective pcie-root-port will have the IO range
    disabled.
    
    Fix it by setting the "reserve-io" hint capability of the
    pcie-root-ports so the firmware will allocate the IO range instead.
    
    Acked-by: Igor Mammedov <imammedo@xxxxxxxxxx>
    Signed-off-by: Marcel Apfelbaum <marcel@xxxxxxxxxx>
    Message-Id: <20210802090057.1709775-1-marcel@xxxxxxxxxx>
    Reviewed-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
    Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
 

This is what commit (2) alludes to. In pc-q35-6.1 machines we do need
patch (3) since we mask out HPC bit from pcie ports.


I know this is convoluted mess. In fairness I am trying all I can in my
spare time to help from the QEMU side. I am determined to see this
patchset through into libvirt.

Thanks

Ani Sinha (4):
  qemu: capablities: detect acpi-pci-hotplug-with-bridge-support
  conf: introduce support for acpi-bridge-hotplug feature
  qemu: command: add support for acpi-bridge-hotplug feature
  NEWS: document new acpi pci hotplug config option

 NEWS.rst                                      | 21 +++++
 docs/formatdomain.rst                         | 32 +++++++
 docs/schemas/domaincommon.rng                 | 15 ++++
 src/conf/domain_conf.c                        | 89 ++++++++++++++++++-
 src/conf/domain_conf.h                        |  9 ++
 src/qemu/qemu_capabilities.c                  |  4 +
 src/qemu/qemu_capabilities.h                  |  3 +
 src/qemu/qemu_command.c                       | 19 ++++
 src/qemu/qemu_validate.c                      | 42 +++++++++
 .../caps_6.1.0.x86_64.xml                     |  1 +
 .../caps_6.2.0.x86_64.xml                     |  1 +
 .../caps_7.0.0.x86_64.xml                     |  1 +
 ...-hotplug-bridge-disable.aarch64-latest.err |  1 +
 .../aarch64-acpi-hotplug-bridge-disable.xml   | 13 +++
 ...-hotplug-bridge-disable.x86_64-latest.args | 35 ++++++++
 .../pc-i440fx-acpi-hotplug-bridge-disable.xml | 36 ++++++++
 .../pc-i440fx-acpi-hotplug-bridge-enable.xml  | 36 ++++++++
 ...pi-hotplug-bridge-disable.x86_64-6.0.0.err |  1 +
 ...-hotplug-bridge-disable.x86_64-latest.args | 38 ++++++++
 .../q35-acpi-hotplug-bridge-disable.xml       | 53 +++++++++++
 .../q35-acpi-hotplug-bridge-enable.xml        | 53 +++++++++++
 tests/qemuxml2argvtest.c                      |  7 ++
 ...i-hotplug-bridge-disable.x86_64-latest.xml |  1 +
 ...pi-hotplug-bridge-enable.x86_64-latest.xml |  1 +
 ...i-hotplug-bridge-disable.x86_64-latest.xml |  1 +
 ...pi-hotplug-bridge-enable.x86_64-latest.xml |  1 +
 tests/qemuxml2xmltest.c                       |  4 +
 27 files changed, 517 insertions(+), 1 deletion(-)
 create mode 100644 tests/qemuxml2argvdata/aarch64-acpi-hotplug-bridge-disable.aarch64-latest.err
 create mode 100644 tests/qemuxml2argvdata/aarch64-acpi-hotplug-bridge-disable.xml
 create mode 100644 tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-disable.x86_64-latest.args
 create mode 100644 tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-disable.xml
 create mode 100644 tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-enable.xml
 create mode 100644 tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.x86_64-6.0.0.err
 create mode 100644 tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.x86_64-latest.args
 create mode 100644 tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.xml
 create mode 100644 tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-enable.xml
 create mode 120000 tests/qemuxml2xmloutdata/pc-i440fx-acpi-hotplug-bridge-disable.x86_64-latest.xml
 create mode 120000 tests/qemuxml2xmloutdata/pc-i440fx-acpi-hotplug-bridge-enable.x86_64-latest.xml
 create mode 120000 tests/qemuxml2xmloutdata/q35-acpi-hotplug-bridge-disable.x86_64-latest.xml
 create mode 120000 tests/qemuxml2xmloutdata/q35-acpi-hotplug-bridge-enable.x86_64-latest.xml

-- 
2.25.1




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux