From: Hyman Huang(黄勇) <huangy81@xxxxxxxxxxxxxxx>
Add calc_mode for dirtyrate statistics retured by
virsh domstats --dirtyrate api, also add vcpu dirtyrate
if dirty-ring mode was used in last measurement.
Signed-off-by: Hyman Huang(黄勇) <huangy81@xxxxxxxxxxxxxxx>
---
src/libvirt-domain.c | 5 +++++
src/qemu/qemu_driver.c | 14 ++++++++++++
src/qemu/qemu_monitor.h | 10 +++++++++
src/qemu/qemu_monitor_json.c | 52 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 81 insertions(+)
diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
index 4caa740..b1b6707 100644
--- a/src/libvirt-domain.c
+++ b/src/libvirt-domain.c
@@ -11941,6 +11941,11 @@ virConnectGetDomainCapabilities(virConnectPtr conn,
* "dirtyrate.megabytes_per_second" - the calculated memory dirty rate in
* MiB/s as long long. It is produced
* only if the calc_status is measured.
+ * "dirtyrate.calc_mode" - the calculation mode used last measurement as int,
+ * which is one of qemuMonitorDirtyRateCalcMode enum.
+ * "dirtyrate.vcpu.<num>.megabytes_per_second" - the calculated memory dirty
+ * rate for a virtual cpu as
+ * long long.
*
* Note that entire stats groups or individual stat fields may be missing from
* the output in case they are not supported by the given hypervisor, are not
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index feebfc4..09eda6b 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -18537,6 +18537,20 @@ qemuDomainGetStatsDirtyRate(virQEMUDriver *driver,
"dirtyrate.megabytes_per_second") < 0)
return -1;
+ if (virTypedParamListAddInt(params, info.mode,
+ "dirtyrate.calc_mode") < 0)
+ return -1;
+
+ if (info.mode == VIR_DOMAIN_DIRTYRATE_CALC_MODE_DIRTY_RING) {
+ int i;
+ for (i = 0; i < info.nvcpus; i++) {
+ if (virTypedParamListAddLLong(params, info.rates[i].value,
+ "dirtyrate.vcpu.%d.megabytes_per_second",
+ info.rates[i].index) < 0)
+ return -1;
+ }
+ }
+
return 0;
}
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 08e14c0..465feef 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -1563,6 +1563,12 @@ qemuMonitorStartDirtyRateCalc(qemuMonitor *mon,
int seconds,
qemuMonitorDirtyRateCalcMode mode);
+typedef struct _qemuMonitorDirtyRateVcpu qemuMonitorDirtyRateVcpu;
+struct _qemuMonitorDirtyRateVcpu {
+ int index; /* virtual cpu index */
+ long long value; /* virtual cpu dirty page rate in MB/s */
+};
+
typedef struct _qemuMonitorDirtyRateInfo qemuMonitorDirtyRateInfo;
struct _qemuMonitorDirtyRateInfo {
int status; /* the status of last dirtyrate calculation,
@@ -1570,6 +1576,10 @@ struct _qemuMonitorDirtyRateInfo {
int calcTime; /* the period of dirtyrate calculation */
long long startTime; /* the start time of dirtyrate calculation */
long long dirtyRate; /* the dirtyrate in MiB/s */
+ qemuMonitorDirtyRateCalcMode mode; /* calculation mode used in
+ last measurement */
+ size_t nvcpus; /* number of virtual cpu */
+ qemuMonitorDirtyRateVcpu *rates; /* array of dirty page rate */
};
int
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index afbd721..391f685 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -8741,11 +8741,45 @@ VIR_ENUM_IMPL(qemuMonitorDirtyRateStatus,
"measured");
static int
+qemuMonitorJSONExtractVcpuDirtyRate(virJSONValue *data,
+ qemuMonitorDirtyRateInfo *info)
+{
+ size_t nvcpus;
+ int i;
+
+ nvcpus = virJSONValueArraySize(data);
+ info->nvcpus = nvcpus;
+ info->rates = g_new0(qemuMonitorDirtyRateVcpu, nvcpus);
+
+ for (i = 0; i < nvcpus; i++) {
+ virJSONValue *entry = virJSONValueArrayGet(data, i);
+ if (virJSONValueObjectGetNumberInt(entry, "id",
+ &info->rates[i].index) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate reply was missing 'id' data"));
+ return -1;
+ }
+
+ if (virJSONValueObjectGetNumberLong(entry, "dirty-rate",
+ &info->rates[i].value) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate reply was missing 'dirty-rate' data"));
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int
qemuMonitorJSONExtractDirtyRateInfo(virJSONValue *data,
qemuMonitorDirtyRateInfo *info)
{
const char *statusstr;
+ const char *modestr;
int status;
+ int mode;
+ virJSONValue *rates = NULL;
if (!(statusstr = virJSONValueObjectGetString(data, "status"))) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
@@ -8782,6 +8816,24 @@ qemuMonitorJSONExtractDirtyRateInfo(virJSONValue *data,
return -1;
}
+ info->mode = VIR_DOMAIN_DIRTYRATE_CALC_MODE_PAGE_SAMPLING;
+ if ((modestr = virJSONValueObjectGetString(data, "mode"))) {
+ if ((mode = qemuMonitorDirtyRateCalcModeTypeFromString(modestr)) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Unknown dirtyrate calculation mode: %s"), modestr);
+ return -1;
+ }
+ info->mode = mode;
+ }
+
+ if ((rates = virJSONValueObjectGetArray(data, "vcpu-dirty-rate"))) {
+ if (qemuMonitorJSONExtractVcpuDirtyRate(rates, info) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("query-dirty-rate parsing 'vcpu-dirty-rate' in failure"));
+ return -1;
+ }
+ }
+
return 0;
}
--
1.8.3.1
