The PCI address case grew massive over time. Split it out into a new
function qemuBuildDeviceAddressPCIStr.
Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx>
---
src/qemu/qemu_command.c | 147 ++++++++++++++++++++++------------------
1 file changed, 82 insertions(+), 65 deletions(-)
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index bd34c6b48e..aeb04207b2 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -321,87 +321,104 @@ qemuVirCommandGetDevSet(virCommand *cmd, int fd)
static int
-qemuBuildDeviceAddressStr(virBuffer *buf,
- const virDomainDef *domainDef,
- virDomainDeviceInfo *info)
+qemuBuildDeviceAddressPCIStr(virBuffer *buf,
+ const virDomainDef *domainDef,
+ virDomainDeviceInfo *info)
{
g_autofree char *devStr = NULL;
const char *contAlias = NULL;
bool contIsPHB = false;
int contTargetIndex = 0;
+ size_t i;
- switch ((virDomainDeviceAddressType)info->type) {
- case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI: {
- size_t i;
+ if (!(devStr = virPCIDeviceAddressAsString(&info->addr.pci)))
+ return -1;
- if (!(devStr = virPCIDeviceAddressAsString(&info->addr.pci)))
- return -1;
- for (i = 0; i < domainDef->ncontrollers; i++) {
- virDomainControllerDef *cont = domainDef->controllers[i];
+ for (i = 0; i < domainDef->ncontrollers; i++) {
+ virDomainControllerDef *cont = domainDef->controllers[i];
- if (cont->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI &&
- cont->idx == info->addr.pci.bus) {
- contAlias = cont->info.alias;
- contIsPHB = virDomainControllerIsPSeriesPHB(cont);
- contTargetIndex = cont->opts.pciopts.targetIndex;
+ if (cont->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI &&
+ cont->idx == info->addr.pci.bus) {
+ contAlias = cont->info.alias;
+ contIsPHB = virDomainControllerIsPSeriesPHB(cont);
+ contTargetIndex = cont->opts.pciopts.targetIndex;
- if (!contAlias) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Device alias was not set for PCI "
- "controller with index %u required "
- "for device at address %s"),
- info->addr.pci.bus, devStr);
- return -1;
- }
+ if (!contAlias) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Device alias was not set for PCI "
+ "controller with index %u required "
+ "for device at address %s"),
+ info->addr.pci.bus, devStr);
+ return -1;
+ }
- if (virDomainDeviceAliasIsUserAlias(contAlias)) {
- /* When domain has builtin pci-root controller we don't put it
- * onto cmd line. Therefore we can't set its alias. In that
- * case, use the default one. */
- if (!qemuDomainIsPSeries(domainDef) &&
- cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT) {
- if (virQEMUCapsHasPCIMultiBus(domainDef))
- contAlias = "pci.0";
- else
- contAlias = "pci";
- } else if (cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT) {
- contAlias = "pcie.0";
- }
+ if (virDomainDeviceAliasIsUserAlias(contAlias)) {
+ /* When domain has builtin pci-root controller we don't put it
+ * onto cmd line. Therefore we can't set its alias. In that
+ * case, use the default one. */
+ if (!qemuDomainIsPSeries(domainDef) &&
+ cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT) {
+ if (virQEMUCapsHasPCIMultiBus(domainDef))
+ contAlias = "pci.0";
+ else
+ contAlias = "pci";
+ } else if (cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT) {
+ contAlias = "pcie.0";
}
- break;
}
+ break;
}
- if (!contAlias) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Could not find PCI "
- "controller with index %u required "
- "for device at address %s"),
- info->addr.pci.bus, devStr);
- return -1;
- }
+ }
- if (contIsPHB && contTargetIndex > 0) {
- /* The PCI bus created by a spapr-pci-host-bridge device with
- * alias 'x' will be called 'x.0' rather than 'x'; however,
- * this does not apply to the implicit PHB in a pSeries guest,
- * which always has the hardcoded name 'pci.0' */
- virBufferAsprintf(buf, ",bus=%s.0", contAlias);
- } else {
- /* For all other controllers, the bus name matches the alias
- * of the corresponding controller */
- virBufferAsprintf(buf, ",bus=%s", contAlias);
- }
+ if (!contAlias) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Could not find PCI "
+ "controller with index %u required "
+ "for device at address %s"),
+ info->addr.pci.bus, devStr);
+ return -1;
+ }
- if (info->addr.pci.multi == VIR_TRISTATE_SWITCH_ON)
- virBufferAddLit(buf, ",multifunction=on");
- else if (info->addr.pci.multi == VIR_TRISTATE_SWITCH_OFF)
- virBufferAddLit(buf, ",multifunction=off");
- virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot);
- if (info->addr.pci.function != 0)
- virBufferAsprintf(buf, ".0x%x", info->addr.pci.function);
- if (info->acpiIndex != 0)
- virBufferAsprintf(buf, ",acpi-index=%u", info->acpiIndex);
+ if (contIsPHB && contTargetIndex > 0) {
+ /* The PCI bus created by a spapr-pci-host-bridge device with
+ * alias 'x' will be called 'x.0' rather than 'x'; however,
+ * this does not apply to the implicit PHB in a pSeries guest,
+ * which always has the hardcoded name 'pci.0' */
+ virBufferAsprintf(buf, ",bus=%s.0", contAlias);
+ } else {
+ /* For all other controllers, the bus name matches the alias
+ * of the corresponding controller */
+ virBufferAsprintf(buf, ",bus=%s", contAlias);
}
+
+ if (info->addr.pci.multi == VIR_TRISTATE_SWITCH_ON)
+ virBufferAddLit(buf, ",multifunction=on");
+ else if (info->addr.pci.multi == VIR_TRISTATE_SWITCH_OFF)
+ virBufferAddLit(buf, ",multifunction=off");
+
+ virBufferAsprintf(buf, ",addr=0x%x", info->addr.pci.slot);
+
+ if (info->addr.pci.function != 0)
+ virBufferAsprintf(buf, ".0x%x", info->addr.pci.function);
+
+ if (info->acpiIndex != 0)
+ virBufferAsprintf(buf, ",acpi-index=%u", info->acpiIndex);
+
+ return 0;
+}
+
+
+static int
+qemuBuildDeviceAddressStr(virBuffer *buf,
+ const virDomainDef *domainDef,
+ virDomainDeviceInfo *info)
+{
+ const char *contAlias = NULL;
+
+ switch ((virDomainDeviceAddressType)info->type) {
+ case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI:
+ if (qemuBuildDeviceAddressPCIStr(buf, domainDef, info) < 0)
+ return -1;
break;
case VIR_DOMAIN_DEVICE_ADDRESS_TYPE_USB:
--
2.31.1
