[PATCH v5 16/16] kbase: Document virtio-mem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit adds new memorydevices.rst page which should serve
all models of memory devices. Yet, I'm documenting virtio-mem
quirks only.

Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx>
---
 docs/kbase/index.rst         |   4 +
 docs/kbase/memorydevices.rst | 150 +++++++++++++++++++++++++++++++++++
 docs/kbase/meson.build       |   1 +
 3 files changed, 155 insertions(+)
 create mode 100644 docs/kbase/memorydevices.rst

diff --git a/docs/kbase/index.rst b/docs/kbase/index.rst
index 351ea2c93b..09b19ed1af 100644
--- a/docs/kbase/index.rst
+++ b/docs/kbase/index.rst
@@ -52,6 +52,10 @@ Usage
 `PCI topology <../pci-addresses.html>`__
    Addressing schemes for PCI devices
 
+`Memory devices <memorydevices.html>`__
+   Memory devices and their use
+
+
 Internals / Debugging
 ---------------------
 
diff --git a/docs/kbase/memorydevices.rst b/docs/kbase/memorydevices.rst
new file mode 100644
index 0000000000..7f58a4247b
--- /dev/null
+++ b/docs/kbase/memorydevices.rst
@@ -0,0 +1,150 @@
+==============
+Memory devices
+==============
+
+.. contents::
+
+Basics
+======
+
+Memory devices can be divided into two families: volatile and non-volatile.
+The former is typical RAM memory: it's volatile and thus its contents doesn't
+survive guest reboots or power cycles. The latter retains its contents across
+reboots or power outages.
+
+In Libvirt, there are two models for volatile memory:
+
+* ``dimm`` model:
+
+  ::
+
+    <memory model='dimm'>
+      <target>
+        <size unit='KiB'>523264</size>
+        <node>0</node>
+      </target>
+      <address type='dimm' slot='0'/>
+    </memory>
+
+* ``virtio-mem`` model:
+
+  ::
+
+    <memory model='virtio-mem'>
+      <target>
+        <size unit='KiB'>1048576</size>
+        <node>0</node>
+        <block unit='KiB'>2048</block>
+        <requested unit='KiB'>524288</requested>
+      </target>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
+    </memory>
+
+Then there are two models for non-volatile memory:
+
+* ``nvdimm`` model:
+
+  ::
+
+    <memory model='nvdimm'>
+      <source>
+        <path>/tmp/nvdimm</path>
+      </source>
+      <target>
+        <size unit='KiB'>523264</size>
+        <node>0</node>
+      </target>
+      <address type='dimm' slot='0'/>
+    </memory>
+
+* ``virtio-pmem`` model:
+
+  ::
+
+    <memory model='virtio-pmem' access='shared'>
+      <source>
+        <path>/tmp/virtio_pmem</path>
+      </source>
+      <target>
+        <size unit='KiB'>524288</size>
+      </target>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
+    </memory>
+
+
+Please note that (maybe somewhat surprisingly) virtio models go onto PCI bus
+instead of DIMM slots.
+
+Furthermore, DIMMs can have ``<source/>`` element which configures backend for
+devices. For NVDIMMs the element is mandatory and reflects where the content
+is saved.
+
+See `memory devices documentation <../formatdomain.html#elementsMemory>`_.
+
+``virtio-mem`` model
+====================
+
+The ``virtio-mem`` model can be viewed as revised memory balloon. It offers
+adding and removing memory (without the actual hotplug of the device). It
+solves problems that memory balloon can't solve on its own and thus is more
+flexible than DIMM + balloon solution. ``virtio-mem`` is NUMA aware, and thus
+memory can be inflated/deflated only for a subset of guest NUMA nodes.  Also,
+it works with chunks that are either exposed to guest or reclaimed from it.
+
+See https://virtio-mem.gitlab.io/
+
+Under the hood, ``virtio-mem`` device is split into chunks of equal size which
+are then exposed to the guest. Either all of them or only a portion depending
+on user's request. Therefore there are three important sizes for
+``virtio-mem``. All are to be found under ``<target/>`` element:
+
+#. The maximum size the device can ever offer, exposed under ``<size/>``
+#. The size of a single block, exposed under ``<block/>``
+#. The current size exposed to the guest, exposed under ``<requested/>``
+
+For instance, in the following example the maximum size is 4GiB, the block size
+is 2MiB and only 1GiB should be exposed to the guest:
+
+  ::
+
+    <memory model='virtio-mem'>
+      <target>
+        <size unit='KiB'>4194304</size>
+        <block unit='KiB'>2048</block>
+        <requested unit='KiB'>1048576</requested>
+      </target>
+    </memory>
+
+Please note that ``<requested/>`` must be an integer multiple of ``<block/>``
+size or zero (no blocks exposed to the guest) and has to be less or equal to
+``<size/>`` (all blocks exposed to the guest). Furthermore, QEMU recommends the
+``<block/>`` size to be as big as a Transparent Huge Page (usually 2MiB).
+
+To change the size exposed to the guest, users should pass memory device XML
+with nothing but ``<requested/>`` changed into the
+``virDomainUpdateDeviceFlags()`` API. For user's convenience this can be done
+via virsh too:
+
+ ::
+
+   # virsh update-memory-device $dom --requested-size 2GiB
+
+If there are two or more ``<memory/>`` devices then ``--alias`` shall be used
+to tell virsh which memory device should be updated.
+
+For running guests there is fourth size that can be found under ``<target/>``:
+
+  ::
+
+    <current unit='KiB'>2097152</current>
+
+The ``<current/>`` reflects the current size used by the guest. In general it
+can differ from ``<requested/>``. Reasons include guest kernel missing
+``virtio-mem`` module and thus being unable to take offered memory, or guest
+kernel being unable to free memory.  Since ``<current/>`` only reports size to
+users, the element is never parsed. It is formatted only into live XML.
+
+Since changing ``<current/>`` allocation requires cooperation with guest
+kernel, requests for change are not instant. Therefore, libvirt emits
+``VIR_DOMAIN_EVENT_ID_MEMORY_DEVICE_SIZE_CHANGE`` event whenever current
+allocation changed.
diff --git a/docs/kbase/meson.build b/docs/kbase/meson.build
index 73dc11837f..af067db453 100644
--- a/docs/kbase/meson.build
+++ b/docs/kbase/meson.build
@@ -10,6 +10,7 @@ docs_kbase_files = [
   'locking-lockd',
   'locking',
   'locking-sanlock',
+  'memorydevices',
   'merging_disk_image_chains',
   'migrationinternals',
   'qemu-core-dump',
-- 
2.32.0




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux