Re: [libvirt PATCH v5 00/30] Add support for persistent mediated devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 25, 2021 at 11:49:49AM -0500, Jonathon Jongsma wrote:
> Just a friendly ping ;)

I'm sorry I've been neglecting this for the past 3 weeks or so, I'll dive right
into it starting Monday next week, we're entering freeze today anyway.
Would you mind resending a rebased version? There were a couple of conflicts
wrt to RPC, I fixed them all locally, but it's always better to start the
review with fresh content.

Thanks,
Erik

> 
> On Tue,  2 Mar 2021 16:30:35 -0600
> Jonathon Jongsma <jjongsma@xxxxxxxxxx> wrote:
> 
> > This patch series follows the previously-merged series which added
> > support for transient mediated devices. This series expands mdev
> > support to include persistent device definitions. Again, it relies on
> > mdevctl as the backend.
> > 
> > It follows the common libvirt pattern of APIs by adding the following
> > new APIs for node devices:
> >     - virNodeDeviceDefineXML() - defines a persistent device
> >     - virNodeDeviceUndefine() - undefines a persistent device
> >     - virNodeDeviceCreate() - starts a previously-defined device
> > 
> > It also adds virsh commands mapping to these new APIs: nodedev-define,
> > nodedev-undefine, and nodedev-start.
> > 
> > Since we rely on mdevctl for the definition of mediated devices, we
> > need a way to stay up-to-date with devices that are defined by
> > mdevctl (outside of libvirt).  The method for staying up-to-date is
> > currently a little bit crude due to the fact that mdevctl does not
> > emit any events when new devices are added or removed. As a
> > workaround, we create a file monitor for the mdevctl config directory
> > and re-query mdevctl when we detect changes within that directory. In
> > the future, mdevctl may introduce a more elegant solution.
> > 
> > Changes in v5:
> >  - Rebase to git master
> >  - updated new API version info to 7.2.0
> >  - capture and relay stderr message from mdevctl
> >  - changed to using GHashTable functions directly instead of
> > deprecated virHash functions
> >  - protected mdevctlMonitors with a mutex
> >  - added a couple patches to fix the 5s delay when defining a new
> > mdev. These are currently separate patches added to the end of the
> > series, but could be squashed into the earlier commits if that's
> > preferred.
> >  - various other minor review fixes
> > 
> > Changes in v4:
> >  - rebase to git master
> >  - switch to throwaway thread for querying mdevctl
> >  - fixed a bug when removing devices because I was accidentally using
> >    virHashForEach() instead of virHashForeachSafe()
> >  - use DEFINED/UNDEFINED events instead of STARTED/STOPPED events
> >  - changes related to merging information about mdev devices from
> > both udev a= nd
> >    mdevctl:
> >    - Re-used the same function to copy extra data from mdevctl
> > regardless of whether we're processing a udev event or a mdevctl
> > event (recommended by Erik). This results in slightly more complex
> > handling of the object lifetimes (see patch 9), but it consolidates
> > some code.
> >    - nodeDeviceDefCopyFromMdevctl() previously only copied the data
> > that was unique to mdevctl and didn't exist in udev. It now copies
> > additional data (possibly overwriting some udev).  This solves a
> > problem where a device = is
> >      defined but not active (i.e.  we have not gotten any data from
> > udev), and then changed (e.g. somebody calls 'mdevctl modify' to
> > change the mdev type), but libvirt was not updating to the new
> > definition.
> >  - fix a bug where we were mistakenly emitting 'update' events for
> > devices th= at
> >    had not changed
> >  - Added the ability to specify a uuid for an mdev via device XML.
> >  - split some commits into multiple patches
> >  - updated new API version info to 7.1.0
> >  - Fixed a bug reported by Yan Fu which hangs the client when
> > attempting to destroy a nodedev that is in use by an active vm. See
> >    https://www.redhat.com/archives/libvir-list/2021-February/msg00116.html
> > for solution suggested by Alex.
> >  - numerous smaller fixes from review findings
> > 
> > changes in v3:
> >  - streamlined tests -- removed some unnecessary duplication
> >  - split out patch to factor out node device name generation function
> >  - split nodeDeviceParseMdevctlChildDevice() into a separate function
> >  - added follow-up patch to remove space-padded alignment in header
> >  - refactored the mdevctl update handling significantly:
> >    - no longer a separate persistent thread that gets signaled by a
> > timer
> >    - now piggybacks onto the existing udev thread and signals the
> > thread in t= he
> >      same way that the udev event does.
> >    - Daniel suggested spawning a throw-away thread to handle mdevctl
> > updates, but that introduces the complexity of possibly serializing
> > multiple throw-away threads (e.g. if we get an 'created' event
> > followed immediate= ly
> >      by a 'deleted' event, two threads may be spawned and we'd need
> > to ensure they are properly ordered)
> >  - added virNodeDeviceObjListForEach() and
> > virNodeDeviceObjListRemoveLocked() to simplify removing devices that
> > are removed from mdevctl.
> >  - coding style fixes
> >  - NOTE: per Erik's request, I experimented with changing the way
> > that mdevctl commands were generated and tested (e.g. introducing
> > something like virMdevctlGetCommand(def,
> > MDEVCTL_COMMAND_<SUBCOMMAND>, ...)), but it was too invasive and
> > awkward and didn't seem worthwhile
> > 
> > Changes in v2:
> >  - rebase to latest git master
> > 
> > Jonathon Jongsma (30):
> >   nodedev: capture and report stderror from mdevctl
> >   tests: remove extra trailing semicolon
> >   nodedev: introduce concept of 'active' node devices
> >   nodedev: Add ability to filter by active state
> >   nodedev: fix docs for virConnectListAllNodeDevices()
> >   nodedev: expose internal helper for naming devices
> >   nodedev: add ability to parse mdevs from mdevctl
> >   nodedev: add ability to list defined mdevs
> >   nodedev: add persistence to virNodeDeviceObj
> >   nodedev: add DEFINED/UNDEFINED lifecycle events
> >   nodedev: add mdevctl devices to node device list
> >   nodedev: add helper functions to remove node devices
> >   nodedev: handle mdevs that disappear from mdevctl
> >   nodedev: Refresh mdev devices when changes are detected
> >   nodedev: add function to generate mdevctl define command
> >   api: add virNodeDeviceDefineXML()
> >   virsh: Add --inactive, --all to nodedev-list
> >   virsh: add nodedev-define command
> >   nodedev: refactor tests to support mdev undefine
> >   api: add virNodeDeviceUndefine()
> >   virsh: Factor out function to find node device
> >   virsh: add nodedev-undefine command
> >   api: add virNodeDeviceCreate()
> >   virsh: add "nodedev-start" command
> >   nodedev: add <uuid> element to mdev caps
> >   nodedev: add ability to specify UUID for new mdevs
> >   nodedev: fix hang when destroying an mdev in use
> >   nodedev: add docs about mdev attribute order
> >   nodedev: factor out function to add mediated devices
> >   nodedev: avoid delay when defining a new mdev
> > 
> >  docs/formatnode.html.in                       |   5 +-
> >  docs/schemas/nodedev.rng                      |  43 +-
> >  examples/c/misc/event-test.c                  |   4 +
> >  include/libvirt/libvirt-nodedev.h             |  20 +-
> >  src/access/viraccessperm.c                    |   2 +-
> >  src/access/viraccessperm.h                    |   6 +
> >  src/conf/node_device_conf.c                   |  14 +
> >  src/conf/node_device_conf.h                   |   8 +
> >  src/conf/virnodedeviceobj.c                   | 147 +++-
> >  src/conf/virnodedeviceobj.h                   |  24 +
> >  src/driver-nodedev.h                          |  14 +
> >  src/libvirt-nodedev.c                         | 141 +++-
> >  src/libvirt_private.syms                      |   6 +
> >  src/libvirt_public.syms                       |   7 +
> >  src/node_device/node_device_driver.c          | 743
> > +++++++++++++++++- src/node_device/node_device_driver.h          |
> > 50 +- src/node_device/node_device_udev.c            | 217 ++++-
> >  src/remote/remote_driver.c                    |   3 +
> >  src/remote/remote_protocol.x                  |  40 +-
> >  src/remote_protocol-structs                   |  16 +
> >  src/rpc/gendispatch.pl                        |   1 +
> >  ...19_36ea_4111_8f0a_8c9a70e21366-define.argv |   2 +
> >  ...19_36ea_4111_8f0a_8c9a70e21366-define.json |   1 +
> >  ...019_36ea_4111_8f0a_8c9a70e21366-start.argv |   3 +-
> >  ...39_495e_4243_ad9f_beb3f14c23d9-define.argv |   1 +
> >  ...39_495e_4243_ad9f_beb3f14c23d9-define.json |   1 +
> >  ...16_1ca8_49ac_b176_871d16c13076-define.argv |   1 +
> >  ...16_1ca8_49ac_b176_871d16c13076-define.json |   1 +
> >  tests/nodedevmdevctldata/mdevctl-create.argv  |   1 +
> >  .../mdevctl-list-defined.argv                 |   1 +
> >  .../mdevctl-list-multiple.json                |  59 ++
> >  .../mdevctl-list-multiple.out.xml             |  43 +
> >  .../nodedevmdevctldata/mdevctl-undefine.argv  |   1 +
> >  tests/nodedevmdevctltest.c                    | 232 +++++-
> >  ...v_d069d019_36ea_4111_8f0a_8c9a70e21366.xml |   1 +
> >  tools/virsh-nodedev.c                         | 269 ++++++-
> >  36 files changed, 1935 insertions(+), 193 deletions(-)
> >  create mode 100644
> > tests/nodedevmdevctldata/mdev_d069d019_36ea_4111_8f0a_8c9=
> > a70e21366-define.argv create mode 100644
> > tests/nodedevmdevctldata/mdev_d069d019_36ea_4111_8f0a_8c9=
> > a70e21366-define.json create mode 100644
> > tests/nodedevmdevctldata/mdev_d2441d39_495e_4243_ad9f_beb=
> > 3f14c23d9-define.argv create mode 100644
> > tests/nodedevmdevctldata/mdev_d2441d39_495e_4243_ad9f_beb=
> > 3f14c23d9-define.json create mode 100644
> > tests/nodedevmdevctldata/mdev_fedc4916_1ca8_49ac_b176_871=
> > d16c13076-define.argv create mode 100644
> > tests/nodedevmdevctldata/mdev_fedc4916_1ca8_49ac_b176_871=
> > d16c13076-define.json create mode 100644
> > tests/nodedevmdevctldata/mdevctl-create.argv create mode 100644
> > tests/nodedevmdevctldata/mdevctl-list-defined.argv create mode 100644
> > tests/nodedevmdevctldata/mdevctl-list-multiple.json create mode
> > 100644 tests/nodedevmdevctldata/mdevctl-list-multiple.out.xml create
> > mode 100644 tests/nodedevmdevctldata/mdevctl-undefine.argv
> > 
> > --=20
> > 2.26.2
> > 
> > 
> 




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux