[PATCH v2 05/13] conf: Introduce virtio-mem <memory/> model

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The virtio-mem is paravirtualized mechanism of adding/removing
memory to/from a VM. A virtio-mem-pci device is split into blocks
of equal size which are then exposed (all or only a requested
portion of them) to the guest kernel to use as regular memory.
Therefore, the device has two important attributes:

  1) block-size, which defines the size of a block
  2) requested-size, which defines how much memory (in bytes)
     is the device requested to expose to the guest.

The 'block-size' is configured on command line and immutable
throughout device's lifetime. The 'requested-size' can be set on
the command line too, but also is adjustable via monitor. In
fact, that is how management software places its requests to
change the memory allocation. If it wants to give more memory to
the guest it changes 'requested-size' to a bigger value, and if it
wants to shrink guest memory it changes the 'requested-size' to a
smaller value. Note, value of zero means that guest should
release all memory offered by the device. Of course, guest has to
cooperate. Therefore, there is a third attribute 'size' which is
read only and reflects how much memory the guest still has. This
can be different to 'requested-size', obviously. Because of name
clash, I've named it 'actualsize' and it is dealt with in future
commits (it is a runtime information anyway).

In the backend, memory for virtio-mem is backed by usual objects:
memory-backend-{ram,file,memfd} and their size puts the cap on
the amount of memory that a virtio-mem device can offer to a
guest. But we are already able to express this info using <size/>
under <target/>.

Therefore, we need only two more elements to cover 'block-size'
and 'requested-size' attributes. This is the XML I've came up
with:

  <memory model='virtio-mem'>
    <source>
      <nodemask>1-3</nodemask>
      <pagesize unit='KiB'>2048</pagesize>
    </source>
    <target>
      <size unit='KiB'>2097152</size>
      <node>0</node>
      <block unit='KiB'>2048</block>
      <requested unit='KiB'>1048576</requested>
    </target>
    <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
  </memory>

I hope by now it is obvious that:

  1) 'requested-size' must be an integer multiple of
     'block-size', and
  2) virtio-mem-pci device goes onto PCI bus and thus needs PCI
     address.

Then there is a limitation that the minimal 'block-size' is
transparent huge page size (I'll leave this without explanation).

Since now we have (possibly) two or more devices that allow
memory inflation/deflation and accounting for all of them (and
thus keeping <currentMemory/> updated) might be hard. Therefore,
I'm deliberately forbidding memballoon. It's okay - virtio-mem is
superior to memballoon anyway. We can always reevaluate later.

Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx>
---
 docs/formatdomain.rst                         | 51 +++++++++++++--
 docs/schemas/domaincommon.rng                 | 11 ++++
 src/conf/domain_conf.c                        | 53 ++++++++++++++-
 src/conf/domain_conf.h                        |  3 +
 src/conf/domain_validate.c                    | 39 +++++++++++
 src/qemu/qemu_alias.c                         |  1 +
 src/qemu/qemu_command.c                       |  1 +
 src/qemu/qemu_domain.c                        | 27 +++++++-
 src/qemu/qemu_domain_address.c                | 38 ++++++++---
 src/qemu/qemu_process.c                       |  2 +
 src/qemu/qemu_validate.c                      | 22 ++++++-
 src/security/security_apparmor.c              |  1 +
 src/security/security_dac.c                   |  2 +
 src/security/security_selinux.c               |  2 +
 .../memory-hotplug-virtio-mem.xml             | 64 +++++++++++++++++++
 ...emory-hotplug-virtio-mem.x86_64-latest.xml |  1 +
 tests/qemuxml2xmltest.c                       |  1 +
 17 files changed, 298 insertions(+), 21 deletions(-)
 create mode 100644 tests/qemuxml2argvdata/memory-hotplug-virtio-mem.xml
 create mode 120000 tests/qemuxml2xmloutdata/memory-hotplug-virtio-mem.x86_64-latest.xml

diff --git a/docs/formatdomain.rst b/docs/formatdomain.rst
index 2587106191..05d359a32d 100644
--- a/docs/formatdomain.rst
+++ b/docs/formatdomain.rst
@@ -6924,6 +6924,8 @@ appropriate, so there is no need to explicitly add this element in the guest XML
 unless a specific PCI slot needs to be assigned. :since:`Since 0.8.3, Xen, QEMU
 and KVM only` Additionally, :since:`since 0.8.4` , if the memballoon device
 needs to be explicitly disabled, ``model='none'`` may be used.
+Using memballoon among with ``virtio-mem`` memory device is unsupported. In
+that case, setting model to anything else then ``none`` results in an error.
 
 Example: automatically added device with KVM
 
@@ -6935,6 +6937,16 @@ Example: automatically added device with KVM
    </devices>
    ...
 
+Example: automatically added device with QEMU/KVM and a ``virtio-mem`` device:
+
+::
+
+   ...
+   <devices>
+     <memballoon model='none'/>
+   </devices>
+   ...
+
 Example: manually added device with static PCI slot 2 requested
 
 ::
@@ -7374,6 +7386,18 @@ Example: usage of the memory devices
          <size unit='KiB'>524288</size>
        </target>
      </memory>
+     <memory model='virtio-mem'>
+       <source>
+         <nodemask>1-3</nodemask>
+         <pagesize unit='KiB'>2048</pagesize>
+       </source>
+       <target>
+         <size unit='KiB'>2097152</size>
+         <node>0</node>
+         <block unit='KiB'>2048</block>
+         <requested unit='KiB'>1048576</requested>
+       </target>
+     </memory>
    </devices>
    ...
 
@@ -7381,7 +7405,9 @@ Example: usage of the memory devices
    Provide ``dimm`` to add a virtual DIMM module to the guest. :since:`Since
    1.2.14` Provide ``nvdimm`` model that adds a Non-Volatile DIMM module.
    :since:`Since 3.2.0` Provide ``virtio-pmem`` model to add a paravirtualized
-   persistent memory device. :since:`Since 7.1.0`
+   persistent memory device. :since:`Since 7.1.0` Provide ``virtio-mem`` model
+   to add paravirtualized memory device. :since:`Since 7.1.0` Please note that
+   using ``virtio-mem`` with memory balloon is unsupported.
 
 ``access``
    An optional attribute ``access`` ( :since:`since 3.2.0` ) that provides
@@ -7404,10 +7430,11 @@ Example: usage of the memory devices
    allowed only for ``model='nvdimm'`` for pSeries guests. :since:`Since 6.2.0`
 
 ``source``
-   For model ``dimm`` this element is optional and allows to fine tune the
-   source of the memory used for the given memory device. If the element is not
-   provided defaults configured via ``numatune`` are used. If ``dimm`` is
-   provided, then the following optional elements can be provided as well:
+   For model ``dimm`` and model ``virtio-mem`` this element is optional and
+   allows to fine tune the source of the memory used for the given memory
+   device. If the element is not provided defaults configured via ``numatune``
+   are used. If the element is provided, then the following optional elements
+   can be provided:
 
    ``pagesize``
       This element can be used to override the default host page size used for
@@ -7446,7 +7473,8 @@ Example: usage of the memory devices
    added memory from the perspective of the guest.
 
    The mandatory ``size`` subelement configures the size of the added memory as
-   a scaled integer.
+   a scaled integer. For ``virtio-mem`` this represents the maximum possible
+   size exposed to the guest.
 
    The ``node`` subelement configures the guest NUMA node to attach the memory
    to. The element shall be used only if the guest has NUMA nodes configured.
@@ -7473,6 +7501,17 @@ Example: usage of the memory devices
       so other backend types should use the ``readonly`` element. :since:`Since
       5.0.0`
 
+   ``block``
+     For ``virtio-mem`` only.
+     The size of an individual block, granularity of division of memory module.
+     Must be power of two and at least equal to size of a transparent hugepage
+     (2MiB on x84_64). The default is hypervisor dependent.
+
+   ``requested``
+     For ``virtio-mem`` only.
+     The total size exposed to the guest. Must respect ``block`` granularity
+     and be smaller or equal to ``size``.
+
 :anchor:`<a id="elementsIommu"/>`
 
 IOMMU devices
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index e6de934456..1f672756bd 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -6056,6 +6056,7 @@
           <value>dimm</value>
           <value>nvdimm</value>
           <value>virtio-pmem</value>
+          <value>virtio-mem</value>
         </choice>
       </attribute>
       <optional>
@@ -6140,6 +6141,16 @@
             <ref name="unsignedInt"/>
           </element>
         </optional>
+        <optional>
+          <element name="block">
+            <ref name="scaledInteger"/>
+          </element>
+        </optional>
+        <optional>
+          <element name="requested">
+            <ref name="scaledInteger"/>
+          </element>
+        </optional>
         <optional>
           <element name="label">
             <element name="size">
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index b731744f04..f4c08ef43d 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -1329,6 +1329,7 @@ VIR_ENUM_IMPL(virDomainMemoryModel,
               "dimm",
               "nvdimm",
               "virtio-pmem",
+              "virtio-mem",
 );
 
 VIR_ENUM_IMPL(virDomainShmemModel,
@@ -5369,6 +5370,7 @@ virDomainMemoryDefPostParse(virDomainMemoryDefPtr mem,
         }
         break;
 
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
@@ -15392,6 +15394,7 @@ virDomainMemorySourceDefParseXML(xmlNodePtr node,
 
     switch (def->model) {
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
         if (virDomainParseMemory("./pagesize", "./pagesize/@unit", ctxt,
                                  &def->pagesize, false, false) < 0)
             return -1;
@@ -15458,7 +15461,8 @@ virDomainMemoryTargetDefParseXML(xmlNodePtr node,
                              &def->size, true, false) < 0)
         return -1;
 
-    if (def->model == VIR_DOMAIN_MEMORY_MODEL_NVDIMM) {
+    switch (def->model) {
+    case VIR_DOMAIN_MEMORY_MODEL_NVDIMM:
         if (virDomainParseMemory("./label/size", "./label/size/@unit", ctxt,
                                  &def->labelsize, false, false) < 0)
             return -1;
@@ -15477,6 +15481,23 @@ virDomainMemoryTargetDefParseXML(xmlNodePtr node,
 
         if (virXPathBoolean("boolean(./readonly)", ctxt))
             def->readonly = true;
+        break;
+
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
+        if (virDomainParseMemory("./block", "./block/@unit", ctxt,
+                                 &def->blocksize, false, false) < 0)
+            return -1;
+
+        if (virDomainParseMemory("./requested", "./requested/@unit", ctxt,
+                                 &def->requestedsize, false, false) < 0)
+            return -1;
+        break;
+
+    case VIR_DOMAIN_MEMORY_MODEL_NONE:
+    case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM:
+    case VIR_DOMAIN_MEMORY_MODEL_LAST:
+        break;
     }
 
     return 0;
@@ -17294,11 +17315,14 @@ virDomainMemoryFindByDefInternal(virDomainDefPtr def,
         /* target info -> always present */
         if (tmp->model != mem->model ||
             tmp->targetNode != mem->targetNode ||
-            tmp->size != mem->size)
+            tmp->size != mem->size ||
+            tmp->blocksize != mem->blocksize ||
+            tmp->requestedsize != mem->requestedsize)
             continue;
 
         switch (mem->model) {
         case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+        case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
             /* source stuff -> match with device */
             if (tmp->pagesize != mem->pagesize)
                 continue;
@@ -22873,6 +22897,22 @@ virDomainMemoryDefCheckABIStability(virDomainMemoryDefPtr src,
         return false;
     }
 
+    if (src->blocksize != dst->blocksize) {
+        virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                       _("Target memory device block size '%llu' doesn't match "
+                         "source memory device block size '%llu'"),
+                       dst->blocksize, src->blocksize);
+        return false;
+    }
+
+    if (src->requestedsize != dst->requestedsize) {
+        virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                       _("Target memory device requested size '%llu' doesn't match "
+                         "source memory device requested size '%llu'"),
+                       dst->requestedsize, src->requestedsize);
+        return false;
+    }
+
     if (src->model == VIR_DOMAIN_MEMORY_MODEL_NVDIMM) {
         if (src->labelsize != dst->labelsize) {
             virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
@@ -26629,6 +26669,7 @@ virDomainMemorySourceDefFormat(virBufferPtr buf,
 
     switch (def->model) {
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
         if (def->sourceNodes) {
             if (!(bitmap = virBitmapFormat(def->sourceNodes)))
                 return -1;
@@ -26685,6 +26726,14 @@ virDomainMemoryTargetDefFormat(virBufferPtr buf,
     if (def->readonly)
         virBufferAddLit(&childBuf, "<readonly/>\n");
 
+    if (def->blocksize) {
+        virBufferAsprintf(&childBuf, "<block unit='KiB'>%llu</block>\n",
+                          def->blocksize);
+
+        virBufferAsprintf(&childBuf, "<requested unit='KiB'>%llu</requested>\n",
+                          def->requestedsize);
+    }
+
     virXMLFormatElement(buf, "target", NULL, &childBuf);
 }
 
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index 930eed60de..14d238df4b 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -2312,6 +2312,7 @@ typedef enum {
     VIR_DOMAIN_MEMORY_MODEL_DIMM, /* dimm hotpluggable memory device */
     VIR_DOMAIN_MEMORY_MODEL_NVDIMM, /* nvdimm memory device */
     VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM, /* virtio-pmem memory device */
+    VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM, /* virtio-mem memory device */
 
     VIR_DOMAIN_MEMORY_MODEL_LAST
 } virDomainMemoryModel;
@@ -2332,6 +2333,8 @@ struct _virDomainMemoryDef {
     int targetNode;
     unsigned long long size; /* kibibytes */
     unsigned long long labelsize; /* kibibytes; valid only for NVDIMM */
+    unsigned long long blocksize; /* kibibytes; valid only for VIRTIO_MEM */
+    unsigned long long requestedsize; /* kibibytes; valid only for VIRTIO_MEM */
     bool readonly; /* valid only for NVDIMM */
 
     /* required for QEMU NVDIMM ppc64 support */
diff --git a/src/conf/domain_validate.c b/src/conf/domain_validate.c
index b47ecba86b..7ab91c8f2f 100644
--- a/src/conf/domain_validate.c
+++ b/src/conf/domain_validate.c
@@ -26,6 +26,7 @@
 #include "virconftypes.h"
 #include "virlog.h"
 #include "virutil.h"
+#include "virhostmem.h"
 
 #define VIR_FROM_THIS VIR_FROM_DOMAIN
 
@@ -1612,6 +1613,8 @@ static int
 virDomainMemoryDefValidate(const virDomainMemoryDef *mem,
                            const virDomainDef *def)
 {
+    unsigned long long thpSize;
+
     switch (mem->model) {
     case VIR_DOMAIN_MEMORY_MODEL_NVDIMM:
         if (!mem->nvdimmPath) {
@@ -1665,6 +1668,42 @@ virDomainMemoryDefValidate(const virDomainMemoryDef *mem,
                            _("virtio-pmem does not support NUMA nodes"));
             return -1;
         }
+        break;
+
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
+        if (mem->requestedsize > mem->size) {
+            virReportError(VIR_ERR_XML_DETAIL, "%s",
+                           _("requested size must be smaller than @size"));
+            return -1;
+        }
+
+        if (!VIR_IS_POW2(mem->blocksize)) {
+            virReportError(VIR_ERR_XML_DETAIL, "%s",
+                           _("block size must be a power of two"));
+            return -1;
+        }
+
+        if (virHostMemGetTHPSize(&thpSize) < 0) {
+            /* We failed to get THP size, fall back to a sane default. On
+             * almost every architecture the size will be 2MiB, except for some
+             * funky arches like sparc and m68k. Use 2MiB and refine later if
+             * somebody complains. */
+            thpSize = 2048;
+        }
+
+        if (mem->blocksize < thpSize) {
+            virReportError(VIR_ERR_XML_DETAIL,
+                           _("block size too small, must be at least %lluKiB"),
+                           thpSize);
+            return -1;
+        }
+
+        if (mem->requestedsize % mem->blocksize != 0) {
+            virReportError(VIR_ERR_XML_DETAIL, "%s",
+                           _("requested size must be an integer multiple of block size"));
+            return -1;
+        }
+        break;
 
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
         break;
diff --git a/src/qemu/qemu_alias.c b/src/qemu/qemu_alias.c
index 1c6f04c0ba..1a330829a3 100644
--- a/src/qemu/qemu_alias.c
+++ b/src/qemu/qemu_alias.c
@@ -522,6 +522,7 @@ qemuAssignDeviceMemoryAlias(virDomainDefPtr def,
     case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM:
         prefix = "virtiopmem";
         break;
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
     default:
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index d801018aa2..ac9a8c9f6a 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -3355,6 +3355,7 @@ qemuBuildMemoryDeviceStr(const virDomainDef *def,
         device = "virtio-pmem-pci";
         break;
 
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
     default:
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index 541d592bbe..26b9b5583e 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -3679,10 +3679,21 @@ qemuDomainDefAddDefaultDevices(virDomainDefPtr def,
     }
 
     if (addDefaultMemballoon && !def->memballoon) {
-        virDomainMemballoonDefPtr memballoon;
-        memballoon = g_new0(virDomainMemballoonDef, 1);
+        virDomainMemballoonDefPtr memballoon = g_new0(virDomainMemballoonDef, 1);
+        size_t i;
 
-        memballoon->model = VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO;
+        /* To simplify virtio-mem implementation, memballoon has to be turned
+         * off if domain has a virtio-mem device. See
+         * qemuValidateDomainDeviceDefMemory() for more details. */
+        for (i = 0; i < def->nmems; i++) {
+            if (def->mems[i]->model == VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM)
+                break;
+        }
+
+        if (i == def->nmems)
+            memballoon->model = VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO;
+        else
+            memballoon->model = VIR_DOMAIN_MEMBALLOON_MODEL_NONE;
         def->memballoon = memballoon;
     }
 
@@ -8775,6 +8786,16 @@ qemuDomainDefValidateMemoryHotplugDevice(const virDomainMemoryDef *mem,
         needsNuma = false;
         break;
 
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
+        if (mem->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI &&
+            mem->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
+            virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                           _("only 'pci' addresses are supported for the %s device"),
+                           virDomainMemoryModelTypeToString(mem->model));
+            return -1;
+        }
+        break;
+
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
         return -1;
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 68dbf9e95b..64c57f1cad 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -380,9 +380,18 @@ qemuDomainPrimeVirtioDeviceAddresses(virDomainDefPtr def,
     }
 
     for (i = 0; i < def->nmems; i++) {
-        if (def->mems[i]->model == VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM &&
-            def->mems[i]->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
-            def->mems[i]->info.type = type;
+        switch (def->mems[i]->model) {
+        case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM:
+        case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
+            if (def->mems[i]->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
+                def->mems[i]->info.type = type;
+            break;
+        case VIR_DOMAIN_MEMORY_MODEL_NONE:
+        case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+        case VIR_DOMAIN_MEMORY_MODEL_NVDIMM:
+        case VIR_DOMAIN_MEMORY_MODEL_LAST:
+            break;
+        }
     }
 
     if (type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) {
@@ -1011,6 +1020,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
     case VIR_DOMAIN_DEVICE_MEMORY:
         switch (dev->data.memory->model) {
         case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM:
+        case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
             return virtioFlags;
 
         case VIR_DOMAIN_MEMORY_MODEL_NONE:
@@ -2438,12 +2448,19 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
     for (i = 0; i < def->nmems; i++) {
         virDomainMemoryDefPtr mem = def->mems[i];
 
-        if (mem->model != VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM ||
-            !virDeviceInfoPCIAddressIsWanted(&mem->info))
-            continue;
-
-        if (qemuDomainPCIAddressReserveNextAddr(addrs, &mem->info) < 0)
-            return -1;
+        switch (mem->model) {
+        case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM:
+        case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
+            if (virDeviceInfoPCIAddressIsWanted(&mem->info) &&
+                qemuDomainPCIAddressReserveNextAddr(addrs, &mem->info) < 0)
+                return -1;
+            break;
+        case VIR_DOMAIN_MEMORY_MODEL_NONE:
+        case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+        case VIR_DOMAIN_MEMORY_MODEL_NVDIMM:
+        case VIR_DOMAIN_MEMORY_MODEL_LAST:
+            break;
+        }
     }
 
     return 0;
@@ -3110,6 +3127,7 @@ qemuDomainAssignMemoryDeviceSlot(virQEMUDriverPtr driver,
         break;
 
     case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
         return qemuDomainEnsurePCIAddress(vm, &dev, driver);
         break;
 
@@ -3135,6 +3153,7 @@ qemuDomainReleaseMemoryDeviceSlot(virDomainObjPtr vm,
         break;
 
     case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
         qemuDomainReleaseDeviceAddress(vm, &mem->info);
         break;
 
@@ -3169,6 +3188,7 @@ qemuDomainAssignMemorySlots(virDomainDefPtr def)
             break;
 
         case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_PMEM:
+        case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
             /* handled in qemuDomainAssignPCIAddresses() */
             break;
         case VIR_DOMAIN_MEMORY_MODEL_NONE:
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index 066f153703..ebf42259b5 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -3869,6 +3869,7 @@ qemuProcessDomainMemoryDefNeedHugepagesPath(const virDomainMemoryDef *mem,
 {
     switch (mem->model) {
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
         return mem->pagesize &&
             mem->pagesize != system_pagesize;
 
@@ -3933,6 +3934,7 @@ qemuProcessNeedMemoryBackingPath(virDomainDefPtr def,
     if (mem) {
         switch (mem->model) {
         case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+        case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
             if (mem->access != VIR_DOMAIN_MEMORY_ACCESS_DEFAULT) {
                 /* No need to check for access mode on the target node,
                  * it was checked for in the previous loop. */
diff --git a/src/qemu/qemu_validate.c b/src/qemu/qemu_validate.c
index 2541ae856a..6150083251 100644
--- a/src/qemu/qemu_validate.c
+++ b/src/qemu/qemu_validate.c
@@ -4653,6 +4653,7 @@ qemuValidateDomainDeviceDefHub(virDomainHubDefPtr hub,
 
 static int
 qemuValidateDomainDeviceDefMemory(virDomainMemoryDefPtr mem,
+                                  const virDomainDef *def,
                                   virQEMUCapsPtr qemuCaps)
 {
     switch (mem->model) {
@@ -4688,6 +4689,25 @@ qemuValidateDomainDeviceDefMemory(virDomainMemoryDefPtr mem,
         }
         break;
 
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
+        /* Accounting balloon and virtio-mem is hard. We have plenty of APIs
+         * which take balloon from QEMU and report it to users. We would have
+         * to change all that and account for virtio-mem actual size.  Also,
+         * virtio-mem is supposed to be replacement for balloon. Disable
+         * coexistence of these two for now. */
+        if (virDomainDefHasMemballoon(def)) {
+            virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                           _("virtio-mem is not supported with memory balloon"));
+            return -1;
+        }
+
+        if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI)) {
+            virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                           _("virtio-mem isn't supported by this QEMU binary"));
+            return -1;
+        }
+        break;
+
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
         break;
@@ -4842,7 +4862,7 @@ qemuValidateDomainDeviceDef(const virDomainDeviceDef *dev,
         break;
 
     case VIR_DOMAIN_DEVICE_MEMORY:
-        ret = qemuValidateDomainDeviceDefMemory(dev->data.memory, qemuCaps);
+        ret = qemuValidateDomainDeviceDefMemory(dev->data.memory, def, qemuCaps);
         break;
 
     case VIR_DOMAIN_DEVICE_SHMEM:
diff --git a/src/security/security_apparmor.c b/src/security/security_apparmor.c
index e6ecb513b1..5aeaf975a1 100644
--- a/src/security/security_apparmor.c
+++ b/src/security/security_apparmor.c
@@ -693,6 +693,7 @@ AppArmorSetMemoryLabel(virSecurityManagerPtr mgr,
         return reload_profile(mgr, def, mem->nvdimmPath, true);
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
         break;
     }
diff --git a/src/security/security_dac.c b/src/security/security_dac.c
index 00eeae0d27..5ae645f25b 100644
--- a/src/security/security_dac.c
+++ b/src/security/security_dac.c
@@ -1871,6 +1871,7 @@ virSecurityDACRestoreMemoryLabel(virSecurityManagerPtr mgr,
         break;
 
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
         ret = 0;
@@ -2054,6 +2055,7 @@ virSecurityDACSetMemoryLabel(virSecurityManagerPtr mgr,
         break;
 
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
         ret = 0;
diff --git a/src/security/security_selinux.c b/src/security/security_selinux.c
index 1d1d9edfff..c0a3b28044 100644
--- a/src/security/security_selinux.c
+++ b/src/security/security_selinux.c
@@ -1584,6 +1584,7 @@ virSecuritySELinuxSetMemoryLabel(virSecurityManagerPtr mgr,
 
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
         break;
     }
@@ -1611,6 +1612,7 @@ virSecuritySELinuxRestoreMemoryLabel(virSecurityManagerPtr mgr,
         break;
 
     case VIR_DOMAIN_MEMORY_MODEL_DIMM:
+    case VIR_DOMAIN_MEMORY_MODEL_VIRTIO_MEM:
     case VIR_DOMAIN_MEMORY_MODEL_NONE:
     case VIR_DOMAIN_MEMORY_MODEL_LAST:
         ret = 0;
diff --git a/tests/qemuxml2argvdata/memory-hotplug-virtio-mem.xml b/tests/qemuxml2argvdata/memory-hotplug-virtio-mem.xml
new file mode 100644
index 0000000000..eed9e35d0d
--- /dev/null
+++ b/tests/qemuxml2argvdata/memory-hotplug-virtio-mem.xml
@@ -0,0 +1,64 @@
+<domain type='kvm'>
+  <name>QEMUGuest1</name>
+  <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+  <maxMemory slots='16' unit='KiB'>1099511627776</maxMemory>
+  <memory unit='KiB'>8388608</memory>
+  <currentMemory unit='KiB'>8388608</currentMemory>
+  <vcpu placement='static' cpuset='0-1'>2</vcpu>
+  <os>
+    <type arch='x86_64' machine='pc'>hvm</type>
+    <boot dev='hd'/>
+  </os>
+  <cpu mode='custom' match='exact' check='none'>
+    <model fallback='forbid'>qemu64</model>
+    <topology sockets='2' dies='1' cores='1' threads='1'/>
+    <numa>
+      <cell id='0' cpus='0-1' memory='2095104' unit='KiB'/>
+    </numa>
+  </cpu>
+  <clock offset='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>destroy</on_crash>
+  <devices>
+    <emulator>/usr/bin/qemu-system-i386</emulator>
+    <disk type='block' device='disk'>
+      <driver name='qemu' type='raw'/>
+      <source dev='/dev/HostVG/QEMUGuest1'/>
+      <target dev='hda' bus='ide'/>
+      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+    </disk>
+    <controller type='ide' index='0'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
+    </controller>
+    <controller type='usb' index='0' model='piix3-uhci'>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
+    </controller>
+    <controller type='pci' index='0' model='pci-root'/>
+    <input type='mouse' bus='ps2'/>
+    <input type='keyboard' bus='ps2'/>
+    <memballoon model='none'/>
+    <memory model='virtio-mem'>
+      <target>
+        <size unit='KiB'>1048576</size>
+        <node>0</node>
+        <block unit='KiB'>2048</block>
+        <requested unit='KiB'>524288</requested>
+      </target>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
+    </memory>
+    <memory model='virtio-mem'>
+      <source>
+        <nodemask>1-3</nodemask>
+        <pagesize unit='KiB'>2048</pagesize>
+      </source>
+      <target>
+        <size unit='KiB'>2097152</size>
+        <node>0</node>
+        <block unit='KiB'>2048</block>
+        <requested unit='KiB'>1048576</requested>
+      </target>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
+    </memory>
+  </devices>
+</domain>
diff --git a/tests/qemuxml2xmloutdata/memory-hotplug-virtio-mem.x86_64-latest.xml b/tests/qemuxml2xmloutdata/memory-hotplug-virtio-mem.x86_64-latest.xml
new file mode 120000
index 0000000000..a9d298129c
--- /dev/null
+++ b/tests/qemuxml2xmloutdata/memory-hotplug-virtio-mem.x86_64-latest.xml
@@ -0,0 +1 @@
+../qemuxml2argvdata/memory-hotplug-virtio-mem.xml
\ No newline at end of file
diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c
index 5cd945f28f..3a77f8d6c0 100644
--- a/tests/qemuxml2xmltest.c
+++ b/tests/qemuxml2xmltest.c
@@ -1267,6 +1267,7 @@ mymain(void)
                  QEMU_CAPS_DEVICE_NVDIMM,
                  QEMU_CAPS_LAST);
     DO_TEST_CAPS_LATEST("memory-hotplug-virtio-pmem");
+    DO_TEST_CAPS_LATEST("memory-hotplug-virtio-mem");
 
     DO_TEST("net-udp", NONE);
 
-- 
2.26.2




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux