[libvirt PATCH] docs: kbase: add a page about debugging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Migrate the following wiki articles:
https://wiki.libvirt.org/page/DebugLogs
https://wiki.libvirt.org/page/Debugging

With the syntax changed to rST and rewrapped.

Signed-off-by: Ján Tomko <jtomko@xxxxxxxxxx>
---
I might've changed an article or two, too.
Or rather: the article 'the'.

 docs/kbase.html.in       |   3 +
 docs/kbase/debugging.rst | 303 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 306 insertions(+)
 create mode 100644 docs/kbase/debugging.rst

diff --git a/docs/kbase.html.in b/docs/kbase.html.in
index c586e0f676..1a50428805 100644
--- a/docs/kbase.html.in
+++ b/docs/kbase.html.in
@@ -36,6 +36,9 @@
 
         <dt><a href="kbase/virtiofs.html">Virtio-FS</a></dt>
         <dd>Share a filesystem between the guest and the host</dd>
+
+        <dt><a href="kbase/debugging.html">Debugging libvirt</a></dt>
+        <dd>How to capture debug logs and use a debugger on libvirt</dd>
       </dl>
     </div>
 
diff --git a/docs/kbase/debugging.rst b/docs/kbase/debugging.rst
new file mode 100644
index 0000000000..a9bc02aa55
--- /dev/null
+++ b/docs/kbase/debugging.rst
@@ -0,0 +1,303 @@
+=================
+Debugging libvirt
+=================
+
+.. contents::
+
+
+If you `report a bug <https://libvirt.org/bugs.html>`_ against libvirt, in most
+cases you will be asked to attach debug logs. These are bare text files which
+tracks transition between different states of libvirtd, what it has tried to
+achieve, etc. Because of client -- server schema used in libvirt, the logs can
+be either client or server too. Usually, it's server side that matters as
+nearly all interesting work takes place there. Moreover, libvirt catches stderr
+of all running domains. These can be useful as well.
+
+
+How to turn on debug logs for libvirt
+=====================================
+
+Persistent setting
+------------------
+
+The daemon configuration files location is dependent on the `connection URI
+<http://libvirt.org/uri.html>`_. For ``qemu:///system``:
+
+* open ``/etc/libvirt/libvirtd.conf`` in your favourite editor
+* find & replace, or set these variables::
+
+   # LEGACY SETTINGS PRIOR LIBVIRT 4.4.0 SEE BELOW! #
+   log_level = 1
+   log_filters="1:qemu 3:remote 4:event 3:util.json 3:rpc"
+   log_outputs="1:file:/var/log/libvirt/libvirtd.log"
+
+
+   # PREFERRED SETTINGS AFTER LIBVIRT 4.4.0 #
+   log_filters="3:remote 4:event 3:util.json 3:rpc 1:*"
+   log_outputs="1:file:/var/log/libvirt/libvirtd.log"
+
+* save and exit
+* restart libvirtd service::
+
+   systemctl restart libvirtd.service
+
+In the config variables above, we have set logging level to 1 (debug level),
+set some filters (to filter out noise), e.g. from rpc only warnings (=level 3)
+and above will be reported. The logs are saved into
+``/var/log/libvirt/libvirtd.log``. Since libvirt *4.4.0* log filters
+support shell globbing, therefore the usage of ``log_level`` is considered
+deprecated in favour of pure usage of ``log_filters``.
+
+In case you want to get the client logs, you need to set this environment variable::
+
+ export LIBVIRT_LOG_OUTPUTS="1:file:/tmp/libvirt_client.log"
+
+However, when you are using the session mode ``qemu:///session`` or you run the
+``libvirtd`` as unprivileged user you will find configuration file under
+``$XDG_CONFIG_HOME/libvirt/libvirt.conf``.
+
+
+Runtime setting
+---------------
+
+Debugging anomalies can be very painful, especially when trying to reproduce it
+after the daemon restarts, since the new session can make the anomaly
+"disappear". Therefore, it's possible to enable the debug logs during runtime
+using libvirt administration API. To use it conveniently, there's a ``virt-admin``
+client provided by the ``libvirt-admin`` package. Use the package manager provided
+by your distribution to install this package. Once you have it installed, run
+the following as root to see the set of log filters currently being active::
+
+   # virt-admin daemon-log-filters
+   Logging filters: 3:remote 4:util.json 4:rpc
+
+In order to change this set, run the same command as root, this time with your own set of filters::
+
+   ## LEGACY APPROACH ENUMERATING ALL THE DESIRED MODULES ##
+   # virt-admin daemon-log-filters "1:util 1:libvirt 1:storage 1:network 1:nodedev 1:qemu"
+
+   ## CURRENT APPROACH USING SHELL GLOBBING ##
+   # virt-admin daemon-log-filters "3:remote 4:util.json 4:rpc 1:*"
+
+Analogically, the same procedure can be performed with log outputs::
+
+   # virt-admin daemon-log-outputs
+   Logging outputs: 3:syslog:libvirtd
+   # virt-admin daemon-log-outputs "1:file:/var/log/libvirt/libvirtd.log"
+
+NOTE: It's always good practice to return the settings to the original state
+once you're finished debugging, just remember to save the original sets of
+filters and outputs and restore them at the end the same way as described
+above.
+
+
+Removing filters and outputs
+----------------------------
+
+It's also possible to remove all the filters and produce an enormous log file,
+but it is not recommended since some of libvirt's modules can produce a large
+amount of noise. However, should you really want to do this, you can specify an
+empty set of filters::
+
+   # virt-admin daemon-log-filters ""
+   Logging filters:
+
+The situation is a bit different with outputs, since libvirt always has to log
+somewhere and resetting the outputs to an empty set will restore the default
+setting which depends on the host configuration, ''journald'' in our case::
+
+   # virt-admin daemon-log-outputs
+   Logging outputs: 1:file:/var/log/libvirt/libvirtd.log
+   # virt-admin daemon-log-outputs ""
+   Logging outputs: 2:journald
+
+
+What to attach?
+---------------
+
+Now you should go and reproduce the bug. Once you're finished, attach:
+
+* ``/var/log/libvirt/libvirtd.log`` or whatever path you set for the daemon logs.
+* If the problem is related to a domain attach ``/var/log/libvirt/qemu/$dom.log``
+  then. Or substitute ``qemu`` with whatever hypervisor you are using.
+* If you are asked for client logs, ``/tmp/libvirt_client.log``.
+
+
+Using a debugger
+================
+
+When trying to figure out what libvirt does, debug logs might not always be
+enough.  And sometimes you might want to get some information from a user, but
+you do not want to waste both your and their time by explaining how to do stuff
+in gdb to, for example, get a backtrace.  Here are some useful tips that you
+might use.
+
+
+Prerequisites
+-------------
+
+In cases where you want to see details of what is happening, you need to have
+debugging symbols installed, at least for the package you are trying to debug.
+Although having debugging symbols for all dependent libraries is usually
+helpful as well. Usually ``gdb`` will tell you what you need to do in order to
+get the proper data to your machine when you run it with a binary.
+
+=== Example: ===
+
+Running this command on 32bit Fedora 29 tells us what to install in order to
+get the proper debugging symbols::
+
+   # gdb $(which libvirtd)
+   GNU gdb (GDB) Fedora 8.2-6.fc29
+   ...
+   Reading symbols from /usr/sbin/libvirtd...(no debugging symbols found)...done.
+   Missing separate debuginfos, use: dnf debuginfo-install libvirt-daemon-4.7.0-1.fc29.i686
+
+When the package is installed, we can break on main and run until then (gdb's
+command ``start`` is perfect for this)::
+
+   # gdb $(which libvirtd)
+   GNU gdb (GDB) Fedora 8.2-6.fc29
+   ...
+   Reading symbols from /usr/sbin/libvirtd...Reading symbols from /usr/lib/debug/usr/sbin/libvirtd-4.7.0-1.fc29.i386.debug...done.
+   done.
+   (gdb) start
+   Temporary breakpoint 1 at 0x18fc0: file remote/remote_daemon.c, line 1030.
+   Starting program: /usr/sbin/libvirtd
+   Missing separate debuginfos, use: dnf debuginfo-install glibc-2.28-26.fc29.i686
+   Missing separate debuginfo for /lib/libvirt-lxc.so.0
+   Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/4d/16496b686ec54ca4201bd769b04293f6c756b3.debug
+   Missing separate debuginfo for /lib/libvirt-qemu.so.0
+   Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/ea/91d5346bd3e265ffb12ae641ca93643443e6e7.debug
+   Missing separate debuginfo for /lib/libvirt.so.0
+   Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/02/af3a96fc6227ed5e3a447344bcbb672bde14ba.debug
+   ...
+   Temporary breakpoint 1, main (argc=1, argv=0xbffff614) at remote/remote_daemon.c:1030
+   1030    int main(int argc, char **argv) {
+   Missing separate debuginfos, use: dnf debuginfo-install audit-libs-3.0-0.5.20181218gitbdb72c0.fc29.i686 avahi-libs-0.7-16.fc29.i686 brotli-1.0.5-1.fc29.i686 cyrus-sasl-lib-2.1.27-0.3rc7.fc29.i686 dbus-libs-1.12.12-1.fc29.i686 device-mapper-libs-1.02.154-1.fc29.i686 gmp-6.1.2-9.fc29.i686 gnutls-3.6.6-1.fc29.i686 keyutils-libs-1.5.10-8.fc29.i686 krb5-libs-1.16.1-25.fc29.i686 libacl-2.2.53-2.fc29.i686 libattr-2.4.48-3.fc29.i686 libblkid-2.32.1-1.fc29.i686 libcap-2.25-12.fc29.i686 libcap-ng-0.7.9-5.fc29.i686 libcom_err-1.44.4-1.fc29.i686 libcurl-7.61.1-10.fc29.i686 libffi-3.1-18.fc29.i686 libgcrypt-1.8.4-1.fc29.i686 libidn2-2.1.1a-1.fc29.i686 libmount-2.32.1-1.fc29.i686 libnghttp2-1.34.0-1.fc29.i686 libnl3-3.4.0-6.fc29.i686 libpsl-0.20.2-5.fc29.i686 libselinux-2.8-6.fc29.i686 libsepol-2.8-3.fc29.i686 libssh-0.8.7-1.fc29.i686 libssh2-1.8.1-1.fc29.i686 libtirpc-1.1.4-2.rc2.fc29.i686 libunistring-0.9.10-4.fc29.i686 libuuid-2.32.1-1.fc29.i686 libwsman1-2.6.5-8.fc29.i686 libxcrypt-4.4.4-2
 .fc29.i686 libxml2-2.9.8-5.fc29.i686 lz4-libs-1.8.3-1.fc29.i686 numactl-libs-2.0.12-1.fc29.i686 openldap-2.4.46-10.fc29.i686 openssl-libs-1.1.1b-3.fc29.i686 p11-kit-0.23.15-2.fc29.i686 pcre2-10.32-8.fc29.i686 xz-libs-5.2.4-3.fc29.i686 yajl-2.1.0-11.fc29.i686 zlib-1.2.11-14.fc29.i686
+
+You might need to run the above commands for more complete output.  It is very
+dependent on the actually problem, whether you need this or not, but it will
+never hurt to actually have all the data installed.
+
+
+When libvirt hangs
+------------------
+
+When a process hangs, we usually ask for a backtrace.  To avoid problems with
+paging and so on, it is usually very helpful to just get a backtrace for one
+instance of the particular process.  For that you can use something like this::
+
+   # gdb -batch -p $(pidof libvirtd) -ex 't a a bt f'
+
+This command will attach to currently running libvirtd process and run ``t a a
+bt f``, which is short for ``thread apply all backtrace full``, feel free to
+combine with ``sudo`` for users.  If you are using this for virsh, or any other
+binary which might have multiple processes running, then make sure you supply
+the right pid for the ``-p`` option.  For more info, read below about how to
+automate gdb.
+
+
+When libvirt crashes
+--------------------
+
+Different distros have different mechanisms of catching and reporting crashes.
+The automated ones are usually enabled only for the packaged binaries, but that
+should be enough for users.  Developers will have their own way of doing things
+anyway.
+
+* **systemd-coredump** -- ``coredumpctl show`` shows all needed information
+  (even a backtrace) of the last crash, use ``coredumpctl ls`` to list all
+  crashes cordumpctl knows about.
+
+* **abrt** -- ``abrt-cli`` works similarly to the above (TBD: how to get the
+  backtrace using abrt-cli)
+
+* **setup your own** -- you can do one of these things:
+
+   * set the ulimit for the service (depends on your init system) and look for
+     the file that gets created
+   * set kernel.core_pattern using sysctl to a command (rather than a filename
+     template) that gets ran with each core dump.  This one does not need any
+     ulimit setting, but you need to know what to specify there.
+
+For more information see related documentation.
+
+
+Automating gdb
+--------------
+
+When you need more specific behaviour from gdb, you can automate that, but for
+multiline commands you need an input redirection or execute them from the file.
+
+
+Multiline example
+-----------------
+
+Simple example that will print backtrace when ``abort()`` is reached::
+
+   $ cat >/var/lib/libvirt/gdbabortscript <<EOF
+   start
+   break abort
+   commands
+   t a a bt full
+   end
+   continue
+   EOF
+
+This file instructs gdb to ``start`` the program (run until ``main()``), that
+will load all the libraries so that we can setup a breakpoint for (p[retty
+much) any existing function.  It then sets up a breakpoint for the ``abort()``
+function and immediately sets up a list of ``commands`` that will run when that
+breakpoint is hit (list of commands ends with ``end``).  After that it allows
+the process to ``continue`` its execution.
+
+
+Systemd example
+---------------
+
+Let's say you need to debug an issue which happens only when the daemon is run
+as a service as it does not happen when run manually.  Ideally you would
+connect to a running instance, but if the issue happens right after starting
+the daemon.  One option would be utilizing ``systemtap`` to add a ``sleep()``
+in one of the early functions (TBD: add an automated way of doing that or
+remove this tip if it's not worth it).  Another idea is to make the init system
+run the gdb command we need.
+
+In systemd world we can do this easily by overriding the ``ExecStart`` parameter::
+
+   # cat >/etc/systemd/system/libvirtd.service.d/override.conf <<EOF
+   [Service]
+   ExecStart=
+   ExecStart=/usr/bin/gdb --batch -x /var/lib/libvirt/gdbabortscript /usr/sbin/libvirtd $LIBVIRTD_ARGS
+   EOF
+
+Daemon needs to be reloaded to know about this file::
+
+  # systemctl daemon-reload
+
+We also need to make sure that the file we created will be readable by the
+service.  DAC should be fine, SELinux might get tricky.  By placing the file
+under ``/var/lib/libvirt`` this should be readable by both the init system and
+the libvirt daemon, but we need to make sure it has a proper context::
+
+  # restorecon -F /var/lib/libvirt/gdbabortscript /etc/systemd/system/libvirtd.service.d/override.conf
+
+We actually do not need this to be read by the init system, but gdb will most
+probably run under the same SELinux context as init, the context for libvirtd
+gets changed by a transition rule which depends on the current runnning context
+and the context of the binary being executed, so that whould apply only when
+libvirtd is being started.  This ''should'' work most of the time.  If it does
+not work for you, please figure out a way and add it here.
+
+Now we need to restart the daemon::
+
+  # systemctl restart libvirtd.service
+
+Beware, the command will not end until libvirtd itself ends as systemd is
+waiting for ``sd_notify()`` from gdb's PID, but that function is being called
+by libvirtd.
+
+You should get the full backtrace in the output of::
+
+   # journalctl -u libvirtd.service
-- 
2.25.1






[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux