----- "Matthias Bolte" <matthias.bolte@xxxxxxxxxxxxxx> wrote:
> 2010/1/12 <pspreadborough@xxxxxxxxxxx>:
> >
> > ----- pspreadborough@xxxxxxxxxxx wrote:
> >
> >> ----- "Matthias Bolte" <matthias.bolte@xxxxxxxxxxxxxx> wrote:
> >>
> >> > 2010/1/11 <pspreadborough@xxxxxxxxxxx>:
> >> > >
> >> > > ----- "Matthias Bolte" <matthias.bolte@xxxxxxxxxxxxxx> wrote:
> >> > >
> >> > >> 2010/1/10 <pspreadborough@xxxxxxxxxxx>:
> >> > >> >
> >> > >> > ----- "Matthias Bolte" <matthias.bolte@xxxxxxxxxxxxxx>
> wrote:
> >> > >> >
> >> > >> >> 2010/1/10 <pspreadborough@xxxxxxxxxxx>:
> >> > >> >> >
> >> > >> >> > Hello,
> >> > >> >> >
> >> > >> >> > I have been trying to use the domain event C code
> example
> >> but
> >> > >> >> > unfortunately it segfaults (signal 11) every time I run
> it:
> >> > >> >> >
> >> > >> >> > [root@Spring events-c]# ./event-test
> >> > >> >> > myEventAddHandleFunc:221: Add handle 5 1 0xf081a0
> 0x8f727f8
> >> > >> >> > myEventAddHandleFunc:221: Add handle 7 1 0xf09990
> 0x8f727f8
> >> > >> >> > myEventAddHandleFunc:221: Add handle 8 1 0xed7940
> 0x8f727f8
> >> > >> >> > myEventAddTimeoutFunc:251: Adding Timeout -1 0xedefa0
> >> > 0x8f727f8
> >> > >> >> > myEventAddHandleFunc:221: Add handle 11 1 0xed7940
> 0x8f727f8
> >> > >> >> > myEventAddTimeoutFunc:251: Adding Timeout -1 0xedefa0
> >> > 0x8f727f8
> >> > >> >> > main:322 :: Registering domain event cbs
> >> > >> >> > Segmentation fault (core dumped)
> >> > >> >> >
> >> > >> >> > Core was generated by
> >> > >> >> >
> >> > >> >>
> >> > >>
> >> >
> >>
> `/root/libvirt-0.7.5/examples/domain-events/events-c/.libs/lt-event-test'.
> >> > >> >> > Program terminated with signal 11, Segmentation fault.
> >> > >> >> > [New process 21806]
> >> > >> >> > [New process 21822]
> >> > >> >> > #0 remoteDomainEventQueueFlush (timer=-1,
> opaque=0x8f727f8)
> >> > at
> >> > >> >> > remote/remote_driver.c:8720
> >> > >> >> > 8720 tempQueue.count = priv->domainEvents->count;
> >> > >> >> > (gdb) bt
> >> > >> >> > #0 remoteDomainEventQueueFlush (timer=-1,
> opaque=0x8f727f8)
> >> > at
> >> > >> >> > remote/remote_driver.c:8720
> >> > >> >> > #1 0x080490d3 in main (argc=Cannot access memory at
> address
> >> > 0x1
> >> > >> >> > ) at event-test.c:347
> >> > >> >> >
> >> > >> >> > The stack looks corrupted so I'm doubtful that this trace
> if
> >> > of
> >> > >> much
> >> > >> >> value.
> >> > >> >> > I have built
> >> > >> >> > and installed libvirt-0.7.5 and it and it's tools seem to
> be
> >> > >> >> operating
> >> > >> >> > correctly.
> >> > >> >>
> >> > >> >> I tried the event-test with libvirt-0.7.5 and QEMU/Xen and
> >> both
> >> > >> are
> >> > >> >> working as expected. No segfaults.
> >> > >> >>
> >> > >> >> Could you inspect the values of priv and priv->domainEvents
> in
> >> > GDB
> >> > >> >> using 'p priv' to see if they are NULL and try to
> dereference
> >> > them
> >> > >> in
> >> > >> >> GDB using 'p *priv' to see if they point to valid memory
> >> areas?
> >> > >> >>
> >> > >> >> Yes the backtrace looks corrupted. If there is stack/heap
> >> > >> corruption
> >> > >> >> involved valgrind may reveal it, so try to run the
> event-test
> >> > in
> >> > >> >> valgrind and see if that gives any hints.
> >> > >> >>
> >> > >> >> You can also try the GIT version of libvirt. There was a
> >> > invalid
> >> > >> free
> >> > >> >> call (resulting in heap corruption) in the node device
> code
> >> > fixed
> >> > >> >> after the 0.7.5 release. But that should have no effect on
> the
> >> > >> >> event-test.
> >> > >> >>
> >> > >> >> Matthias
> >> > >> >
> >> > >> > Matthias,
> >> > >> >
> >> > >> > priv->domainEvents is NULL, here's the gdb output:
> >> > >>
> >> > >> This explains the segfault. The next question is, why is it
> NULL?
> >> > >>
> >> > >> > (gdb) p *priv
> >> > >> > $1 = {lock = {lock = {__data = {__lock = 1, __count = 0,
> >> __owner
> >> > =
> >> > >> 21806, __kind = 0, __nusers = 1, {__spins = 0, __list = {
> >> > >> > __next = 0x0}}}, __size =
> >> > >>
> >> >
> >>
> "\001\000\000\000\000\000\000\000.U\000\000\000\000\000\000\001\000\000\000\000\000\000",
> >> > >> > __align = 1}}, sock = 150469168, watch = 3, pid = 4,
> >> > uses_tls =
> >> > >> 1982791681, is_secure = 1815048801, session = 0x782f6269,
> >> > >>
> >> > >> Seeing uses_tls and is_secure being large numbers and knowing
> >> that
> >> > >> both are used as boolean values in the code and should have
> >> values
> >> > of
> >> > >> 0 or 1 make me think that priv points to already freed memory
> >> > here.
> >> > >>
> >> > >> > type = 0x2f646e65 <Address 0x2f646e65 out of bounds>,
> counter
> >> =
> >> > >> 1684956536, localUses = 1668248365,
> >> > >> > hostname = 0x74656b <Address 0x74656b out of bounds>,
> debugLog
> >> > =
> >> > >> 0x0, saslconn = 0x0, saslDecoded = 0x0, saslDecodedLength =
> 0,
> >> > >>
> >> > >> type and hostname are char pointers, but the seem to point
> into
> >> > >> nowhere, confirms that this is either freed memory or priv
> itself
> >> > got
> >> > >> overwritten due to heap corruption.
> >> > >>
> >> > >> > saslDecodedOffset = 0, saslEncoded = 0x0, saslEncodedLength
> =
> >> > 0,
> >> > >> saslEncodedOffset = 0,
> >> > >> > buffer = '\0' <repeats 68 times>,
> >> > >>
> >> >
> >>
> "n\000\000\000\001\000\000\000\000\000\000\000\001\000\000\000\000\000\000\000\001\000\000\000\001\000\000\000\000\000\000\000\001\000\000\000\bQ�\b����\030\034�\b\000\000\000\000�\033�\b\001\000\000\000\002\000\000\000�\033�\b\000\000\000\000\025|�\000\a",
> >> > >> '\0' <repeats 11 times>, "X\000�\b", '\0' <repeats 12 times>,
> >> > >> "\021\000\000\000\002\000\000\000P��\b\000\000\000\000\021",
> '\0'
> >> > >> <repeats 15 times>,
> >> > >>
> >> >
> >>
> "\021\000\000\0008\036�\b\f\000\000\000\020\000\000\000\021\000\000\000\a\000\000\000\b\000\000\000\t\000\000\000\021\000\000\000\002\000\000\000\230\034�\b\000\000\000\000A\000\000\000\003\000\000\000\001\000\000\000\001\000"...,
> >> > >> bufferLength = 0,
> >> > >> > bufferOffset = 0, callbackList = 0x0, domainEvents = 0x0,
> >> > >> eventFlushTimer = 0, domainEventDispatching = 1, wakeupSendFD
> =
> >> 0,
> >> > >> > wakeupReadFD = 0, waitDispatch = 0x0, streams = 0x0}
> >> > >> >
> >> > >> > I'll try a run with valgrind and post the results.
> >> > >> >
> >> > >> > Pete
> >> > >> >
> >> > >>
> >> > >> Could you test the Python version of this example found in
> >> > >> examples/domain-events/events-python/event-test.py? Does this
> >> > work?
> >> > >>
> >> > >> Otherwise lets see if valgrind gives any hints.
> >> > >>
> >> > >> Matthias
> >> > >
> >> > >
> >> > > During initialization I notice that the myEventAddHandleFunc()
> >> > method is
> >> > > called multiple times, each time with a different fd value
> (5,7,8
> >> > and 11).
> >> > > The way the code is written only the last fd value is recorded
> and
> >> > then
> >> > > used in the poll() call. Is this the intended? if so why are
> the
> >> > preceding
> >> > > fds ignored?
> >> > >
> >> > > myEventAddHandleFunc:223: Add handle 5 1 0xf13480 0x97b97d8
> >> > > myEventAddHandleFunc:223: Add handle 7 1 0xf14c70 0x97b97d8
> >> > > Allocating domainEvents:0x97c6b10
> >> > > myEventAddHandleFunc:223: Add handle 8 1 0xee2940 0x97b97d8
> >> > > myEventAddTimeoutFunc:260: Adding Timeout -1 0xee9fc0
> 0x97b97d8
> >> > > Allocating domainEvents:0x97c5780
> >> > > myEventAddHandleFunc:223: Add handle 11 1 0xee2940 0x97b97d8
> >> > > myEventAddTimeoutFunc:260: Adding Timeout -1 0xee9fc0
> 0x97b97d8
> >> > > main:333 :: Registering domain event cbs
> >> > >
> >> > >
> >> > > Regards,
> >> > >
> >> > > Pete
> >> > >
> >> >
> >> > That's strange. I can't reproduce this neither. I always get
> exactly
> >> > one call to myEventAddHandleFunc:
> >> >
> >> > myEventAddHandleFunc:221: Add handle 3 1 0x7ff116f68b00
> 0x1d97f00
> >> > myEventAddTimeoutFunc:251: Adding Timeout -1 0x7ff116f68750
> >> 0x1d97f00
> >> > main:322 :: Registering domain event cbs
> >> > myEventUpdateHandleFunc:232: Updated Handle 0 0
> >> > myEventUpdateHandleFunc:232: Updated Handle 0 1
> >> >
> >> > You could try to run the event-test in GDB and set a breakpoint
> on
> >> > myEventAddHandleFunc to see where 4 additional calls to
> >> > myEventAddHandleFunc come from.
> >> >
> >> > In my case I get this backtrace when setting a breakpoint on
> >> > myEventAddHandleFunc:
> >> >
> >> > (gdb) bt
> >> > #0 myEventAddHandleFunc (fd=6, event=1, cb=0x7f1be6ec3b00
> >> > <remoteDomainEventFired>, opaque=0xc68f00, ff=0) at
> event-test.c:220
> >> > #1 0x00007f1be6ecbaaf in doRemoteOpen (conn=0xc68f00,
> >> > priv=0x7f1be7350010, auth=0x0, flags=0) at
> >> remote/remote_driver.c:893
> >> > #2 0x00007f1be6ece053 in remoteOpen (conn=0xc68f00, auth=0x0,
> >> > flags=13007744) at remote/remote_driver.c:1076
> >> > #3 0x00007f1be6eb155d in do_open (name=0x7fff48400968
> >> > "qemu:///system", auth=0x0, flags=0) at libvirt.c:1117
> >> > #4 0x0000000000400eb3 in main (argc=<value optimized out>,
> >> > argv=<value optimized out>) at event-test.c:313
> >> >
> >> > Matthias
> >>
> >>
> >> Matthias
> >>
> >> Here are the four stack traces, one for each time
> >> myEventAddHandleFunc() was
> >> called.
> >>
> >> #0 myEventAddHandleFunc (fd=8, event=1, cb=0x85b480
> >> <xenStoreWatchEvent>, opaque=0x824a7d8, ff=0) at event-test.c:223
> >> #1 0x007ccf55 in virEventAddHandle (fd=8, events=1, cb=0x85b480
> >> <xenStoreWatchEvent>, opaque=0x824a7d8, ff=0)
> >> at util/event.c:45
> >> #2 0x0085b291 in xenStoreOpen (conn=0x824a7d8, auth=0x0,
> flags=<value
> >> optimized out>) at xen/xs_internal.c:339
> >> #3 0x00844287 in xenUnifiedOpen (conn=0x824a7d8, auth=0x0,
> flags=0)
> >> at xen/xen_driver.c:352
> >> #4 0x00811d05 in do_open (name=0xbf8c49d4 "xen:///", auth=0x0,
> >> flags=0) at libvirt.c:1117
> >> #5 0x08048e92 in main (argc=Cannot access memory at address 0x2
> >> ) at event-test.c:325
> >> (gdb) c
> >> Continuing.
> >> (gdb) b
> >> Note: breakpoint 1 also set at pc 0x8048bc9.
> >> Breakpoint 2 at 0x8048bc9: file event-test.c, line 223.
> >> (gdb) bt
> >> #0 myEventAddHandleFunc (fd=10, event=1, cb=0x85cc70
> >> <xenInotifyEvent>, opaque=0x824a7d8, ff=0) at event-test.c:223
> >> #1 0x007ccf55 in virEventAddHandle (fd=10, events=1, cb=0x85cc70
> >> <xenInotifyEvent>, opaque=0x824a7d8, ff=0) at util/event.c:45
> >> #2 0x0085c827 in xenInotifyOpen (conn=0x824a7d8, auth=0x0,
> flags=0)
> >> at xen/xen_inotify.c:460
> >> #3 0x008444f1 in xenUnifiedOpen (conn=0x824a7d8, auth=0x0,
> flags=0)
> >> at xen/xen_driver.c:391
> >> #4 0x00811d05 in do_open (name=0xbf8c49d4 "xen:///", auth=0x0,
> >> flags=0) at libvirt.c:1117
> >> #5 0x08048e92 in main (argc=Cannot access memory at address 0x1
> >> ) at event-test.c:325
> >> (gdb) c
> >> Continuing.
> >> (gdb) bt
> >> #0 myEventAddHandleFunc (fd=11, event=1, cb=0x82a940
> >> <remoteDomainEventFired>, opaque=0x824a7d8, ff=0) at
> event-test.c:223
> >> #1 0x007ccf55 in virEventAddHandle (fd=11, events=1, cb=0x82a940
> >> <remoteDomainEventFired>, opaque=0x824a7d8, ff=0)
> >> at util/event.c:45
> >> #2 0x0082c478 in doRemoteOpen (conn=0x824a7d8, priv=0xb7534008,
> >> auth=0x0, flags=0) at remote/remote_driver.c:894
> >> #3 0x00830448 in remoteOpenSecondaryDriver (conn=0x824a7d8,
> auth=0x0,
> >> flags=0, priv=0xbf8c2668) at remote/remote_driver.c:1006
> >> #4 0x0083082a in remoteNetworkOpen (conn=0x824a7d8, auth=0x0,
> >> flags=0) at remote/remote_driver.c:3549
> >> #5 0x00811e2f in do_open (name=0xbf8c49d4 "xen:///", auth=0x0,
> >> flags=0) at libvirt.c:1137
> >> #6 0x08048e92 in main (argc=1, argv=0xbf8c28b4) at
> event-test.c:325
> >> (gdb) c
> >> Continuing.
> >> (gdb) bt
> >> #0 myEventAddHandleFunc (fd=14, event=1, cb=0x82a940
> >> <remoteDomainEventFired>, opaque=0x824a7d8, ff=0) at
> event-test.c:223
> >> #1 0x007ccf55 in virEventAddHandle (fd=14, events=1, cb=0x82a940
> >> <remoteDomainEventFired>, opaque=0x824a7d8, ff=0)
> >> at util/event.c:45
> >> #2 0x0082c478 in doRemoteOpen (conn=0x824a7d8, priv=0x8258ab0,
> >> auth=0x0, flags=0) at remote/remote_driver.c:894
> >> #3 0x00830448 in remoteOpenSecondaryDriver (conn=0x824a7d8,
> auth=0x0,
> >> flags=0, priv=0xbf8c2668) at remote/remote_driver.c:1006
> >> #4 0x0083078a in remoteInterfaceOpen (conn=0x824a7d8, auth=0x0,
> >> flags=0) at remote/remote_driver.c:4104
> >> #5 0x00811f4e in do_open (name=0xbf8c49d4 "xen:///", auth=0x0,
> >> flags=0) at libvirt.c:1156
> >> #6 0x08048e92 in main (argc=1, argv=0xbf8c28b4) at
> event-test.c:325
> >>
> >> Regards,
> >>
> >> Pete
> >>
> >>
> >> --
> >> Libvir-list mailing list
> >> Libvir-list@xxxxxxxxxx
> >> https://www.redhat.com/mailman/listinfo/libvir-list
> >
> > Matthias,
> >
> > Using the UIR xen+unix:/// works! I'm curious to know why when
> > using the UIR xen:/// multiple myEventAddHandleFunc() calls
> occurred.
> > Are there and fields I could use to identify and ignore
> > the spurious calls?
> >
> > I'd like to use the event monitoring for several remote Xen hosts.
> > I assume I'll have to modify the code to connect remotely to each
> > host and hope for just one myEventAddHandleFunc() call per host.
> >
> > Thanks for your assistance it's much apprecied,
> >
> > Regards,
> >
> > Pete
> >
> >
>
> Ah you are using the event-test from within a dom0. If I do that I
> can
> reproduce the segfault. And I also understand why the Python version
> works.
>
> The C version is basically build to handle a single call to
> myEventAddHandleFunc. This works with xen+unix:/// because then the
> remote driver is involved and only one event handle is added by the
> remote driver. With xen:/// several Xen subdrivers register event
> handles and myEventAddHandleFunc will just overwrite the values
> stored
> from the previously added event handle. For some reason this results
> in the segfault you see. The Python version works because it handles
> multiple added handles properly.
>
> I tried to understand why this triggers a segfault, but no success
> yet.
>
> Matthias
Matthias,
Yes, I'm currently working within Dom0 although my project will
ultimately work remotely. Thank you for your assistance.
Regards,
Pete
--
Libvir-list mailing list
Libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list