Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@xxxxxxxxxx>
---
docs/formatdomain.html.in | 48 +++++++++++++----
docs/schemas/domaincommon.rng | 5 ++
src/conf/domain_conf.c | 51 +++++++++++++++----
src/conf/domain_conf.h | 1 +
.../net-eth-unmanaged-tap.xml | 35 +++++++++++++
.../net-eth-unmanaged-tap.xml | 40 +++++++++++++++
tests/qemuxml2xmltest.c | 1 +
7 files changed, 160 insertions(+), 21 deletions(-)
create mode 100644 tests/qemuxml2argvdata/net-eth-unmanaged-tap.xml
create mode 100644 tests/qemuxml2xmloutdata/net-eth-unmanaged-tap.xml
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index fcb7c59c00..86a5261e47 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -5511,24 +5511,52 @@
<h5><a id="elementsNICSEthernet">Generic ethernet connection</a></h5>
<p>
- Provides a means for the administrator to execute an arbitrary script
- to connect the guest's network to the LAN. The guest will have a tun
- device created with a name of vnetN, which can also be overridden with the
- <target> element. After creating the tun device a shell script will
- be run which is expected to do whatever host network integration is
- required. By default this script is called /etc/qemu-ifup but can be
- overridden.
+ Provides a means to use a new or existing tap device (or veth
+ device pair, depening on the needs of the hypervisor driver)
+ that is partially or wholly setup external to libvirt (either
+ prior to the guest starting, or while the guest is being started
+ via an optional script specified in the config).
+ </p>
+ <p>
+ The name of the tap device can optionally be specified with
+ the <code>dev</code> attribute of the
+ <code><target></code> element. If no target dev is
+ specified, libvirt will create a new standard tap device with a
+ name of the pattern "vnetN", where "N" is replaced with a
+ number. If a target dev is specified and that device doesn't
+ exist, then a new standard tap device will be created with the
+ exact dev name given. If the specified target dev does exist,
+ then that existing device will be used. Usually some basic setup
+ of the device is done by libvirt, including setting a MAC
+ address, and the IFF_UP flag, but if the <code>dev</code> is a
+ pre-existing device, and the <code>managed</code> attribute of
+ the <code>target</code> element is also set to "no" (the default
+ value is "yes"), even this basic setup will not be performed -
+ libvirt will simply pass the device on to the hypervisor with no
+ setup at all. <span class="since">Since 5.7.0</span> Using
+ managed='no' with a pre-created tap device is useful because
+ it permits a virtual machine managed by an unprivileged libvirtd
+ to have emulated network devices based on tap devices.
+ </p>
+ <p>
+ After creating/opening the tap device, an optional shell script
+ (given in the <code>path</code> attribute of
+ the <code><script></code> element) will be run; this can
+ be used to do whatever extra host network integration is
+ required.
</p>
<pre>
...
<devices>
- <interface type='ethernet'/>
- ...
<interface type='ethernet'>
- <target dev='vnet7'/>
<script path='/etc/qemu-ifup-mynet'/>
</interface>
+ ...
+ <interface type='ethernet'>
+ <target dev='mytap1' managed='no'/>
+ <model type='virtio'/>
+ </interface>
</devices>
...</pre>
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index c48f8c4f56..cae3be639e 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -2885,6 +2885,11 @@
<attribute name="dev">
<ref name="deviceName"/>
</attribute>
+ <optional>
+ <attribute name="managed">
+ <ref name="virYesNo"/>
+ </attribute>
+ </optional>
<empty/>
</element>
</optional>
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index f21731b5f6..d473853f0e 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -6107,6 +6107,14 @@ virDomainNetDefValidate(const virDomainNetDef *net)
virDomainNetTypeToString(net->type));
return -1;
}
+ if (net->managed_tap == VIR_TRISTATE_BOOL_NO &&
+ net->type != VIR_DOMAIN_NET_TYPE_ETHERNET) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("unmanaged target dev is not supported on "
+ "interfaces of type '%s'"),
+ virDomainNetTypeToString(net->type));
+ return -1;
+ }
return 0;
}
@@ -11416,6 +11424,7 @@ virDomainNetDefParseXML(virDomainXMLOptionPtr xmlopt,
VIR_AUTOFREE(char *) bridge = NULL;
VIR_AUTOFREE(char *) dev = NULL;
VIR_AUTOFREE(char *) ifname = NULL;
+ VIR_AUTOFREE(char *) managed_tap = NULL;
VIR_AUTOFREE(char *) ifname_guest = NULL;
VIR_AUTOFREE(char *) ifname_guest_actual = NULL;
VIR_AUTOFREE(char *) script = NULL;
@@ -11578,13 +11587,7 @@ virDomainNetDefParseXML(virDomainXMLOptionPtr xmlopt,
} else if (!ifname &&
virXMLNodeNameEqual(cur, "target")) {
ifname = virXMLPropString(cur, "dev");
- if (ifname &&
- (flags & VIR_DOMAIN_DEF_PARSE_INACTIVE) &&
- (STRPREFIX(ifname, VIR_NET_GENERATED_TAP_PREFIX) ||
- (prefix && STRPREFIX(ifname, prefix)))) {
- /* An auto-generated target name, blank it out */
- VIR_FREE(ifname);
- }
+ managed_tap = virXMLPropString(cur, "managed");
} else if ((!ifname_guest || !ifname_guest_actual) &&
virXMLNodeNameEqual(cur, "guest")) {
ifname_guest = virXMLPropString(cur, "dev");
@@ -11918,6 +11921,27 @@ virDomainNetDefParseXML(virDomainXMLOptionPtr xmlopt,
ctxt, &def->guestIP) < 0)
goto error;
+ if (managed_tap) {
+ if (STREQ(managed_tap, "no")) {
+ def->managed_tap = VIR_TRISTATE_BOOL_NO;
+ } else if (STREQ(managed_tap, "yes")) {
+ def->managed_tap = VIR_TRISTATE_BOOL_YES;
+ } else {
+ virReportError(VIR_ERR_XML_ERROR,
+ _("invalid 'managed' value '%s'"),
+ managed_tap);
+ goto error;
+ }
+ }
+
+ if (def->managed_tap != VIR_TRISTATE_BOOL_NO && ifname &&
+ (flags & VIR_DOMAIN_DEF_PARSE_INACTIVE) &&
+ (STRPREFIX(ifname, VIR_NET_GENERATED_TAP_PREFIX) ||
+ (prefix && STRPREFIX(ifname, prefix)))) {
+ /* An auto-generated target name, blank it out */
+ VIR_FREE(ifname);
+ }
+
if (script != NULL)
VIR_STEAL_PTR(def->script, script);
if (domain_name != NULL)
@@ -25527,16 +25551,21 @@ virDomainNetDefFormat(virBufferPtr buf,
virBufferEscapeString(buf, "<backenddomain name='%s'/>\n", def->domain_name);
if (def->ifname &&
- !((flags & VIR_DOMAIN_DEF_FORMAT_INACTIVE) &&
- (STRPREFIX(def->ifname, VIR_NET_GENERATED_TAP_PREFIX) ||
- (prefix && STRPREFIX(def->ifname, prefix))))) {
+ (def->managed_tap == VIR_TRISTATE_BOOL_NO ||
+ !((flags & VIR_DOMAIN_DEF_FORMAT_INACTIVE) &&
+ (STRPREFIX(def->ifname, VIR_NET_GENERATED_TAP_PREFIX) ||
+ (prefix && STRPREFIX(def->ifname, prefix)))))) {
/* Skip auto-generated target names for inactive config. */
virBufferEscapeString(&attrBuf, " dev='%s'", def->ifname);
}
+ if (def->managed_tap != VIR_TRISTATE_BOOL_ABSENT) {
+ virBufferAsprintf(&attrBuf, " managed='%s'",
+ virTristateBoolTypeToString(def->managed_tap));
+ }
if (virXMLFormatElement(buf, "target", &attrBuf, NULL) < 0)
return -1;
-
+
if (def->ifname_guest || def->ifname_guest_actual) {
virBufferAddLit(buf, "<guest");
/* Skip auto-generated target names for inactive config. */
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index 33cef5b75c..9be05514b0 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -1004,6 +1004,7 @@ struct _virDomainNetDef {
char *script;
char *domain_name; /* backend domain name */
char *ifname; /* interface name on the host (<target dev='x'/>) */
+ int managed_tap; /* enum virTristateBool - ABSENT == YES */
virNetDevIPInfo hostIP;
char *ifname_guest_actual;
char *ifname_guest;
diff --git a/tests/qemuxml2argvdata/net-eth-unmanaged-tap.xml b/tests/qemuxml2argvdata/net-eth-unmanaged-tap.xml
new file mode 100644
index 0000000000..7f5a0c217b
--- /dev/null
+++ b/tests/qemuxml2argvdata/net-eth-unmanaged-tap.xml
@@ -0,0 +1,35 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory unit='KiB'>219100</memory>
+ <currentMemory unit='KiB'>219100</currentMemory>
+ <vcpu placement='static'>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>destroy</on_crash>
+ <devices>
+ <emulator>/usr/bin/qemu-system-i686</emulator>
+ <disk type='block' device='disk'>
+ <driver name='qemu' type='raw'/>
+ <source dev='/dev/HostVG/QEMUGuest1'/>
+ <target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='usb' index='0'/>
+ <controller type='ide' index='0'/>
+ <controller type='pci' index='0' model='pci-root'/>
+ <interface type='ethernet'>
+ <mac address='fe:11:22:33:44:55'/>
+ <target dev='mytap0' managed='no'/>
+ <model type='virtio'/>
+ </interface>
+ <input type='mouse' bus='ps2'/>
+ <input type='keyboard' bus='ps2'/>
+ <memballoon model='none'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2xmloutdata/net-eth-unmanaged-tap.xml b/tests/qemuxml2xmloutdata/net-eth-unmanaged-tap.xml
new file mode 100644
index 0000000000..cdff179932
--- /dev/null
+++ b/tests/qemuxml2xmloutdata/net-eth-unmanaged-tap.xml
@@ -0,0 +1,40 @@
+<domain type='qemu'>
+ <name>QEMUGuest1</name>
+ <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
+ <memory unit='KiB'>219100</memory>
+ <currentMemory unit='KiB'>219100</currentMemory>
+ <vcpu placement='static'>1</vcpu>
+ <os>
+ <type arch='i686' machine='pc'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>destroy</on_crash>
+ <devices>
+ <emulator>/usr/bin/qemu-system-i686</emulator>
+ <disk type='block' device='disk'>
+ <driver name='qemu' type='raw'/>
+ <source dev='/dev/HostVG/QEMUGuest1'/>
+ <target dev='hda' bus='ide'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='usb' index='0'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
+ </controller>
+ <controller type='ide' index='0'>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
+ </controller>
+ <controller type='pci' index='0' model='pci-root'/>
+ <interface type='ethernet'>
+ <mac address='fe:11:22:33:44:55'/>
+ <target dev='mytap0' managed='no'/>
+ <model type='virtio'/>
+ <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
+ </interface>
+ <input type='mouse' bus='ps2'/>
+ <input type='keyboard' bus='ps2'/>
+ <memballoon model='none'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c
index 0ea4ae0342..a286d6a5e1 100644
--- a/tests/qemuxml2xmltest.c
+++ b/tests/qemuxml2xmltest.c
@@ -408,6 +408,7 @@ mymain(void)
DO_TEST("net-eth", NONE);
DO_TEST("net-eth-ifname", NONE);
DO_TEST("net-eth-hostip", NONE);
+ DO_TEST("net-eth-unmanaged-tap", NONE);
DO_TEST("net-virtio-network-portgroup", NONE);
DO_TEST("net-virtio-rxtxqueuesize", NONE);
DO_TEST("net-hostdev", NONE);
--
2.21.0
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
