The virtlxcd daemon will be responsible for providing the lxc API
driver functionality. The lxc driver is still loaded by the main
libvirtd daemon at this stage, so virtlxcd must not be running at
the same time.
Signed-off-by: Daniel P. Berrangé <berrange@xxxxxxxxxx>
---
.gitignore | 4 +++
libvirt.spec.in | 8 +++++
src/lxc/Makefile.inc.am | 62 +++++++++++++++++++++++++++++++++++++
src/lxc/virtlxcd.service.in | 24 ++++++++++++++
4 files changed, 98 insertions(+)
create mode 100644 src/lxc/virtlxcd.service.in
diff --git a/.gitignore b/.gitignore
index d23ffa94f0..d279c7bc1f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -160,6 +160,9 @@
/src/lxc/lxc_monitor_protocol.h
/src/lxc/lxc_protocol.[ch]
/src/lxc/test_libvirtd_lxc.aug
+/src/lxc/test_virtlxcd.aug
+/src/lxc/virtlxcd.aug
+/src/lxc/virtlxcd.conf
/src/network/test_virtnetworkd.aug
/src/network/virtnetworkd.aug
/src/network/virtnetworkd.conf
@@ -197,6 +200,7 @@
/src/virtxend
/src/virtlockd
/src/virtlogd
+/src/virtlxcd
/src/virtnetworkd
/src/virtnodedevd
/src/virtnwfilterd
diff --git a/libvirt.spec.in b/libvirt.spec.in
index 7d2597e3dd..e64c2931ac 100644
--- a/libvirt.spec.in
+++ b/libvirt.spec.in
@@ -1760,6 +1760,14 @@ exit 0
%if %{with_lxc}
%files daemon-driver-lxc
+%config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf
+%{_datadir}/augeas/lenses/virtlxcd.aug
+%{_datadir}/augeas/lenses/tests/test_virtlxcd.aug
+%{_unitdir}/virtlxcd.service
+%{_unitdir}/virtlxcd.socket
+%{_unitdir}/virtlxcd-ro.socket
+%{_unitdir}/virtlxcd-admin.socket
+%attr(0755, root, root) %{_sbindir}/virtlxcd
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
diff --git a/src/lxc/Makefile.inc.am b/src/lxc/Makefile.inc.am
index 0c241fc5c1..7c81761a81 100644
--- a/src/lxc/Makefile.inc.am
+++ b/src/lxc/Makefile.inc.am
@@ -110,6 +110,68 @@ endif WITH_BLKID
libvirt_driver_lxc_impl_la_LIBADD += $(SECDRIVER_LIBS)
libvirt_driver_lxc_impl_la_SOURCES = $(LXC_DRIVER_SOURCES)
+
+sbin_PROGRAMS += virtlxcd
+
+nodist_conf_DATA += lxc/virtlxcd.conf
+augeas_DATA += lxc/virtlxcd.aug
+augeastest_DATA += lxc/test_virtlxcd.aug
+CLEANFILES += lxc/virtlxcd.aug
+
+virtlxcd_SOURCES = $(REMOTE_DAEMON_SOURCES)
+virtlxcd_CFLAGS = \
+ $(REMOTE_DAEMON_CFLAGS) \
+ -DDAEMON_NAME="\"virtlxcd\"" \
+ -DMODULE_NAME="\"lxc\"" \
+ $(NULL)
+virtlxcd_LDFLAGS = $(REMOTE_DAEMON_LD_FLAGS)
+virtlxcd_LDADD = $(REMOTE_DAEMON_LD_ADD)
+
+SYSTEMD_UNIT_FILES += \
+ virtlxcd.service \
+ virtlxcd.socket \
+ virtlxcd-ro.socket \
+ virtlxcd-admin.socket \
+ $(NULL)
+SYSTEMD_UNIT_FILES_IN += \
+ lxc/virtlxcd.service.in \
+ $(NULL)
+
+VIRTLXCD_UNIT_VARS = \
+ $(VIRTD_UNIT_VARS) \
+ -e 's|[@]name[@]|Libvirt lxc|g' \
+ -e 's|[@]service[@]|virtlxcd|g' \
+ -e 's|[@]sockprefix[@]|virtlxcd|g' \
+ $(NULL)
+
+virtlxcd.service: lxc/virtlxcd.service.in $(top_builddir)/config.status
+ $(AM_V_GEN)sed $(VIRTLXCD_UNIT_VARS) < $< > $@-t && mv $@-t $@
+
+virtlxc%.socket: remote/libvirt%.socket.in $(top_builddir)/config.status
+ $(AM_V_GEN)sed $(VIRTLXCD_UNIT_VARS) < $< > $@-t && mv $@-t $@
+
+lxc/virtlxcd.conf: remote/libvirtd.conf.in
+ $(AM_V_GEN)sed \
+ -e '/:: CUT ENABLE_IP ::/,/:: END ::/d' \
+ -e 's/:: DAEMON_NAME ::/virtlxcd/' \
+ < $^ > $@
+
+lxc/virtlxcd.aug: remote/libvirtd.aug.in
+ $(AM_V_GEN)$(SED) \
+ -e '/:: CUT ENABLE_IP ::/,/:: END ::/d' \
+ -e 's/:: DAEMON_NAME ::/virtlxcd/' \
+ -e 's/:: DAEMON_NAME_UC ::/Virtlxcd/' \
+ $< > $@
+
+lxc/test_virtlxcd.aug: remote/test_libvirtd.aug.in \
+ lxc/virtlxcd.conf $(AUG_GENTEST)
+ $(AM_V_GEN)$(AUG_GENTEST) lxc/virtlxcd.conf \
+ $(srcdir)/remote/test_libvirtd.aug.in | \
+ $(SED) -e '/:: CUT ENABLE_IP ::/,/:: END ::/d' \
+ -e 's/:: DAEMON_NAME ::/virtlxcd/' \
+ -e 's/:: DAEMON_NAME_UC ::/Virtlxcd/' \
+ > $@ || rm -f $@
+
libexec_PROGRAMS += libvirt_lxc
libvirt_lxc_SOURCES = \
diff --git a/src/lxc/virtlxcd.service.in b/src/lxc/virtlxcd.service.in
new file mode 100644
index 0000000000..d06aa1480f
--- /dev/null
+++ b/src/lxc/virtlxcd.service.in
@@ -0,0 +1,24 @@
+[Unit]
+Description=Virtualization lxc daemon
+Conflicts=libvirtd.service
+Requires=virtlxcd.socket
+Requires=virtlxcd-ro.socket
+Requires=virtlxcd-admin.socket
+After=network.target
+After=dbus.service
+After=apparmor.service
+After=local-fs.target
+Documentation=man:libvirtd(8)
+Documentation=https://libvirt.org
+
+[Service]
+Type=notify
+ExecStart=@sbindir@/virtlxcd --timeout 120
+ExecReload=/bin/kill -HUP $MAINPID
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target
+Also=virtlxcd.socket
+Also=virtlxcd-ro.socket
+Also=virtlxcd-admin.socket
--
2.21.0
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
