Ian Woodstock wrote:
----- "Gerry Reno" <greno@xxxxxxxxxxx> wrote:
Gerry Reno wrote:
Gerry Reno wrote:
I'm using libvirt 0.6.2 on F11 x86_64 and CPU supports hw
virtualization. When I try to do 'virsh attach-interface ...' I get
an error that the function is not supported by the hypervisor device
type 'interface' cannot be attached. Is this command not supported?
Or is there something special I need to do? I found it in the man page.
I have a private network declared now, thank you Mark.
And here is how I am trying to attach an interface:
# cat PRIVBR0.xml
<network>
<name>PRIVBR0</name>
<bridge name='privbr0'/>
<ip address='172.19.0.1' netmask='255.255.0.0'>
</ip>
</network>
# virsh net-list --all
Name State Autostart
-----------------------------------------
PRIVBR0 active yes
default active no
# virsh attach-interface CC bridge privbr0
error: this function is not supported by the hypervisor: device type
'interface' cannot be attached
# grep emulator CC.xml
<emulator>/usr/bin/qemu-kvm</emulator>
I tried the 'attach-interface' both while the domain is running and
while shutdown. Neither works.
Can anyone see something wrong in what I'm doing here or the reason
that 'attach-interface' is failing?
-Gerry
I have also tried this as 'attach-device' with the same result:
# cat INTERFACE_PRIVBR0.xml
<interface type='bridge'>
<mac address='00:0c:01:41:50:01'/>
<source bridge='privbr0'/>
</interface>
# virsh attach-device CC INTERFACE_PRIVBR0.xml
error: Failed to attach device from INTERFACE_PRIVBR0.xml
error: this function is not supported by the hypervisor: device type
'interface' cannot be attached
I opened the following bug on this issue:
https://bugzilla.redhat.com/show_bug.cgi?id=537688
Hot adding nics to qemu was added in libvirt 0.7
So that means F12 and later would have NIC hotadd.
Ok, so does anyone know if libvirt 0.7.3 will be available as an
upgrade in F12? Ultimately that is what we're going to need.
-Gerry
--
Libvir-list mailing list
Libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list