On Tue, 23 Apr 2019 23:10:37 -0400 Yan Zhao <yan.y.zhao@xxxxxxxxx> wrote: > On Tue, Apr 23, 2019 at 05:59:32PM +0800, Cornelia Huck wrote: > > On Fri, 19 Apr 2019 04:35:04 -0400 > > Yan Zhao <yan.y.zhao@xxxxxxxxx> wrote: > > > > > device version attribute in mdev sysfs is used by user space software > > > (e.g. libvirt) to query device compatibility for live migration of VFIO > > > mdev devices. This attribute is mandatory if a mdev device supports live > > > migration. > > > > > > It consists of two parts: common part and vendor proprietary part. > > > common part: 32 bit. lower 16 bits is vendor id and higher 16 bits > > > identifies device type. e.g., for pci device, it is > > > "pci vendor id" | (VFIO_DEVICE_FLAGS_PCI << 16). > > > vendor proprietary part: this part is varied in length. vendor driver can > > > specify any string to identify a device. > > > > > > When reading this attribute, it should show device version string of the > > > device of type <type-id>. If a device does not support live migration, it > > > should return errno. > > > > It might make more sense if the driver does not register the attribute > > for the device in that case at all. > > > yes. what about rephrase like this: > " > When reading this attribute, it should show device version string of the > device of type <type-id>. > If a device does not support live migration, it has two choices: > 1. do not register this version attribute > 2. return -ENODEV on rw this version attribute "return -ENODEV when accessing the version attribute" ? > Choice 1 is preferred. > " > > > > > When writing a string to this attribute, it returns errno for > > > incompatibility or returns written string length in compatibility case. > > > If a device does not support live migration, it always returns errno. > > > > > > For user space software to use: > > > 1. > > > Before starting live migration, user space software first reads source side > > > mdev device's version. e.g. > > > "#cat \ > > > /sys/bus/pci/devices/0000\:00\:02.0/5ac1fb20-2bbf-4842-bb7e-36c58c3be9cd/mdev_type/version" > > > 00028086-193b-i915-GVTg_V5_4 > > > > > > 2. > > > Then, user space software writes the source side returned version string > > > to device version attribute in target side, and checks the return value. > > > If a negative errno is returned in the target side, then mdev devices in > > > source and target sides are not compatible; > > > If a positive number is returned and it equals to the length of written > > > string, then the two mdev devices in source and target side are compatible. > > > e.g. > > > (a) compatibility case > > > "# echo 00028086-193b-i915-GVTg_V5_4 > > > > /sys/bus/pci/devices/0000\:00\:02.0/882cc4da-dede-11e7-9180-078a62063ab1/mdev_type/version" > > > > > > (b) incompatibility case > > > "#echo 00028086-193b-i915-GVTg_V5_1 > > > > /sys/bus/pci/devices/0000\:00\:02.0/882cc4da-dede-11e7-9180-078a62063ab1/mdev_type/version" > > > -bash: echo: write error: Invalid argument > > > > > > 3. if two mdev devices are compatible, user space software can start > > > live migration, and vice versa. > > > > > > Note: if a mdev device does not support live migration, it either does > > > not provide a version attribute, or always returns errno when its version > > > attribute is read/written. > > > > > > Cc: Alex Williamson <alex.williamson@xxxxxxxxxx> > > > Cc: Erik Skultety <eskultet@xxxxxxxxxx> > > > Cc: "Dr. David Alan Gilbert" <dgilbert@xxxxxxxxxx> > > > Cc: Cornelia Huck <cohuck@xxxxxxxxxx> > > > Cc: "Tian, Kevin" <kevin.tian@xxxxxxxxx> > > > Cc: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx> > > > Cc: "Wang, Zhi A" <zhi.a.wang@xxxxxxxxx> > > > Cc: Neo Jia <cjia@xxxxxxxxxx> > > > Cc: Kirti Wankhede <kwankhede@xxxxxxxxxx> > > > > > > Signed-off-by: Yan Zhao <yan.y.zhao@xxxxxxxxx> > > > --- > > > Documentation/vfio-mediated-device.txt | 36 ++++++++++++++++++++++++++ > > > samples/vfio-mdev/mbochs.c | 17 ++++++++++++ > > > samples/vfio-mdev/mdpy.c | 16 ++++++++++++ > > > samples/vfio-mdev/mtty.c | 16 ++++++++++++ > > > 4 files changed, 85 insertions(+) > > > > > > diff --git a/Documentation/vfio-mediated-device.txt b/Documentation/vfio-mediated-device.txt > > > index c3f69bcaf96e..bc28471c0667 100644 > > > --- a/Documentation/vfio-mediated-device.txt > > > +++ b/Documentation/vfio-mediated-device.txt > > > @@ -202,6 +202,7 @@ Directories and files under the sysfs for Each Physical Device > > > | | |--- available_instances > > > | | |--- device_api > > > | | |--- description > > > + | | |--- version > > > | | |--- [devices] > > > | |--- [<type-id>] > > > | | |--- create > > > @@ -209,6 +210,7 @@ Directories and files under the sysfs for Each Physical Device > > > | | |--- available_instances > > > | | |--- device_api > > > | | |--- description > > > + | | |--- version > > > | | |--- [devices] > > > | |--- [<type-id>] > > > | |--- create > > > @@ -216,6 +218,7 @@ Directories and files under the sysfs for Each Physical Device > > > | |--- available_instances > > > | |--- device_api > > > | |--- description > > > + | |--- version > > > | |--- [devices] > > > > > > * [mdev_supported_types] > > > @@ -225,6 +228,8 @@ Directories and files under the sysfs for Each Physical Device > > > [<type-id>], device_api, and available_instances are mandatory attributes > > > that should be provided by vendor driver. > > > > > > + version is a mandatory attribute if a mdev device supports live migration. > > > > What about "An mdev device wishing to support live migration must > > provide the version attribute."? > yes, I just want to keep consistent with the line above it > " [<type-id>], device_api, and available_instances are mandatory attributes > that should be provided by vendor driver." > what about below one? > "version is a mandatory attribute if a mdev device wishing to support live > migration." My point is that an attribute is not mandatory if it can be left out :) (I'm not a native speaker, though; maybe this makes perfect sense after all?) Maybe "version is a required attribute if live migration is supported for an mdev device"? > > > > > + > > > * [<type-id>] > > > > > > The [<type-id>] name is created by adding the device driver string as a prefix > > > @@ -246,6 +251,35 @@ Directories and files under the sysfs for Each Physical Device > > > This attribute should show the number of devices of type <type-id> that can be > > > created. > > > > > > +* version > > > + > > > + This attribute is rw. It is used to check whether two devices are compatible > > > + for live migration. If this attribute is missing, then the corresponding mdev > > > + device is regarded as not supporting live migration. > > > + > > > + It consists of two parts: common part and vendor proprietary part. > > > + common part: 32 bit. lower 16 bits is vendor id and higher 16 bits identifies > > > + device type. e.g., for pci device, it is > > > + "pci vendor id" | (VFIO_DEVICE_FLAGS_PCI << 16). > > > + vendor proprietary part: this part is varied in length. vendor driver can > > > + specify any string to identify a device. > > > + > > > + When reading this attribute, it should show device version string of the device > > > + of type <type-id>. If a device does not support live migration, it should > > > + return errno. > > > + When writing a string to this attribute, it returns errno for incompatibility > > > + or returns written string length in compatibility case. If a device does not > > > + support live migration, it always returns errno. > > > > I'm not sure whether a device that does not support live migration > > should expose this attribute in the first place. Or is that to cover > > cases where a driver supports live migration only for some of the > > devices it supports? > yes, driver returning error code is to cover the cases where only part of devices it > supports can be migrated. > > > > Also, I'm not sure if a string that has to be parsed is a good idea... > > is this 'version' attribute supposed to convey some human-readable > > information as well? The procedure you describe for compatibility > > checking does the checking within the vendor driver which I would > > expect to have a table/rules for that anyway. > right. if a vendor driver has the confidence to migrate between devices of > diffent platform or mdev types, it can maintain a compatibility table for that > purpose. That's the reason why we would leave the compatibility check to vendor > driver. vendor driver can freely choose its own complicated way to decide > which device is migratable to which device. I think there are two scenarios here: - Migrating between different device types, which is unlikely to work, except in special cases. - Migrating between different versions of the same device type, which may work for some drivers/devices (and at least migrating to a newer version looks quite reasonable). But both should be something that is decided by the individual driver; I hope we don't want to support migration between different drivers :-O Can we make this a driver-defined format? > > > I think you should also specify which errno writing an incompatible id > > is supposed to return (probably best something different than if the > > device does not support live migration at all, if we stick with > > creating the attribute in that case.) > Agree. I'll define it clearly in next revison. Thanks! -- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list
