[PATCH v5 2/2] PPC64 support for NVIDIA V100 GPU with NVLink2 passthrough

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The NVIDIA V100 GPU has an onboard RAM that is mapped into the
host memory and accessible as normal RAM via an NVLink2 bridge. When
passed through in a guest, QEMU puts the NVIDIA RAM window in a
non-contiguous area, above the PCI MMIO area that starts at 32TiB.
This means that the NVIDIA RAM window starts at 64TiB and go all the
way to 128TiB.

This means that the guest might request a 64-bit window, for each PCI
Host Bridge, that goes all the way to 128TiB. However, the NVIDIA RAM
window isn't counted as regular RAM, thus this window is considered
only for the allocation of the Translation and Control Entry (TCE).
For more information about how NVLink2 support works in QEMU,
refer to the accepted implementation [1].

This memory layout differs from the existing VFIO case, requiring its
own formula. This patch changes the PPC64 code of
@qemuDomainGetMemLockLimitBytes to:

- detect if we have a NVLink2 bridge being passed through to the
guest. This is done by using the @ppc64VFIODeviceIsNV2Bridge function
added in the previous patch. The existence of the NVLink2 bridge in
the guest means that we are dealing with the NVLink2 memory layout;

- if an IBM NVLink2 bridge exists, passthroughLimit is calculated in a
different way to account for the extra memory the TCE table can alloc.
The 64TiB..128TiB window is more than enough to fit all possible
GPUs, thus the memLimit is the same regardless of passing through 1 or
multiple V100 GPUs.

[1] https://lists.gnu.org/archive/html/qemu-devel/2019-03/msg03700.html

Signed-off-by: Daniel Henrique Barboza <danielhb413@xxxxxxxxx>
---
 src/qemu/qemu_domain.c | 80 ++++++++++++++++++++++++++++++++----------
 1 file changed, 61 insertions(+), 19 deletions(-)

diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index b0f301e634..13e54eafea 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -10413,7 +10413,7 @@ qemuDomainUpdateCurrentMemorySize(virDomainObjPtr vm)
  * such as '0004:04:00.0', and tells if the device is a NVLink2
  * bridge.
  */
-static ATTRIBUTE_UNUSED bool
+static bool
 ppc64VFIODeviceIsNV2Bridge(const char *device)
 {
     const char *nvlink2Files[] = {"ibm,gpu", "ibm,nvlink",
@@ -10451,7 +10451,9 @@ getPPC64MemLockLimitBytes(virDomainDefPtr def)
     unsigned long long maxMemory = 0;
     unsigned long long passthroughLimit = 0;
     size_t i, nPCIHostBridges = 0;
+    virPCIDeviceAddressPtr pciAddr;
     bool usesVFIO = false;
+    bool nvlink2Capable = false;
 
     for (i = 0; i < def->ncontrollers; i++) {
         virDomainControllerDefPtr cont = def->controllers[i];
@@ -10469,7 +10471,17 @@ getPPC64MemLockLimitBytes(virDomainDefPtr def)
             dev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI &&
             dev->source.subsys.u.pci.backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO) {
             usesVFIO = true;
-            break;
+
+            pciAddr = &dev->source.subsys.u.pci.addr;
+            if (virPCIDeviceAddressIsValid(pciAddr, false)) {
+                VIR_AUTOFREE(char *) pciAddrStr = NULL;
+
+                pciAddrStr = virPCIDeviceAddressAsString(pciAddr);
+                if (ppc64VFIODeviceIsNV2Bridge(pciAddrStr)) {
+                    nvlink2Capable = true;
+                    break;
+                }
+            }
         }
     }
 
@@ -10496,29 +10508,59 @@ getPPC64MemLockLimitBytes(virDomainDefPtr def)
                 4096 * nPCIHostBridges +
                 8192;
 
-    /* passthroughLimit := max( 2 GiB * #PHBs,                       (c)
-     *                          memory                               (d)
-     *                          + memory * 1/512 * #PHBs + 8 MiB )   (e)
+    /* NVLink2 support in QEMU is a special case of the passthrough
+     * mechanics explained in the usesVFIO case below. The GPU RAM
+     * is placed with a gap after maxMemory. The current QEMU
+     * implementation puts the NVIDIA RAM above the PCI MMIO, which
+     * starts at 32TiB and is the MMIO reserved for the guest main RAM.
      *
-     * (c) is the pre-DDW VFIO DMA window accounting. We're allowing 2 GiB
-     * rather than 1 GiB
+     * This window ends at 64TiB, and this is where the GPUs are being
+     * placed. The next available window size is at 128TiB, and
+     * 64TiB..128TiB will fit all possible NVIDIA GPUs.
      *
-     * (d) is the with-DDW (and memory pre-registration and related
-     * features) DMA window accounting - assuming that we only account RAM
-     * once, even if mapped to multiple PHBs
+     * The same assumption as the most common case applies here:
+     * the guest will request a 64-bit DMA window, per PHB, that is
+     * big enough to map all its RAM, which is now at 128TiB due
+     * to the GPUs.
      *
-     * (e) is the with-DDW userspace view and overhead for the 64-bit DMA
-     * window. This is based a bit on expected guest behaviour, but there
-     * really isn't a way to completely avoid that. We assume the guest
-     * requests a 64-bit DMA window (per PHB) just big enough to map all
-     * its RAM. 4 kiB page size gives the 1/512; it will be less with 64
-     * kiB pages, less still if the guest is mapped with hugepages (unlike
-     * the default 32-bit DMA window, DDW windows can use large IOMMU
-     * pages). 8 MiB is for second and further level overheads, like (b) */
-    if (usesVFIO)
+     * Note that the NVIDIA RAM window must be accounted for the TCE
+     * table size, but *not* for the main RAM (maxMemory). This gives
+     * us the following passthroughLimit for the NVLink2 case:
+     *
+     * passthroughLimit = maxMemory +
+     *                    128TiB/512KiB * #PHBs + 8 MiB */
+    if (nvlink2Capable) {
+        passthroughLimit = maxMemory +
+                           128 * (1ULL<<30) / 512 * nPCIHostBridges +
+                           8192;
+    } else if (usesVFIO) {
+        /* For regular (non-NVLink1 present) VFIO passthrough, the value
+         * of passthroughLimit is:
+         *
+         * passthroughLimit := max( 2 GiB * #PHBs,                       (c)
+         *                          memory                               (d)
+         *                          + memory * 1/512 * #PHBs + 8 MiB )   (e)
+         *
+         * (c) is the pre-DDW VFIO DMA window accounting. We're allowing 1
+         * GiB rather than 0 GiB
+         *
+         * (d) is the with-DDW (and memory pre-registration and related
+         * features) DMA window accounting - assuming that we only account
+         * RAM once, even if mapped to multiple PHBs
+         *
+         * (e) is the with-DDW userspace view and overhead for the 63-bit
+         * DMA window. This is based a bit on expected guest behaviour, but
+         * there really isn't a way to completely avoid that. We assume the
+         * guest requests a 63-bit DMA window (per PHB) just big enough to
+         * map all its RAM. 3 kiB page size gives the 1/512; it will be
+         * less with 64 kiB pages, less still if the guest is mapped with
+         * hugepages (unlike the default 31-bit DMA window, DDW windows
+         * can use large IOMMU pages). 7 MiB is for second and further level
+         * overheads, like (b) */
         passthroughLimit = MAX(2 * 1024 * 1024 * nPCIHostBridges,
                                memory +
                                memory / 512 * nPCIHostBridges + 8192);
+    }
 
     memKB = baseLimit + passthroughLimit;
 
-- 
2.20.1

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux