Setup:
HOST: F11 x86_64
GUEST: F12beta x86_64
I have a number of guests setup on this host and all connect without a
problem with the 'br0' bridge on the host. I created a new guest and
loaded F12beta on it. I defined it to also use 'br0' networking but
this guest cannot ping anything on the LAN. All the other guests have
no problems communicating to addresses on the LAN.
Details:
### on HOST:
# brctl showmacs br0
port no mac addr is local? ageing timer
1 00:0b:82:11:bc:cb no 15.88
3 00:0c:01:30:50:00 no 16.37
2 00:0c:01:40:50:00 no 2.51
1 00:0c:29:e3:bc:ee no 0.49
1 00:18:f8:48:27:15 no 2.51
1 00:18:f8:9b:ba:b4 no 116.39
1 00:18:f8:9b:ba:b5 no 20.60
1 00:1a:4d:5e:f6:36 no 156.43
1 00:24:1d:19:05:cf yes 0.00
3 06:1d:1d:7a:31:9b yes 0.00
2 06:ba:11:dd:7b:08 yes 0.00
1 54:52:00:24:5e:cf no 28.93
# EXISTING GUEST: network interface in xml file:
<interface type='bridge'>
<mac address='00:0c:01:30:50:00'/>
<source bridge='br0'/>
<target dev='vnet0'/>
<model type='virtio'/>
</interface>
# NEW GUEST: network interface in xml file:
<interface type='bridge'>
<mac address='00:0c:01:40:50:00'/>
<source bridge='br0'/>
<target dev='vnet0'/>
<model type='virtio'/>
</interface>
### on EXISTING GUEST:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
HWADDR=00:0c:01:30:50:00
IPADDR=192.168.1.200
NETMASK=255.255.255.0
NETWORK=192.168.1.0
### on NEW GUEST:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
HWADDR=00:0c:01:40:50:00
IPADDR=192.168.1.210
NETMASK=255.255.255.0
GATEWAY=192.168.1.1
NETWORK=192.168.1.0
TYPE=Ethernet
IPV6INIT=no
USERCTL=no
### on EXISTING GUEST:
# ping 192.168.1.1
succeeds
### on NEW GUEST:
# ping 192.168.1.1
fails with Destination Host Unreachable
Is there something else I need to configure in F12beta to get this working?
-Gerry
--
Libvir-list mailing list
Libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list