Add <hostdev> protocol=vhost model handling for virtio transitional
devices. Ex:
<hostdev mode='subsystem' type='scsi_host' model='virtio-transitional'>
<source protocol='vhost' wwpn=X/>
</hostdev>
* "virtio-transitional" maps to qemu "vhost-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "vhost-scsi-pci-non-transitional"
Signed-off-by: Cole Robinson <crobinso@xxxxxxxxxx>
---
src/qemu/qemu_command.c | 10 +++++++++-
src/qemu/qemu_domain_address.c | 9 ++++++---
.../virtio-non-transitional.x86_64-3.1.0.args | 4 ++--
.../virtio-non-transitional.x86_64-latest.args | 4 ++--
.../virtio-transitional.x86_64-3.1.0.args | 3 +--
.../virtio-transitional.x86_64-latest.args | 5 ++---
tests/qemuxml2xmloutdata/virtio-transitional.xml | 7 +------
7 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 6ddfe2703c..eced41a98f 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -479,12 +479,20 @@ qemuBuildVirtioDevStr(virBufferPtr buf,
ntmodel_cap = QEMU_CAPS_DEVICE_VIRTIO_NET_PCI_NON_TRANSITIONAL;
break;
+ case VIR_DOMAIN_DEVICE_HOSTDEV:
+ if (device.data.hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST)
+ return 0;
+ has_tmodel = device.data.hostdev->source.subsys.u.scsi_host.model == VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO_TRANSITIONAL;
+ has_ntmodel = device.data.hostdev->source.subsys.u.scsi_host.model == VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO_NON_TRANSITIONAL;
+ tmodel_cap = QEMU_CAPS_DEVICE_VHOST_SCSI_PCI_TRANSITIONAL;
+ ntmodel_cap = QEMU_CAPS_DEVICE_VHOST_SCSI_PCI_NON_TRANSITIONAL;
+ break;
+
case VIR_DOMAIN_DEVICE_LEASE:
case VIR_DOMAIN_DEVICE_FS:
case VIR_DOMAIN_DEVICE_INPUT:
case VIR_DOMAIN_DEVICE_SOUND:
case VIR_DOMAIN_DEVICE_VIDEO:
- case VIR_DOMAIN_DEVICE_HOSTDEV:
case VIR_DOMAIN_DEVICE_WATCHDOG:
case VIR_DOMAIN_DEVICE_CONTROLLER:
case VIR_DOMAIN_DEVICE_GRAPHICS:
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 9f1a2dc9b8..993f33299f 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -785,11 +785,14 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
return pcieFlags;
/* according to pbonzini, from the guest PoV vhost-scsi devices
- * are the same as virtio-scsi, so they should use virtioFlags
- * (same as virtio-scsi) to determine Express vs. legacy placement
+ * are the same as virtio-scsi, so they should follow virtio logic
*/
- if (hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST)
+ if (hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) {
+ /* Transitional devices only work in conventional PCI slots */
+ if (hostdev->source.subsys.u.scsi_host.model == VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO_TRANSITIONAL)
+ return pciFlags;
return virtioFlags;
+ }
if (!(pciDev = virPCIDeviceNew(hostAddr->domain,
hostAddr->bus,
diff --git a/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args b/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args
index 9c38d713b2..500c03bdc3 100644
--- a/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args
+++ b/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args
@@ -34,8 +34,8 @@ addr=0x0,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-netdev user,id=hostnet0 \
-device virtio-net-pci,disable-legacy=on,disable-modern=off,netdev=hostnet0,\
id=net0,mac=00:11:22:33:44:55,bus=pci.1,addr=0x0 \
--device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
-bus=pci.3,addr=0x0 \
+-device vhost-scsi-pci,disable-legacy=on,disable-modern=off,\
+wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,bus=pci.3,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
-msg timestamp=on
diff --git a/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args b/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args
index 82255909c4..c8dbffda65 100644
--- a/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args
+++ b/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args
@@ -34,8 +34,8 @@ drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-netdev user,id=hostnet0 \
-device virtio-net-pci-non-transitional,netdev=hostnet0,id=net0,\
mac=00:11:22:33:44:55,bus=pci.1,addr=0x0 \
--device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
-bus=pci.3,addr=0x0 \
+-device vhost-scsi-pci-non-transitional,wwpn=naa.5123456789abcde0,vhostfd=3,\
+id=hostdev0,bus=pci.3,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
-msg timestamp=on
diff --git a/tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args b/tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args
index 4e991d6187..38a9e348b3 100644
--- a/tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args
+++ b/tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args
@@ -27,7 +27,6 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
addr=0x1 \
-device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
-device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
--device pcie-root-port,port=0xa,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x2 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-pci,scsi=off,bus=pci.2,addr=0x2,drive=drive-virtio-disk0,\
id=virtio-disk0,bootindex=1 \
@@ -35,7 +34,7 @@ id=virtio-disk0,bootindex=1 \
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,bus=pci.2,\
addr=0x1 \
-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
-bus=pci.3,addr=0x0 \
+bus=pci.2,addr=0x3 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
-msg timestamp=on
diff --git a/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args b/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args
index dab25ba2e8..ab2c35514d 100644
--- a/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args
+++ b/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args
@@ -27,15 +27,14 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
addr=0x1 \
-device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
-device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
--device pcie-root-port,port=0xa,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x2 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
-device virtio-blk-pci-transitional,scsi=off,bus=pci.2,addr=0x2,\
drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-netdev user,id=hostnet0 \
-device virtio-net-pci-transitional,netdev=hostnet0,id=net0,\
mac=00:11:22:33:44:55,bus=pci.2,addr=0x1 \
--device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
-bus=pci.3,addr=0x0 \
+-device vhost-scsi-pci-transitional,wwpn=naa.5123456789abcde0,vhostfd=3,\
+id=hostdev0,bus=pci.2,addr=0x3 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
-msg timestamp=on
diff --git a/tests/qemuxml2xmloutdata/virtio-transitional.xml b/tests/qemuxml2xmloutdata/virtio-transitional.xml
index ce7b109845..8c1baced0e 100644
--- a/tests/qemuxml2xmloutdata/virtio-transitional.xml
+++ b/tests/qemuxml2xmloutdata/virtio-transitional.xml
@@ -39,11 +39,6 @@
<target chassis='3' port='0x9'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
- <controller type='pci' index='4' model='pcie-root-port'>
- <model name='pcie-root-port'/>
- <target chassis='4' port='0xa'/>
- <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
- </controller>
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio-transitional'/>
@@ -53,7 +48,7 @@
<input type='keyboard' bus='ps2'/>
<hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-transitional'>
<source protocol='vhost' wwpn='naa.5123456789abcde0'/>
- <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
+ <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0'/>
</hostdev>
<memballoon model='none'/>
</devices>
--
2.20.1
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
