From: ZhiPeng Lu <luzhipeng@xxxxxxxxxx>
This patch adds functionality to allow libvirt to configure the 'dot1q-tunnel'
modes(802.1ad double-tagged) on openvswitch networks.
For example:
<interface type='bridge'>
<mac address='2c:da:41:1d:05:42'/>
<source bridge='ovs0'/>
<vlan>
<tag id='41' nativeMode='dot1q-tunnel'/>
</vlan>
<virtualport type='openvswitch'>
<parameters interfaceid='6401a152-0b99-40b5-92be-858810aa6d37'/>
</virtualport>
<model type='virtio'/>
<driver name='vhost'/>
<alias name='net0'/>
</interface>
Signed-off-by: ZhiPeng Lu <luzhipeng@xxxxxxxxxx>
---
v1->v2:
1. Fix "make syntax-check" failure
v2->v3:
1. remove other_config when updating vlan
v3->v4:
1. add commit message that has a brief description of the new
feature
2. add tests for 'dot1q-tunnel' vlan mode
docs/formatdomain.html.in | 20 ++++++++++++++------
docs/formatnetwork.html.in | 20 +++++++++++---------
docs/schemas/networkcommon.rng | 1 +
src/conf/netdev_vlan_conf.c | 2 +-
src/util/virnetdevopenvswitch.c | 7 +++++++
src/util/virnetdevvlan.h | 1 +
tests/networkxml2xmlin/openvswitch-net.xml | 9 +++++++++
tests/networkxml2xmlout/openvswitch-net.xml | 9 +++++++++
.../openvswitch-net-modified.xml | 9 +++++++++
.../openvswitch-net-more-portgroups.xml | 9 +++++++++
.../openvswitch-net-without-alice.xml | 9 +++++++++
11 files changed, 80 insertions(+), 16 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 84259c4..ced21c0 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -6085,8 +6085,14 @@ qemu-kvm -net nic,model=? /dev/null
<b><tag id='42'/></b>
<b><tag id='123' nativeMode='untagged'/></b>
<b></vlan></b>
- ...
</interface>
+ <interface type='bridge'>
+ <b><vlan trunk='yes'></b>
+ <b><tag id='42'/></b>
+ <b><tag id='123' nativeMode='dot1q-tunnel'/></b>
+ <b></vlan></b>
+ </interface>
+...
</devices>
...</pre>
@@ -6122,11 +6128,13 @@ qemu-kvm -net nic,model=? /dev/null
</p>
<p>
For network connections using Open vSwitch it is also possible
- to configure 'native-tagged' and 'native-untagged' VLAN modes
- <span class="since">Since 1.1.0.</span> This is done with the
- optional <code>nativeMode</code> attribute on
- the <code><tag></code> subelement: <code>nativeMode</code>
- may be set to 'tagged' or 'untagged'. The <code>id</code>
+ to configure 'native-tagged' and 'native-untagged'
+ <span class="since">Since 1.1.0.</span> and 'dot1q-tunnel'
+ (802.1ad double-tagged) <span class="since">Since 5.0.0.</span>
+ VLAN modes This is done with the optional <code>nativeMode</code>
+ attribute on the <code><tag></code> subelement:
+ <code>nativeMode</code> may be set to 'tagged' or 'untagged' or
+ 'dot1q-tunnel'. The <code>id</code>
attribute of the <code><tag></code> subelement
containing <code>nativeMode</code> sets which VLAN is considered
to be the "native" VLAN for this interface, and
diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in
index 363a72b..d9ac9f7 100644
--- a/docs/formatnetwork.html.in
+++ b/docs/formatnetwork.html.in
@@ -688,16 +688,18 @@
</p>
<p>
For network connections using Open vSwitch it is also possible
- to configure 'native-tagged' and 'native-untagged' VLAN modes
- <span class="since">Since 1.1.0.</span> This is done with the
- optional <code>nativeMode</code> attribute on
- the <code><tag></code> subelement: <code>nativeMode</code>
- may be set to 'tagged' or 'untagged'. The <code>id</code>
- attribute of the <code><tag></code> subelement
- containing <code>nativeMode</code> sets which VLAN is considered
- to be the "native" VLAN for this interface, and
+ to configure 'native-tagged' and 'native-untagged'
+ <span class="since">Since 1.1.0.</span>
+ and 'dot1q-tunnel'(802.1ad double-tagged) VLAN modes.
+ <span class="since">Since 5.0.0.</span> This is done with the
+ optional <code>nativeMode</code> attribute on the
+ <code><tag></code> subelement: <code>nativeMode</code>
+ may be set to 'tagged' or 'untagged' or 'dot1q-tunnel'.
+ The <code>id</code> attribute of the <code><tag></code>
+ subelement containing <code>nativeMode</code> sets which VLAN is
+ considered to be the "native" VLAN for this interface, and
the <code>nativeMode</code> attribute determines whether or not
- traffic for that VLAN will be tagged.
+ traffic for that VLAN will be tagged or QinQ.
</p>
<p>
<code><vlan></code> elements can also be specified in
diff --git a/docs/schemas/networkcommon.rng b/docs/schemas/networkcommon.rng
index 2699555..11c48ff 100644
--- a/docs/schemas/networkcommon.rng
+++ b/docs/schemas/networkcommon.rng
@@ -223,6 +223,7 @@
<choice>
<value>tagged</value>
<value>untagged</value>
+ <value>dot1q-tunnel</value>
</choice>
</attribute>
</optional>
diff --git a/src/conf/netdev_vlan_conf.c b/src/conf/netdev_vlan_conf.c
index dff49c6..79710d9 100644
--- a/src/conf/netdev_vlan_conf.c
+++ b/src/conf/netdev_vlan_conf.c
@@ -29,7 +29,7 @@
#define VIR_FROM_THIS VIR_FROM_NONE
VIR_ENUM_IMPL(virNativeVlanMode, VIR_NATIVE_VLAN_MODE_LAST,
- "default", "tagged", "untagged")
+ "default", "tagged", "untagged", "dot1q-tunnel")
int
virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr ctxt, virNetDevVlanPtr def)
diff --git a/src/util/virnetdevopenvswitch.c b/src/util/virnetdevopenvswitch.c
index 8fe06fd..2cc576f 100644
--- a/src/util/virnetdevopenvswitch.c
+++ b/src/util/virnetdevopenvswitch.c
@@ -91,6 +91,11 @@ virNetDevOpenvswitchConstructVlans(virCommandPtr cmd, virNetDevVlanPtr virtVlan)
virCommandAddArg(cmd, "vlan_mode=native-untagged");
virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
break;
+ case VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL:
+ virCommandAddArg(cmd, "vlan_mode=dot1q-tunnel");
+ virCommandAddArg(cmd, "other_config:qinq-ethtype=802.1q");
+ virCommandAddArgFormat(cmd, "tag=%d", virtVlan->nativeTag);
+ break;
case VIR_NATIVE_VLAN_MODE_DEFAULT:
default:
break;
@@ -504,6 +509,8 @@ int virNetDevOpenvswitchUpdateVlan(const char *ifname,
"--", "--if-exists", "clear", "Port", ifname, "tag",
"--", "--if-exists", "clear", "Port", ifname, "trunk",
"--", "--if-exists", "clear", "Port", ifname, "vlan_mode",
+ "--", "--if-exists", "remove", "Port", ifname, "other_config",
+ "qinq-ethtype",
"--", "--if-exists", "set", "Port", ifname, NULL);
if (virNetDevOpenvswitchConstructVlans(cmd, virtVlan) < 0)
diff --git a/src/util/virnetdevvlan.h b/src/util/virnetdevvlan.h
index be85f59..0667f9d 100644
--- a/src/util/virnetdevvlan.h
+++ b/src/util/virnetdevvlan.h
@@ -29,6 +29,7 @@ typedef enum {
VIR_NATIVE_VLAN_MODE_DEFAULT = 0,
VIR_NATIVE_VLAN_MODE_TAGGED,
VIR_NATIVE_VLAN_MODE_UNTAGGED,
+ VIR_NATIVE_VLAN_MODE_DOT1Q_TUNNEL,
VIR_NATIVE_VLAN_MODE_LAST
} virNativeVlanMode;
diff --git a/tests/networkxml2xmlin/openvswitch-net.xml b/tests/networkxml2xmlin/openvswitch-net.xml
index 2f6084d..0952859 100644
--- a/tests/networkxml2xmlin/openvswitch-net.xml
+++ b/tests/networkxml2xmlin/openvswitch-net.xml
@@ -30,4 +30,13 @@
<parameters profileid='native-profile'/>
</virtualport>
</portgroup>
+ <portgroup name='8021ad'>
+ <vlan trunk='yes'>
+ <tag id='555' nativeMode='dot1q-tunnel'/>
+ <tag id='666'/>
+ </vlan>
+ <virtualport>
+ <parameters profileid='8021ad-profile'/>
+ </virtualport>
+ </portgroup>
</network>
diff --git a/tests/networkxml2xmlout/openvswitch-net.xml b/tests/networkxml2xmlout/openvswitch-net.xml
index 2f6084d..0952859 100644
--- a/tests/networkxml2xmlout/openvswitch-net.xml
+++ b/tests/networkxml2xmlout/openvswitch-net.xml
@@ -30,4 +30,13 @@
<parameters profileid='native-profile'/>
</virtualport>
</portgroup>
+ <portgroup name='8021ad'>
+ <vlan trunk='yes'>
+ <tag id='555' nativeMode='dot1q-tunnel'/>
+ <tag id='666'/>
+ </vlan>
+ <virtualport>
+ <parameters profileid='8021ad-profile'/>
+ </virtualport>
+ </portgroup>
</network>
diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml b/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml
index cc0c344..e5794fc 100644
--- a/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml
+++ b/tests/networkxml2xmlupdateout/openvswitch-net-modified.xml
@@ -30,4 +30,13 @@
<parameters profileid='native-profile'/>
</virtualport>
</portgroup>
+ <portgroup name='8021ad'>
+ <vlan trunk='yes'>
+ <tag id='555' nativeMode='dot1q-tunnel'/>
+ <tag id='666'/>
+ </vlan>
+ <virtualport>
+ <parameters profileid='8021ad-profile'/>
+ </virtualport>
+ </portgroup>
</network>
diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml b/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml
index 7c19ad9..3df0b96 100644
--- a/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml
+++ b/tests/networkxml2xmlupdateout/openvswitch-net-more-portgroups.xml
@@ -41,4 +41,13 @@
<parameters profileid='native-profile'/>
</virtualport>
</portgroup>
+ <portgroup name='8021ad'>
+ <vlan trunk='yes'>
+ <tag id='555' nativeMode='dot1q-tunnel'/>
+ <tag id='666'/>
+ </vlan>
+ <virtualport>
+ <parameters profileid='8021ad-profile'/>
+ </virtualport>
+ </portgroup>
</network>
diff --git a/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml b/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml
index 4104424..38846aa 100644
--- a/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml
+++ b/tests/networkxml2xmlupdateout/openvswitch-net-without-alice.xml
@@ -20,4 +20,13 @@
<parameters profileid='native-profile'/>
</virtualport>
</portgroup>
+ <portgroup name='8021ad'>
+ <vlan trunk='yes'>
+ <tag id='555' nativeMode='dot1q-tunnel'/>
+ <tag id='666'/>
+ </vlan>
+ <virtualport>
+ <parameters profileid='8021ad-profile'/>
+ </virtualport>
+ </portgroup>
</network>
--
1.8.3.1
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
