Re: [PATCH RESEND] qemu: Process RDMA GID state change event

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 05, 2018 at 05:42:10PM +0100, Michal Privoznik wrote:
> [There is no need to resend your patch just to put yourself onto CC
> list. The review policy is always "reply to all"]

Hi Michal,

Actually i posted the "RESEND" as my original mail was not shown up in
https://www.redhat.com/archives/libvir-list so I followed the
recommendations (register to mailing list etc) and re-post.

> 
> On 11/05/2018 11:50 AM, Yuval Shaia wrote:
> > This event is emitted on the monitor when a GID table in pvrdma device
> > is modified and the change needs to be propagate to the backend RDMA
> > device's GID table.
> 
> Not yet, your qemu patches are not merged yet ;-) I will provide review
> anyway, but even if this patch was good as is we couldn't merge it
> unless it's merged into qemu repo first. We have our history with that.

Yeah, not yet merged but assuming both should be merged at the same time
due to dependency i had to start the reviews in parallel.

The qemu patches will probably merged in the in the next few weeks (v3.2)
so I'd like to do the best to be ready with this one too.

Anyways, appreciate much your review i took all you comments and will post
v2 soon. Please check my answers/questions below.

> 
> > 
> > The control over the RDMA device's GID table is done by updating the
> > device's Ethernet function addresses.
> > Usually the first GID entry is determine by the MAC address, the second
> > by the first IPv6 address and the third by the IPv4 address. Other
> > entries can be added by adding more IP addresses. The opposite is the
> > same, i.e. whenever an address is removed, the corresponding GID entry
> > is removed.
> > 
> > The process is done by the network and RDMA stacks. Whenever an address
> > is added the ib_core driver is notified and calls the device driver's
> > add_gid function which in turn update the device.
> > 
> > To support this in pvrdma device we need to hook into the create_bind
> > and destroy_bind HW commands triggered by pvrdma driver in guest.
> > Whenever a changed is made to the pvrdma device's GID table a special
> > QMP messages is sent to be processed by libvirt to update the address of
> > the backend Ethernet device.
> > 
> > Signed-off-by: Yuval Shaia <yuval.shaia@xxxxxxxxxx>
> > ---
> >  src/qemu/qemu_domain.c       |  3 ++
> >  src/qemu/qemu_domain.h       | 15 +++++++++
> >  src/qemu/qemu_driver.c       | 40 ++++++++++++++++++++++++
> >  src/qemu/qemu_monitor.c      | 28 +++++++++++++++++
> >  src/qemu/qemu_monitor.h      | 13 ++++++++
> >  src/qemu/qemu_monitor_json.c | 36 ++++++++++++++++++++++
> >  src/qemu/qemu_process.c      | 59 ++++++++++++++++++++++++++++++++++++
> >  7 files changed, 194 insertions(+)
> > 
> > diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
> > index ba3fff607a..8da54c7ee9 100644
> > --- a/src/qemu/qemu_domain.c
> > +++ b/src/qemu/qemu_domain.c
> > @@ -13479,6 +13479,9 @@ qemuProcessEventFree(struct qemuProcessEvent *event)
> >      case QEMU_PROCESS_EVENT_GUESTPANIC:
> >          qemuMonitorEventPanicInfoFree(event->data);
> >          break;
> > +    case QEMU_PROCESS_EVENT_RDMA_GID_STATUS_CHANGED:
> > +        qemuMonitorEventRdmaGidStatusFree(event->data);
> > +        break;
> >      case QEMU_PROCESS_EVENT_WATCHDOG:
> >      case QEMU_PROCESS_EVENT_DEVICE_DELETED:
> >      case QEMU_PROCESS_EVENT_NIC_RX_FILTER_CHANGED:
> > diff --git a/src/qemu/qemu_domain.h b/src/qemu/qemu_domain.h
> > index 80bd4bde91..1b188843e3 100644
> > --- a/src/qemu/qemu_domain.h
> > +++ b/src/qemu/qemu_domain.h
> > @@ -478,6 +478,18 @@ struct _qemuDomainVsockPrivate {
> >  };
> >  
> >  
> > +typedef struct _qemuDomainRdmaGidStatusChangedPrivate qemuDomainRdmaGidStatusChangedPrivate;
> > +typedef qemuDomainRdmaGidStatusChangedPrivate *qemuDomainRdmaGidStatusChangedPrivatePtr;
> > +struct _qemuDomainRdmaGidStatusChangedPrivate {
> > +    virObject parent;
> > +
> > +    char *netdev;
> > +    bool gid_status;
> > +    uint64_t subnet_prefix;
> > +    uint64_t interface_id;
> 
> We use ULL instead of uint64_t.

Sure, will do.

> 
> > +};
> > +
> > +
> >  typedef enum {
> >      QEMU_PROCESS_EVENT_WATCHDOG = 0,
> >      QEMU_PROCESS_EVENT_GUESTPANIC,
> > @@ -487,6 +499,7 @@ typedef enum {
> >      QEMU_PROCESS_EVENT_BLOCK_JOB,
> >      QEMU_PROCESS_EVENT_MONITOR_EOF,
> >      QEMU_PROCESS_EVENT_PR_DISCONNECT,
> > +    QEMU_PROCESS_EVENT_RDMA_GID_STATUS_CHANGED,
> >  
> >      QEMU_PROCESS_EVENT_LAST
> >  } qemuProcessEventType;
> > @@ -499,6 +512,8 @@ struct qemuProcessEvent {
> >      void *data;
> >  };
> >  
> > +void qemuMonitorEventRdmaGidStatusFree(qemuDomainRdmaGidStatusChangedPrivatePtr info);
> 
> If this function has prefix qemuMonitor then is should be in
> qemu_monitor* file. Just like qemuMonitorEventPanicInfoFree() is.

Sure,
I did a quite mass here :( will change it.

> 
> > +
> >  void qemuProcessEventFree(struct qemuProcessEvent *event);
> >  
> >  typedef struct _qemuDomainLogContext qemuDomainLogContext;
> > diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
> > index a52e2495d5..dc088d844f 100644
> > --- a/src/qemu/qemu_driver.c
> > +++ b/src/qemu/qemu_driver.c
> > @@ -4788,6 +4788,43 @@ processPRDisconnectEvent(virDomainObjPtr vm)
> >  }
> >  
> >  
> > +static void
> > +processRdmaGidStatusChangedEvent(virDomainObjPtr vm,
> > +                                 qemuDomainRdmaGidStatusChangedPrivatePtr info)
> > +{
> > +    unsigned int prefix_len;
> > +    virSocketAddr addr = {0};
> > +    int rc;
> > +
> > +    if (!virDomainObjIsActive(vm))
> > +        return;
> > +
> > +    VIR_DEBUG("netdev=%s,gid_status=%d,subnet_prefix=0x%lx,interface_id=0x%lx",
> > +              info->netdev, info->gid_status, info->subnet_prefix,
> > +              info->interface_id);
> > +
> > +    if (info->subnet_prefix) {
> > +        prefix_len = 64;
> > +        uint32_t ipv6[4];
> > +        memcpy(&ipv6[0], &info->subnet_prefix, sizeof(info->subnet_prefix));
> > +        memcpy(&ipv6[2], &info->interface_id, sizeof(info->subnet_prefix));
> 
> This should have been sizeof(info->interface_id). I know it doesn't
> matter that much since they are both the same size, but still.

Yeah, nice catch.

> 
> > +        virSocketAddrSetIPv6AddrNetOrder(&addr, ipv6);
> > +    } else {
> > +        prefix_len = 24;
> > +        virSocketAddrSetIPv4AddrNetOrder(&addr, info->interface_id >> 32);
> > +    }
> > +
> > +    if (info->gid_status)
> > +        rc = virNetDevIPAddrAdd(info->netdev, &addr, NULL, prefix_len);
> > +    else
> > +        rc = virNetDevIPAddrDel(info->netdev, &addr, prefix_len);
> > +
> > +    if (rc)
> 
> if (rc < 0)
> 
> A negative retval denotes failure, a non-negative one means success. So
> if virNetDevIPAddr*() would return +1 (even though it is not right now),

That's was probably my problem, i read the function and saw either -1 or 0.
Will fix.

> your condition would still trigger, which is not good.
> 
> > +        VIR_ERROR(_("Fail to update address 0x%lx to %s"), info->interface_id,
> > +                  info->netdev);
> 
> VIR_WARN(). Also, since this is IP address, should we format it as such?

Make sense.

> 
> Frankly, I don't know about RDMA that much, but the qemu interface looks
> weird to me. If it wants to send an IP address to us it's doing that in
> a cryptic way.

Can you elaborate more on that?

Actually the RDMA device does not send IP addresses, from the RDMA device
perspective those uint64_ts (subnet_prefix and interface_id) are called GID
and the only way to add new GID to RDMA device is by adding the
"equivalent" IP(v6) address to the Ethernet function of the device.

Hope it make sense.

> 
> > +}
> > +
> > +
> >  static void qemuProcessEventHandler(void *data, void *opaque)
> >  {
> >      struct qemuProcessEvent *processEvent = data;
> > @@ -4828,6 +4865,9 @@ static void qemuProcessEventHandler(void *data, void *opaque)
> >      case QEMU_PROCESS_EVENT_PR_DISCONNECT:
> >          processPRDisconnectEvent(vm);
> >          break;
> > +    case QEMU_PROCESS_EVENT_RDMA_GID_STATUS_CHANGED:
> > +        processRdmaGidStatusChangedEvent(vm, processEvent->data);
> > +        break;
> >      case QEMU_PROCESS_EVENT_LAST:
> >          break;
> >      }
> > diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
> > index 7f7013e115..375ed7ceaf 100644
> > --- a/src/qemu/qemu_monitor.c
> > +++ b/src/qemu/qemu_monitor.c
> > @@ -1686,6 +1686,23 @@ qemuMonitorEmitPRManagerStatusChanged(qemuMonitorPtr mon,
> >  }
> >  
> >  
> > +int
> > +qemuMonitorEmitRdmaGidStatusChanged(qemuMonitorPtr mon, const char *netdev,
> > +                                    bool gid_status, uint64_t subnet_prefix,
> > +                                    uint64_t interface_id)
> > +{
> > +    int ret = -1;
> > +    VIR_DEBUG("mon=%p", mon);
> > +    VIR_DEBUG("netdev='%s',gid_status=%d,subnet_prefix=0x%lx,interface_id=0x%lx",
> > +              netdev, gid_status, subnet_prefix, interface_id);
> 
> No need for two separate VIR_DEBUG() calls. One would be sufficient.

Done.

> 
> > +
> > +    QEMU_MONITOR_CALLBACK(mon, ret, domainRdmaGidStatusChanged, mon->vm, netdev,
> > +                          gid_status, subnet_prefix, interface_id);
> > +
> > +    return ret;
> > +}
> > +
> > +
> >  int
> >  qemuMonitorSetCapabilities(qemuMonitorPtr mon)
> >  {
> > @@ -4298,6 +4315,17 @@ qemuMonitorEventPanicInfoFree(qemuMonitorEventPanicInfoPtr info)
> >  }
> >  
> >  
> > +void
> > +qemuMonitorEventRdmaGidStatusFree(qemuDomainRdmaGidStatusChangedPrivatePtr info)
> > +{
> > +    if (!info)
> > +        return;
> > +
> > +    VIR_FREE(info->netdev);
> > +    VIR_FREE(info);
> > +}
> > +
> > +
> >  int
> >  qemuMonitorSetWatchdogAction(qemuMonitorPtr mon,
> >                               const char *action)
> > diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
> > index 48b142a4f4..f5affe615a 100644
> > --- a/src/qemu/qemu_monitor.h
> > +++ b/src/qemu/qemu_monitor.h
> > @@ -281,6 +281,14 @@ typedef int (*qemuMonitorDomainPRManagerStatusChangedCallback)(qemuMonitorPtr mo
> >                                                                 bool connected,
> >                                                                 void *opaque);
> >  
> > +typedef int (*qemuMonitorDomainRdmaGidStatusChangedCallback)(qemuMonitorPtr mon,
> > +                                                             virDomainObjPtr vm,
> > +                                                             const char *netdev,
> > +                                                             bool gid_status,
> > +                                                             uint64_t subnet_prefix,
> > +                                                             uint64_t interface_id,
> > +                                                             void *opaque);
> > +
> >  typedef struct _qemuMonitorCallbacks qemuMonitorCallbacks;
> >  typedef qemuMonitorCallbacks *qemuMonitorCallbacksPtr;
> >  struct _qemuMonitorCallbacks {
> > @@ -314,6 +322,7 @@ struct _qemuMonitorCallbacks {
> >      qemuMonitorDomainBlockThresholdCallback domainBlockThreshold;
> >      qemuMonitorDomainDumpCompletedCallback domainDumpCompleted;
> >      qemuMonitorDomainPRManagerStatusChangedCallback domainPRManagerStatusChanged;
> > +    qemuMonitorDomainRdmaGidStatusChangedCallback domainRdmaGidStatusChanged;
> >  };
> >  
> >  char *qemuMonitorEscapeArg(const char *in);
> > @@ -448,6 +457,10 @@ int qemuMonitorEmitPRManagerStatusChanged(qemuMonitorPtr mon,
> >                                            const char *prManager,
> >                                            bool connected);
> >  
> > +int qemuMonitorEmitRdmaGidStatusChanged(qemuMonitorPtr mon, const char *netdev,
> > +                                        bool gid_status, uint64_t subnet_prefix,
> > +                                        uint64_t interface_id);
> > +
> >  int qemuMonitorStartCPUs(qemuMonitorPtr mon);
> >  int qemuMonitorStopCPUs(qemuMonitorPtr mon);
> >  
> > diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
> > index 3de298c9e2..8df9b426ba 100644
> > --- a/src/qemu/qemu_monitor_json.c
> > +++ b/src/qemu/qemu_monitor_json.c
> > @@ -91,6 +91,7 @@ static void qemuMonitorJSONHandleAcpiOstInfo(qemuMonitorPtr mon, virJSONValuePtr
> >  static void qemuMonitorJSONHandleBlockThreshold(qemuMonitorPtr mon, virJSONValuePtr data);
> >  static void qemuMonitorJSONHandleDumpCompleted(qemuMonitorPtr mon, virJSONValuePtr data);
> >  static void qemuMonitorJSONHandlePRManagerStatusChanged(qemuMonitorPtr mon, virJSONValuePtr data);
> > +static void qemuMonitorJSONHandleRdmaGidStatusChanged(qemuMonitorPtr mon, virJSONValuePtr data);
> >  
> >  typedef struct {
> >      const char *type;
> > @@ -114,6 +115,7 @@ static qemuEventHandler eventHandlers[] = {
> >      { "NIC_RX_FILTER_CHANGED", qemuMonitorJSONHandleNicRxFilterChanged, },
> >      { "POWERDOWN", qemuMonitorJSONHandlePowerdown, },
> >      { "PR_MANAGER_STATUS_CHANGED", qemuMonitorJSONHandlePRManagerStatusChanged, },
> > +    { "RDMA_GID_STATUS_CHANGED", qemuMonitorJSONHandleRdmaGidStatusChanged, },
> >      { "RESET", qemuMonitorJSONHandleReset, },
> >      { "RESUME", qemuMonitorJSONHandleResume, },
> >      { "RTC_CHANGE", qemuMonitorJSONHandleRTCChange, },
> > @@ -1351,6 +1353,40 @@ static void qemuMonitorJSONHandlePRManagerStatusChanged(qemuMonitorPtr mon,
> >  }
> >  
> >  
> > +static void qemuMonitorJSONHandleRdmaGidStatusChanged(qemuMonitorPtr mon,
> > +                                                      virJSONValuePtr data)
> > +{
> > +    const char *netdev;
> > +    bool gid_status;
> > +    unsigned long long subnet_prefix, interface_id;
> > +
> > +    if (!(netdev = virJSONValueObjectGetString(data, "netdev"))) {
> > +        VIR_WARN("missing netdev in GID_STATUS_CHANGED event");
> > +        return;
> > +    }
> > +
> > +    if (virJSONValueObjectGetBoolean(data, "gid-status", &gid_status)) {
> > +        VIR_WARN("missing gid-status in GID_STATUS_CHANGED event");
> > +        return;
> > +    }
> > +
> > +    if (virJSONValueObjectGetNumberUlong(data, "subnet-prefix",
> > +                                         &subnet_prefix)) {
> > +        VIR_WARN("missing subnet-prefix in GID_STATUS_CHANGED event");
> > +        return;
> > +    }
> > +
> > +    if (virJSONValueObjectGetNumberUlong(data, "interface-id",
> > +                                         &interface_id)) {
> > +        VIR_WARN("missing interface-id in GID_STATUS_CHANGED event");
> > +        return;
> > +    }
> > +
> > +    qemuMonitorEmitRdmaGidStatusChanged(mon, netdev, gid_status, subnet_prefix,
> > +                                        interface_id);
> > +}
> > +
> > +
> >  int
> >  qemuMonitorJSONHumanCommandWithFd(qemuMonitorPtr mon,
> >                                    const char *cmd_str,
> > diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
> > index 9cf971808c..45fc155d31 100644
> > --- a/src/qemu/qemu_process.c
> > +++ b/src/qemu/qemu_process.c
> > @@ -1703,6 +1703,64 @@ qemuProcessHandlePRManagerStatusChanged(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
> >  }
> >  
> >  
> > +static int
> > +qemuProcessHandleRdmaGidStatusChanged(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
> > +                                      virDomainObjPtr vm, const char *netdev,
> > +                                      bool gid_status, uint64_t subnet_prefix,
> > +                                      uint64_t interface_id, void *opaque)
> > +{
> > +    virQEMUDriverPtr driver = opaque;
> > +    qemuDomainObjPrivatePtr priv;
> > +    struct qemuProcessEvent *processEvent = NULL;
> > +    qemuDomainRdmaGidStatusChangedPrivatePtr rdmaGitStatusChangedPriv;
> > +    int ret = -1;
> > +
> > +    virObjectLock(vm);
> > +
> > +    VIR_DEBUG("netdev=%s,gid_status=%d,subnet_prefix=0x%lx,interface_id=0x%lx",
> > +              netdev, gid_status, subnet_prefix, interface_id);
> > +
> > +    priv = vm->privateData;
> > +    priv->prDaemonRunning = false;
> 
> Oops, I don't think that RDMA GID has anything to do with PR daemon ;-)

Correct, will remove.

> 
> > +
> > +    if (VIR_ALLOC(rdmaGitStatusChangedPriv) < 0)
> > +        goto out_unlock;
> 
> Our VIR_FREE() accepts NULL (despite some other public vir*Free() APIs
> which don't). Anyway, there is no need to have one label per each
> VIR_FREE() call.
> 
> > +
> > +    if (VIR_STRDUP(rdmaGitStatusChangedPriv->netdev, netdev) < 0)
> > +        goto out_free_rdma_priv;
> > +
> > +    rdmaGitStatusChangedPriv->gid_status = gid_status;
> > +    rdmaGitStatusChangedPriv->subnet_prefix = subnet_prefix;
> > +    rdmaGitStatusChangedPriv->interface_id = interface_id;
> > +
> > +    if (VIR_ALLOC(processEvent) < 0)
> > +        goto out_free_rdma_priv_netdev;
> > +
> > +    processEvent->eventType = QEMU_PROCESS_EVENT_RDMA_GID_STATUS_CHANGED;
> > +    processEvent->vm = virObjectRef(vm);
> > +    processEvent->data = rdmaGitStatusChangedPriv;
> > +
> > +    if (virThreadPoolSendJob(driver->workerPool, 0, processEvent) < 0) {
> > +        qemuProcessEventFree(processEvent);
> > +        virObjectUnref(vm);
> > +        goto out_free_rdma_priv_netdev;
> > +    }
> > +
> > +    ret = 0;
> > +    goto out_unlock;
> > +
> > + out_free_rdma_priv_netdev:
> > +    VIR_FREE(rdmaGitStatusChangedPriv->netdev);> +
> > + out_free_rdma_priv:
> > +    VIR_FREE(rdmaGitStatusChangedPriv);
> 
> How about calling qemuMonitorEventRdmaGidStatusFree() instead of these
> VIR_FREE()? That way we don't have to care/change this area of the code
> - updating the former would be just enough.

Good idea, will do.

> 
> > +
> > + out_unlock:
> > +    virObjectUnlock(vm);
> > +    return ret;
> > +}
> > +
> > +
> >  static qemuMonitorCallbacks monitorCallbacks = {
> >      .eofNotify = qemuProcessHandleMonitorEOF,
> >      .errorNotify = qemuProcessHandleMonitorError,
> > @@ -1732,6 +1790,7 @@ static qemuMonitorCallbacks monitorCallbacks = {
> >      .domainBlockThreshold = qemuProcessHandleBlockThreshold,
> >      .domainDumpCompleted = qemuProcessHandleDumpCompleted,
> >      .domainPRManagerStatusChanged = qemuProcessHandlePRManagerStatusChanged,
> > +    .domainRdmaGidStatusChanged = qemuProcessHandleRdmaGidStatusChanged,
> >  };
> >  
> >  static void
> > 
> 
> 
> Michal

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux