Hi @Andrea, Is there any chance that these patches catch up with 4.7.0 release? I see it's entering freeze. Expecting your comments. Thanks very much! Yi Min 在 2018/8/27 下午1:48, Yi Min Zhao 写道:
Abstract ======== The PCI representation in QEMU has recently been extended for S390 allowing configuration of zPCI attributes like uid (user-defined identifier) and fid (PCI function identifier). The details can be found here: https://lists.gnu.org/archive/html/qemu-devel/2016-06/msg07262.html To support the new zPCI feature of the S390 platform, two new XML attributes, @uid and @fid, are introduced for device addresses of type 'pci', i.e.: <hostdev mode='subsystem' type='pci'> <driver name='vfio'/> <source> <address domain='0x0001' bus='0x00' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' uid='0x0003' fid='0x00000027'/> </hostdev> uid and fid are optional attributes. If they are defined by the user, unique values within the guest domain must be used. If they are not specified and the architecture requires them, they are automatically generated with non-conflicting values. Current implementation is the most seamless one for the user as it unites the address specific data of a PCI device on one XML element. It could accommodate both specifying our special parameters (uid and fid) and re-using standard statements (domain, bus, slot and function) for PCI devices. User can still specify bus/slot/function for the virtualized PCI devices in the XML. Thus uid/fid act as an extension to the PCI address and are stored in a new structure 'virZPCIDeviceAddress' which is a member of common PCI Address structure. Additionally, two hashtables are used for assignment and reservation of uid/fid. In support of extending the PCI address, a new PCI address extension flag is introduced. This extension flag allows is not only dedicated for the S390 platform but also other architectures needing certain extensions to PCI address space. Code Base ========= commit in master: 3b89e1f962 docs: api_extension: Don't encourage other tools than git Change Log ========== v3->v4: 1. Update docs. 2. Format code style. 3. Optimize zPCI support check. 4. Move the check of zPCI defined in xml but unsupported by Qemu to qemuDomainDeviceDefValidate(). 5. Change zpci address member of PCI address struct from pointer to instance. 6. Modify zpci address definition principle. Currently the user must either define both of uid and fid or not. v2->v3: 1. Revise code style. 2. Update test cases. 3. Introduce qemuDomainCollectPCIAddressExtension() to collect PCI extension addresses. 4. Introduce virDeviceInfoPCIAddressExtensionPresent() to check if zPCI address exists. 5. Optimize zPCI address check logic. 6. Optimize passed parameters of zPCI addr alloc/release/reserve functions. 7. Report enum range error in qemuDomainDeviceSupportZPCI(). 8. Update commit messages. v1->v2: 1. Separate test commit and merge testcases into corresponding commits that introduce the functionalities firstly. 2. Spare some checks for zpci device. 3. Add vsock and controller support. 4. Add uin32 type schema. 5. Rename zpciuid and zpcifid to zpci_uid and zpci_fid. 6. Always return multibus support on S390. Yi Min Zhao (12): conf: Add definitions for 'uid' and 'fid' PCI address attributes qemu: Introduce zPCI capability conf: Introduce a new PCI address extension flag qemu: Enable PCI multi bus for S390 guests qemu: Auto add pci-root for s390/s390x guests conf: Introduce address caching for PCI extensions conf: Introduce parser, formatter for uid and fid conf: Allocate/release 'uid' and 'fid' in PCI address qemu: Generate and use zPCI device in QEMU command line qemu: Add hotpluging support for PCI devices on S390 guests docs: Add 'uid' and 'fid' information news: Update news for PCI address extension attributes cfg.mk | 1 + docs/formatdomain.html.in | 9 +- docs/news.xml | 10 + docs/schemas/basictypes.rng | 23 ++ docs/schemas/domaincommon.rng | 1 + src/conf/device_conf.c | 62 ++++ src/conf/device_conf.h | 14 + src/conf/domain_addr.c | 331 +++++++++++++++++++++ src/conf/domain_addr.h | 29 ++ src/conf/domain_conf.c | 6 + src/libvirt_private.syms | 4 + src/qemu/qemu_capabilities.c | 6 + src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 95 ++++++ src/qemu/qemu_command.h | 2 + src/qemu/qemu_domain.c | 27 ++ src/qemu/qemu_domain_address.c | 205 ++++++++++++- src/qemu/qemu_hotplug.c | 151 +++++++++- src/util/virpci.h | 11 + tests/qemucapabilitiesdata/caps_2.10.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.11.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.12.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.7.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.8.0.s390x.xml | 1 + tests/qemucapabilitiesdata/caps_2.9.0.s390x.xml | 1 + tests/qemuxml2argvdata/disk-virtio-s390-zpci.args | 26 ++ tests/qemuxml2argvdata/disk-virtio-s390-zpci.xml | 17 ++ .../hostdev-vfio-zpci-autogenerate.args | 25 ++ .../hostdev-vfio-zpci-autogenerate.xml | 18 ++ .../hostdev-vfio-zpci-boundaries.args | 29 ++ .../hostdev-vfio-zpci-boundaries.xml | 26 ++ .../hostdev-vfio-zpci-multidomain-many.args | 39 +++ .../hostdev-vfio-zpci-multidomain-many.xml | 67 +++++ tests/qemuxml2argvdata/hostdev-vfio-zpci.args | 25 ++ tests/qemuxml2argvdata/hostdev-vfio-zpci.xml | 19 ++ tests/qemuxml2argvtest.c | 20 ++ tests/qemuxml2xmloutdata/disk-virtio-s390-zpci.xml | 29 ++ .../hostdev-vfio-zpci-autogenerate.xml | 30 ++ .../hostdev-vfio-zpci-boundaries.xml | 42 +++ .../hostdev-vfio-zpci-multidomain-many.xml | 79 +++++ tests/qemuxml2xmloutdata/hostdev-vfio-zpci.xml | 30 ++ tests/qemuxml2xmltest.c | 17 ++ 42 files changed, 1518 insertions(+), 14 deletions(-) create mode 100644 tests/qemuxml2argvdata/disk-virtio-s390-zpci.args create mode 100644 tests/qemuxml2argvdata/disk-virtio-s390-zpci.xml create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-zpci-autogenerate.args create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-zpci-autogenerate.xml create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-zpci-boundaries.args create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-zpci-boundaries.xml create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-zpci-multidomain-many.args create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-zpci-multidomain-many.xml create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-zpci.args create mode 100644 tests/qemuxml2argvdata/hostdev-vfio-zpci.xml create mode 100644 tests/qemuxml2xmloutdata/disk-virtio-s390-zpci.xml create mode 100644 tests/qemuxml2xmloutdata/hostdev-vfio-zpci-autogenerate.xml create mode 100644 tests/qemuxml2xmloutdata/hostdev-vfio-zpci-boundaries.xml create mode 100644 tests/qemuxml2xmloutdata/hostdev-vfio-zpci-multidomain-many.xml create mode 100644 tests/qemuxml2xmloutdata/hostdev-vfio-zpci.xml
-- Yi Min -- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list
