While qemu supports the 'transaction' command since v1.1.0
(52e7c241ac766406f05fa) and the 'blockdev-snapshot-sync' command since
v0.14.0-rc0 we need to keep the capability bits present since some qemu
downstreams (RHEL/CentOS 7 for example) chose to cripple qemu by
arbitrarily compile out some stuff which was already present at that
time.
To simplify the crazy code just require both commands to be present at
the beginning of a external snapshot so that we can remove the case when
'transaction' would not be supported.
This also allows to drop any logic connected to the
VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC flag since snapshots are atomic with
the 'transaction' command.
Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx>
---
src/qemu/qemu_driver.c | 62 +++++++++++---------------------------------------
1 file changed, 13 insertions(+), 49 deletions(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 825b2b27e6..4f577e50d2 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -14614,18 +14614,9 @@ qemuDomainSnapshotPrepare(virDomainObjPtr vm,
size_t i;
bool active = virDomainObjIsActive(vm);
bool reuse = (*flags & VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT) != 0;
- bool atomic = (*flags & VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC) != 0;
bool found_internal = false;
bool forbid_internal = false;
int external = 0;
- qemuDomainObjPrivatePtr priv = vm->privateData;
-
- if (def->state == VIR_DOMAIN_DISK_SNAPSHOT &&
- reuse && !virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_TRANSACTION)) {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
- _("reuse is not supported with this QEMU binary"));
- goto cleanup;
- }
for (i = 0; i < def->ndisks; i++) {
virDomainSnapshotDiskDefPtr disk = &def->disks[i];
@@ -14756,18 +14747,6 @@ qemuDomainSnapshotPrepare(virDomainObjPtr vm,
if (external && !active)
*flags |= VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY;
- if (def->state != VIR_DOMAIN_DISK_SNAPSHOT && active) {
- if (external == 1 ||
- virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_TRANSACTION)) {
- *flags |= VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC;
- } else if (atomic && external > 1) {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
- _("atomic live snapshot of multiple disks "
- "is unsupported"));
- goto cleanup;
- }
- }
-
ret = 0;
cleanup:
@@ -15033,15 +15012,8 @@ qemuDomainSnapshotCreateDiskActive(virQEMUDriverPtr driver,
if (virDomainObjCheckActive(vm) < 0)
return -1;
- if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_TRANSACTION)) {
- if (!(actions = virJSONValueNewArray()))
- return -1;
- } else if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DISK_SNAPSHOT)) {
- virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
- _("live disk snapshot not supported with this "
- "QEMU binary"));
+ if (!(actions = virJSONValueNewArray()))
return -1;
- }
/* prepare a list of objects to use in the vm definition so that we don't
* have to roll back later */
@@ -15154,8 +15126,6 @@ qemuDomainSnapshotCreateActiveExternal(virQEMUDriverPtr driver,
char *xml = NULL;
bool memory = snap->def->memory == VIR_DOMAIN_SNAPSHOT_LOCATION_EXTERNAL;
bool memory_unlink = false;
- bool atomic = !!(flags & VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC);
- bool transaction = virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_TRANSACTION);
int thaw = 0; /* 1 if freeze succeeded, -1 if freeze failed */
bool pmsuspended = false;
virQEMUDriverConfigPtr cfg = NULL;
@@ -15163,6 +15133,14 @@ qemuDomainSnapshotCreateActiveExternal(virQEMUDriverPtr driver,
char *compressedpath = NULL;
virQEMUSaveDataPtr data = NULL;
+ if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DISK_SNAPSHOT) ||
+ !virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_TRANSACTION)) {
+ virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
+ _("live disk snapshot not supported with this "
+ "QEMU binary"));
+ return -1;
+ }
+
/* If quiesce was requested, then issue a freeze command, and a
* counterpart thaw command when it is actually sent to agent.
* The command will fail if the guest is paused or the guest agent
@@ -15197,20 +15175,11 @@ qemuDomainSnapshotCreateActiveExternal(virQEMUDriverPtr driver,
} else if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_RUNNING) {
/* For external checkpoints (those with memory), the guest
* must pause (either by libvirt up front, or by qemu after
- * _LIVE converges). For disk-only snapshots with multiple
- * disks, libvirt must pause externally to get all snapshots
- * to be at the same point in time, unless qemu supports
- * transactions. For a single disk, snapshot is atomic
- * without requiring a pause. Thanks to
- * qemuDomainSnapshotPrepare, if we got to this point, the
- * atomic flag now says whether we need to pause, and a
- * capability bit says whether to use transaction.
- */
+ * _LIVE converges). */
if (memory)
resume = true;
- if ((memory && !(flags & VIR_DOMAIN_SNAPSHOT_CREATE_LIVE)) ||
- (!memory && atomic && !transaction)) {
+ if (memory && !(flags & VIR_DOMAIN_SNAPSHOT_CREATE_LIVE)) {
if (qemuProcessStopCPUs(driver, vm, VIR_DOMAIN_PAUSED_SNAPSHOT,
QEMU_ASYNC_JOB_SNAPSHOT) < 0)
goto cleanup;
@@ -15265,13 +15234,8 @@ qemuDomainSnapshotCreateActiveExternal(virQEMUDriverPtr driver,
qemuDomainObjSetAsyncJobMask(vm, QEMU_JOB_DEFAULT_MASK);
}
- /* now the domain is now paused if:
- * - if a memory snapshot was requested
- * - an atomic snapshot was requested AND
- * qemu does not support transactions
- *
- * Next we snapshot the disks.
- */
+ /* now the domain is now paused if a memory snapshot was requested */
+
if ((ret = qemuDomainSnapshotCreateDiskActive(driver, vm, snap, flags,
QEMU_ASYNC_JOB_SNAPSHOT)) < 0)
goto cleanup;
--
2.16.2
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
