The following patch refactors the libvirt spec file conditional
logic to make it a little easier to manage all the different
Fedora/RHEL OS build variations, and also allow for easy
creation of a client-only build
The patch follows, but I'm including the full specfile below
too, since its easier to understand than the diff
# -*- rpm-spec -*-
# A client only build will create a libvirt.so only containing
# the generic RPC driver, and test driver and no libvirtd
# Default to a full server + client build
%define client_only 0
# Now turn off server build in certain cases
# RHEL-5 builds are client-only for s390, ppc
%if 0%{?rhel} == 5
%ifnarch i386 i586 i686 x86_64 ia64
%define client_only 1
%endif
%endif
# Disable all server side drivers if client only build requested
%if %{client_only}
%define server_drivers 0
%else
%define server_drivers 1
%endif
# Now set the defaults for all the important features, independant
# of any particular OS
# First the daemon itself
%define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
%define with_avahi 0%{!?_without_avahi:%{server_drivers}}
# Then the hypervisor drivers
%define with_xen 0%{!?_without_xen:%{server_drivers}}
%define with_xen_proxy 0%{!?_without_xen_proxy:%{server_drivers}}
%define with_qemu 0%{!?_without_qemu:%{server_drivers}}
%define with_openvz 0%{!?_without_openvz:%{server_drivers}}
%define with_lxc 0%{!?_without_lxc:%{server_drivers}}
%define with_vbox 0%{!?_without_vbox:%{server_drivers}}
%define with_uml 0%{!?_without_uml:%{server_drivers}}
%define with_one 0%{!?_without_one:%{server_drivers}}
%define with_phyp 0%{!?_without_phyp:%{server_drivers}}
%define with_esx 0%{!?_without_esx:%{server_drivers}}
# Then the secondary host drivers
%define with_network 0%{!?_without_network:%{server_drivers}}
%define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
%define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
%define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
%define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
%define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
%define with_numactl 0%{!?_without_numactl:%{server_drivers}}
%define with_selinux 0%{!?_without_selinux:%{server_drivers}}
%define with_hal 0%{!?_without_hal:%{server_drivers}}
# A few optional bits off by default, we enable later
%define with_polkit 0%{!?_without_polkit:0}
%define with_capng 0%{!?_without_capng:0}
%define with_netcf 0%{!?_without_netcf:0}
# Non-server/HV driver defaults which are always enabled
%define with_python 0%{!?_without_python:1}
%define with_sasl 0%{!?_without_sasl:1}
# Finally set the OS / architecture specific special cases
# Xen is available only on i386 x86_64 ia64
%ifnarch i386 i586 i686 x86_64 ia64
%define with_xen 0
%endif
# RHEL doesn't ship OpenVZ, VBox, UML, OpenNebula, PowerHypervisor or ESX
%if 0%{?rhel}
%define with_openvz 0
%define with_vbox 0
%define with_uml 0
%define with_one 0
%define with_phyp 0
%define with_esx 0
%endif
# RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
%if 0%{?rhel} == 5
%ifnarch x86_64
%define with_qemu 0
%endif
%define with_lxc 0
%endif
# RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
# on all archs. Other archs all have LXC available though
%if 0%{?rhel} >= 6
%ifnarch x86_64
%define with_qemu 0
%endif
%define with_xen 0
%endif
# If Xen isn't turned on, we shouldn't build the xen proxy either
%if ! %{with_xen}
%define with_xen_proxy 0
%endif
# Fedora doesn't have any QEMU on ppc64 - only ppc
%if 0%{?fedora}
%ifarch ppc64
%define with_qemu 0
%endif
%endif
# PolicyKit was introduced in Fedora 8 / RHEL-6 or newer, allowing
# the setuid Xen proxy to be killed off
%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
%define with_polkit 0%{!?_without_polkit:1}
%define with_xen_proxy 0
%endif
# libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%define with_capng 0%{!?_without_capng:1}
%endif
# netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%define with_netcf 0%{!?_without_netcf:%{server_drivers}}
%endif
# Force QEMU to run as non-root
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%define qemu_user qemu
%define qemu_group qemu
%else
%define qemu_user root
%define qemu_group root
%endif
# The RHEL-5 Xen package has some feature backports. This
# flag is set to enable use of those special bits on RHEL-5
%if 0%{?rhel} == 5
%define with_rhel5 1
%else
%define with_rhel5 0
%endif
Summary: Library providing a simple API virtualization
Name: libvirt
Version: 0.7.1
Release: 1%{?dist}%{?extra_release}
License: LGPLv2+
Group: Development/Libraries
Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
URL: http://libvirt.org/
BuildRequires: python-devel
# The client side, i.e. shared libs and virsh are in a subpackage
Requires: libvirt-client = %{version}-%{release}
# Used by many of the drivers, so turn it on whenever the
# daemon is present
%if %{with_libvirtd}
Requires: bridge-utils
%endif
%if %{with_network}
Requires: dnsmasq
Requires: iptables
%endif
# needed for device enumeration
%if %{with_hal}
Requires: hal
%endif
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
Requires: polkit >= 0.93
%else
Requires: PolicyKit >= 0.6
%endif
%endif
%if %{with_storage_fs}
# For mount/umount in FS driver
BuildRequires: util-linux
# For showmount in FS driver (netfs discovery)
BuildRequires: nfs-utils
Requires: nfs-utils
# For glusterfs
%if 0%{?fedora} >= 11
Requires: glusterfs-client >= 2.0.1
%endif
%endif
%if %{with_qemu}
# From QEMU RPMs
Requires: /usr/bin/qemu-img
# For image compression
Requires: gzip
Requires: bzip2
Requires: lzop
Requires: xz
%else
%if %{with_xen}
# From Xen RPMs
Requires: /usr/sbin/qcow-create
%endif
%endif
%if %{with_storage_lvm}
# For LVM drivers
Requires: lvm2
%endif
%if %{with_storage_iscsi}
# For ISCSI driver
Requires: iscsi-initiator-utils
%endif
%if %{with_storage_disk}
# For disk driver
Requires: parted
%endif
%if %{with_storage_mpath}
# For multipath support
Requires: device-mapper
%endif
%if %{with_xen}
BuildRequires: xen-devel
%endif
%if %{with_one}
BuildRequires: xmlrpc-c-devel >= 1.14.0
%endif
BuildRequires: libxml2-devel
BuildRequires: xhtml1-dtds
BuildRequires: readline-devel
BuildRequires: ncurses-devel
BuildRequires: gettext
BuildRequires: gnutls-devel
%if %{with_hal}
BuildRequires: hal-devel
%endif
%if %{with_avahi}
BuildRequires: avahi-devel
%endif
%if %{with_selinux}
BuildRequires: libselinux-devel
%endif
%if %{with_network}
BuildRequires: dnsmasq
%endif
BuildRequires: bridge-utils
%if %{with_sasl}
BuildRequires: cyrus-sasl-devel
%endif
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# Only need the binary, not -devel
BuildRequires: polkit >= 0.93
%else
BuildRequires: PolicyKit-devel >= 0.6
%endif
%endif
%if %{with_storage_fs}
# For mount/umount in FS driver
BuildRequires: util-linux
%endif
%if %{with_qemu}
# From QEMU RPMs
BuildRequires: /usr/bin/qemu-img
%else
%if %{with_xen}
# From Xen RPMs
BuildRequires: /usr/sbin/qcow-create
%endif
%endif
%if %{with_storage_lvm}
# For LVM drivers
BuildRequires: lvm2
%endif
%if %{with_storage_iscsi}
# For ISCSI driver
BuildRequires: iscsi-initiator-utils
%endif
%if %{with_storage_disk}
# For disk driver
BuildRequires: parted-devel
%if 0%{?rhel} == 5
# Broken RHEL-5 parted RPM is missing a dep
BuildRequires: e2fsprogs-devel
%endif
%endif
%if %{with_storage_mpath}
# For Multipath support
%if 0%{?rhel} == 5
# Broken RHEL-5 packaging has header files in main RPM :-(
BuildRequires: device-mapper
%else
BuildRequires: device-mapper-devel
%endif
%endif
%if %{with_numactl}
# For QEMU/LXC numa info
BuildRequires: numactl-devel
%endif
%if %{with_capng}
BuildRequires: libcap-ng-devel >= 0.5.0
%endif
%if %{with_phyp}
BuildRequires: libssh2-devel
%endif
%if %{with_netcf}
BuildRequires: netcf-devel
%endif
# Fedora build root suckage
BuildRequires: gawk
%description
Libvirt is a C toolkit to interact with the virtualization capabilities
of recent versions of Linux (and other OSes). The main package includes
the libvirtd server exporting the virtualization support.
%package client
Summary: Client side library and utilities of the libvirt library
Group: Development/Libraries
Requires: readline
Requires: ncurses
# So remote clients can access libvirt over SSH tunnel
# (client invokes 'nc' against the UNIX socket on the server)
Requires: nc
%if %{with_sasl}
Requires: cyrus-sasl
# Not technically required, but makes 'out-of-box' config
# work correctly & doesn't have onerous dependencies
Requires: cyrus-sasl-md5
%endif
%description client
Shared libraries and client binaries needed to access to the
virtualization capabilities of recent versions of Linux (and other OSes).
%package devel
Summary: Libraries, includes, etc. to compile with the libvirt library
Group: Development/Libraries
Requires: libvirt = %{version}-%{release}
Requires: pkgconfig
%if %{with_xen}
Requires: xen-devel
%endif
%description devel
Includes and documentations for the C library providing an API to use
the virtualization capabilities of recent versions of Linux (and other OSes).
%if %{with_python}
%package python
Summary: Python bindings for the libvirt library
Group: Development/Libraries
Requires: libvirt = %{version}-%{release}
%description python
The libvirt-python package contains a module that permits applications
written in the Python programming language to use the interface
supplied by the libvirt library to use the virtualization capabilities
of recent versions of Linux (and other OSes).
%endif
%prep
%setup -q
%build
%if ! %{with_xen}
%define _without_xen --without-xen
%endif
%if ! %{with_qemu}
%define _without_qemu --without-qemu
%endif
%if ! %{with_openvz}
%define _without_openvz --without-openvz
%endif
%if ! %{with_lxc}
%define _without_lxc --without-lxc
%endif
%if ! %{with_vbox}
%define _without_vbox --without-vbox
%endif
%if ! %{with_sasl}
%define _without_sasl --without-sasl
%endif
%if ! %{with_avahi}
%define _without_avahi --without-avahi
%endif
%if ! %{with_phyp}
%define _without_phyp --without-phyp
%endif
%if ! %{with_esx}
%define _without_esx --without-esx
%endif
%if ! %{with_polkit}
%define _without_polkit --without-polkit
%endif
%if ! %{with_python}
%define _without_python --without-python
%endif
%if ! %{with_libvirtd}
%define _without_libvirtd --without-libvirtd
%endif
%if ! %{with_uml}
%define _without_uml --without-uml
%endif
%if ! %{with_one}
%define _without_one --without-one
%endif
%if %{with_rhel5}
%define _with_rhel5_api --with-rhel5-api
%endif
%if ! %{with_network}
%define _without_network --without-network
%endif
%if ! %{with_storage_fs}
%define _without_storage_fs --without-storage-fs
%endif
%if ! %{with_storage_lvm}
%define _without_storage_lvm --without-storage-lvm
%endif
%if ! %{with_storage_iscsi}
%define _without_storage_iscsi --without-storage-iscsi
%endif
%if ! %{with_storage_disk}
%define _without_storage_disk --without-storage-disk
%endif
%if ! %{with_storage_mpath}
%define _without_storage_mpath --without-storage-mpath
%endif
%if ! %{with_numactl}
%define _without_numactl --without-numactl
%endif
%if ! %{with_capng}
%define _without_capng --without-capng
%endif
%if ! %{with_netcf}
%define _without_netcf --without-netcf
%endif
%if ! %{with_selinux}
%define _without_selinux --without-selinux
%endif
%if ! %{with_hal}
%define _without_hal --without-hal
%endif
%configure %{?_without_xen} \
%{?_without_qemu} \
%{?_without_openvz} \
%{?_without_lxc} \
%{?_without_vbox} \
%{?_without_sasl} \
%{?_without_avahi} \
%{?_without_polkit} \
%{?_without_python} \
%{?_without_libvirtd} \
%{?_without_uml} \
%{?_without_one} \
%{?_without_phyp} \
%{?_without_esx} \
%{?_without_network} \
%{?_with_rhel5_api} \
%{?_without_storage_fs} \
%{?_without_storage_lvm} \
%{?_without_storage_iscsi} \
%{?_without_storage_disk} \
%{?_without_storage_mpath} \
%{?_without_numactl} \
%{?_without_capng} \
%{?_without_netcf} \
%{?_without_selinux} \
%{?_without_hal} \
--with-qemu-user=%{qemu_user} \
--with-qemu-group=%{qemu_group} \
--with-init-script=redhat \
--with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid
make %{?_smp_mflags}
gzip -9 ChangeLog
%install
rm -fr %{buildroot}
%makeinstall
(cd docs/examples ; make clean ; rm -rf .deps Makefile Makefile.in)
(cd docs/examples/python ; rm -rf .deps Makefile Makefile.in)
(cd examples/hellolibvirt ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
(cd examples/domain-events/events-c ; make clean ;rm -rf .deps .libs Makefile Makefile.in)
rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
%if %{with_network}
# We don't want to install /etc/libvirt/qemu/networks in the main %files list
# because if the admin wants to delete the default network completely, we don't
# want to end up re-incarnating it on every RPM upgrade.
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
$RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
# Strip auto-generated UUID - we need it generated per-install
sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
%else
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
%endif
%if ! %{with_qemu}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%endif
%find_lang %{name}
%if ! %{with_python}
rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
%endif
%if %{client_only}
rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}
%endif
%if ! %{with_qemu}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
%endif
%if %{with_libvirtd}
chmod 0644 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/libvirtd
%endif
%clean
rm -fr %{buildroot}
%pre
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# Normally 'setup' adds this in /etc/passwd, but this is
# here for case of upgrades from earlier Fedora/RHEL. This
# UID/GID pair is reserved for qemu:qemu
getent group kvm >/dev/null || groupadd -g 36 -r kvm
getent group qemu >/dev/null || groupadd -g 107 -r qemu
getent passwd qemu >/dev/null || \
useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
-c "qemu user" qemu
%endif
%post
%if %{with_libvirtd}
%if %{with_network}
# We want to install the default network for initial RPM installs
# or on the first upgrade from a non-network aware libvirt only.
# We check this by looking to see if the daemon is already installed
/sbin/chkconfig --list libvirtd 1>/dev/null 2>&1
if [ $? != 0 -a ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ]
then
UUID=`/usr/bin/uuidgen`
sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
< %{_datadir}/libvirt/networks/default.xml \
> %{_sysconfdir}/libvirt/qemu/networks/default.xml
ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
fi
%endif
/sbin/chkconfig --add libvirtd
if [ "$1" -ge "1" ]; then
/sbin/service libvirtd condrestart > /dev/null 2>&1
fi
%endif
%preun
%if %{with_libvirtd}
if [ $1 = 0 ]; then
/sbin/service libvirtd stop 1>/dev/null 2>&1
/sbin/chkconfig --del libvirtd
fi
%endif
%post client -p /sbin/ldconfig
%postun client -p /sbin/ldconfig
%if %{with_libvirtd}
%files
%defattr(-, root, root)
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
%if %{with_network}
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
%endif
%{_sysconfdir}/rc.d/init.d/libvirtd
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
%if %{with_qemu}
%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
%endif
%dir %{_datadir}/libvirt/
%if %{with_network}
%dir %{_datadir}/libvirt/networks/
%{_datadir}/libvirt/networks/default.xml
%endif
%dir %{_localstatedir}/run/libvirt/
%dir %{_localstatedir}/lib/libvirt/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
%dir %attr(0700, root, root) %{_localstatedir}/cache/libvirt/
%if %{with_qemu}
%dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
%dir %attr(0700, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
%dir %attr(0700, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
%endif
%if %{with_lxc}
%dir %{_localstatedir}/run/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
%endif
%if %{with_uml}
%dir %{_localstatedir}/run/libvirt/uml/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
%endif
%if %{with_network}
%dir %{_localstatedir}/run/libvirt/network/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/iptables/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/iptables/filter/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/iptables/nat/
%endif
%if %{with_qemu}
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%endif
%{_datadir}/augeas/lenses/libvirtd.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
%if %{with_polkit}
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
%else
%{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
%endif
%endif
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
%if %{with_qemu}
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
%endif
%if %{with_xen_proxy}
%attr(4755, root, root) %{_libexecdir}/libvirt_proxy
%endif
%if %{with_lxc}
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
%endif
%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
%attr(0755, root, root) %{_sbindir}/libvirtd
%doc docs/*.xml
%endif
%files client -f %{name}.lang
%defattr(-, root, root)
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
%{_mandir}/man1/virsh.1*
%{_mandir}/man1/virt-xml-validate.1*
%{_bindir}/virsh
%{_bindir}/virt-xml-validate
%{_libdir}/lib*.so.*
%dir %{_datadir}/libvirt/
%dir %{_datadir}/libvirt/schemas/
%{_datadir}/libvirt/schemas/domain.rng
%{_datadir}/libvirt/schemas/network.rng
%{_datadir}/libvirt/schemas/storagepool.rng
%{_datadir}/libvirt/schemas/storagevol.rng
%{_datadir}/libvirt/schemas/nodedev.rng
%{_datadir}/libvirt/schemas/capability.rng
%{_datadir}/libvirt/schemas/interface.rng
%{_datadir}/libvirt/schemas/secret.rng
%{_datadir}/libvirt/schemas/storageencryption.rng
%if %{with_sasl}
%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
%endif
%files devel
%defattr(-, root, root)
%{_libdir}/lib*.so
%dir %{_includedir}/libvirt
%{_includedir}/libvirt/*.h
%{_libdir}/pkgconfig/libvirt.pc
%dir %{_datadir}/gtk-doc/html/libvirt/
%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
%doc %{_datadir}/gtk-doc/html/libvirt/*.html
%doc %{_datadir}/gtk-doc/html/libvirt/*.png
%doc %{_datadir}/gtk-doc/html/libvirt/*.css
%doc docs/*.html docs/html docs/*.gif
%doc docs/examples
%doc docs/libvirt-api.xml
%doc examples
%if %{with_python}
%files python
%defattr(-, root, root)
%doc AUTHORS NEWS README COPYING.LIB
%{_libdir}/python*/site-packages/libvirt.py*
%{_libdir}/python*/site-packages/libvirtmod*
%doc python/tests/*.py
%doc python/TODO
%doc python/libvirtclass.txt
%doc docs/examples/python
%endif
--
Libvir-list mailing list
Libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list