Move the various modelName == NAME_NONE from the command line
generation into domain controller validation. Also rather than
have multiple cases with the same check, let's make the code
more generic, but also note that it was the modelName option
that caused the failure. We also have to be sure not to check
the PCI models that we don't care about.
For the remaining checks in command line building, we can use
the field name in the error message to be more specific about
what causes the failure.
Signed-off-by: John Ferlan <jferlan@xxxxxxxxxx>
---
src/qemu/qemu_command.c | 52 ++++++++++++-------------------------------------
src/qemu/qemu_domain.c | 12 ++++++++++++
2 files changed, 24 insertions(+), 40 deletions(-)
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 4e292e446..45cbf5381 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -2722,11 +2722,9 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
switch ((virDomainControllerModelPCI) def->model) {
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_BRIDGE:
- if (pciopts->modelName
- == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE ||
- pciopts->chassisNr == -1) {
+ if (pciopts->chassisNr == -1) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("autogenerated pci-bridge options not set"));
+ _("autogenerated pci-bridge option chassisNr not set"));
goto error;
}
@@ -2756,12 +2754,9 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
def->info.alias);
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_EXPANDER_BUS:
- if (pciopts->modelName
- == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE ||
- pciopts->busNr == -1) {
+ if (pciopts->busNr == -1) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("autogenerated pci-expander-bus options not set"));
- goto error;
+ _("autogenerated pci-expander-bus option busNr not set"));
}
modelName = virDomainControllerPCIModelNameTypeToString(pciopts->modelName);
@@ -2793,13 +2788,6 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
pciopts->numaNode);
break;
case VIR_DOMAIN_CONTROLLER_MODEL_DMI_TO_PCI_BRIDGE:
- if (pciopts->modelName
- == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("autogenerated dmi-to-pci-bridge options not set"));
- goto error;
- }
-
modelName = virDomainControllerPCIModelNameTypeToString(pciopts->modelName);
if (!modelName) {
virReportError(VIR_ERR_INTERNAL_ERROR,
@@ -2824,12 +2812,6 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
virBufferAsprintf(&buf, "%s,id=%s", modelName, def->info.alias);
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT_PORT:
- if (pciopts->modelName
- == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("autogenerated pcie-root-port options not set"));
- goto error;
- }
modelName = virDomainControllerPCIModelNameTypeToString(pciopts->modelName);
if (!modelName) {
virReportError(VIR_ERR_INTERNAL_ERROR,
@@ -2869,12 +2851,6 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
pciopts->chassis, def->info.alias);
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_UPSTREAM_PORT:
- if (pciopts->modelName
- == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("autogenerated pcie-switch-upstream-port options not set"));
- goto error;
- }
modelName = virDomainControllerPCIModelNameTypeToString(pciopts->modelName);
if (!modelName) {
virReportError(VIR_ERR_INTERNAL_ERROR,
@@ -2900,13 +2876,12 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
virBufferAsprintf(&buf, "%s,id=%s", modelName, def->info.alias);
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT:
- if (pciopts->modelName
- == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE ||
- pciopts->chassis == -1 ||
+ if (pciopts->chassis == -1 ||
pciopts->port == -1) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ virReportError(VIR_ERR_INTERNAL_ERROR,
_("autogenerated pcie-switch-downstream-port "
- "options not set"));
+ "options chassis=%d or port=%d not set"),
+ pciopts->chassis, pciopts->port);
goto error;
}
@@ -2937,11 +2912,9 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
pciopts->chassis, def->info.alias);
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_EXPANDER_BUS:
- if (pciopts->modelName
- == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE ||
- pciopts->busNr == -1) {
+ if (pciopts->busNr == -1) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("autogenerated pcie-expander-bus options not set"));
+ _("autogenerated pcie-expander-bus option busNr not set"));
goto error;
}
@@ -2974,10 +2947,9 @@ qemuBuildControllerDevStr(const virDomainDef *domainDef,
pciopts->numaNode);
break;
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT:
- if (pciopts->modelName == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE ||
- pciopts->targetIndex == -1) {
+ if (pciopts->targetIndex == -1) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("autogenerated pci-root options not set"));
+ _("autogenerated pci-root option targetIndex not set"));
goto error;
}
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index ceb03a0cd..ecfff4209 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -4014,6 +4014,7 @@ qemuDomainDeviceDefValidateControllerPCI(const virDomainControllerDef *controlle
const virDomainDef *def)
{
virDomainControllerModelPCI model = controller->model;
+ const virDomainPCIControllerOpts *pciopts;
/* skip pcie-root */
if (controller->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI &&
@@ -4049,6 +4050,17 @@ qemuDomainDeviceDefValidateControllerPCI(const virDomainControllerDef *controlle
break;
}
+ pciopts = &controller->opts.pciopts;
+ if (controller->model != VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT &&
+ controller->model != VIR_DOMAIN_CONTROLLER_MODEL_PCI_LAST) {
+ if (pciopts->modelName == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("autogenerated %s option modelName not set"),
+ virDomainControllerModelPCITypeToString(controller->model));
+ return -1;
+ }
+ }
+
return 0;
}
--
2.13.6
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
