Re: [libvirt] [PATCH] Add some automatic dependency checks for configure to enable/disable {ESX, UML, LXC, Xen-Inotify}

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 30, 2009 at 09:25:55PM +0200, Maximilian Wilhelm wrote:
> Hi!
> 
> While building libVirt on an older Debian Etch machine, I stumbled
> across some automatic enabled drivers which stopped configure and make
> very badly due to missing header files, old libraries and stuff.
> 
> So I decided to improve the automagic tests so others won't face the
> same problem again :)

ACK, this is good, everything should be automatic !

> >From e198b3ed1fcfa68465a31d75192a901fc72b2c14 Mon Sep 17 00:00:00 2001
> From: Maximilian Wilhelm <max@xxxxxxxxxxx>
> Date: Thu, 30 Jul 2009 20:18:30 +0200
> Subject: [PATCH] * configure.in: Add automatic check for libcurl and disable ESX driver if
>    not present
> 
> ---
>  configure.in |   22 +++++++++++++---------
>  1 files changed, 13 insertions(+), 9 deletions(-)
> 
> diff --git a/configure.in b/configure.in
> index b905b23..db559f1 100644
> --- a/configure.in
> +++ b/configure.in
> @@ -198,7 +198,7 @@ AC_ARG_WITH([lxc],
>  AC_ARG_WITH([one],
>  [  --with-one              add ONE support (on)],[],[with_one=check])
>  AC_ARG_WITH([esx],
> -[  --with-esx              add ESX support (on)],[],[with_esx=yes])
> +[  --with-esx              add ESX support (on)],[],[with_esx=check])
>  AC_ARG_WITH([test],
>  [  --with-test             add test driver support (on)],[],[with_test=yes])
>  AC_ARG_WITH([remote],
> @@ -1139,7 +1139,7 @@ AC_SUBST([LIBPARTED_CFLAGS])
>  AC_SUBST([LIBPARTED_LIBS])
>  
>  dnl
> -dnl check for libcurl
> +dnl check for libcurl (ESX)
>  dnl
>  
>  LIBCURL_CFLAGS=""
> @@ -1147,13 +1147,17 @@ LIBCURL_LIBS=""
>  LIBCURL_REQUIRED="7.18.0"
>  LIBCURL_FOUND="no"
>  
> -if test "$with_esx" = "yes" ; then
> -  PKG_CHECK_MODULES(LIBCURL, libcurl >= $LIBCURL_REQUIRED, [LIBCURL_FOUND=yes], [LIBCURL_FOUND=no])
> -
> -  if test "$LIBCURL_FOUND" = "no"; then
> -    AC_MSG_CHECKING(for libcurl libraries >= $LIBCURL_REQUIRED)
> -    AC_MSG_ERROR([libcurl >= $LIBCURL_REQUIRED is required for the ESX driver])
> -  fi
> +if test "$with_esx" = "yes" -o "$with_esx" = "check"; then
> +    PKG_CHECK_MODULES(LIBCURL, libcurl >= $LIBCURL_REQUIRED, [
> +        LIBCURL_FOUND=yes
> +    ], [
> +        if test "$with_esx" = "check"; then
> +            with_esx=no
> +            AC_MSG_NOTICE([libcurl is required for ESX driver, disabling it])
> +        else
> +            AC_MSG_ERROR([libcurl >= $LIBCURL_REQUIRED is required for the ESX driver])
> +        fi
> +    ])
>  fi
>  
>  AC_SUBST([LIBCURL_CFLAGS])
> -- 
> 1.5.6.5
> 

> >From 6d88873f6d4bc38c338ad05fbc4491b3fcbd3c05 Mon Sep 17 00:00:00 2001
> From: Maximilian Wilhelm <max@xxxxxxxxxxx>
> Date: Thu, 30 Jul 2009 20:27:23 +0200
> Subject: [PATCH] * configure.in: Add automatic check for <sys/inotify.h> header and disable the
>    UML driver if not present
> 
> ---
>  configure.in |   25 ++++++++++++++++++++++++-
>  1 files changed, 24 insertions(+), 1 deletions(-)
> 
> diff --git a/configure.in b/configure.in
> index db559f1..008424c 100644
> --- a/configure.in
> +++ b/configure.in
> @@ -184,7 +184,7 @@ AC_ARG_WITH([xen-inotify],
>  AC_ARG_WITH([qemu],
>  [  --with-qemu             add QEMU/KVM support (on)],[],[with_qemu=yes])
>  AC_ARG_WITH([uml],
> -[  --with-uml              add UML support (on)],[],[with_uml=yes])
> +[  --with-uml              add UML support (on)],[],[with_uml=check])
>  AC_ARG_WITH([openvz],
>  [  --with-openvz           add OpenVZ support (on)],[],[with_openvz=yes])
>  AC_ARG_WITH([libssh],
> @@ -780,6 +780,29 @@ AM_CONDITIONAL([HAVE_NUMACTL], [test "$with_numactl" != "no"])
>  AC_SUBST([NUMACTL_CFLAGS])
>  AC_SUBST([NUMACTL_LIBS])
>  
> +
> +dnl
> +dnl Checks for the UML driver
> +dnl
> +
> +if test "$with_uml" = "yes" -o "$with_uml" = "check"; then
> +    AC_CHECK_HEADER([sys/inotify.h], [
> +        with_uml=yes
> +    ], [
> +        if test "$with_uml" = "check"; then
> +            with_uml=no
> +            AC_MSG_NOTICE([<sys/inotify.h> is required for the UML driver, disabling it])
> +        else
> +            AC_MSG_ERROR([The <sys/inotify.h> is required for the UML driver. Upgrade your libc6.])
> +        fi
> +    ])
> +fi
> +
> +
> +dnl
> +dnl libssh checks
> +dnl
> +
>  if test "$with_libssh" != "yes" -a "$with_libssh" != "no"; then
>  		libssh_path="$with_libssh"
>  elif test "$with_libssh" = "yes"; then
> -- 
> 1.5.6.5
> 

> >From aece7bd89b9c5f90412b252ec339fac0d072f9a6 Mon Sep 17 00:00:00 2001
> From: Maximilian Wilhelm <max@xxxxxxxxxxx>
> Date: Thu, 30 Jul 2009 20:30:08 +0200
> Subject: [PATCH] Enable/disable LXC driver automatically.
> 
> * configure.in: Check for <sched.h> header file and availability of the
>   unshare() function within this header by performing a compile and link test.
>   This function is required for the LXC driver.
> ---
>  configure.in |   36 +++++++++++++++++++++++++++++++++++-
>  1 files changed, 35 insertions(+), 1 deletions(-)
> 
> diff --git a/configure.in b/configure.in
> index 008424c..1a326af 100644
> --- a/configure.in
> +++ b/configure.in
> @@ -194,7 +194,7 @@ AC_ARG_WITH([phyp],
>  AC_ARG_WITH([vbox],
>  [  --with-vbox             add VirtualBox support (on)],[],[with_vbox=yes])
>  AC_ARG_WITH([lxc],
> -[  --with-lxc              add Linux Container support (on)],[],[with_lxc=yes])
> +[  --with-lxc              add Linux Container support (on)],[],[with_lxc=check])
>  AC_ARG_WITH([one],
>  [  --with-one              add ONE support (on)],[],[with_one=check])
>  AC_ARG_WITH([esx],
> @@ -429,6 +429,40 @@ dnl check for kvm headers
>  dnl
>  AC_CHECK_HEADERS([linux/kvm.h])
>  
> +dnl
> +dnl check for sufficient headers for LXC
> +dnl
> +if test "$with_lxc" = "yes" -o "$with_lxc" = "check"; then
> +    AC_CHECK_HEADER([sched.h],
> +    dnl Header is there, check for unshare()
> +    [
> +        AC_TRY_LINK([#define _GNU_SOURCE
> +            #include <sched.h>], [
> +            unshare (1);
> +	], [
> +            with_lxc=yes
> +	], [
> +            if test "$with_lxc" = "check"; then
> +	        with_lxc=no
> +		AC_MSG_NOTICE([Function unshare() not present in <sched.h> header but required for LXC driver, disabling it])
> +            else
> +	        AC_MSG_ERROR([Function unshare() not present in <sched.h> header, but required for LXC driver])
> +            fi
> +
> +        ])
> +
> +    dnl Header is not there
> +    ],[
> +        if test "$with_lxc" = "check"; then
> +            with_lxc=no
> +            AC_MSG_NOTICE([Header <sched.h> not found but required for LXC driver, disabling it])
> +        else
> +            AC_MSG_ERROR([Header <sched.h> not found but required for LXC driver])
> +        fi
> +
> +    ])
> +fi
> +
>  dnl OpenNebula driver Compilation setting
>  dnl
>  
> -- 
> 1.5.6.5
> 

> >From 658d7e7ed06f7b1a672ff348a92e522dbb77d3be Mon Sep 17 00:00:00 2001
> From: Maximilian Wilhelm <max@xxxxxxxxxxx>
> Date: Thu, 30 Jul 2009 21:06:31 +0200
> Subject: [PATCH] Fixed check for inotify header and build Xen inotify regarding to the result
> 
> * configure.in: The Xen inotify code added in commit
>   1eeceaa649c6ff92baf13a4f31edb1eb0fdb5990 uses the <sys/inotify.h> header
>   but the configure script checks for <linux/inotify.h> which is a different
>   file and not used within the library.
>   Use the existance of <sys/inotify.h> to decide wether Xen inotify support
>   should be build or not.
> ---
>  configure.in |   13 +++++++++++--
>  1 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/configure.in b/configure.in
> index 1a326af..1f06c60 100644
> --- a/configure.in
> +++ b/configure.in
> @@ -180,7 +180,7 @@ dnl Allow to build without Xen, QEMU/KVM, test or remote driver
>  AC_ARG_WITH([xen],
>  [  --with-xen              add XEN support (on)],[],[with_xen=yes])
>  AC_ARG_WITH([xen-inotify],
> -[  --with-xen-inotify      add XEN inotify support (on)],[],[with_xen_inotify=yes])
> +[  --with-xen-inotify      add XEN inotify support (on)],[],[with_xen_inotify=check])
>  AC_ARG_WITH([qemu],
>  [  --with-qemu             add QEMU/KVM support (on)],[],[with_qemu=yes])
>  AC_ARG_WITH([uml],
> @@ -409,7 +409,16 @@ if test "$with_xen" != "yes"; then
>      with_xen_inotify=no
>  fi
>  if test "$with_xen_inotify" != "no"; then
> -    AC_CHECK_HEADER([linux/inotify.h],[],[with_xen_inotify=no])
> +    AC_CHECK_HEADER([sys/inotify.h], [
> +        with_xen_inotify=yes
> +    ], [
> +        if test "$with_xen_inotify" = "check"; then
> +            with_xen_inotify=no
> +            AC_MSG_NOTICE([Header file <sys/inotify.h> is required for Xen Inotify support, disabling it])
> +        else
> +            AC_MSG_ERROR([Header file <sys/inotify.h> is required for Xen Inotify support!])
> +        fi
> +    0])
>  fi
>  if test "$with_xen_inotify" = "yes"; then
>      AC_DEFINE_UNQUOTED([WITH_XEN_INOTIFY], 1,[whether Xen inotify sub-driver is enabled])
> -- 
> 1.5.6.5
> 

Daniel
-- 
|: Red Hat, Engineering, London   -o-   http://people.redhat.com/berrange/ :|
|: http://libvirt.org  -o-  http://virt-manager.org  -o-  http://ovirt.org :|
|: http://autobuild.org       -o-         http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505  -o-  F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|

--
Libvir-list mailing list
Libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list

[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]