This is the first step in getting rid of the assumption that
isa-serial is the default target type for serial devices.
Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx>
Reviewed-by: Pavel Hrdina <phrdina@xxxxxxxxxx>
---
src/conf/domain_conf.c | 8 +++++---
src/conf/domain_conf.h | 3 ++-
src/qemu/qemu_command.c | 13 +++++++++++++
src/qemu/qemu_domain.c | 21 +++++++++++++++++++++
src/qemu/qemu_domain_address.c | 1 +
5 files changed, 42 insertions(+), 4 deletions(-)
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 20a4acd74..321ee6a0f 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -448,6 +448,7 @@ VIR_ENUM_IMPL(virDomainChrDeviceState, VIR_DOMAIN_CHR_DEVICE_STATE_LAST,
VIR_ENUM_IMPL(virDomainChrSerialTarget,
VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_LAST,
+ "none",
"isa-serial",
"usb-serial",
"pci-serial")
@@ -4016,7 +4017,7 @@ virDomainDefAddConsoleCompat(virDomainDefPtr def)
/* modify it to be a serial port */
def->serials[0]->deviceType = VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL;
- def->serials[0]->targetType = VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA;
+ def->serials[0]->targetType = VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE;
def->serials[0]->target.port = 0;
} else {
/* if the console source doesn't match */
@@ -4040,7 +4041,8 @@ virDomainDefAddConsoleCompat(virDomainDefPtr def)
def->serials[0]->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL) {
switch ((virDomainChrSerialTargetType) def->serials[0]->targetType) {
- case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA: {
+ case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA:
+ case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE: {
/* Create a stub console to match the serial port.
* console[0] either does not exist
@@ -11481,7 +11483,7 @@ virDomainChrDefaultTargetType(int devtype)
return VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE;
case VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL:
- return VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA;
+ return VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE;
case VIR_DOMAIN_CHR_DEVICE_TYPE_PARALLEL:
case VIR_DOMAIN_CHR_DEVICE_TYPE_LAST:
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index cb8701dd2..9b88bf19d 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -1081,7 +1081,8 @@ typedef enum {
} virDomainChrDeviceType;
typedef enum {
- VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA = 0,
+ VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE = 0,
+ VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA,
VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_USB,
VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_PCI,
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 216a4bdfe..d534bc8ad 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -9166,6 +9166,14 @@ qemuChrIsPlatformDevice(const virDomainDef *def,
return true;
}
+ /* If we got all the way here and we're still stuck with the default
+ * target type for a serial device, it means we have no clue what kind of
+ * device we're talking about and we must treat it as a platform device. */
+ if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL &&
+ chr->targetType == VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE) {
+ return true;
+ }
+
return false;
}
@@ -10314,7 +10322,12 @@ qemuBuildSerialChrDeviceStr(char **deviceStr,
}
break;
+ case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE:
case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_LAST:
+ /* Except from _LAST, which is just a guard value and will never
+ * be used, all of the above are platform devices, which means
+ * qemuBuildSerialCommandLine() will have taken the appropriate
+ * branch and we will not have ended up here. */
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("Invalid target type for serial device"));
goto error;
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index c6ba4079d..b60c374d9 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -4049,6 +4049,27 @@ qemuDomainChrDefPostParse(virDomainChrDefPtr chr,
chr->targetType = VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_VIRTIO;
}
+ /* Historically, isa-serial and the default matched, so in order to
+ * maintain backwards compatibility we map them here. The actual default
+ * will be picked below based on the architecture and machine type. */
+ if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL &&
+ chr->targetType == VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA) {
+ chr->targetType = VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE;
+ }
+
+ /* Set the default serial type */
+ if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL &&
+ chr->targetType == VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE) {
+ if (ARCH_IS_X86(def->os.arch)) {
+ chr->targetType = VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA;
+ } else if (qemuDomainIsPSeries(def)) {
+ /* Setting TYPE_ISA here is just a temporary hack to reduce test
+ * suite churn. Later on we will have a proper serial type for
+ * pSeries and this line will be updated accordingly. */
+ chr->targetType = VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA;
+ }
+ }
+
/* clear auto generated unix socket path for inactive definitions */
if (parseFlags & VIR_DOMAIN_DEF_PARSE_INACTIVE) {
if (qemuDomainChrDefDropDefaultPath(chr, driver) < 0)
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 7f4ac0f45..989c0e6c9 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -782,6 +782,7 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA:
case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_USB:
+ case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE:
case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_LAST:
return 0;
}
--
2.14.3
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
