Hi,
I am trying to get libvirt to manage a KVM virtual machine on Debian squeeze
with multiple relevant parts included form unstable (because of need for gpt
partition tables, Intel 82576 nic etc).
Unfortunately the VM does not seem to boot. I will see a quemu prompt on
/dev/pts/1. (Tried pressing c on it, but no difference). Nothing will appear on
/dev/pts/2, /dev/pts/3 or when I type
virsh console vm1_storage.
If I grab the kvm command line generated by libvirt using ps and run it
manually, it works fine. (Starts booting after I press c on /dev/pts/1 or
remove the -S option from the command line)
Libvirt configuration file:
<domain type='kvm'>
<name>vm1_storage</name>
<uuid>29bfac01-b24d-e4ab-e741-f33f7e880d9d</uuid>
<memory>4096000</memory>
<currentMemory>4096000</currentMemory>
<vcpu>6</vcpu>
<os>
<type>hvm</type>
<kernel>/boot/vmlinuz-2.6.30-1-amd64</kernel>
<initrd>/boot/initrd.img-2.6.30-1-amd64</initrd>
<cmdline>"root=UUID=98d6d3d7-3782-4f6b-a94f-bc0272c0289d ro console=tty0
console=ttyS0,115200n8"</cmdline>
</os>
<features>
<acpi/>
<pae/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/bin/kvm</emulator>
<disk type='block' device='disk'>
<source dev='/dev/vm_lvm/vm01_storage_root'/>
<target dev='vda' bus='virtio'/>
</disk>
<interface type='ethernet'>
<mac address='52:54:00:12:34:56'/>
<target dev='tap0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target port='0'/>
</console>
</devices>
</domain>
KVM command line that I see in ps after running
virsh define /etc/libvirt/qemu/vm1_storage.xml
virsh start vm1_storage
(Works fine after I remove the -S option or press 'c' on quemu monitor on
/dev/pts/1):
/usr/bin/kvm -S -M pc -m 4000 -smp 6 -name vm1_storage -uuid
29bfac01-b24d-e4ab-e741-f33f7e880d9d -nographic -monitor pty -boot c -kernel
/boot/vmlinuz-2.6.30-1-amd64 -initrd /boot/initrd.img-2.6.30-1-amd64 -append
"root=UUID=98d6d3d7-3782-4f6b-a94f-bc0272c0289d ro console=tty0
console=ttyS0,115200n8" -drive
file=/dev/vm_lvm/vm01_storage_root,if=virtio,index=0,boot=on -net
nic,macaddr=52:54:00:12:34:56,vlan=0 -net tap,ifname=tap0,vlan=0 -serial pty
-parallel none -usb
/var/log/libvirt/qemu/vm1_storage.log shows:
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
HOME=/ /usr/bin/kvm -S -M pc -m 4000 -smp 6 -name vm1_storage -uuid
29bfac01-b24d-e4ab-e741-f33f7e880d9d -nographic -monitor pty -boot c -kernel
/boot/vmlinuz-2.6.30-1-amd64 -initrd /boot/initrd.img-2.6.30-1-amd64 -append
"root=UUID=98d6d3d7-3782-4f6b-a94f-bc0272c0289d ro console=tty0
console=ttyS0,115200n8" -drive
file=/dev/vm_lvm/vm01_storage_root,if=virtio,index=0,boot=on -net
nic,macaddr=52:54:00:12:34:56,vlan=0 -net tap,ifname=tap0,vlan=0 -serial pty
-parallel none -usb
char device redirected to /dev/pts/1
char device redirected to /dev/pts/2
qemu: loading initrd (0x76055b bytes) at 0x000000007f89f000
Versions in use:
kvm 85+dfsg-4
libvirt0 0.6.5-2
libvirt-bin 0.6.5-2
linux-image-2.6.30-1-amd64
Thanks for any ideas.
--
Libvir-list mailing list
Libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list