Re: [PATCH v3] Add support for Veritas HyperScale (VxHS) block device protocol

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I'm trying to figure out what changes are needed in the libvirt vxhs
patch to support passing TLS X509 arguments to qemu, similar to the
following -

Sample QEMU command line passing TLS credentials to the VxHS block
device (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'

I was hoping to find some NBD code related to this, but not able to
locate it. Any pointers will be appreciated.

Thanks,
Ashish

On Wed, Feb 1, 2017 at 8:36 AM, John Ferlan <jferlan@xxxxxxxxxx> wrote:
> [...]
> Pressed send too soon, sigh.
>
>
>>>>
>>>> #1. Based on Peter's v2 comments, we don't want to support the
>>>> older/legacy syntax for VxHS, so it's something that should be removed -
>>>> although we should check for it being present and fail if found.
>>>>
>>>
>>> I am testing with changed code to return error if legacy syntax is
>>> found for VxHS. Also added a test case to check for failure on legacy
>>> syntax and it seems to pass (test #41 below).
>>>
>>> Then I added a pass test case to check conversion from new native
>>> syntax to XML (test #40 below). That test fails with error
>>> 'qemuParseCommandLineDisk:901 : internal error: missing file parameter
>>> in drive 'file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b...'
>>
>> The qemu_parse_command.c changes while nice to have weren't even updated
>> when multiple gluster servers were added (e.g. commit id '' or '7b7da9e28')
>> Check the changes to add the new s
>>
>> IOW: This code knows how to parse something like:
>>
>> -drive
>> 'file=gluster+unix:///Volume2/Image?socket=/path/to/sock,format=raw,if=none,id=drive-virtio-disk1'
>>
>> but it's clueless for:
>>
>> -drive file.driver=gluster,file.volume=Volume3,file.path=/Image.qcow2,\
>> file.server.0.type=tcp,file.server.0.host=example.org,file.server.0.port=6000,\
>> file.server.1.type=tcp,file.server.1.host=example.org,file.server.1.port=24007,\
>> file.server.2.type=unix,file.server.2.socket=/path/to/sock,format=qcow2,\
>> if=none,id=drive-virtio-disk2 \
>> -device virtio-blk-pci,bus=pci.0,addr=0x5,drive=drive-virtio-disk2,\
>> id=virtio-disk2
>>
>> See
>>>
>>> Looks like none of the existing tests in qemuargv2xmltest test for the
>>> parsing of new syntax, and qemuParseCommandLineDisk() expects to find
>>> 'file=' for a drive or it errors out. If this is true, will it be able
>>> to parse the new syntax? Some help here please!
>
> So I wouldn't expect the VxHS code to be able to do that unless you
> wanted to be adventurous.  The good news is that this code is primarily
> for developers that need to take a qemu command line to generate the
> libvirt syntax. It has not really been kept up to date with all the most
> recent command line changes. I started to try over a year ago, but got
> very side tracked.
>
>>>
>>> Output from the newly added test cases (40 should pass and 41 checks
>>> for error) :
>>>
>>> 40) QEMU ARGV-2-XML disk-drive-network-vxhs
>>> ... Got unexpected warning from qemuParseCommandLineString:
>>> 2017-01-28 00:57:30.814+0000: 10391: info : libvirt version: 3.0.0
>>> 2017-01-28 00:57:30.814+0000: 10391: info : hostname: localhost.localdomain
>>> 2017-01-28 00:57:30.814+0000: 10391: error :
>>> qemuParseCommandLineDisk:901 : internal error: missing file parameter
>>> in drive 'file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,file.server.host=192.168.0.1,file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none'
>>> libvirt: QEMU Driver error : internal error: missing file parameter in
>>> drive 'file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,file.server.host=192.168.0.1,file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none'
>>> FAILED
>>>
>>> 41) QEMU ARGV-2-XML disk-drive-network-vxhs-fail
>>> ... Got expected error from qemuParseCommandLineString:
>>> libvirt: QEMU Driver error : internal error: VxHS protocol does not
>>> support URI syntax
>>> 'vxhs://192.168.0.1:9999/eb90327c-8302-4725-9e1b-4e85ed4dc251'
>>> OK
>>> 42) QEMU ARGV-2-XML disk-usb                                          ... OK
>>>
>>>
>>>
>>>> #2. Is the desire to ever support more than 1 host? If not, then is the
>>>> "server" syntax you've borrowed from the Gluster code necessary? Could
>>>> you just go with the single "host" like NBD and SSH. As it relates to
>>>> the qemu command line - I'm not quite as clear. From the example I see
>>>> in commit id '7b7da9e28', the gluster syntax would have:
>>>>
>>>
>>> Present understanding is to have only one host. You are right, the
>>> "server" part is not necessary. Will have to check with the qemu
>>> community on this change.
>>>
>>>> +file.server.0.type=tcp,file.server.0.host=example.org,file.server.0.port=6000,\
>>>> +file.server.1.type=tcp,file.server.1.host=example.org,file.server.1.port=24007,\
>>>> +file.server.2.type=unix,file.server.2.socket=/path/to/sock,format=qcow2,\
>>>>
>>>> whereas, the VxHS syntax is:
>>>>  +file.server.host=192.168.0.1,file.server.port=9999,format=raw,if=none,\
>>>>
>>>> FWIW: I also note there is no ".type=tcp" in your output - so perhaps
>>>> the "default" is tcp unless otherwise specified, but I'm sure of the
>>>> qemu syntax requirements in this area. I assume that since there's only
>>>> 1 server, the ".0, .1, .2" become unnecessary (something added by commit
>>>> id 'f1bbc7df4' for multiple gluster hosts).
>>>>
>>>
>>> That's correct. TCP is the default.
>>>
>>>> I haven't closedly followed the qemu syntax discussion, but it would it
>>>> would be possible to use:
>>>>
>>>> +file.host=192.168.0.1,file.port=9999
>>>>
>>>
>>> That is correct. Above syntax would also work for us. I will pose this
>>> suggestion to the qemu community and update with their response.
>>>
>
> It's not that important... I was looking for a simplification and
> generation of only what's required. You can continue using the server
> syntax - perhaps just leave a note/comment in the code indicating the
> decision point and move on.
>
> [...]
>
> John

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]
  Powered by Linux