On Tue, 7 Feb 2017 17:26:51 +0100
Erik Skultety <eskultet@xxxxxxxxxx> wrote:
> On Mon, Feb 06, 2017 at 09:33:14AM -0700, Alex Williamson wrote:
> > On Mon, 6 Feb 2017 13:19:42 +0100
> > Erik Skultety <eskultet@xxxxxxxxxx> wrote:
> >
> > > Finally. It's here. This is the initial suggestion on how libvirt might
> > > interract with the mdev framework, currently only focussing on the non-managed
> > > devices, i.e. those pre-created by the user, since that will be revisited once
> > > we all settled on how the XML should look like, given we might not want to use
> > > the sysfs path directly as an attribute in the domain XML. My proposal on the
> > > XML is the following:
> > >
> > > <hostdev mode='subsystem' type='mdev'>
> > > <source>
> > > <!-- this is the host's physical device address -->
> > > <address domain='0x0000' bus='0x00' slot='0x00' function='0x00'>
> > > <uuid>vGPU_UUID<uuid>
> > > <source>
> > > <!-- target PCI address can be omitted to assign it automatically -->
> > > </hostdev>
> > >
> > > So the mediated device is identified by the physical parent device visible on
> > > the host and a UUID which allows us to construct the sysfs path by ourselves,
> > > which we then put on the QEMU's command line.
> >
> > Based on your test code, I think you're creating something like this:
> >
> > -device vfio-pci,sysfsdev=/sys/class/mdev_bus/0000:00:03.0/53764d0e-85a0-42b4-af5c-2046b460b1dc
> >
> > That would explain the need for the parent device address, but that's
> > an entirely self inflicted requirement. For a managed="no" scenarios,
> > we shouldn't need the parent, we can get to the mdev device
> > via /sys/bus/mdev/devices/53764d0e-85a0-42b4-af5c-2046b460b1dc. So it
>
> True, for managed="no" would this path be a nice optimization.
>
> > seems that the UUID should be the only required source element for
> > managed="no".
> >
> > For managed="yes", it seems like the parent device is still an optional
>
> The reason I went with the parent address element (and purposely neglecting the
> sample mtty driver) was that I assumed any modern mdev capable HW would be
> accessible through the PCI bus on the host. Also I wanted to explicitly hint
> libvirt as much as possible which parent device a vGPU device instance should
> be created on in case there are more than one of them, rather then scanning
> sysfs for a suitable parent which actually supports the given vGPU type.
>
> > field. The most important thing that libvirt needs to know when
> > creating a mdev device for a VM is the mdev type name. The parent
> > device should be an optional field to help higher level management
> > tools deal with placement of the device for locality or load balancing.
> > Also, we can't assume that the parent device is a PCI device, the
> > sample mtty driver already breaks this assumption.
>
> Since we need to assume non-PCI devices and we still need to enable management
> to hint libvirt about the parent to utilize load balancing and stuff, I've come
> up with the following adjustments/ideas on how to reflect that in the XML:
> - still use the address element but use it with the 'type' attribute [1] (still
> breaks the sample mtty driver though) while making the element truly optional
> if I'm going to be outvoted in favor of scanning the directory for a suitable
> parent device on our own, rather than requiring the user to provide that
>
> - providing either an attribute or a standalone element for the parent device
> name, like a string version of the PCI address or whatever form the parent
> device comes in (doesn't break the mtty driver but I don't quite like this)
>
> - providing a path element/attribute to sysfs pointing to the parent device
> which I'm afraid is what Daniel is not in favor of libvirt doing
>
> So, this is what I've so far come up with in terms of hinting libvirt about the
> parent device, do you have any input on this, maybe some more ideas on how we
> should identify the parent device?
IMO, if we cannot account for the mtty sample driver, we're doing it
wrong. I suppose we can leave it unspecified how one selects a parent
device for the mtty driver, but it should be possible to expand the
syntax to include it. So I think that means that when the parent
address is provided, the parent address type needs to be specified as
PCI. So...
<hostdev mode='subsystem' type='mdev'>
This needs to encompass the device API or else the optional VM address
cannot be resolved. Perhaps model='vfio-pci' here? Seems similar to
how we specify the device type for PCI controllers where we have
multiple options:
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
For managed='no', I don't see that anything other than the mdev UUID is
useful.
<uuid>MDEV_UUID</uuid>
If libvirt gets into the business of creating mdev devices and we call
that managed='yes', then the mdev type to create is required. I don't
know whether there's anything similar we can steal syntax from:
<type>"nvidia-11"</type>
That's pretty horrible, needs some xml guru love.
We need to provide for specifying a parent, but we can't assume the
type and address format of the parent. If we say the parent is a
string, then we don't care, libvirt simply matches
the /sys/clas/mdev_bus/$STRING/ device. If we want libvirt to
interpret the parent address (I can't figure what value this adds, but
aiui raw strings are frowned upon), then the address type would need to
be specified. So instead of:
<address domain='0x0000' bus='0x00' slot='0x00' function='0x00'>
Perhaps:
<address type='pci' domain='0x0000' bus='0x00'...>
If we want to support mtty here, we'd need a different type, but at
least we have the possibility to define that (though if parent is
simply a string then even mtty works).
<source>
The type of the optional <address> here would be based on the "model"
of the hostdev.
</hostdev>
Clearly I'm less than a novice at defining xml tags, this is just what
I think needs to be there.
> > Also, grep'ing through the patches, I don't see that the "device_api"
>
> Yep, this was also on purpose since as you write below, right now the only
> functioning mdev devices we have to work with are vfio-pci capable only, so
> with this RFC I wanted to gather some feedback on whether I'm moving the right
> direction in the first place. So yeah, I thought this could be added at any point
> later.
Hmm, I think that might be painting us into a corner for the future.
> [1] http://libvirt.org/formatdomain.html#elementsAddress
I see here that we already do the <address type='pci'...> thing, so
using that as the parent source element fits.
The VM <address> though is optional, so we can't rely on queues from
that to tell us what mdev type to expect, which implies we do need
something like the model='vfio-pci' to determine the VM address format.
Thanks,
Alex
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
