On Wed, Jan 11, 2017 at 04:28:25PM +0800, Longpeng(Mike) wrote:
This patch implements support for the virtio-crypto-pci device
and the builtin backend in qemu.
Two capabilities bits are added to track support for those:
QEMU_CAPS_DEVICE_VIRTIO_CRYPTO - for the device support and
QEMU_CAPS_OBJECT_CRYPTO_BUILTIN - for the backend support.
qemu is invoked with these additional parameters if the device
id enabled:
(to add the backend)
-object cryptodev-backend-builtin,id=objcrypto0,queues=1
(to add the device)
-device virtio-crypto-pci,cryptodev=objcrypto0,id=crypto0
Signed-off-by: Longpeng(Mike) <longpeng2@xxxxxxxxxx>
---
src/conf/domain_conf.c | 4 +-
src/qemu/qemu_alias.c | 20 +++++++
src/qemu/qemu_alias.h | 3 +
src/qemu/qemu_capabilities.c | 4 ++
src/qemu/qemu_capabilities.h | 2 +
src/qemu/qemu_command.c | 132 +++++++++++++++++++++++++++++++++++++++++
src/qemu/qemu_command.h | 3 +
src/qemu/qemu_domain_address.c | 26 +++++++-
8 files changed, 191 insertions(+), 3 deletions(-)
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index ef44930..cf77af5 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -12595,7 +12595,7 @@ virDomainCryptoDefParseXML(xmlNodePtr node,
if (virDomainDeviceInfoParseXML(node, NULL, &def->info, flags) < 0)
goto error;
-cleanup:
+ cleanup:
VIR_FREE(model);
VIR_FREE(backend);
VIR_FREE(queues);
@@ -12603,7 +12603,7 @@ cleanup:
ctxt->node = save;
return def;
-error:
+ error:
Make sure you run make check and make syntax check after *every* patch. Otherwise we end up with hunks like this that clearly don't belong here.
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index d459f8e..afebe69 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -5787,6 +5787,135 @@ qemuBuildRNGCommandLine(virLogManagerPtr logManager,
static char *
+qemuBuildCryptoBackendStr(virDomainCryptoDefPtr crypto,
+ virQEMUCapsPtr qemuCaps)
+{
+ const char *type = NULL;
+ char *alias = NULL;
+ char *queue = NULL;
+ char *ret = NULL;
+ virBuffer buf = VIR_BUFFER_INITIALIZER;
+
+ if (virAsprintf(&alias, "obj%s", crypto->info.alias) < 0)
+ goto cleanup;
+
+ if (crypto->queues > 0) {
+ if (virAsprintf(&queue, "queues=%u", crypto->queues) < 0)
+ goto cleanup;
+ }
+
+ switch ((virDomainCryptoBackend)crypto->backend) {
+ case VIR_DOMAIN_CRYPTO_BACKEND_BUILTIN:
+ if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_OBJECT_CRYPTO_BUILTIN)) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("this qemu doesn't support the builtin backend"));
+ goto cleanup;
+ }
+
+ type = "cryptodev-backend-builtin";
+ break;
+
+ case VIR_DOMAIN_CRYPTO_BACKEND_LAST:
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("unknown crypto backend"));
+ goto cleanup;
+ }
+
+ if (queue)
+ virBufferAsprintf(&buf, "%s,id=%s,%s", type, alias, queue);
+ else
+ virBufferAsprintf(&buf, "%s,id=%s", type, alias);
+
+ ret = virBufferContentAndReset(&buf);
The advantage of using buffer is that you can act on it multiple times. If you just want one asprintf, you can just do virAsprintf instead. But in this case I would just append every parameter as you go.
+
+ cleanup:
+ VIR_FREE(alias);
+ return ret;
+}
+
+
+char *
+qemuBuildCryptoDevStr(const virDomainDef *def,
+ virDomainCryptoDefPtr dev,
+ virQEMUCapsPtr qemuCaps)
+{
+ virBuffer buf = VIR_BUFFER_INITIALIZER;
+
+ if (dev->model != VIR_DOMAIN_CRYPTO_MODEL_VIRTIO ||
+ !virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIRTIO_CRYPTO)) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("this qemu doesn't support crypto device model '%s'"),
+ virDomainRNGModelTypeToString(dev->model));
+ goto error;
+ }
+
+ if (dev->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("unsupported address type %s for virtio crypto device"),
+ virDomainDeviceAddressTypeToString(dev->info.type));
+ goto error;
+ }
+
+ virBufferAsprintf(&buf, "virtio-crypto-pci,cryptodev=obj%s,id=%s",
+ dev->info.alias, dev->info.alias);
+
+ if (qemuBuildDeviceAddressStr(&buf, def, &dev->info, qemuCaps) < 0)
+ goto error;
+
+ if (virBufferCheckError(&buf) < 0)
+ goto error;
+
This ^^ is pointless since this vv will return NULL and not leak either.
+ return virBufferContentAndReset(&buf);
+
+ error:
+ virBufferFreeAndReset(&buf);
+ return NULL;
+}
+
+
+static int
+qemuBuildCryptoCommandLine(virCommandPtr cmd,
+ const virDomainDef *def,
+ virQEMUCapsPtr qemuCaps)
+{
+ size_t i;
+
+ for (i = 0; i < def->ncryptos; i++) {
+ virDomainCryptoDefPtr crypto = def->cryptos[i];
+ char *tmp;
+
+ if (qemuAssignDeviceCryptoAlias(def, crypto)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("crypto device assign alias faile"));
+ return -1;
+ }
+
+ if (!crypto->info.alias) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("crypto device is missing alias"));
+ return -1;
+ }
+
+ /* add the Crypto backend */
I see you keep calling it Crypto (with uppercase 'C'). It's OK here, but shouldn't be in the middle of the sentence in a documentation, for example.
+ if (!(tmp = qemuBuildCryptoBackendStr(crypto, qemuCaps)))
+ return -1;
+
+ virCommandAddArgList(cmd, "-object", tmp, NULL);
+ VIR_FREE(tmp);
+
+ /* add the device */
+ if (!(tmp = qemuBuildCryptoDevStr(def, crypto, qemuCaps)))
+ return -1;
+
+ virCommandAddArgList(cmd, "-device", tmp, NULL);
+ VIR_FREE(tmp);
+ }
+
+ return 0;
+}
+
+
+static char *
qemuBuildSmbiosBiosStr(virSysinfoBIOSDefPtr def)
{
virBuffer buf = VIR_BUFFER_INITIALIZER;
@@ -9793,6 +9922,9 @@ qemuBuildCommandLine(virQEMUDriverPtr driver,
if (qemuBuildRNGCommandLine(logManager, cmd, cfg, def, qemuCaps) < 0)
goto error;
+ if (qemuBuildCryptoCommandLine(cmd, def, qemuCaps) < 0)
+ goto error;
+
if (qemuBuildNVRAMCommandLine(cmd, def, qemuCaps) < 0)
goto error;
diff --git a/src/qemu/qemu_command.h b/src/qemu/qemu_command.h
index 3bcfdc6..9b49ccd 100644
--- a/src/qemu/qemu_command.h
+++ b/src/qemu/qemu_command.h
@@ -201,6 +201,9 @@ char *qemuBuildShmemDevStr(virDomainDefPtr def,
virQEMUCapsPtr qemuCaps)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3);
+char *qemuBuildCryptoDevStr(const virDomainDef *def,
+ virDomainCryptoDefPtr dev,
+ virQEMUCapsPtr qemuCaps);
#endif /* __QEMU_COMMAND_H__*/
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index e17476a..62bbd1c 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -331,6 +331,12 @@ qemuDomainPrimeVirtioDeviceAddresses(virDomainDefPtr def,
def->rngs[i]->info.type = type;
}
+ for (i = 0; i < def->ncryptos; i++) {
+ if (def->cryptos[i]->model == VIR_DOMAIN_CRYPTO_MODEL_VIRTIO &&
+ def->cryptos[i]->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
+ def->cryptos[i]->info.type = type;
+ }
+
if (type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) {
for (i = 0; i < def->nfss; i++) {
if (def->fss[i]->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
@@ -727,6 +733,15 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
return 0;
}
+ case VIR_DOMAIN_DEVICE_CRYPTO:
+ switch ((virDomainCryptoModel) dev->data.crypto->model) {
+ case VIR_DOMAIN_CRYPTO_MODEL_VIRTIO:
+ return virtioFlags;
+
+ case VIR_DOMAIN_RNG_MODEL_LAST:
+ return 0;
+ }
+
case VIR_DOMAIN_DEVICE_VIDEO:
switch ((virDomainVideoType) dev->data.video->type) {
case VIR_DOMAIN_VIDEO_TYPE_VIRTIO:
@@ -784,7 +799,6 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
case VIR_DOMAIN_DEVICE_LEASE:
case VIR_DOMAIN_DEVICE_GRAPHICS:
case VIR_DOMAIN_DEVICE_IOMMU:
- case VIR_DOMAIN_DEVICE_CRYPTO:
case VIR_DOMAIN_DEVICE_LAST:
case VIR_DOMAIN_DEVICE_NONE:
return 0;
Oh, here it is, why didn't you put it here right away? Oh, because now this patch implements this device. Well, that's a way to do it, OK.
@@ -1770,6 +1784,16 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
goto error;
}
+ /* VirtIO CRYPTO */
+ for (i = 0; i < def->ncryptos; i++) {
+ if (def->cryptos[i]->model != VIR_DOMAIN_CRYPTO_MODEL_VIRTIO ||
+ !virDeviceInfoPCIAddressWanted(&def->cryptos[i]->info))
+ continue;
+
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->cryptos[i]->info) < 0)
+ goto error;
+ }
+
/* A watchdog - check if it is a PCI device */
if (def->watchdog &&
def->watchdog->model == VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB &&
--
1.8.3.1
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
Attachment:
signature.asc
Description: Digital signature
-- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list
