virNetDevTapCreateInBridgePort() has always set the new tap device to
the current MTU of the bridge it's being attached to. There is one
case where we will want to set the new tap device to a different
(usually larger) MTU - if that's done with the very first device added
to the bridge, the bridge's MTU will be set to the device's MTU. This
patch allows for that possibility by adding "int mtu" to the arg list
for virNetDevTapCreateInBridgePort(), but all callers are sending -1,
so it doesn't yet have any effect.
Since the requested MTU isn't necessarily what is used in the end (for
example, if there is no MTU requested, the tap device will be set to
the current MTU of the bridge), and the hypervisor may want to know
the actual MTU used, we also return the actual MTU to the caller (if
actualMTU is non-NULL).
---
Change from V1:
* in addition to sending in a requested MTU, return the MTU that was
actually set on the device (so that it can be sent to qemu with
host_mtu option)
src/bhyve/bhyve_command.c | 1 +
src/network/bridge_driver.c | 1 +
src/qemu/qemu_interface.c | 1 +
src/uml/uml_conf.c | 1 +
src/util/virnetdevtap.c | 32 +++++++++++++++++++++++++++-----
src/util/virnetdevtap.h | 2 ++
tests/bhyvexml2argvmock.c | 2 ++
7 files changed, 35 insertions(+), 5 deletions(-)
diff --git a/src/bhyve/bhyve_command.c b/src/bhyve/bhyve_command.c
index 8a29977..4c076c2 100644
--- a/src/bhyve/bhyve_command.c
+++ b/src/bhyve/bhyve_command.c
@@ -78,6 +78,7 @@ bhyveBuildNetArgStr(const virDomainDef *def,
def->uuid, NULL, NULL, 0,
virDomainNetGetActualVirtPortProfile(net),
virDomainNetGetActualVlan(net),
+ 0, NULL,
VIR_NETDEV_TAP_CREATE_IFUP | VIR_NETDEV_TAP_CREATE_PERSIST) < 0) {
goto cleanup;
}
diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
index 7d340ef..f88c261 100644
--- a/src/network/bridge_driver.c
+++ b/src/network/bridge_driver.c
@@ -2301,6 +2301,7 @@ networkStartNetworkVirtual(virNetworkDriverStatePtr driver,
if (virNetDevTapCreateInBridgePort(network->def->bridge,
&macTapIfName, &network->def->mac,
NULL, NULL, &tapfd, 1, NULL, NULL,
+ 0, NULL,
VIR_NETDEV_TAP_CREATE_USE_MAC_FOR_BRIDGE |
VIR_NETDEV_TAP_CREATE_IFUP |
VIR_NETDEV_TAP_CREATE_PERSIST) < 0) {
diff --git a/src/qemu/qemu_interface.c b/src/qemu/qemu_interface.c
index 455c2d0..ce448d2 100644
--- a/src/qemu/qemu_interface.c
+++ b/src/qemu/qemu_interface.c
@@ -544,6 +544,7 @@ qemuInterfaceBridgeConnect(virDomainDefPtr def,
def->uuid, tunpath, tapfd, *tapfdSize,
virDomainNetGetActualVirtPortProfile(net),
virDomainNetGetActualVlan(net),
+ 0, NULL,
tap_create_flags) < 0) {
virDomainAuditNetDevice(def, net, tunpath, false);
goto cleanup;
diff --git a/src/uml/uml_conf.c b/src/uml/uml_conf.c
index 6754d3c..4663c7d 100644
--- a/src/uml/uml_conf.c
+++ b/src/uml/uml_conf.c
@@ -126,6 +126,7 @@ umlConnectTapDevice(virDomainDefPtr vm,
vm->uuid, net->backend.tap, &tapfd, 1,
virDomainNetGetActualVirtPortProfile(net),
virDomainNetGetActualVlan(net),
+ 0, NULL,
VIR_NETDEV_TAP_CREATE_IFUP |
VIR_NETDEV_TAP_CREATE_PERSIST) < 0) {
if (template_ifname)
diff --git a/src/util/virnetdevtap.c b/src/util/virnetdevtap.c
index 85c0045..41e68f4 100644
--- a/src/util/virnetdevtap.c
+++ b/src/util/virnetdevtap.c
@@ -513,6 +513,8 @@ int virNetDevTapDelete(const char *ifname ATTRIBUTE_UNUSED,
* @tapfd: array of file descriptor return value for the new tap device
* @tapfdSize: number of file descriptors in @tapfd
* @virtPortProfile: bridge/port specific configuration
+ * @mtu: requested MTU for port (or 0 for "default")
+ * @actualMTU: MTU actually set for port (after accounting for bridge's MTU)
* @flags: OR of virNetDevTapCreateFlags:
* VIR_NETDEV_TAP_CREATE_IFUP
@@ -543,6 +545,8 @@ int virNetDevTapCreateInBridgePort(const char *brname,
size_t tapfdSize,
virNetDevVPortProfilePtr virtPortProfile,
virNetDevVlanPtr virtVlan,
+ unsigned int mtu,
+ unsigned int *actualMTU,
unsigned int flags)
{
virMacAddr tapmac;
@@ -578,12 +582,30 @@ int virNetDevTapCreateInBridgePort(const char *brname,
if (virNetDevSetMAC(*ifname, &tapmac) < 0)
goto error;
- /* We need to set the interface MTU before adding it
- * to the bridge, because the bridge will have its
- * MTU adjusted automatically when we add the new interface.
+ /* If an MTU is specified for the new device, set it before
+ * attaching the device to the bridge, as it may affect the MTU of
+ * the bridge (in particular if it is the first device attached to
+ * the bridge, or if it is smaller than the current MTU of the
+ * bridge). If MTU isn't specified for the new device (i.e. 0),
+ * we need to set the interface MTU to the current MTU of the
+ * bridge (to avoid inadvertantly changing the bridge's MTU).
*/
- if (virNetDevSetMTUFromDevice(*ifname, brname) < 0)
- goto error;
+ if (mtu > 0) {
+ if (virNetDevSetMTU(*ifname, mtu) < 0)
+ goto error;
+ } else {
+ if (virNetDevSetMTUFromDevice(*ifname, brname) < 0)
+ goto error;
+ }
+ if (actualMTU) {
+ int retMTU = virNetDevGetMTU(*ifname);
+
+ if (retMTU < 0)
+ goto error;
+
+ *actualMTU = retMTU;
+ }
+
if (virtPortProfile) {
if (virtPortProfile->virtPortType == VIR_NETDEV_VPORT_PROFILE_MIDONET) {
diff --git a/src/util/virnetdevtap.h b/src/util/virnetdevtap.h
index 259e7c9..6441df4 100644
--- a/src/util/virnetdevtap.h
+++ b/src/util/virnetdevtap.h
@@ -71,6 +71,8 @@ int virNetDevTapCreateInBridgePort(const char *brname,
size_t tapfdSize,
virNetDevVPortProfilePtr virtPortProfile,
virNetDevVlanPtr virtVlan,
+ unsigned int mtu,
+ unsigned int *actualMTU,
unsigned int flags)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3)
ATTRIBUTE_RETURN_CHECK;
diff --git a/tests/bhyvexml2argvmock.c b/tests/bhyvexml2argvmock.c
index a851632..fd71469 100644
--- a/tests/bhyvexml2argvmock.c
+++ b/tests/bhyvexml2argvmock.c
@@ -28,6 +28,8 @@ int virNetDevTapCreateInBridgePort(const char *brname ATTRIBUTE_UNUSED,
size_t tapfdSize ATTRIBUTE_UNUSED,
virNetDevVPortProfilePtr virtPortProfile ATTRIBUTE_UNUSED,
virNetDevVlanPtr virtVlan ATTRIBUTE_UNUSED,
+ unsigned int mtu ATTRIBUTE_UNUSED,
+ unsigned int *actualMTU ATTRIBUTE_UNUSED,
unsigned int fakeflags ATTRIBUTE_UNUSED)
{
VIR_FREE(*ifname);
--
2.9.3
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
