Re: [PATCH v2] storage: vz storage pool support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/06/2016 06:10 AM, Olga Krishtal wrote:
> On 06/12/16 02:59, John Ferlan wrote:
>>
>> On 12/02/2016 12:09 PM, Olga Krishtal wrote:
>>> On 20/09/16 23:30, John Ferlan wrote:
>>>> On 07/14/2016 01:13 PM, Olga Krishtal wrote:
>>>>> This patch supports pool and volume management within Virtuozzo
>>>>> Storage.
>>>>> Virtuozzo Storage is a highly-available distributed software defined
>>>>> storage
>>>>> with built-in replication and disaster recovery. From client's
>>>>> point of
>>>>> view it looks like network attached storage (NFS or GlusterFS).
>>>>> More information about vzstorage can be found here:
>>>>> https://openvz.org/Virtuozzo_Storage
>>>>> It supports the same volume formats as directory, nfs, etc.
>>>>> Default format is raw.
>>>>>
>>>>> Signed-off-by: Olga Krishtal <okrishtal@xxxxxxxxxxxxx>
>>>>> ---
>>>>>    configure.ac                      |  31 +++++++++++
>>>>>    docs/schemas/storagepool.rng      |  29 ++++++++++
>>>>>    include/libvirt/libvirt-storage.h |   1 +
>>>>>    src/conf/storage_conf.c           |  16 +++++-
>>>>>    src/conf/storage_conf.h           |   4 +-
>>>>>    src/storage/storage_backend.c     |   3 +
>>>>>    src/storage/storage_backend_fs.c  | 112
>>>>> +++++++++++++++++++++++++++++++++++++-
>>>>>    src/storage/storage_backend_fs.h  |   3 +
>>>>>    src/storage/storage_driver.c      |   2 +
>>>>>    tools/virsh-pool.c                |   2 +
>>>>>    tools/virsh.c                     |   3 +
>>>>>    11 files changed, 203 insertions(+), 3 deletions(-)
>>>>>
>>>> In an effort to go through older on list bugs I'm wondering about the
>>>> relative importance of this compared to the fspool series.  Shall I
>>>> assume this is dropped in favor of that?
>>>>
>>>> Tks -
>>> No, we will not drop it. We want to have Virtuozzo Storage as backend
>>> for storage pool.
>>>
>> To be more specific this code is getting wired in with the 'fs' backend
>> rather than creating it's own... Don't like that.
>>
>> Similar to what I recently reviewed for the Veritas/vxfs changes - there
>> needs to be a separate storage_backend_vstorage.c in order to handle the
>> vstorage pool. Don't lump it in with the "fs" pool/backend. No different
>> than what is required for rbd, gluster, mpath, logical, disk, scsi, etc.
> 
> I thought of it first, however, after implementing some part of
> functionality -
> I saw that for vstorage backend  I need to implement only 2 callbacks:
> virStorageBackendVzStart
> virStorageBackendVzfindPoolSources
> All volume types and operations are the same as in pool/fs backend,
> Basically what we need to use storage is to find it:
> vstorage discover - finds all clusters or domain using DNS, zeroconf, etc
> Than,  we need to mount this cluster (I assume, that the authorization
> will be done before pool creation):
> vstorage-mount -c cluster-name mount_point. Then we have an access to
> this cluster as a filesystem, we
> can upload-download image files, etc.
> To avoid copy/paste of all vol-ops  and nearly half of pool-ops I've
> choosen pool/fs_backend.
> Do you still think that it is necessary to have separate backend?
> 
> 

I see what you mean; however, IMO vstorage should be separate. Maybe
there's another opinion out there, but since you're requiring
"something" else to be installed in order to get the WITH_VSTORAGE to be
set to 1, then a separate file is in order.

Not sure they're comparable, but zfs has its own. Having separated
vstorage reduces the chance that some day some incompatible logic is
added/altered in the *fs.c (or vice versa).

I think you should consider the *_fs.c code to be the "default" of
sorts. That is default file/dir structure with netfs added in. The
vstorage may just be some file system, but it's not something (yet) on
"every" distribution.

Also I forgot to mention yesterday - you need to update the
docs/formatstorage.html.in at the very least and also the storage driver
page docs/storage.html.in.

In addition there are storagepool tests (xml2xml) that would need to be
updated to validate the new storage pool type. The tests would "show"
how the pool XML would appear and validate whatever parsing has been done.

John
> 
>> Don't forget things need to be as separable as possible.  Add the pool
>> code, add the storage conf code, add the virsh code, etc.  One long
>> patch is just tough to review.
> 
> I will do splitting.
> 
>>
>>>> John
>>>>
>>>> FWIW: It compiled, but failed syntax-check.
>>> I have checked it once again - and in my case -syntax-check is passed.
>>> Can you tell me what is wrong in your case? (The patch is ok for
>>> upstream)
>>>
>> Digging around I found my old review branch (been far too long to
>> remember) - it was 571 commits old, but still able to rebase without
>> merges (that's good)... My make syntax-check returns:
>>
>>
>> preprocessor_indentation
>> cppi: src/storage/storage_backend_fs.h: line 33: not properly indented
>> cppi: src/storage/storage_backend_fs.h: line 35: not properly indented
>> maint.mk: incorrect preprocessor indentation
>> cfg.mk:684: recipe for target 'sc_preprocessor_indentation' failed
>> make: *** [sc_preprocessor_indentation] Error 1
>>
>> This is something you would see on your system because:
>>
>> #if WITH_STORAGE_VSTORAGE
>> extern virStorageBackend virStorageBackendVstorage;
>> #endif
>>
>> needs have need to change to
>>
>> # if WITH_STORAGE_VSTORAGE
>> extern virStorageBackend virStorageBackendVstorage;
>> # endif
>>
>> But it doesn't belong there anyway
> 
> Thanks a lot.
> 
>>
>>>>    Also the name "vstorage"
>>>> would seemingly be a bit too generic. I saw and thought virtual storage
>>>> not Virtuozzo Storage
>>>>
>>> All tools we use to manage Virtuozzo storage starts with vstorage*.
>>> However, I can use vzstorage instead.
>>>
>> I suppose vstorage would be OK - I'm letting you know what I thought
>> when I saw it.
>>
>> John
>>
>>>>> diff --git a/configure.ac b/configure.ac
>>>>> index 2c81c95..2ee8b8c 100644
>>>>> --- a/configure.ac
>>>>> +++ b/configure.ac
>>>>> @@ -1692,6 +1692,10 @@ AC_ARG_WITH([storage-zfs],
>>>>>      [AS_HELP_STRING([--with-storage-zfs],
>>>>>        [with ZFS backend for the storage driver
>>>>> @<:@default=check@:>@])],
>>>>>      [],[with_storage_zfs=check])
>>>>> +AC_ARG_WITH([storage-vstorage],
>>>>> +  [AS_HELP_STRING([--with-storage-vstorage],
>>>>> +    [with VZ backend for the storage driver @<:@default=check@:>@])],
>>>>> +  [],[with_storage_vstorage=check])
>>>>>      if test "$with_libvirtd" = "no"; then
>>>>>      with_storage_dir=no
>>>>> @@ -1705,6 +1709,7 @@ if test "$with_libvirtd" = "no"; then
>>>>>      with_storage_sheepdog=no
>>>>>      with_storage_gluster=no
>>>>>      with_storage_zfs=no
>>>>> +  with_storage_vstorage=no
>>>>>    fi
>>>>>    if test "$with_storage_dir" = "yes" ; then
>>>>>      AC_DEFINE_UNQUOTED([WITH_STORAGE_DIR], 1, [whether directory
>>>>> backend for storage driver is enabled])
>>>>> @@ -1963,6 +1968,31 @@ if test "$with_storage_fs" = "yes" ||
>>>>>      fi
>>>>>    fi
>>>>>    +if test "$with_storage_vstorage" = "yes" || test
>>>>> "$with_storage_vstorage" = "check"; then
>>>>> +   AC_PATH_PROG([VSTORAGE], [vstorage], [], [$PATH:/sbin:/usr/bin])
>>>>> +   AC_PATH_PROG([VSTORAGE_MOUNT], [vstorage-mount], [],
>>>>> [$PATH:/sbin/usr/bin])
>>>>> +  if test "$with_storage_vstorage" = "yes"; then
>>>>> +    if test -z "$VSTORAGE" ; then AC_MSG_ERROR([We need vstorage
>>>>> tools for virtuozzo storage driver]); fi
>>>>> +    if test -z "$VSTORAGE_MOUNT" ; then AC_MSG_ERROR([We need
>>>>> vstorage mount tool for virtuozzo storage driver]); fi
>>>>> +    if test  "$with_storage_fs" = "no"; then AC_MSG_ERROR([We need
>>>>> fs backend for vstorage pool]); fi
>>>>> +  else
>>>>> +    if test -z "$VSTORAGE" ; then with_storage_vstorage=no; fi
>>>>> +    if test -z "$VSTORAGE" ; then with_storage_vstorage=no; fi
>>>>> +    if test  "$with_storage_fs"= "no"; then
>>>>> with_storage_vstorage=no; fi
>>>>> +
>>>>> +    if test "$with_storage_vstorage" = "check" ; then
>>>>> with_storage_vstorage=yes ; fi
>>>>> +  fi
>>>>> +  if test "$with_storage_vstorage" = "yes"; then
>>>>> +      AC_DEFINE_UNQUOTED([WITH_STORAGE_VSTORAGE], 1, [whether
>>>>> virtuozzo storage backend for storage driver is enabled])
>>>>> +      AC_DEFINE_UNQUOTED([VSTORAGE], ["$VSTORAGE"], [Location or
>>>>> name of vstorage program])
>>>>> +      AC_DEFINE_UNQUOTED([VSTORAGE_MOUNT], ["$VSTORAGE_MOUNT"],
>>>>> [Location or name of vstorage-mount program])
>>>>> +      AC_DEFINE_UNQUOTED([with_storage_fs], ["$VSTORAGE_MOUNT"],
>>>>> [must be on])
>>>>> +  fi
>>>>> +
>>>>> +  if test "$with_storage_vstorage" = "check" ; then
>>>>> with_storage_vstorage=yes ; fi
>>>>> +fi
>>>>> +AM_CONDITIONAL([WITH_STORAGE_VSTORAGE], [test
>>>>> "$with_storage_vstorage" = "yes"])
>>>>> +
>>>>>    LIBPARTED_CFLAGS=
>>>>>    LIBPARTED_LIBS=
>>>>>    if test "$with_storage_disk" = "yes" ||
>>>>> @@ -2759,6 +2789,7 @@ AC_MSG_NOTICE([     RBD: $with_storage_rbd])
>>>>>    AC_MSG_NOTICE([Sheepdog: $with_storage_sheepdog])
>>>>>    AC_MSG_NOTICE([ Gluster: $with_storage_gluster])
>>>>>    AC_MSG_NOTICE([     ZFS: $with_storage_zfs])
>>>>> +AC_MSG_NOTICE([Vstorage: $with_storage_vstorage])
>>>>>    AC_MSG_NOTICE([])
>>>>>    AC_MSG_NOTICE([Security Drivers])
>>>>>    AC_MSG_NOTICE([])
>>>>> diff --git a/docs/schemas/storagepool.rng
>>>>> b/docs/schemas/storagepool.rng
>>>>> index 49d212f..8ad5616 100644
>>>>> --- a/docs/schemas/storagepool.rng
>>>>> +++ b/docs/schemas/storagepool.rng
>>>>> @@ -24,6 +24,7 @@
>>>>>            <ref name='poolsheepdog'/>
>>>>>            <ref name='poolgluster'/>
>>>>>            <ref name='poolzfs'/>
>>>>> +        <ref name='poolvstorage'/>
>>>>>          </choice>
>>>>>        </element>
>>>>>      </define>
>>>>> @@ -173,6 +174,18 @@
>>>>>        </interleave>
>>>>>      </define>
>>>>>    +  <define name='poolvstorage'>
>>>>> +     <attribute name='type'>
>>>>> +      <value>vz</value>
>>>>> +    </attribute>
>>>>> +    <interleave>
>>>>> +      <ref name='commonmetadata'/>
>>>>> +      <ref name='sizing'/>
>>>>> +      <ref name='sourcevstorage'/>
>>>>> +      <ref name='target'/>
>>>>> +    </interleave>
>>>>> +  </define>
>>>>> +
>>>>>      <define name='sourceinfovendor'>
>>>>>        <interleave>
>>>>>          <optional>
>>>>> @@ -609,6 +622,22 @@
>>>>>        </element>
>>>>>      </define>
>>>>>    +  <define name='clustername'>
>>>>> +    <interleave>
>>>>> +      <element name='name'>
>>>>> +        <ref name='genericName'/>
>>>>> +      </element>
>>>>> +    </interleave>
>>>>> +  </define>
>>>>> +
>>>>> +  <define name='sourcevstorage'>
>>>>> +    <element name='source'>
>>>>> +      <interleave>
>>>>> +        <ref name='clustername'/>
>>>>> +      </interleave>
>>>>> +    </element>
>>>>> +  </define>
>>>>> +
>>>>>      <define name='IscsiQualifiedName'>
>>>>>        <data type='string'>
>>>>>          <param
>>>>> name="pattern">iqn\.[0-9]{4}-(0[1-9]|1[0-2])\.[a-zA-Z0-9\.\-]+(:.+)?</param>
>>>>>
>>>>>
>>>>> diff --git a/include/libvirt/libvirt-storage.h
>>>>> b/include/libvirt/libvirt-storage.h
>>>>> index 0974f6e..28babf7 100644
>>>>> --- a/include/libvirt/libvirt-storage.h
>>>>> +++ b/include/libvirt/libvirt-storage.h
>>>>> @@ -232,6 +232,7 @@ typedef enum {
>>>>>        VIR_CONNECT_LIST_STORAGE_POOLS_SHEEPDOG      = 1 << 15,
>>>>>        VIR_CONNECT_LIST_STORAGE_POOLS_GLUSTER       = 1 << 16,
>>>>>        VIR_CONNECT_LIST_STORAGE_POOLS_ZFS           = 1 << 17,
>>>>> +    VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE      = 1 << 18,
>>>>>    } virConnectListAllStoragePoolsFlags;
>>>>>      int
>>>>> virConnectListAllStoragePools(virConnectPtr conn,
>>>>> diff --git a/src/conf/storage_conf.c b/src/conf/storage_conf.c
>>>>> index 05a1a49..e3c8ac1 100644
>>>>> --- a/src/conf/storage_conf.c
>>>>> +++ b/src/conf/storage_conf.c
>>>>> @@ -60,7 +60,7 @@ VIR_ENUM_IMPL(virStoragePool,
>>>>>                  "dir", "fs", "netfs",
>>>>>                  "logical", "disk", "iscsi",
>>>>>                  "scsi", "mpath", "rbd",
>>>>> -              "sheepdog", "gluster", "zfs")
>>>>> +              "sheepdog", "gluster", "zfs", "vstorage")
>>>>>      VIR_ENUM_IMPL(virStoragePoolFormatFileSystem,
>>>>>                  VIR_STORAGE_POOL_FS_LAST,
>>>>> @@ -274,6 +274,16 @@ static virStoragePoolTypeInfo poolTypeInfo[] = {
>>>>>             .defaultFormat = VIR_STORAGE_FILE_RAW,
>>>>>         },
>>>>>        },
>>>>> +    {.poolType = VIR_STORAGE_POOL_VSTORAGE,
>>>>> +     .poolOptions = {
>>>>> +        .flags = VIR_STORAGE_POOL_SOURCE_NAME,
>>>>> +     },
>>>>> +     .volOptions = {
>>>>> +        .defaultFormat = VIR_STORAGE_FILE_RAW,
>>>>> +        .formatFromString = virStorageVolumeFormatFromString,
>>>>> +        .formatToString = virStorageFileFormatTypeToString,
>>>>> +     },
>>>>> +    },
>>>>>    };
>>>>>      @@ -2588,6 +2598,10 @@
>>>>> virStoragePoolSourceFindDuplicate(virConnectPtr conn,
>>>>>                /* Only one mpath pool is valid per host */
>>>>>                matchpool = pool;
>>>>>                break;
>>>>> +        case VIR_STORAGE_POOL_VSTORAGE:
>>>>> +            if (STREQ(pool->def->source.name, def->source.name))
>>>>> +                matchpool = pool;
>>>>> +            break;
>>>>>            case VIR_STORAGE_POOL_RBD:
>>>>>            case VIR_STORAGE_POOL_LAST:
>>>>>                break;
>>>>> diff --git a/src/conf/storage_conf.h b/src/conf/storage_conf.h
>>>>> index 185ae5e..bf33b5f 100644
>>>>> --- a/src/conf/storage_conf.h
>>>>> +++ b/src/conf/storage_conf.h
>>>>> @@ -95,6 +95,7 @@ typedef enum {
>>>>>        VIR_STORAGE_POOL_SHEEPDOG, /* Sheepdog device */
>>>>>        VIR_STORAGE_POOL_GLUSTER,  /* Gluster device */
>>>>>        VIR_STORAGE_POOL_ZFS,      /* ZFS */
>>>>> +    VIR_STORAGE_POOL_VSTORAGE, /* Virtuozzo Storage */
>>>>>          VIR_STORAGE_POOL_LAST,
>>>>>    } virStoragePoolType;
>>>>> @@ -545,7 +546,8 @@ VIR_ENUM_DECL(virStoragePartedFs)
>>>>>                     VIR_CONNECT_LIST_STORAGE_POOLS_RBD      | \
>>>>>                     VIR_CONNECT_LIST_STORAGE_POOLS_SHEEPDOG | \
>>>>>                     VIR_CONNECT_LIST_STORAGE_POOLS_GLUSTER  | \
>>>>> -                 VIR_CONNECT_LIST_STORAGE_POOLS_ZFS)
>>>>> +                 VIR_CONNECT_LIST_STORAGE_POOLS_ZFS      | \
>>>>> +                 VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE)
>>>>>      # define
>>>>> VIR_CONNECT_LIST_STORAGE_POOLS_FILTERS_ALL                  \
>>>>>                   
>>>>> (VIR_CONNECT_LIST_STORAGE_POOLS_FILTERS_ACTIVE     | \
>>>>> diff --git a/src/storage/storage_backend.c
>>>>> b/src/storage/storage_backend.c
>>>>> index 97f6ffe..181d3f5 100644
>>>>> --- a/src/storage/storage_backend.c
>>>>> +++ b/src/storage/storage_backend.c
>>>>> @@ -135,6 +135,9 @@ static virStorageBackendPtr backends[] = {
>>>>>    #if WITH_STORAGE_ZFS
>>>>>        &virStorageBackendZFS,
>>>>>    #endif
>>>>> +#if WITH_STORAGE_VSTORAGE
>>>>> +    &virStorageBackendVstorage,
>>>>> +#endif
>>>>>        NULL
>>>>>    };
>>>>>    diff --git a/src/storage/storage_backend_fs.c
>>>>> b/src/storage/storage_backend_fs.c
>>>>> index 0a12ecb..b89b3ae 100644
>>>>> --- a/src/storage/storage_backend_fs.c
>>>>> +++ b/src/storage/storage_backend_fs.c
>>>>> @@ -371,7 +371,13 @@
>>>>> virStorageBackendFileSystemIsValid(virStoragePoolObjPtr pool)
>>>>>                               "%s", _("missing source path"));
>>>>>                return -1;
>>>>>            }
>>>>> -    } else {
>>>>> +    } else if (pool->def->type == VIR_STORAGE_POOL_VSTORAGE) {
>>>>> +        if (!pool->def->source.name) {
>>>>> +            virReportError(VIR_ERR_INTERNAL_ERROR,
>>>>> +                           "%s", _("missing source cluster name"));
>>>>> +            return -1;
>>>>> +        }
>>>>> +    } else{
>>>>>            if (pool->def->source.ndevice != 1) {
>>>>>                if (pool->def->source.ndevice == 0)
>>>>>                    virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
>>>>> @@ -411,6 +417,9 @@
>>>>> virStorageBackendFileSystemGetPoolSource(virStoragePoolObjPtr pool)
>>>>>                                pool->def->source.dir) < 0)
>>>>>                    return NULL;
>>>>>            }
>>>>> +    } else if (pool->def->type == VIR_STORAGE_POOL_VSTORAGE) {
>>>>> +        if (virAsprintf(&src, "vstorage://%s",
>>>>> pool->def->source.name) < 0)
>>>>> +            return NULL;
>>>>>        } else {
>>>>>            if (VIR_STRDUP(src, pool->def->source.devices[0].path) < 0)
>>>>>                return NULL;
>>>>> @@ -546,7 +555,9 @@
>>>>> virStorageBackendFileSystemMount(virStoragePoolObjPtr pool)
>>>>>        VIR_FREE(src);
>>>>>        return ret;
>>>>>    }
>>>>> +#endif /* WITH_STORAGE_FS */
>>>>>    +#if WITH_STORAGE_FS
>>>>>    /**
>>>>>     * @pool storage pool to unmount
>>>>>     *
>>>>> @@ -1654,3 +1665,102 @@ virStorageFileBackend
>>>>> virStorageFileBackendDir = {
>>>>>    };
>>>>>      #endif /* WITH_STORAGE_FS */
>>>>> +
>>>>> +#if WITH_STORAGE_VSTORAGE
>>>>> +static int
>>>>> +virStorageBackendVzStart(virConnectPtr conn ATTRIBUTE_UNUSED,
>>>>> +                         virStoragePoolObjPtr pool)
>>>>> +{
>>>>> +    int ret = -1;
>>>>> +    virCommandPtr cmd = NULL;
>>>>> +
>>>>> +    cmd = virCommandNewArgList(VSTORAGE_MOUNT, "-c",
>>>>> pool->def->source.name,
>>>>> +                               pool->def->target.path, NULL);
>>>>> +    if (virCommandRun(cmd, NULL) < 0)
>>>>> +        goto cleanup;
>>>>> +    ret = 0;
>>>>> +
>>>>> + cleanup:
>>>>> +    virCommandFree(cmd);
>>>>> +    return ret;
>>>>> +}
>>>>> +
>>>>> +static char*
>>>>> +virStorageBackendVzfindPoolSources(virConnectPtr conn
>>>>> ATTRIBUTE_UNUSED,
>>>>> +                                   const char *srcSpec
>>>>> ATTRIBUTE_UNUSED,
>>>>> +                                   unsigned int flags)
>>>>> +{
>>>>> +
>>>>> +    virCommandPtr cmd = NULL;
>>>>> +    char *buf = NULL;
>>>>> +    char *ret = NULL;
>>>>> +    char **clusters = NULL;
>>>>> +    size_t clusters_num = 0;
>>>>> +    size_t i = 0;
>>>>> +    virStoragePoolSourceList vzcluster_list = {
>>>>> +                                .type = VIR_STORAGE_POOL_VSTORAGE,
>>>>> +                                .nsources = 0,
>>>>> +                                .sources = NULL
>>>>> +    };
>>>>> +
>>>>> +    virCheckFlags(0, NULL);
>>>>> +
>>>>> +    cmd = virCommandNewArgList(VSTORAGE, "discover", NULL);
>>>>> +    virCommandSetOutputBuffer(cmd, &buf);
>>>>> +
>>>>> +    if (virCommandRun(cmd, NULL) < 0)
>>>>> +        goto cleanup;
>>>>> +
>>>>> +    if (!(clusters = virStringSplitCount(buf, "\n", 0,
>>>>> &clusters_num)))
>>>>> +        goto cleanup;
>>>>> +
>>>>> +    if (clusters_num > 0) {
>>>>> +        vzcluster_list.nsources = clusters_num - 1;
>>>>> +
>>>>> +        if (VIR_ALLOC_N(vzcluster_list.sources,
>>>>> vzcluster_list.nsources) < 0)
>>>>> +            goto cleanup;
>>>>> +
>>>>> +        for  (; i < vzcluster_list.nsources; i++) {
>>>>> +            if (VIR_ALLOC(vzcluster_list.sources[i].devices) < 0)
>>>>> +                goto cleanup;
>>>>> +            if (VIR_STRDUP(vzcluster_list.sources[i].name,
>>>>> clusters[i]) < 0)
>>>>> +                goto cleanup;
>>>>> +        }
>>>>> +    }
>>>>> +
>>>>> +    if (!(ret = virStoragePoolSourceListFormat(&vzcluster_list)))
>>>>> +        goto cleanup;
>>>>> +
>>>>> + cleanup:
>>>>> +    for (i = 0; i < vzcluster_list.nsources; i++) {
>>>>> +        virStoragePoolSourceClear(&vzcluster_list.sources[i]);
>>>>> +        VIR_FREE(clusters[i]);
>>>>> +    }
>>>>> +    VIR_FREE(vzcluster_list.sources);
>>>>> +    VIR_FREE(buf);
>>>>> +    virCommandFree(cmd);
>>>>> +    return ret;
>>>>> +
>>>>> +}
>>>>> +virStorageBackend virStorageBackendVstorage = {
>>>>> +    .type = VIR_STORAGE_POOL_VSTORAGE,
>>>>> +
>>>>> +    .startPool = virStorageBackendVzStart,
>>>>> +    .checkPool = virStorageBackendFileSystemCheck,
>>>>> +    .stopPool = virStorageBackendFileSystemStop,
>>>>> +    .findPoolSources = virStorageBackendVzfindPoolSources,
>>>>> +    .buildPool = virStorageBackendFileSystemBuild,
>>>>> +    .deletePool = virStorageBackendFileSystemDelete,
>>>>> +    .refreshPool = virStorageBackendFileSystemRefresh,
>>>>> +    .buildVol = virStorageBackendFileSystemVolBuild,
>>>>> +    .buildVolFrom = virStorageBackendFileSystemVolBuildFrom,
>>>>> +    .createVol = virStorageBackendFileSystemVolCreate,
>>>>> +    .refreshVol = virStorageBackendFileSystemVolRefresh,
>>>>> +    .deleteVol = virStorageBackendFileSystemVolDelete,
>>>>> +    .resizeVol = virStorageBackendFileSystemVolResize,
>>>>> +    .uploadVol = virStorageBackendVolUploadLocal,
>>>>> +    .downloadVol = virStorageBackendVolDownloadLocal,
>>>>> +    .wipeVol = virStorageBackendVolWipeLocal,
>>>>> +
>>>>> +};
>>>>> +#endif /* WITH_STORAGE_VSTORAGE */
>>>>> diff --git a/src/storage/storage_backend_fs.h
>>>>> b/src/storage/storage_backend_fs.h
>>>>> index 347ea9b..23cff66 100644
>>>>> --- a/src/storage/storage_backend_fs.h
>>>>> +++ b/src/storage/storage_backend_fs.h
>>>>> @@ -30,6 +30,9 @@
>>>>>    extern virStorageBackend virStorageBackendFileSystem;
>>>>>    extern virStorageBackend virStorageBackendNetFileSystem;
>>>>>    # endif
>>>>> +#if WITH_STORAGE_VSTORAGE
>>>>> +extern virStorageBackend virStorageBackendVstorage;
>>>>> +#endif
>>>>>      typedef enum {
>>>>>        FILESYSTEM_PROBE_FOUND,
>>>>> diff --git a/src/storage/storage_driver.c
>>>>> b/src/storage/storage_driver.c
>>>>> index cb9d578..3b6c7b4 100644
>>>>> --- a/src/storage/storage_driver.c
>>>>> +++ b/src/storage/storage_driver.c
>>>>> @@ -1618,6 +1618,7 @@ storageVolLookupByPath(virConnectPtr conn,
>>>>>                case VIR_STORAGE_POOL_ISCSI:
>>>>>                case VIR_STORAGE_POOL_SCSI:
>>>>>                case VIR_STORAGE_POOL_MPATH:
>>>>> +            case VIR_STORAGE_POOL_VSTORAGE:
>>>>>                    stable_path = virStorageBackendStablePath(pool,
>>>>>                                                             
>>>>> cleanpath,
>>>>>                                                              false);
>>>>> @@ -3485,6 +3486,7 @@ virStorageTranslateDiskSourcePool(virConnectPtr
>>>>> conn,
>>>>>        case VIR_STORAGE_POOL_DISK:
>>>>>        case VIR_STORAGE_POOL_SCSI:
>>>>>        case VIR_STORAGE_POOL_ZFS:
>>>>> +    case VIR_STORAGE_POOL_VSTORAGE:
>>>>>            if (!(def->src->path = virStorageVolGetPath(vol)))
>>>>>                goto cleanup;
>>>>>    diff --git a/tools/virsh-pool.c b/tools/virsh-pool.c
>>>>> index 6045331..6ea2424 100644
>>>>> --- a/tools/virsh-pool.c
>>>>> +++ b/tools/virsh-pool.c
>>>>> @@ -1166,6 +1166,8 @@ cmdPoolList(vshControl *ctl, const vshCmd *cmd
>>>>> ATTRIBUTE_UNUSED)
>>>>>                case VIR_STORAGE_POOL_ZFS:
>>>>>                    flags |= VIR_CONNECT_LIST_STORAGE_POOLS_ZFS;
>>>>>                    break;
>>>>> +            case VIR_STORAGE_POOL_VSTORAGE:
>>>>> +                flags |= VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE;
>>>>>                case VIR_STORAGE_POOL_LAST:
>>>>>                    break;
>>>>>                }
>>>>> diff --git a/tools/virsh.c b/tools/virsh.c
>>>>> index 5dc482d..61c8e2f 100644
>>>>> --- a/tools/virsh.c
>>>>> +++ b/tools/virsh.c
>>>>> @@ -682,6 +682,9 @@ virshShowVersion(vshControl *ctl ATTRIBUTE_UNUSED)
>>>>>    #ifdef WITH_STORAGE_ZFS
>>>>>        vshPrint(ctl, " ZFS");
>>>>>    #endif
>>>>> +#ifdef WITH_STORAGE_VSTORAGE
>>>>> +    vshPrint(ctl, " Vstorage");
>>>>> +#endif
>>>>>        vshPrint(ctl, "\n");
>>>>>          vshPrint(ctl, "%s", _(" Miscellaneous:"));
>>>>>
>>>
> 
> 

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]
  Powered by Linux