[PATCH v6 07/17] qemu: assign e1000e network devices to PCIe slots when appropriate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The e1000e is an emulated network device based on the Intel 82574,
present in qemu 2.7.0 and later. Among other differences from the
e1000, it presents itself as a PCIe device rather than legacy PCI. In
order to get it assigned to a PCIe controller, this patch updates the
flags setting for network devices when the model name is "e1000e".

(Note that for some reason libvirt has never validated the network
device model names other than to check that there are no dangerous
characters in them. That should probably change, but is the subject of
another patch.)

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
---
 src/qemu/qemu_domain_address.c                     |  6 ++++--
 tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.args  | 23 ++++++++++++----------
 tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.xml   |  4 ++++
 .../qemuxml2argv-q35-virtio-pci.args               |  3 +++
 .../qemuxml2xmloutdata/qemuxml2xmlout-q35-pcie.xml | 23 +++++++++++++---------
 .../qemuxml2xmlout-q35-virtio-pci.xml              |  5 +++++
 6 files changed, 43 insertions(+), 21 deletions(-)

diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 3f3e9e4..4c59a28 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -428,8 +428,7 @@ qemuDomainAssignARMVirtioMMIOAddresses(virDomainDefPtr def,
  */
 static virDomainPCIConnectFlags
 qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
-                                         virDomainPCIConnectFlags pcieFlags
-                                         ATTRIBUTE_UNUSED,
+                                         virDomainPCIConnectFlags pcieFlags,
                                          virDomainPCIConnectFlags virtioFlags)
 {
     virDomainPCIConnectFlags pciFlags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE |
@@ -520,6 +519,9 @@ qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
         if (STREQ(net->model, "virtio"))
             return  virtioFlags;
 
+        if (STREQ(net->model, "e1000e"))
+            return pcieFlags;
+
         return pciFlags;
     }
 
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.args b/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.args
index f07c085..d92e0b8 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.args
@@ -35,10 +35,10 @@ QEMU_AUDIO_DRV=none \
 addr=0x1d \
 -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x1d.0x1 \
 -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x1d.0x2 \
--device virtio-scsi-pci,id=scsi0,bus=pci.6,addr=0x0 \
--device virtio-serial-pci,id=virtio-serial0,bus=pci.5,addr=0x0 \
+-device virtio-scsi-pci,id=scsi0,bus=pci.7,addr=0x0 \
+-device virtio-serial-pci,id=virtio-serial0,bus=pci.6,addr=0x0 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk1 \
--device virtio-blk-pci,bus=pci.7,addr=0x0,drive=drive-virtio-disk1,\
+-device virtio-blk-pci,bus=pci.8,addr=0x0,drive=drive-virtio-disk1,\
 id=virtio-disk1 \
 -fsdev local,security_model=passthrough,id=fsdev-fs0,path=/export/to/guest \
 -device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=/import/from/host,\
@@ -46,13 +46,16 @@ bus=pci.3,addr=0x0 \
 -netdev user,id=hostnet0 \
 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,bus=pci.4,\
 addr=0x0 \
--device virtio-input-host-pci,id=input0,evdev=/dev/input/event1234,bus=pci.10,\
+-netdev user,id=hostnet1 \
+-device e1000e,netdev=hostnet1,id=net1,mac=00:11:22:33:44:66,bus=pci.5,\
 addr=0x0 \
--device virtio-mouse-pci,id=input1,bus=pci.11,addr=0x0 \
--device virtio-keyboard-pci,id=input2,bus=pci.12,addr=0x0 \
--device virtio-tablet-pci,id=input3,bus=pci.13,addr=0x0 \
+-device virtio-input-host-pci,id=input0,evdev=/dev/input/event1234,bus=pci.11,\
+addr=0x0 \
+-device virtio-mouse-pci,id=input1,bus=pci.12,addr=0x0 \
+-device virtio-keyboard-pci,id=input2,bus=pci.13,addr=0x0 \
+-device virtio-tablet-pci,id=input3,bus=pci.14,addr=0x0 \
 -device virtio-gpu-pci,id=video0,bus=pcie.0,addr=0x1 \
--device virtio-balloon-pci,id=balloon0,bus=pci.8,addr=0x0 \
+-device virtio-balloon-pci,id=balloon0,bus=pci.9,addr=0x0 \
 -object rng-random,id=objrng0,filename=/dev/urandom \
--device virtio-rng-pci,rng=objrng0,id=rng0,max-bytes=123,period=1234,bus=pci.9,\
-addr=0x0
+-device virtio-rng-pci,rng=objrng0,id=rng0,max-bytes=123,period=1234,\
+bus=pci.10,addr=0x0
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.xml b/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.xml
index be2439e..39db5f0 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.xml
+++ b/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.xml
@@ -46,6 +46,10 @@
       <mac address='00:11:22:33:44:55'/>
       <model type='virtio'/>
     </interface>
+    <interface type='user'>
+      <mac address='00:11:22:33:44:66'/>
+      <model type='e1000e'/>
+    </interface>
     <memballoon model='virtio'/>
     <rng model='virtio'>
       <rate bytes='123' period='1234'/>
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-q35-virtio-pci.args b/tests/qemuxml2argvdata/qemuxml2argv-q35-virtio-pci.args
index 98284a2..68d19ca 100644
--- a/tests/qemuxml2argvdata/qemuxml2argv-q35-virtio-pci.args
+++ b/tests/qemuxml2argvdata/qemuxml2argv-q35-virtio-pci.args
@@ -46,6 +46,9 @@ bus=pci.2,addr=0x1 \
 -netdev user,id=hostnet0 \
 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,bus=pci.2,\
 addr=0x2 \
+-netdev user,id=hostnet1 \
+-device e1000e,netdev=hostnet1,id=net1,mac=00:11:22:33:44:66,bus=pci.3,\
+addr=0x0 \
 -device virtio-input-host-pci,id=input0,evdev=/dev/input/event1234,bus=pci.2,\
 addr=0x8 \
 -device virtio-mouse-pci,id=input1,bus=pci.2,addr=0x9 \
diff --git a/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-pcie.xml b/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-pcie.xml
index 48e9b02..5a23a51 100644
--- a/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-pcie.xml
+++ b/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-pcie.xml
@@ -17,7 +17,7 @@
     <disk type='block' device='disk'>
       <source dev='/dev/HostVG/QEMUGuest1'/>
       <target dev='vdb' bus='virtio'/>
-      <address type='pci' domain='0x0000' bus='0x07' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/>
     </disk>
     <controller type='pci' index='0' model='pcie-root'/>
     <controller type='pci' index='1' model='dmi-to-pci-bridge'>
@@ -90,10 +90,10 @@
       <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' function='0x0'/>
     </controller>
     <controller type='virtio-serial' index='0'>
-      <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/>
     </controller>
     <controller type='scsi' index='0' model='virtio-scsi'>
-      <address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x07' slot='0x00' function='0x0'/>
     </controller>
     <controller type='usb' index='0' model='ich9-ehci1'>
       <address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x7'/>
@@ -123,18 +123,23 @@
       <model type='virtio'/>
       <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
     </interface>
+    <interface type='user'>
+      <mac address='00:11:22:33:44:66'/>
+      <model type='e1000e'/>
+      <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
+    </interface>
     <input type='passthrough' bus='virtio'>
       <source evdev='/dev/input/event1234'/>
-      <address type='pci' domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x0b' slot='0x00' function='0x0'/>
     </input>
     <input type='mouse' bus='virtio'>
-      <address type='pci' domain='0x0000' bus='0x0b' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x0c' slot='0x00' function='0x0'/>
     </input>
     <input type='keyboard' bus='virtio'>
-      <address type='pci' domain='0x0000' bus='0x0c' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x0d' slot='0x00' function='0x0'/>
     </input>
     <input type='tablet' bus='virtio'>
-      <address type='pci' domain='0x0000' bus='0x0d' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x0e' slot='0x00' function='0x0'/>
     </input>
     <input type='mouse' bus='ps2'/>
     <input type='keyboard' bus='ps2'/>
@@ -143,12 +148,12 @@
       <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
     </video>
     <memballoon model='virtio'>
-      <address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
     </memballoon>
     <rng model='virtio'>
       <rate bytes='123' period='1234'/>
       <backend model='random'>/dev/urandom</backend>
-      <address type='pci' domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
+      <address type='pci' domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/>
     </rng>
   </devices>
 </domain>
diff --git a/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-virtio-pci.xml b/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-virtio-pci.xml
index ae541d3..22c2c68 100644
--- a/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-virtio-pci.xml
+++ b/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35-virtio-pci.xml
@@ -123,6 +123,11 @@
       <model type='virtio'/>
       <address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0'/>
     </interface>
+    <interface type='user'>
+      <mac address='00:11:22:33:44:66'/>
+      <model type='e1000e'/>
+      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
+    </interface>
     <input type='passthrough' bus='virtio'>
       <source evdev='/dev/input/event1234'/>
       <address type='pci' domain='0x0000' bus='0x02' slot='0x08' function='0x0'/>
-- 
2.7.4

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]