[PATCH 1/8] qemuhelptest: remove downstream test data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Pavel Hrdina <phrdina@xxxxxxxxxx>
---
 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60        | 227 --------------------
 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device |  57 -----
 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61        | 229 --------------------
 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device |  99 ---------
 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta   | 230 ---------------------
 .../qemu-kvm-0.12.1.2-rhel62-beta-device           | 120 -----------
 tests/qemuhelptest.c                               | 145 -------------
 7 files changed, 1107 deletions(-)
 delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60
 delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device
 delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61
 delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device
 delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta
 delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device

diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60 b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60
deleted file mode 100644
index 3a2ecf3..0000000
--- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60
+++ /dev/null
@@ -1,227 +0,0 @@
-QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2), Copyright (c) 2003-2008 Fabrice Bellard
-
-WARNING: Direct use of qemu-kvm from the command line is unsupported.
-WARNING: Only use via libvirt.
-WARNING: Some options listed here may not be available in future releases.
-
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help     display this help and exit
--version        display version information and exit
--M machine      select emulated machine (-M ? for list)
--cpu cpu        select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
-                set the number of CPUs to 'n' [default=1]
-                maxcpus= maximum number of total cpus, including
-                  offline CPUs for hotplug etc.
-                cores= number of CPU cores on one socket
-                threads= number of threads on one CPU core
-                sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file  use 'file' as floppy disk 0/1 image
--hda/-hdb file  use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file  use 'file' as IDE hard disk 2/3 image
--cdrom file     use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
-       [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
-       [,cache=writethrough|writeback|none][,format=f][,serial=s]
-       [,addr=A][,id=name][,aio=threads|native]
-       [,boot=on|off][,readonly=on|off]
-                use 'file' as a drive image
--set group.id.arg=value
-                set <arg> parameter for item <id> of type <group>
-                i.e. -set drive.$id.file=/path/to/image
--global driver.property=value
-                set a global default for a driver property
--mtdblock file  use 'file' as on-board Flash memory image
--sd file        use 'file' as SecureDigital card image
--pflash file    use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
-                'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
--snapshot       write to temporary files instead of disk image files
--m megs         set virtual RAM size to megs MB [default=128]
--k language     use keyboard layout (for example 'fr' for French)
--audio-help     print list of audio drivers and their options
--soundhw c1,... enable audio support
-                and only specified sound cards (comma separated list)
-                use -soundhw ? to get the list of supported cards
-                use -soundhw all to enable all of them
--usb            enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,prop[=value][,...]]
-                add device (based on driver)
-                prop=value,... sets driver properties
-                use -device ? to print all possible drivers
-                use -device driver,? to print all possible properties
--name string1[,process=string2]    set the name of the guest
-            string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
-                specify machine UUID
-
-Display options:
--nographic      disable graphical output and redirect serial I/Os to console
--spice <args>   use spice
--portrait       rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|xenfb|qxl|none]
-                select video card type
--full-screen    start in full screen
--vnc display    start a VNC server on display
-
-i386 target only:
--win2k-hack     use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk  disable boot signature checking for floppy disks
--no-acpi        disable ACPI
--balloon none   disable balloon device
--balloon virtio[,addr=str]
-                enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
-                ACPI table description
--smbios file=binary
-                Load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
-                Specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
-              [,uuid=uuid][,sku=str][,family=str]
-                Specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
-                create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n]
-         [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
-         [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
-                connect the user mode network stack to VLAN 'n', configure its
-                DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h]
-                connect the host TAP network interface to VLAN 'n' and use the
-                network scripts 'file' (default=/etc/qemu-ifup)
-                and 'dfile' (default=/etc/qemu-ifdown);
-                use '[down]script=no' to disable script execution;
-                use 'fd=h' to connect to an already opened TAP interface
-                use 'sndbuf=nbytes' to limit the size of the send buffer; the
-                default of 'sndbuf=1048576' can be disabled using 'sndbuf=0'
-                use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use
-                vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
-                use vhost=on to enable experimental in kernel accelerator
-                use 'vhostfd=h' to connect to an already opened vhost net device
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
-                connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
-                connect the vlan 'n' to multicast maddr and port
--net dump[,vlan=n][,file=f][,len=n]
-                dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none       use it alone to have zero network devices; if no -net option
-                is provided, the default is '-net nic -net user'
--netdev [user|tap|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
-         [,server][,nowait][,telnet] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
-         [,localport=localport][,ipv4][,ipv6]
--chardev msmouse,id=id
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
--chardev file,id=id,path=path
--chardev pipe,id=id,path=path
--chardev pty,id=id
--chardev stdio,id=id
--chardev tty,id=id,path=path
--chardev parport,id=id,path=path
-
-Bluetooth(R) options:
--bt hci,null    dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
-                use host's HCI with the given name
--bt hci[,vlan=n]
-                emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
-                add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
-                emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file    use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev     redirect the serial port to char device 'dev'
--parallel dev   redirect the parallel port to char device 'dev'
--monitor dev    redirect the monitor to char device 'dev'
--qmp dev        like -monitor but opens in 'control' mode.
--mon chardev=[name][,mode=readline|control][,default]
--pidfile file   write PID to 'file'
--singlestep   always run in singlestep mode
--S              freeze CPU at startup (use 'c' to start execution)
--gdb dev        wait for gdb connection on 'dev'
--s              shorthand for -gdb tcp::1234
--d item1,...    output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
-                force hard disk 0 physical geometry and the optional BIOS
-                translation (t=none or lba) (usually qemu can guess them)
--L path         set the directory for the BIOS, VGA BIOS and keymaps
--bios file      set the filename for the BIOS
--enable-kvm     enable KVM full virtualization support
--no-reboot      exit instead of rebooting
--no-shutdown    stop before shutdown
--loadvm [tag|id]
-                start right away with a saved state (loadvm in monitor)
--daemonize      daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock          force the use of the given methods for timer alarm.
-                To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
-                set the RTC base and clock, enable drift fix for clock ticks
--icount [N|auto]
-                enable virtual instruction counter with 2^N clock ticks per
-                instruction
--watchdog i6300esb|ib700
-                enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
-                action when watchdog fires [default=reset]
--echr chr       set terminal escape character instead of ctrl-a
--virtioconsole c
-                set virtio console
--show-cursor    show cursor
--tb-size n      set TB size
--incoming p     prepare for incoming migration, listen on port p
--nodefaults     don't create default devices.
--chroot dir     Chroot to dir just before starting the VM.
--runas user     Change to user id user just before starting the VM.
--nodefconfig
-                do not load default config files at startup
--readconfig <file>
--writeconfig <file>
-                read/write config file
--no-kvm         disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit     disable KVM kernel mode PIT
--no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection
--pcidevice host=bus:dev.func[,dma=none][,name=string]
-                expose a PCI device to the guest OS.
-                dma=none: don't perform any dma translations (default is to use an iommu)
-                'string' is used in log output.
--enable-nesting enable support for running a VM inside the VM (AMD only)
--nvram FILE          provide ia64 nvram contents
--tdf                 enable guest time drift compensation
--kvm-shadow-memory MEGABYTES
-                     allocate MEGABYTES for kvm mmu shadowing
--mem-path FILE       provide backing storage for guest RAM
--mem-prealloc        preallocate guest memory (use with -mempath)
-
-During emulation, the following keys are useful:
-ctrl-alt-f      toggle full screen
-ctrl-alt-n      switch to virtual console 'n'
-ctrl-alt        toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
-
-WARNING: Direct use of qemu-kvm from the command line is unsupported.
-WARNING: Only use via libvirt.
-WARNING: Some options listed here may not be available in future releases.
-
diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device
deleted file mode 100644
index d20fb7d..0000000
--- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device
+++ /dev/null
@@ -1,57 +0,0 @@
-name "pci-bridge", bus PCI
-name "virtio-balloon-pci", bus PCI
-name "virtio-serial-pci", bus PCI, alias "virtio-serial"
-name "virtio-net-pci", bus PCI
-name "virtio-blk-pci", bus PCI
-name "i82562", bus PCI
-name "i82559er", bus PCI
-name "i82559c", bus PCI
-name "i82559b", bus PCI
-name "i82559a", bus PCI
-name "i82558b", bus PCI
-name "i82558a", bus PCI
-name "i82557c", bus PCI
-name "i82557b", bus PCI
-name "i82557a", bus PCI
-name "i82551", bus PCI
-name "i82550", bus PCI
-name "pcnet", bus PCI
-name "rtl8139", bus PCI
-name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
-name "ide-drive", bus IDE
-name "isa-ide", bus ISA
-name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
-name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
-name "VGA", bus PCI
-name "SUNW,fdtwo", bus System
-name "sysbus-fdc", bus System
-name "isa-serial", bus ISA
-name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
-name "isa-parallel", bus ISA
-name "piix4-usb-uhci", bus PCI
-name "piix3-usb-uhci", bus PCI
-name "vmware-svga", bus PCI
-name "ib700", bus ISA
-name "ne2k_isa", bus ISA
-name "testdev", bus ISA
-name "pci-assign", bus PCI, desc "pass through host pci devices to the guest"
-name "qxl", bus PCI, desc "Spice QXL GPU"
-name "spicevmc", bus virtio-serial-bus
-name "smbus-eeprom", bus I2C
-name "usb-hub", bus USB
-name "usb-host", bus USB
-name "usb-kbd", bus USB
-name "usb-mouse", bus USB
-name "usb-tablet", bus USB
-name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet"
-name "usb-braille", bus USB
-name "usb-serial", bus USB
-name "usb-net", bus USB
-name "usb-bt-dongle", bus USB
-name "virtserialport", bus virtio-serial-bus
-name "virtconsole", bus virtio-serial-bus
-name "i6300esb", bus PCI
-name "ne2k_pci", bus PCI
-pci-assign.host=pci-hostaddr
-pci-assign.iommu=uint32
-pci-assign.configfd=string
diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61 b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61
deleted file mode 100644
index e95c6b1..0000000
--- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61
+++ /dev/null
@@ -1,229 +0,0 @@
-QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2), Copyright (c) 2003-2008 Fabrice Bellard
-
-WARNING: Direct use of qemu-kvm from the command line is unsupported.
-WARNING: Only use via libvirt.
-WARNING: Some options listed here may not be available in future releases.
-
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help     display this help and exit
--version        display version information and exit
--M machine      select emulated machine (-M ? for list)
--cpu cpu        select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
-                set the number of CPUs to 'n' [default=1]
-                maxcpus= maximum number of total cpus, including
-                  offline CPUs for hotplug etc.
-                cores= number of CPU cores on one socket
-                threads= number of threads on one CPU core
-                sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file  use 'file' as floppy disk 0/1 image
--hda/-hdb file  use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file  use 'file' as IDE hard disk 2/3 image
--cdrom file     use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
-       [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
-       [,cache=writethrough|writeback|none|unsafe][,format=f]
-       [,serial=s][,addr=A][,id=name][,aio=threads|native]
-       [,readonly=on|off]
-                use 'file' as a drive image
--set group.id.arg=value
-                set <arg> parameter for item <id> of type <group>
-                i.e. -set drive.$id.file=/path/to/image
--global driver.property=value
-                set a global default for a driver property
--mtdblock file  use 'file' as on-board Flash memory image
--sd file        use 'file' as SecureDigital card image
--pflash file    use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
-                'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
--snapshot       write to temporary files instead of disk image files
--m megs         set virtual RAM size to megs MB [default=128]
--k language     use keyboard layout (for example 'fr' for French)
--audio-help     print list of audio drivers and their options
--soundhw c1,... enable audio support
-                and only specified sound cards (comma separated list)
-                use -soundhw ? to get the list of supported cards
-                use -soundhw all to enable all of them
--usb            enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,prop[=value][,...]]
-                add device (based on driver)
-                prop=value,... sets driver properties
-                use -device ? to print all possible drivers
-                use -device driver,? to print all possible properties
--name string1[,process=string2]    set the name of the guest
-            string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
-                specify machine UUID
-
-Display options:
--nographic      disable graphical output and redirect serial I/Os to console
--spice <args>   enable spice
--portrait       rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|qxl|xenfb|none]
-                select video card type
--full-screen    start in full screen
--vnc display    start a VNC server on display
-
-i386 target only:
--win2k-hack     use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk  disable boot signature checking for floppy disks
--no-acpi        disable ACPI
--balloon none   disable balloon device
--balloon virtio[,addr=str]
-                enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
-                ACPI table description
--smbios file=binary
-                Load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
-                Specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
-              [,uuid=uuid][,sku=str][,family=str]
-                Specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
-                create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n]
-         [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
-         [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
-                connect the user mode network stack to VLAN 'n', configure its
-                DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h]
-                connect the host TAP network interface to VLAN 'n' and use the
-                network scripts 'file' (default=/etc/qemu-ifup)
-                and 'dfile' (default=/etc/qemu-ifdown);
-                use '[down]script=no' to disable script execution;
-                use 'fd=h' to connect to an already opened TAP interface
-                use 'sndbuf=nbytes' to limit the size of the send buffer; the
-                default of 'sndbuf=1048576' can be disabled using 'sndbuf=0'
-                use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use
-                vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
-                use vhost=on to enable experimental in kernel accelerator
-                use 'vhostfd=h' to connect to an already opened vhost net device
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
-                connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
-                connect the vlan 'n' to multicast maddr and port
--net dump[,vlan=n][,file=f][,len=n]
-                dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none       use it alone to have zero network devices; if no -net option
-                is provided, the default is '-net nic -net user'
--netdev [user|tap|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
-         [,server][,nowait][,telnet] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
-         [,localport=localport][,ipv4][,ipv6]
--chardev msmouse,id=id
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
--chardev file,id=id,path=path
--chardev pipe,id=id,path=path
--chardev pty,id=id
--chardev stdio,id=id
--chardev tty,id=id,path=path
--chardev parport,id=id,path=path
--chardev spicevmc,id=id,debug=debug,name=name
-
-Bluetooth(R) options:
--bt hci,null    dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
-                use host's HCI with the given name
--bt hci[,vlan=n]
-                emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
-                add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
-                emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file    use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev     redirect the serial port to char device 'dev'
--parallel dev   redirect the parallel port to char device 'dev'
--monitor dev    redirect the monitor to char device 'dev'
--qmp dev        like -monitor but opens in 'control' mode.
--mon chardev=[name][,mode=readline|control][,default]
--pidfile file   write PID to 'file'
--singlestep   always run in singlestep mode
--S              freeze CPU at startup (use 'c' to start execution)
--gdb dev        wait for gdb connection on 'dev'
--s              shorthand for -gdb tcp::1234
--d item1,...    output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
-                force hard disk 0 physical geometry and the optional BIOS
-                translation (t=none or lba) (usually qemu can guess them)
--L path         set the directory for the BIOS, VGA BIOS and keymaps
--bios file      set the filename for the BIOS
--enable-kvm     enable KVM full virtualization support
--no-reboot      exit instead of rebooting
--no-shutdown    stop before shutdown
--loadvm [tag|id]
-                start right away with a saved state (loadvm in monitor)
--daemonize      daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock          force the use of the given methods for timer alarm.
-                To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
-                set the RTC base and clock, enable drift fix for clock ticks
--icount [N|auto]
-                enable virtual instruction counter with 2^N clock ticks per
-                instruction
--watchdog i6300esb|ib700
-                enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
-                action when watchdog fires [default=reset]
--echr chr       set terminal escape character instead of ctrl-a
--virtioconsole c
-                set virtio console
--show-cursor    show cursor
--tb-size n      set TB size
--incoming p     prepare for incoming migration, listen on port p
--nodefaults     don't create default devices.
--chroot dir     Chroot to dir just before starting the VM.
--runas user     Change to user id user just before starting the VM.
--nodefconfig
-                do not load default config files at startup
--readconfig <file>
--writeconfig <file>
-                read/write config file
--no-kvm         disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit     disable KVM kernel mode PIT
--no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection
--pcidevice host=bus:dev.func[,dma=none][,name=string]
-                expose a PCI device to the guest OS.
-                dma=none: don't perform any dma translations (default is to use an iommu)
-                'string' is used in log output.
--enable-nesting enable support for running a VM inside the VM (AMD only)
--nvram FILE          provide ia64 nvram contents
--tdf                 enable guest time drift compensation
--kvm-shadow-memory MEGABYTES
-                     allocate MEGABYTES for kvm mmu shadowing
--mem-path FILE       provide backing storage for guest RAM
--mem-prealloc        preallocate guest memory (use with -mempath)
--redhat-disable-KSM  disable KSM on guest physical memory
-
-During emulation, the following keys are useful:
-ctrl-alt-f      toggle full screen
-ctrl-alt-n      switch to virtual console 'n'
-ctrl-alt        toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
-
-WARNING: Direct use of qemu-kvm from the command line is unsupported.
-WARNING: Only use via libvirt.
-WARNING: Some options listed here may not be available in future releases.
-
diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device
deleted file mode 100644
index 8ac9630..0000000
--- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device
+++ /dev/null
@@ -1,99 +0,0 @@
-open /dev/kvm: No such file or directory
-Could not initialize KVM, will disable KVM support
-name "pci-bridge", bus PCI
-name "virtio-balloon-pci", bus PCI
-name "virtio-serial-pci", bus PCI, alias "virtio-serial"
-name "virtio-net-pci", bus PCI
-name "virtio-blk-pci", bus PCI
-name "i82562", bus PCI
-name "i82559er", bus PCI
-name "i82559c", bus PCI
-name "i82559b", bus PCI
-name "i82559a", bus PCI
-name "i82558b", bus PCI
-name "i82558a", bus PCI
-name "i82557c", bus PCI
-name "i82557b", bus PCI
-name "i82557a", bus PCI
-name "i82551", bus PCI
-name "i82550", bus PCI
-name "pcnet", bus PCI
-name "rtl8139", bus PCI
-name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
-name "ide-drive", bus IDE
-name "isa-ide", bus ISA
-name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
-name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
-name "intel-hda", bus PCI, desc "Intel HD Audio Controller"
-name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex"
-name "hda-output", bus HDA, desc "HDA Audio Codec, output-only"
-name "VGA", bus PCI
-name "SUNW,fdtwo", bus System
-name "sysbus-fdc", bus System
-name "isa-serial", bus ISA
-name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
-name "isa-parallel", bus ISA
-name "piix4-usb-uhci", bus PCI
-name "piix3-usb-uhci", bus PCI
-name "vmware-svga", bus PCI
-name "ib700", bus ISA
-name "ne2k_isa", bus ISA
-name "testdev", bus ISA
-name "pci-assign", bus PCI, desc "pass through host pci devices to the guest"
-name "qxl", bus PCI, desc "Spice QXL GPU (secondary)"
-name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)"
-name "smbus-eeprom", bus I2C
-name "usb-hub", bus USB
-name "usb-host", bus USB
-name "usb-kbd", bus USB
-name "usb-mouse", bus USB
-name "usb-tablet", bus USB
-name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet"
-name "usb-braille", bus USB
-name "usb-serial", bus USB
-name "usb-net", bus USB
-name "usb-bt-dongle", bus USB
-name "usb-ccid", bus USB, desc "CCID Rev 1.1 smartcard reader"
-name "ccid-card-passthru", bus ccid-bus, desc "passthrough smartcard"
-name "virtserialport", bus virtio-serial-bus
-name "virtconsole", bus virtio-serial-bus
-name "i6300esb", bus PCI
-name "ne2k_pci", bus PCI
-pci-assign.host=pci-hostaddr
-pci-assign.iommu=uint32
-pci-assign.configfd=string
-virtio-blk-pci.class=hex32
-virtio-blk-pci.drive=drive
-virtio-blk-pci.logical_block_size=uint16
-virtio-blk-pci.physical_block_size=uint16
-virtio-blk-pci.min_io_size=uint16
-virtio-blk-pci.opt_io_size=uint32
-virtio-blk-pci.ioeventfd=on/off
-virtio-blk-pci.vectors=uint32
-virtio-blk-pci.indirect_desc=on/off
-virtio-blk-pci.scsi=on/off
-virtio-net-pci.vectors=uint32
-virtio-net-pci.indirect_desc=on/off
-virtio-net-pci.csum=on/off
-virtio-net-pci.guest_csum=on/off
-virtio-net-pci.gso=on/off
-virtio-net-pci.guest_tso4=on/off
-virtio-net-pci.guest_tso6=on/off
-virtio-net-pci.guest_ecn=on/off
-virtio-net-pci.guest_ufo=on/off
-virtio-net-pci.host_tso4=on/off
-virtio-net-pci.host_tso6=on/off
-virtio-net-pci.host_ecn=on/off
-virtio-net-pci.host_ufo=on/off
-virtio-net-pci.mrg_rxbuf=on/off
-virtio-net-pci.status=on/off
-virtio-net-pci.ctrl_vq=on/off
-virtio-net-pci.ctrl_rx=on/off
-virtio-net-pci.ctrl_vlan=on/off
-virtio-net-pci.ctrl_rx_extra=on/off
-virtio-net-pci.mac=macaddr
-virtio-net-pci.vlan=vlan
-virtio-net-pci.netdev=netdev
-virtio-net-pci.x-txtimer=uint32
-virtio-net-pci.x-txburst=int32
-virtio-net-pci.tx=string
diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta
deleted file mode 100644
index d5927e6..0000000
--- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta
+++ /dev/null
@@ -1,230 +0,0 @@
-QEMU PC emulator version 0.12.1 (qemu-kvm-0.12.1.2), Copyright (c) 2003-2008 Fabrice Bellard
-
-WARNING: Direct use of qemu-kvm from the command line is not recommended by Red Hat.
-WARNING: Some command line options listed here may not be available in future releases.
-WARNING: Red Hat recommends the use of libvirt as the stable management interface.
-
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help     display this help and exit
--version        display version information and exit
--M machine      select emulated machine (-M ? for list)
--cpu cpu        select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
-                set the number of CPUs to 'n' [default=1]
-                maxcpus= maximum number of total cpus, including
-                  offline CPUs for hotplug etc.
-                cores= number of CPU cores on one socket
-                threads= number of threads on one CPU core
-                sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file  use 'file' as floppy disk 0/1 image
--hda/-hdb file  use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file  use 'file' as IDE hard disk 2/3 image
--cdrom file     use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
-       [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
-       [,cache=writethrough|writeback|none|unsafe][,format=f]
-       [,serial=s][,addr=A][,id=name][,aio=threads|native]
-       [,readonly=on|off][,copy-on-read=on|off][,stream=on|off]
-                use 'file' as a drive image
--set group.id.arg=value
-                set <arg> parameter for item <id> of type <group>
-                i.e. -set drive.$id.file=/path/to/image
--global driver.property=value
-                set a global default for a driver property
--mtdblock file  use 'file' as on-board Flash memory image
--sd file        use 'file' as SecureDigital card image
--pflash file    use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
-                'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
--snapshot       write to temporary files instead of disk image files
--m megs         set virtual RAM size to megs MB [default=128]
--k language     use keyboard layout (for example 'fr' for French)
--audio-help     print list of audio drivers and their options
--soundhw c1,... enable audio support
-                and only specified sound cards (comma separated list)
-                use -soundhw ? to get the list of supported cards
-                use -soundhw all to enable all of them
--usb            enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,prop[=value][,...]]
-                add device (based on driver)
-                prop=value,... sets driver properties
-                use -device ? to print all possible drivers
-                use -device driver,? to print all possible properties
--name string1[,process=string2]    set the name of the guest
-            string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
-                specify machine UUID
-
-Display options:
--nographic      disable graphical output and redirect serial I/Os to console
--spice <args>   enable spice
--portrait       rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|qxl|xenfb|none]
-                select video card type
--full-screen    start in full screen
--vnc display    start a VNC server on display
-
-i386 target only:
--win2k-hack     use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk  disable boot signature checking for floppy disks
--no-acpi        disable ACPI
--balloon none   disable balloon device
--balloon virtio[,addr=str]
-                enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
-                ACPI table description
--smbios file=binary
-                Load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
-                Specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
-              [,uuid=uuid][,sku=str][,family=str]
-                Specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
-                create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n]
-         [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
-         [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
-                connect the user mode network stack to VLAN 'n', configure its
-                DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]
-                connect the host TAP network interface to VLAN 'n' and use the
-                network scripts 'file' (default=/etc/qemu-ifup)
-                and 'dfile' (default=/etc/qemu-ifdown);
-                use '[down]script=no' to disable script execution;
-                use 'fd=h' to connect to an already opened TAP interface
-                use 'sndbuf=nbytes' to limit the size of the send buffer (the
-                default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')
-                use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use
-                vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
-                use vhost=on to enable experimental in kernel accelerator
-                    (only has effect for virtio guests which use MSIX)
-                use vhostforce=on to force vhost on for non-MSIX virtio guests
-                use 'vhostfd=h' to connect to an already opened vhost net device
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
-                connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
-                connect the vlan 'n' to multicast maddr and port
--net dump[,vlan=n][,file=f][,len=n]
-                dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none       use it alone to have zero network devices; if no -net option
-                is provided, the default is '-net nic -net user'
--netdev [user|tap|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
-         [,server][,nowait][,telnet] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
-         [,localport=localport][,ipv4][,ipv6]
--chardev msmouse,id=id
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
--chardev file,id=id,path=path
--chardev pipe,id=id,path=path
--chardev pty,id=id
--chardev stdio,id=id
--chardev tty,id=id,path=path
--chardev parport,id=id,path=path
--chardev spicevmc,id=id,debug=debug,name=name
-
-Bluetooth(R) options:
--bt hci,null    dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
-                use host's HCI with the given name
--bt hci[,vlan=n]
-                emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
-                add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
-                emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file    use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev     redirect the serial port to char device 'dev'
--parallel dev   redirect the parallel port to char device 'dev'
--monitor dev    redirect the monitor to char device 'dev'
--qmp dev        like -monitor but opens in 'control' mode.
--mon chardev=[name][,mode=readline|control][,default]
--pidfile file   write PID to 'file'
--singlestep   always run in singlestep mode
--S              freeze CPU at startup (use 'c' to start execution)
--gdb dev        wait for gdb connection on 'dev'
--s              shorthand for -gdb tcp::1234
--d item1,...    output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
-                force hard disk 0 physical geometry and the optional BIOS
-                translation (t=none or lba) (usually qemu can guess them)
--L path         set the directory for the BIOS, VGA BIOS and keymaps
--bios file      set the filename for the BIOS
--enable-kvm     enable KVM full virtualization support
--no-reboot      exit instead of rebooting
--no-shutdown    stop before shutdown
--loadvm [tag|id]
-                start right away with a saved state (loadvm in monitor)
--daemonize      daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock          force the use of the given methods for timer alarm.
-                To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
-                set the RTC base and clock, enable drift fix for clock ticks
--icount [N|auto]
-                enable virtual instruction counter with 2^N clock ticks per
-                instruction
--watchdog i6300esb|ib700
-                enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
-                action when watchdog fires [default=reset]
--echr chr       set terminal escape character instead of ctrl-a
--virtioconsole c
-                set virtio console
--show-cursor    show cursor
--tb-size n      set TB size
--incoming p     prepare for incoming migration, listen on port p
--nodefaults     don't create default devices.
--chroot dir     Chroot to dir just before starting the VM.
--runas user     Change to user id user just before starting the VM.
--nodefconfig
-                do not load default config files at startup
--readconfig <file>
--writeconfig <file>
-                read/write config file
--no-kvm         disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit     disable KVM kernel mode PIT
--no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection
--pcidevice host=bus:dev.func[,dma=none][,name=string]
-                expose a PCI device to the guest OS.
-                dma=none: don't perform any dma translations (default is to use an iommu)
-                'string' is used in log output.
--nvram FILE          provide ia64 nvram contents
--tdf                 enable guest time drift compensation
--kvm-shadow-memory MEGABYTES
-                     allocate MEGABYTES for kvm mmu shadowing
--mem-path FILE       provide backing storage for guest RAM
--mem-prealloc        preallocate guest memory (use with -mempath)
--redhat-disable-KSM  disable KSM on guest physical memory
-
-During emulation, the following keys are useful:
-ctrl-alt-f      toggle full screen
-ctrl-alt-n      switch to virtual console 'n'
-ctrl-alt        toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
-
-WARNING: Direct use of qemu-kvm from the command line is not recommended by Red Hat.
-WARNING: Some command line options listed here may not be available in future releases.
-WARNING: Red Hat recommends the use of libvirt as the stable management interface.
-
diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device b/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device
deleted file mode 100644
index ee0fd78..0000000
--- a/tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device
+++ /dev/null
@@ -1,120 +0,0 @@
-name "pci-bridge", bus PCI
-name "virtio-balloon-pci", bus PCI
-name "virtio-serial-pci", bus PCI, alias "virtio-serial"
-name "virtio-net-pci", bus PCI
-name "virtio-blk-pci", bus PCI, alias "virtio-blk"
-name "i82562", bus PCI
-name "i82559er", bus PCI
-name "i82559c", bus PCI
-name "i82559b", bus PCI
-name "i82559a", bus PCI
-name "i82558b", bus PCI
-name "i82558a", bus PCI
-name "i82557c", bus PCI
-name "i82557b", bus PCI
-name "i82557a", bus PCI
-name "i82551", bus PCI
-name "i82550", bus PCI
-name "pcnet", bus PCI
-name "rtl8139", bus PCI
-name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
-name "ide-drive", bus IDE
-name "isa-ide", bus ISA
-name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
-name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
-name "intel-hda", bus PCI, desc "Intel HD Audio Controller"
-name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex"
-name "hda-output", bus HDA, desc "HDA Audio Codec, output-only"
-name "VGA", bus PCI
-name "SUNW,fdtwo", bus System
-name "sysbus-fdc", bus System
-name "isa-serial", bus ISA
-name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
-name "isa-parallel", bus ISA
-name "sga", bus ISA, desc "Serial Graphics Adapter"
-name "ich9-usb-uhci3", bus PCI
-name "ich9-usb-uhci2", bus PCI
-name "ich9-usb-uhci1", bus PCI
-name "piix4-usb-uhci", bus PCI
-name "piix3-usb-uhci", bus PCI
-name "ib700", bus ISA
-name "ne2k_isa", bus ISA
-name "testdev", bus ISA
-name "pci-assign", bus PCI, desc "pass through host pci devices to the guest"
-name "qxl", bus PCI, desc "Spice QXL GPU (secondary)"
-name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)"
-name "smbus-eeprom", bus I2C
-name "usb-hub", bus USB
-name "usb-host", bus USB
-name "usb-kbd", bus USB
-name "usb-mouse", bus USB
-name "usb-tablet", bus USB
-name "usb-storage", bus USB
-name "scsi-disk", bus SCSI, desc "virtual SCSI disk or CD-ROM (legacy)"
-name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM"
-name "scsi-hd", bus SCSI, desc "virtual SCSI disk"
-name "usb-ccid", bus USB, desc "CCID Rev 1.1 smartcard reader"
-name "ccid-card-passthru", bus ccid-bus, desc "passthrough smartcard"
-name "virtserialport", bus virtio-serial-bus
-name "virtconsole", bus virtio-serial-bus
-name "ich9-usb-ehci1", bus PCI
-name "usb-ehci", bus PCI
-name "i6300esb", bus PCI
-name "ne2k_pci", bus PCI
-pci-assign.host=pci-hostaddr
-pci-assign.iommu=uint32
-pci-assign.bootindex=int32
-pci-assign.configfd=string
-pci-assign.addr=pci-devfn
-pci-assign.romfile=string
-pci-assign.rombar=uint32
-pci-assign.multifunction=on/off
-virtio-blk-pci.class=hex32
-virtio-blk-pci.drive=drive
-virtio-blk-pci.logical_block_size=uint16
-virtio-blk-pci.physical_block_size=uint16
-virtio-blk-pci.min_io_size=uint16
-virtio-blk-pci.opt_io_size=uint32
-virtio-blk-pci.bootindex=int32
-virtio-blk-pci.discard_granularity=uint32
-virtio-blk-pci.ioeventfd=on/off
-virtio-blk-pci.vectors=uint32
-virtio-blk-pci.indirect_desc=on/off
-virtio-blk-pci.event_idx=on/off
-virtio-blk-pci.scsi=on/off
-virtio-blk-pci.addr=pci-devfn
-virtio-blk-pci.romfile=string
-virtio-blk-pci.rombar=uint32
-virtio-blk-pci.multifunction=on/off
-virtio-net-pci.ioeventfd=on/off
-virtio-net-pci.vectors=uint32
-virtio-net-pci.indirect_desc=on/off
-virtio-net-pci.event_idx=on/off
-virtio-net-pci.csum=on/off
-virtio-net-pci.guest_csum=on/off
-virtio-net-pci.gso=on/off
-virtio-net-pci.guest_tso4=on/off
-virtio-net-pci.guest_tso6=on/off
-virtio-net-pci.guest_ecn=on/off
-virtio-net-pci.guest_ufo=on/off
-virtio-net-pci.host_tso4=on/off
-virtio-net-pci.host_tso6=on/off
-virtio-net-pci.host_ecn=on/off
-virtio-net-pci.host_ufo=on/off
-virtio-net-pci.mrg_rxbuf=on/off
-virtio-net-pci.status=on/off
-virtio-net-pci.ctrl_vq=on/off
-virtio-net-pci.ctrl_rx=on/off
-virtio-net-pci.ctrl_vlan=on/off
-virtio-net-pci.ctrl_rx_extra=on/off
-virtio-net-pci.mac=macaddr
-virtio-net-pci.vlan=vlan
-virtio-net-pci.netdev=netdev
-virtio-net-pci.bootindex=int32
-virtio-net-pci.x-txtimer=uint32
-virtio-net-pci.x-txburst=int32
-virtio-net-pci.tx=string
-virtio-net-pci.addr=pci-devfn
-virtio-net-pci.romfile=string
-virtio-net-pci.rombar=uint32
-virtio-net-pci.multifunction=on/off
diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c
index 7c8b841..3d0dd8d 100644
--- a/tests/qemuhelptest.c
+++ b/tests/qemuhelptest.c
@@ -166,47 +166,6 @@ mymain(void)
             QEMU_CAPS_NO_SHUTDOWN,
             QEMU_CAPS_NO_ACPI,
             QEMU_CAPS_VNC);
-    DO_TEST("qemu-kvm-0.12.1.2-rhel60", 12001, 1, 0,
-            QEMU_CAPS_DRIVE_BOOT,
-            QEMU_CAPS_KVM,
-            QEMU_CAPS_DRIVE_SERIAL,
-            QEMU_CAPS_MEM_PATH,
-            QEMU_CAPS_CHARDEV,
-            QEMU_CAPS_ENABLE_KVM,
-            QEMU_CAPS_MONITOR_JSON,
-            QEMU_CAPS_NETDEV,
-            QEMU_CAPS_RTC,
-            QEMU_CAPS_VHOST_NET,
-            QEMU_CAPS_NO_KVM_PIT,
-            QEMU_CAPS_TDF,
-            QEMU_CAPS_PCI_CONFIGFD,
-            QEMU_CAPS_NODEFCONFIG,
-            QEMU_CAPS_BOOT_MENU,
-            QEMU_CAPS_NESTING,
-            QEMU_CAPS_NAME_PROCESS,
-            QEMU_CAPS_SMBIOS_TYPE,
-            QEMU_CAPS_VGA_QXL,
-            QEMU_CAPS_SPICE,
-            QEMU_CAPS_VGA_NONE,
-            QEMU_CAPS_DRIVE_AIO,
-            QEMU_CAPS_DEVICE_SPICEVMC,
-            QEMU_CAPS_PIIX3_USB_UHCI,
-            QEMU_CAPS_PIIX4_USB_UHCI,
-            QEMU_CAPS_USB_HUB,
-            QEMU_CAPS_NO_SHUTDOWN,
-            QEMU_CAPS_NO_ACPI,
-            QEMU_CAPS_VNC,
-            QEMU_CAPS_DEVICE_QXL,
-            QEMU_CAPS_DEVICE_VGA,
-            QEMU_CAPS_DEVICE_CIRRUS_VGA,
-            QEMU_CAPS_DEVICE_VMWARE_SVGA,
-            QEMU_CAPS_DEVICE_USB_SERIAL,
-            QEMU_CAPS_DEVICE_USB_NET,
-            QEMU_CAPS_DEVICE_USB_KBD,
-            QEMU_CAPS_DEVICE_PCI_BRIDGE,
-            QEMU_CAPS_DEVICE_RTL8139,
-            QEMU_CAPS_DEVICE_E1000,
-            QEMU_CAPS_DEVICE_VIRTIO_NET);
     DO_TEST("qemu-kvm-0.12.3", 12003, 1, 0,
             QEMU_CAPS_DRIVE_BOOT,
             QEMU_CAPS_KVM,
@@ -280,110 +239,6 @@ mymain(void)
             QEMU_CAPS_DEVICE_RTL8139,
             QEMU_CAPS_DEVICE_E1000,
             QEMU_CAPS_DEVICE_VIRTIO_NET);
-    DO_TEST("qemu-kvm-0.12.1.2-rhel61", 12001, 1, 0,
-            QEMU_CAPS_DRIVE_CACHE_UNSAFE,
-            QEMU_CAPS_KVM,
-            QEMU_CAPS_DRIVE_SERIAL,
-            QEMU_CAPS_MEM_PATH,
-            QEMU_CAPS_CHARDEV,
-            QEMU_CAPS_ENABLE_KVM,
-            QEMU_CAPS_MONITOR_JSON,
-            QEMU_CAPS_NETDEV,
-            QEMU_CAPS_RTC,
-            QEMU_CAPS_VHOST_NET,
-            QEMU_CAPS_NO_KVM_PIT,
-            QEMU_CAPS_TDF,
-            QEMU_CAPS_PCI_CONFIGFD,
-            QEMU_CAPS_NODEFCONFIG,
-            QEMU_CAPS_BOOT_MENU,
-            QEMU_CAPS_NESTING,
-            QEMU_CAPS_NAME_PROCESS,
-            QEMU_CAPS_SMBIOS_TYPE,
-            QEMU_CAPS_VGA_QXL,
-            QEMU_CAPS_SPICE,
-            QEMU_CAPS_VGA_NONE,
-            QEMU_CAPS_HDA_DUPLEX,
-            QEMU_CAPS_DRIVE_AIO,
-            QEMU_CAPS_CCID_PASSTHRU,
-            QEMU_CAPS_CHARDEV_SPICEVMC,
-            QEMU_CAPS_DEVICE_QXL_VGA,
-            QEMU_CAPS_VIRTIO_TX_ALG,
-            QEMU_CAPS_VIRTIO_IOEVENTFD,
-            QEMU_CAPS_PIIX3_USB_UHCI,
-            QEMU_CAPS_PIIX4_USB_UHCI,
-            QEMU_CAPS_USB_HUB,
-            QEMU_CAPS_NO_SHUTDOWN,
-            QEMU_CAPS_NO_ACPI,
-            QEMU_CAPS_VIRTIO_BLK_SCSI,
-            QEMU_CAPS_BLOCKIO,
-            QEMU_CAPS_VNC,
-            QEMU_CAPS_DEVICE_QXL,
-            QEMU_CAPS_DEVICE_VGA,
-            QEMU_CAPS_DEVICE_CIRRUS_VGA,
-            QEMU_CAPS_DEVICE_VMWARE_SVGA,
-            QEMU_CAPS_DEVICE_USB_SERIAL,
-            QEMU_CAPS_DEVICE_USB_NET,
-            QEMU_CAPS_DEVICE_USB_KBD,
-            QEMU_CAPS_DEVICE_PCI_BRIDGE,
-            QEMU_CAPS_DEVICE_RTL8139,
-            QEMU_CAPS_DEVICE_E1000,
-            QEMU_CAPS_DEVICE_VIRTIO_NET);
-    DO_TEST("qemu-kvm-0.12.1.2-rhel62-beta", 12001, 1, 0,
-            QEMU_CAPS_DRIVE_CACHE_UNSAFE,
-            QEMU_CAPS_KVM,
-            QEMU_CAPS_DRIVE_SERIAL,
-            QEMU_CAPS_MEM_PATH,
-            QEMU_CAPS_CHARDEV,
-            QEMU_CAPS_ENABLE_KVM,
-            QEMU_CAPS_MONITOR_JSON,
-            QEMU_CAPS_NETDEV,
-            QEMU_CAPS_RTC,
-            QEMU_CAPS_VHOST_NET,
-            QEMU_CAPS_NO_KVM_PIT,
-            QEMU_CAPS_TDF,
-            QEMU_CAPS_PCI_CONFIGFD,
-            QEMU_CAPS_NODEFCONFIG,
-            QEMU_CAPS_BOOT_MENU,
-            QEMU_CAPS_NAME_PROCESS,
-            QEMU_CAPS_SMBIOS_TYPE,
-            QEMU_CAPS_VGA_QXL,
-            QEMU_CAPS_SPICE,
-            QEMU_CAPS_VGA_NONE,
-            QEMU_CAPS_BOOTINDEX,
-            QEMU_CAPS_HDA_DUPLEX,
-            QEMU_CAPS_DRIVE_AIO,
-            QEMU_CAPS_PCI_BOOTINDEX,
-            QEMU_CAPS_CCID_PASSTHRU,
-            QEMU_CAPS_CHARDEV_SPICEVMC,
-            QEMU_CAPS_DEVICE_QXL_VGA,
-            QEMU_CAPS_PCI_MULTIFUNCTION,
-            QEMU_CAPS_VIRTIO_IOEVENTFD,
-            QEMU_CAPS_SGA,
-            QEMU_CAPS_VIRTIO_BLK_EVENT_IDX,
-            QEMU_CAPS_VIRTIO_NET_EVENT_IDX,
-            QEMU_CAPS_VIRTIO_TX_ALG,
-            QEMU_CAPS_VIRTIO_IOEVENTFD,
-            QEMU_CAPS_PIIX3_USB_UHCI,
-            QEMU_CAPS_PIIX4_USB_UHCI,
-            QEMU_CAPS_USB_EHCI,
-            QEMU_CAPS_ICH9_USB_EHCI1,
-            QEMU_CAPS_USB_HUB,
-            QEMU_CAPS_NO_SHUTDOWN,
-            QEMU_CAPS_NO_ACPI,
-            QEMU_CAPS_VIRTIO_BLK_SCSI,
-            QEMU_CAPS_DRIVE_COPY_ON_READ,
-            QEMU_CAPS_SCSI_CD,
-            QEMU_CAPS_BLOCKIO,
-            QEMU_CAPS_VNC,
-            QEMU_CAPS_DEVICE_QXL,
-            QEMU_CAPS_DEVICE_VGA,
-            QEMU_CAPS_DEVICE_CIRRUS_VGA,
-            QEMU_CAPS_DEVICE_PCI_BRIDGE,
-            QEMU_CAPS_DEVICE_USB_KBD,
-            QEMU_CAPS_DEVICE_USB_STORAGE,
-            QEMU_CAPS_DEVICE_RTL8139,
-            QEMU_CAPS_DEVICE_E1000,
-            QEMU_CAPS_DEVICE_VIRTIO_NET);
     DO_TEST("qemu-1.0", 1000000, 0, 0,
             QEMU_CAPS_DRIVE_CACHE_UNSAFE,
             QEMU_CAPS_DRIVE_SERIAL,
-- 
2.10.0

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]