Set pciConnectFlags in each device's DeviceInfo prior to assigning PCI
addresses, and then use those flags later when actually assigning the
addresses with qemuDomainPCIAddressReserveNextAddr() (rather than
scattering the logic about which devices need which type of slot all
over the place).
---
src/qemu/qemu_domain_address.c | 234 ++++++++++++++++++-----------------------
1 file changed, 104 insertions(+), 130 deletions(-)
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index 7de081b..ed728f5 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -555,7 +555,7 @@ qemuDomainDeviceConnectFlagsInternal(virDomainDeviceDefPtr dev,
* There is no failure, so there is no return value.
*
*/
-static void ATTRIBUTE_UNUSED
+static void
qemuDomainDeviceConnectFlags(virDomainDefPtr def,
virDomainDeviceDefPtr dev,
virQEMUCapsPtr qemuCaps)
@@ -636,7 +636,7 @@ qemuDomainDeviceConnectFlagsIterator(virDomainDefPtr def ATTRIBUTE_UNUSED,
* 0 on success or -1 on failure (the only possibility of failure would
* be some internal problem with virDomainDeviceInfoIterate())
*/
-static int ATTRIBUTE_UNUSED
+static int
qemuDomainDeviceSetAllConnectFlags(virDomainDefPtr def,
virQEMUCapsPtr qemuCaps)
{
@@ -658,21 +658,20 @@ qemuDomainDeviceSetAllConnectFlags(virDomainDefPtr def,
static int
qemuDomainPCIAddressReserveNextAddr(virDomainPCIAddressSetPtr addrs,
virDomainDeviceInfoPtr dev,
- virDomainPCIConnectFlags flags,
unsigned int function,
bool reserveEntireSlot)
{
- return virDomainPCIAddressReserveNextAddr(addrs, dev, flags,
+ return virDomainPCIAddressReserveNextAddr(addrs, dev,
+ dev->pciConnectFlags,
function, reserveEntireSlot);
}
static int
qemuDomainPCIAddressReserveNextSlot(virDomainPCIAddressSetPtr addrs,
- virDomainDeviceInfoPtr dev,
- virDomainPCIConnectFlags flags)
+ virDomainDeviceInfoPtr dev)
{
- return qemuDomainPCIAddressReserveNextAddr(addrs, dev, flags, 0, true);
+ return qemuDomainPCIAddressReserveNextAddr(addrs, dev, 0, true);
}
@@ -686,9 +685,6 @@ qemuDomainCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
int ret = -1;
virPCIDeviceAddressPtr addr = &info->addr.pci;
bool entireSlot;
- /* flags may be changed from default below */
- virDomainPCIConnectFlags flags = (VIR_PCI_CONNECT_HOTPLUGGABLE |
- VIR_PCI_CONNECT_TYPE_PCI_DEVICE);
if (!virDeviceInfoPCIAddressPresent(info) ||
((device->type == VIR_DOMAIN_DEVICE_HOSTDEV) &&
@@ -700,69 +696,25 @@ qemuDomainCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
return 0;
}
- /* Change flags according to differing requirements of different
- * devices.
+ /* If we get to here, the device has a PCI address assigned in the
+ * config and we should mark it as in-use. But if the
+ * pciConnectFlags are 0, then this device shouldn't have a PCI
+ * address associated with it. *BUT* since there are cases in the
+ * past where we've apparently allowed that, we need to pretend
+ * for now that it's okay, otherwise an existing domain could
+ * "disappear" from the list of domains due to a parse failure. We
+ * can fix this by just forcing the pciConnectFlags to be
+ * PCI_DEVICE (and then relying on validation functions to report
+ * inappropriate address types.
*/
- switch (device->type) {
- case VIR_DOMAIN_DEVICE_CONTROLLER:
- switch (device->data.controller->type) {
- case VIR_DOMAIN_CONTROLLER_TYPE_PCI:
- flags = virDomainPCIControllerModelToConnectType(device->data.controller->model);
- break;
-
- case VIR_DOMAIN_CONTROLLER_TYPE_SATA:
- /* SATA controllers aren't hot-plugged, and can be put in
- * either a PCI or PCIe slot
- */
- flags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE
- | VIR_PCI_CONNECT_TYPE_PCIE_DEVICE);
- break;
-
- case VIR_DOMAIN_CONTROLLER_TYPE_USB:
- /* allow UHCI and EHCI controllers to be manually placed on
- * the PCIe bus (but don't put them there automatically)
- */
- switch (device->data.controller->model) {
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_EHCI:
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_EHCI1:
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI1:
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI2:
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI3:
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_VT82C686B_UHCI:
- flags = VIR_PCI_CONNECT_TYPE_PCI_DEVICE;
- break;
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_NEC_XHCI:
- /* should this be PCIE-only? Or do we need to allow PCI
- * for backward compatibility?
- */
- flags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE
- | VIR_PCI_CONNECT_TYPE_PCIE_DEVICE);
- break;
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_PCI_OHCI:
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_PIIX3_UHCI:
- case VIR_DOMAIN_CONTROLLER_MODEL_USB_PIIX4_UHCI:
- /* Allow these for PCI only */
- break;
- }
- }
- break;
-
- case VIR_DOMAIN_DEVICE_SOUND:
- switch (device->data.sound->model) {
- case VIR_DOMAIN_SOUND_MODEL_ICH6:
- case VIR_DOMAIN_SOUND_MODEL_ICH9:
- flags = VIR_PCI_CONNECT_TYPE_PCI_DEVICE;
- break;
- }
- break;
-
- case VIR_DOMAIN_DEVICE_VIDEO:
- /* video cards aren't hot-plugged, and can be put in either a
- * PCI or PCIe slot
- */
- flags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE
- | VIR_PCI_CONNECT_TYPE_PCIE_DEVICE);
- break;
+ if (info->pciConnectFlags == 0) {
+ char *addrStr = virDomainPCIAddressAsString(&info->addr.pci);
+
+ VIR_WARN("qemuDomainDeviceConnectFlagsInternal() thinks that the "
+ "device with PCI address %s should not have a PCI address",
+ addrStr ? addrStr : "(unknown)");
+ VIR_FREE(addrStr);
+ info->pciConnectFlags = VIR_PCI_CONNECT_TYPE_PCI_DEVICE;
}
/* Ignore implicit controllers on slot 0:0:1.0:
@@ -807,7 +759,7 @@ qemuDomainCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
entireSlot = (addr->function == 0 &&
addr->multi != VIR_TRISTATE_SWITCH_ON);
- if (virDomainPCIAddressReserveAddr(addrs, addr, flags,
+ if (virDomainPCIAddressReserveAddr(addrs, addr, info->pciConnectFlags,
entireSlot, true) < 0)
goto cleanup;
@@ -962,8 +914,7 @@ qemuDomainValidateDevicePCISlotsPIIX3(virDomainDefPtr def,
if (virDomainPCIAddressSlotInUse(addrs, &tmp_addr)) {
if (qemuDeviceVideoUsable) {
if (qemuDomainPCIAddressReserveNextSlot(addrs,
- &primaryVideo->info,
- flags) < 0)
+ &primaryVideo->info) < 0)
goto cleanup;
} else {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
@@ -1155,8 +1106,7 @@ qemuDomainValidateDevicePCISlotsQ35(virDomainDefPtr def,
if (virDomainPCIAddressSlotInUse(addrs, &tmp_addr)) {
if (qemuDeviceVideoUsable) {
if (qemuDomainPCIAddressReserveNextSlot(addrs,
- &primaryVideo->info,
- flags) < 0)
+ &primaryVideo->info) < 0)
goto cleanup;
} else {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
@@ -1276,7 +1226,6 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
virDomainPCIAddressSetPtr addrs)
{
size_t i, j;
- virDomainPCIConnectFlags flags = 0; /* initialize to quiet gcc warning */
/* PCI controllers */
for (i = 0; i < def->ncontrollers; i++) {
@@ -1294,28 +1243,18 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
* flag to use when searching for the proper
* controller/bus to connect it to on the upstream side.
*/
- flags = virDomainPCIControllerModelToConnectType(model);
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &cont->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &cont->info) < 0)
goto error;
}
}
- /* all other devices that plug into a PCI slot are treated as a
- * PCI endpoint devices that require a hotplug-capable slot
- * (except for some special cases which have specific handling
- * below)
- */
- flags = VIR_PCI_CONNECT_HOTPLUGGABLE | VIR_PCI_CONNECT_TYPE_PCI_DEVICE;
-
for (i = 0; i < def->nfss; i++) {
if (!virDeviceInfoPCIAddressWanted(&def->fss[i]->info))
continue;
/* Only support VirtIO-9p-pci so far. If that changes,
* we might need to skip devices here */
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->fss[i]->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->fss[i]->info) < 0)
goto error;
}
@@ -1325,27 +1264,31 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
* in hostdevs list anyway, so handle them with other hostdevs
* instead of here.
*/
- if ((def->nets[i]->type == VIR_DOMAIN_NET_TYPE_HOSTDEV) ||
- !virDeviceInfoPCIAddressWanted(&def->nets[i]->info)) {
+ virDomainNetDefPtr net = def->nets[i];
+
+ if ((net->type == VIR_DOMAIN_NET_TYPE_HOSTDEV) ||
+ !virDeviceInfoPCIAddressWanted(&net->info)) {
continue;
}
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->nets[i]->info,
- flags) < 0)
+
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &net->info) < 0)
goto error;
}
/* Sound cards */
for (i = 0; i < def->nsounds; i++) {
- if (!virDeviceInfoPCIAddressWanted(&def->sounds[i]->info))
+ virDomainSoundDefPtr sound = def->sounds[i];
+
+ if (!virDeviceInfoPCIAddressWanted(&sound->info))
continue;
+
/* Skip ISA sound card, PCSPK and usb-audio */
- if (def->sounds[i]->model == VIR_DOMAIN_SOUND_MODEL_SB16 ||
- def->sounds[i]->model == VIR_DOMAIN_SOUND_MODEL_PCSPK ||
- def->sounds[i]->model == VIR_DOMAIN_SOUND_MODEL_USB)
+ if (sound->model == VIR_DOMAIN_SOUND_MODEL_SB16 ||
+ sound->model == VIR_DOMAIN_SOUND_MODEL_PCSPK ||
+ sound->model == VIR_DOMAIN_SOUND_MODEL_USB)
continue;
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->sounds[i]->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &sound->info) < 0)
goto error;
}
@@ -1412,7 +1355,8 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
if (foundAddr) {
/* Reserve this function on the slot we found */
- if (virDomainPCIAddressReserveAddr(addrs, &addr, flags,
+ if (virDomainPCIAddressReserveAddr(addrs, &addr,
+ def->controllers[i]->info.pciConnectFlags,
false, true) < 0)
goto error;
@@ -1421,16 +1365,15 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
} else {
/* This is the first part of the controller, so need
* to find a free slot & then reserve this function */
- if (qemuDomainPCIAddressReserveNextAddr(addrs, &cont->info, flags,
+ if (qemuDomainPCIAddressReserveNextAddr(addrs, &cont->info,
addr.function, false) < 0)
goto error;
cont->info.addr.pci.multi = addr.multi;
}
} else {
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &cont->info,
- flags) < 0)
- goto error;
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &cont->info) < 0)
+ goto error;
}
}
@@ -1461,8 +1404,7 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
goto error;
}
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->disks[i]->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->disks[i]->info) < 0)
goto error;
}
@@ -1474,8 +1416,8 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
def->hostdevs[i]->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
- if (qemuDomainPCIAddressReserveNextSlot(addrs, def->hostdevs[i]->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs,
+ def->hostdevs[i]->info) < 0)
goto error;
}
@@ -1484,8 +1426,8 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
def->memballoon->model == VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO &&
virDeviceInfoPCIAddressWanted(&def->memballoon->info)) {
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->memballoon->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs,
+ &def->memballoon->info) < 0)
goto error;
}
@@ -1495,8 +1437,7 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
!virDeviceInfoPCIAddressWanted(&def->rngs[i]->info))
continue;
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->rngs[i]->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->rngs[i]->info) < 0)
goto error;
}
@@ -1504,8 +1445,7 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
if (def->watchdog &&
def->watchdog->model == VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB &&
virDeviceInfoPCIAddressWanted(&def->watchdog->info)) {
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->watchdog->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->watchdog->info) < 0)
goto error;
}
@@ -1513,8 +1453,7 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
* assigned address. */
if (def->nvideos > 0 &&
virDeviceInfoPCIAddressWanted(&def->videos[0]->info)) {
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->videos[0]->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->videos[0]->info) < 0)
goto error;
}
@@ -1527,8 +1466,8 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
}
if (!virDeviceInfoPCIAddressWanted(&def->videos[i]->info))
continue;
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->videos[i]->info,
- flags) < 0)
+
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->videos[i]->info) < 0)
goto error;
}
@@ -1537,8 +1476,7 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
if (!virDeviceInfoPCIAddressWanted(&def->shmems[i]->info))
continue;
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->shmems[i]->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->shmems[i]->info) < 0)
goto error;
}
for (i = 0; i < def->ninputs; i++) {
@@ -1546,8 +1484,7 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
!virDeviceInfoPCIAddressWanted(&def->inputs[i]->info))
continue;
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->inputs[i]->info,
- flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &def->inputs[i]->info) < 0)
goto error;
}
for (i = 0; i < def->nparallels; i++) {
@@ -1560,7 +1497,7 @@ qemuDomainAssignDevicePCISlots(virDomainDefPtr def,
!virDeviceInfoPCIAddressWanted(&chr->info))
continue;
- if (qemuDomainPCIAddressReserveNextSlot(addrs, &chr->info, flags) < 0)
+ if (qemuDomainPCIAddressReserveNextSlot(addrs, &chr->info) < 0)
goto error;
}
for (i = 0; i < def->nchannels; i++) {
@@ -1715,8 +1652,6 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
int rv;
bool buses_reserved = true;
- virDomainPCIConnectFlags flags = VIR_PCI_CONNECT_TYPE_PCI_DEVICE;
-
for (i = 0; i < def->ncontrollers; i++) {
if (def->controllers[i]->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI) {
if ((int) def->controllers[i]->idx > max_idx)
@@ -1726,10 +1661,23 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
nbuses = max_idx + 1;
+ /* set the connect type flags (pci vs. pcie) in the DeviceInfo
+ * of all devices. This will be used to pick an appropriate
+ * bus when assigning addresses.
+ */
+ if (qemuDomainDeviceSetAllConnectFlags(def, qemuCaps) < 0)
+ goto cleanup;
+
if (nbuses > 0 &&
virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_PCI_BRIDGE)) {
+ /* This is a dummy info used to reserve a slot for a legacy
+ * PCI device that doesn't exist, but may in the future, e.g.
+ * if another device is hotplugged into the domain.
+ */
virDomainDeviceInfo info;
+ info.pciConnectFlags = VIR_PCI_CONNECT_TYPE_PCI_DEVICE;
+
/* 1st pass to figure out how many PCI bridges we need */
if (!(addrs = qemuDomainPCIAddressSetCreate(def, nbuses, true)))
goto cleanup;
@@ -1753,24 +1701,50 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
*/
if (!buses_reserved &&
!qemuDomainMachineIsVirt(def) &&
- qemuDomainPCIAddressReserveNextSlot(addrs, &info, flags) < 0)
+ qemuDomainPCIAddressReserveNextSlot(addrs, &info) < 0)
goto cleanup;
if (qemuDomainAssignDevicePCISlots(def, qemuCaps, addrs) < 0)
goto cleanup;
for (i = 1; i < addrs->nbuses; i++) {
+ virDomainDeviceDef dev;
+ int contIndex;
virDomainPCIAddressBusPtr bus = &addrs->buses[i];
if ((rv = virDomainDefMaybeAddController(
def, VIR_DOMAIN_CONTROLLER_TYPE_PCI,
i, bus->model)) < 0)
goto cleanup;
- /* If we added a new bridge, we will need one more address */
- if (rv > 0 &&
- qemuDomainPCIAddressReserveNextSlot(addrs, &info, flags) < 0)
+
+ if (rv == 0)
+ continue; /* no new controller added */
+
+ /* We did add a new controller, so we will need one more
+ * address (and we need to set the new controller's
+ * pciConnectFlags)
+ */
+ contIndex = virDomainControllerFind(def,
+ VIR_DOMAIN_CONTROLLER_TYPE_PCI,
+ i);
+ if (contIndex < 0) {
+ /* this should never happen - we just added it */
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Could not find auto-added %s controller "
+ "with index %zu"),
+ virDomainControllerModelPCITypeToString(bus->model),
+ i);
+ goto cleanup;
+ }
+ dev.type = VIR_DOMAIN_DEVICE_CONTROLLER;
+ dev.data.controller = def->controllers[contIndex];
+ /* set connect flags so it will be properly addressed */
+ qemuDomainDeviceConnectFlags(def, &dev, qemuCaps);
+ if (qemuDomainPCIAddressReserveNextSlot(addrs,
+ &dev.data.controller->info) < 0)
goto cleanup;
}
+
nbuses = addrs->nbuses;
virDomainPCIAddressSetFree(addrs);
addrs = NULL;
--
2.7.4
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list