[Resending after the release of 2.2.0; no changes other than a rebase
to current master and the associated tweaking to the capabilities patch]
This patch series provides a libvirt implementation of the vhost-scsi
interface in QEMU. As near as I can see, this was discussed upstream in
July 2014[1], and ended in a desire to replace a vhost-scsi controller
in favor of a hostdev element instead[2].
There is no capability check in this series for vhost-scsi in the underlying
QEMU. Using a recent QEMU built with --disable-vhost-scsi fails with "not a
valid device model name."
Host Filesystem Example:
# ls /sys/kernel/config/target/vhost/
discovery_auth naa.5001405df3e54061 version
# ls /sys/kernel/config/target/vhost/naa.5001405df3e54061/tpgt_1/lun/
lun_0
QEMU Example (snippet):
-device vhost-scsi-ccw,wwpn=naa.5001405df3e54061,devno=fe.0.1000
Libvirt Example (snippet):
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn='naa.5001405df3e54061'/>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x1000'/>
</hostdev>
Guest Viewpoint:
# lsscsi
[1:0:1:0] disk LIO-ORG disk0 4.0 /dev/sda
# dmesg | grep 1:
[ 6.065735] scsi host1: Virtio SCSI HBA
[ 6.093892] scsi 1:0:1:0: Direct-Access LIO-ORG disk0 4.0 PQ: 0 ANSI: 5
[ 6.313615] sd 1:0:1:0: Attached scsi generic sg0 type 0
[ 6.314981] sd 1:0:1:0: [sda] 29360128 512-byte logical blocks: (15.0 GB/14.0 GiB)
[ 6.317290] sd 1:0:1:0: [sda] Write Protect is off
[ 6.317566] sd 1:0:1:0: [sda] Mode Sense: 43 00 10 08
[ 6.317853] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 6.352722] sd 1:0:1:0: [sda] Attached SCSI disk
Changelog:
v2->v2.1:
- Rebased to current master (6 September)
v1->v2: https://www.redhat.com/archives/libvir-list/2016-August/msg01028.html
- Rebase
- Applies to current master (20 August)
- Added a capability check for QEMU 2.7
- Fixed the qemuxml2argv tests as the -smp options had changed
- Reworked ccwaddrs parameter in virDomainCCWAddressAssign call
- Comments
- Squashed documentation, XML schema, XML parsing, and infrastructure
patches into a single patch
- Switched from "hostdev type='scsi'" to "hostdev type='scsi_host'";
this removes the refactoring patches since we're not shoe-horning
a new SCSI protocol into the existing code
- Reworked the handling of the fd's such that we send them to qemu
after any possible errors could occur and cause us to back out
- s/qemuBuildSCSIVhostHostdevDevStr/qemuBuildHostHostdevDevStr/
- Added virBufferCheckError, and an error message for vhostfdSize > 1,
in qemuBuildHostHostdevDevStr
- Added qemuBuildDeviceAddressStr in qemuBuildHostHostdevDevStr, thus
superceding the last patch in the v1 series
- Other
- Simplified the vhostfd logic to just be a single int, rather than
an alloc'd array (left the vhostfdSize described above as an
identifier for if QEMU ever supports multiple vhostfds)
- Replaced "qemuMonitorAddDevice" with "qemuMonitorAddDeviceWithFd"
in hotplug routine
v1: https://www.redhat.com/archives/libvir-list/2016-July/msg01004.html
[1] http://www.redhat.com/archives/libvir-list/2014-July/msg01235.html
[2] http://www.redhat.com/archives/libvir-list/2014-July/msg01390.html
Eric Farman (5):
Introduce a "scsi_host" hostdev type
qemu: Introduce vhost-scsi capability
qemu: Add vhost-scsi string for -device parameter
qemu: Allow hotplug of vhost-scsi device
tests: Introduce basic vhost-scsi test
docs/formatdomain.html.in | 24 ++++
docs/schemas/domaincommon.rng | 23 ++++
src/conf/domain_audit.c | 2 +
src/conf/domain_conf.c | 62 ++++++++-
src/conf/domain_conf.h | 17 +++
src/libvirt_private.syms | 1 +
src/qemu/qemu_capabilities.c | 3 +
src/qemu/qemu_capabilities.h | 3 +
src/qemu/qemu_command.c | 80 +++++++++++
src/qemu/qemu_command.h | 6 +
src/qemu/qemu_domain_address.c | 10 ++
src/qemu/qemu_hotplug.c | 149 +++++++++++++++++++++
src/security/security_dac.c | 2 +
src/util/virscsi.c | 26 ++++
src/util/virscsi.h | 1 +
tests/domaincapsschemadata/full.xml | 1 +
tests/qemucapabilitiesdata/caps_1.5.3.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_1.6.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_1.7.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_2.1.1.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_2.4.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_2.5.0.x86_64.xml | 1 +
.../caps_2.6.0-gicv2.aarch64.xml | 1 +
.../caps_2.6.0-gicv3.aarch64.xml | 1 +
tests/qemucapabilitiesdata/caps_2.6.0.ppc64le.xml | 1 +
tests/qemucapabilitiesdata/caps_2.6.0.x86_64.xml | 1 +
tests/qemucapabilitiesdata/caps_2.7.0.x86_64.xml | 1 +
.../qemuxml2argv-hostdev-scsi-vhost-scsi.args | 24 ++++
.../qemuxml2argv-hostdev-scsi-vhost-scsi.xml | 33 +++++
tests/qemuxml2argvmock.c | 12 ++
tests/qemuxml2argvtest.c | 3 +
31 files changed, 491 insertions(+), 2 deletions(-)
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-vhost-scsi.args
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-vhost-scsi.xml
--
1.9.1
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list