A simpe getopt-based argument parser is added for the /usr/sbin/bhyve command, loosely based on its argument parser, which reads the following from the bhyve command line string: * vm name * number of vcpus * memory size * the time offset (UTC or localtime) * features: * acpi * ioapic: While this flag is deprecated in FreeBSD r257423, keep checking for it for backwards compatibiility. * the domain UUID; if not explicitely given, one will be generated. * lpc devices: for now only the com1 and com2 are supported. It is required for these to be /dev/nmdm[\d+][AB], and the slave devices are automatically inferred from these to be the corresponding end of the virtual null-modem cable: /dev/nmdm<N>A <-> /dev/nmdm<N>B * PCI devices: * Disks: these are numbered in the order they are found, for virtio and ahci disks separately. The destination is set to sdX or vdX with X='a'+index; therefore only 'z'-'a' disks are supported. Disks are considered to be block devices if the path starts with /dev, otherwise they are considered to be files. * Networks: only tap devices are supported. Since it isn't possible to tell the type of the network, VIR_DOMAIN_NET_TYPE_ETHERNET is assumed, since it is the most generic. If no mac is specified, one will be generated. Signed-off-by: Fabian Freyer <fabian.freyer@xxxxxxxxxxxxxxxxxxx> --- src/bhyve/bhyve_parse_command.c | 512 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 510 insertions(+), 2 deletions(-) diff --git a/src/bhyve/bhyve_parse_command.c b/src/bhyve/bhyve_parse_command.c index 0c4d3f5..fa11443 100644 --- a/src/bhyve/bhyve_parse_command.c +++ b/src/bhyve/bhyve_parse_command.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006-2016 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange + * Copyright (c) 2011 NetApp, Inc. * Copyright (C) 2016 Fabian Freyer * * This library is free software; you can redistribute it and/or @@ -23,6 +24,8 @@ */ #include <config.h> +#include <libutil.h> +#include <getopt_int.h> #include "bhyve_capabilities.h" #include "bhyve_command.h" @@ -84,6 +87,35 @@ bhyveParseCommandLineUnescape(const char *command) } /* + * This function is adapted from vm_parse_memsize in + * /lib/libvmmapi/vmmapi.c in the FreeBSD Source tree. + */ +static int +bhyveParseMemsize(const char *arg, size_t *ret_memsize) +{ + size_t val; + int error; + + if (virStrToLong_ul(arg, NULL, 10, &val) == 0) { + /* + * For the sake of backward compatibility if the memory size + * specified on the command line is less than a megabyte then + * it is interpreted as being in units of MB. + */ + if (val < 1024 * 1024UL) + val *= 1024 * 1024UL; + *ret_memsize = val; + error = 0; + } else + error = expand_number(arg, ret_memsize); + + /* use memory in KiB here */ + *ret_memsize /= 1024UL; + + return error; +} + +/* * Try to extract loader and bhyve argv lists from a command line string. */ static int @@ -224,10 +256,483 @@ bhyveCommandLineToArgv(const char *nativeConfig, return -1; } +static int +bhyveParseBhyveLPCArg(virDomainDefPtr def, + unsigned caps ATTRIBUTE_UNUSED, + const char *arg) +{ + /* -l emulation[,config] */ + const char *separator = NULL; + const char *param = NULL; + size_t last = 0; + virDomainChrDefPtr chr = NULL; + char *type = NULL; + + separator = strchr(arg, ','); + param = separator + 1; + + if (!separator) + goto error; + + if (VIR_STRNDUP(type, arg, separator - arg) < 0) + goto error; + + /* Only support com%d */ + if (STRPREFIX(type, "com") && type[4] == 0) { + if (!(chr = virDomainChrDefNew())) + goto error; + + chr->source.type = VIR_DOMAIN_CHR_TYPE_NMDM; + chr->deviceType = VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL; + + if (!STRPREFIX(param, "/dev/nmdm")) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to set com port %s: does not start with " + "'/dev/nmdm'."), type); + goto error; + } + + if (VIR_STRDUP(chr->source.data.file.path, param) < 0) { + virDomainChrDefFree(chr); + goto error; + } + + if (VIR_STRDUP(chr->source.data.nmdm.slave, chr->source.data.file.path) + < 0) { + virDomainChrDefFree(chr); + goto error; + } + + /* If the last character of the master is 'A', the slave will be 'B' + * and vice versa */ + last = strlen(chr->source.data.file.path) - 1; + switch (chr->source.data.file.path[last]) { + case 'A': + chr->source.data.nmdm.slave[last] = 'B'; + break; + case 'B': + chr->source.data.nmdm.slave[last] = 'A'; + break; + default: + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to set slave for %s: last letter not " + "'A' or 'B'"), + chr->source.data.file.path); + goto error; + } + + switch (type[3]-'0') { + case 1: + case 2: + chr->target.port = type[3] - '1'; + break; + default: + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to parse %s: only com1 and com2" + "supported."), type); + virDomainChrDefFree(chr); + goto error; + break; + } + + if (VIR_APPEND_ELEMENT(def->serials, def->nserials, chr) < 0) { + virDomainChrDefFree(chr); + goto error; + } + } + + VIR_FREE(type); + return 0; + +error: + VIR_FREE(chr); + VIR_FREE(type); + return -1; +} + +static int +bhyveParsePCISlot(const char *slotdef, + unsigned *pcislot, + unsigned *bus, + unsigned *function) +{ + /* slot[:function] | bus:slot:function */ + const char *curr = NULL; + const char *next = NULL; + unsigned values[3]; + int i; + + curr = slotdef; + for (i = 0; i < 3; i++) { + char *val = NULL; + + next = strchr(curr, ':'); + + if (VIR_STRNDUP(val, curr, next? next - curr : -1) < 0) + goto error; + + if (virStrToLong_ui(val, NULL, 10, &values[i]) < 0) + goto error; + + VIR_FREE(val); + + if (!next) + break; + + curr = next +1; + } + + *bus = 0; + *pcislot = 0; + *function = 0; + + switch (i + 1) { + case 2: + /* pcislot[:function] */ + *function = values[1]; + case 1: + *pcislot = values[0]; + break; + case 3: + /* bus:pcislot:function */ + *bus = values[0]; + *pcislot = values[1]; + *function = values[2]; + break; + } + + return 0; +error: + return -1; +} + +static int +bhyveParsePCIDisk(virDomainDefPtr def, + unsigned caps ATTRIBUTE_UNUSED, + unsigned pcislot, + unsigned pcibus, + unsigned function, + int bus, + int device, + unsigned *nvirtiodisk, + unsigned *nahcidisk, + char *config) +{ + /* -s slot,virtio-blk|ahci-cd|ahci-hd,/path/to/file */ + const char *separator = NULL; + int index = -1; + virDomainDiskDefPtr disk = NULL; + + if (VIR_ALLOC(disk) < 0) + goto cleanup; + if (VIR_ALLOC(disk->src) < 0) + goto error; + + disk->bus = bus; + disk->device = device; + + disk->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; + disk->info.addr.pci.slot = pcislot; + disk->info.addr.pci.bus = pcibus; + disk->info.addr.pci.function = function; + + if (STRPREFIX(config, "/dev/")) + disk->src->type = VIR_STORAGE_TYPE_BLOCK; + else + disk->src->type = VIR_STORAGE_TYPE_FILE; + + if (!config) + goto error; + + separator = strchr(config, ','); + if (VIR_STRNDUP(disk->src->path, config, + separator? separator - config : -1) < 0) + goto error; + + if (bus == VIR_DOMAIN_DISK_BUS_VIRTIO) { + index = *nvirtiodisk; + *nvirtiodisk += 1; + if (VIR_STRDUP(disk->dst, "vda") < 0) + goto error; + } else if (bus == VIR_DOMAIN_DISK_BUS_SATA) { + index = *nahcidisk; + *nahcidisk += 1; + if (VIR_STRDUP(disk->dst, "sda") < 0) + goto error; + } + + if (index > 'z' - 'a') { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("too many disks")); + goto error; + } + + disk->dst[2] = 'a' + index; + + if (VIR_APPEND_ELEMENT(def->disks, def->ndisks, disk) < 0) + goto error; + +cleanup: + return 0; + +error: + virDomainDiskDefFree(disk); + return -1; +} + +static int +bhyveParsePCINet(virDomainDefPtr def, + virDomainXMLOptionPtr xmlopt, + unsigned caps ATTRIBUTE_UNUSED, + unsigned pcislot, + unsigned pcibus, + unsigned function, + const char *config) +{ + /* -s slot,virtio-net,tapN[,mac=xx:xx:xx:xx:xx:xx] */ + + virDomainNetDefPtr net = NULL; + const char *separator = NULL; + const char *mac = NULL; + + if (VIR_ALLOC(net) < 0) + goto cleanup; + + /* Let's just assume it is VIR_DOMAIN_NET_TYPE_ETHERNET, it could also be + * a bridge, but this is the most generic option. */ + net->type = VIR_DOMAIN_NET_TYPE_ETHERNET; + + net->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; + net->info.addr.pci.slot = pcislot; + net->info.addr.pci.bus = pcibus; + net->info.addr.pci.function = function; + + if (!config) + goto error; + + if (!STRPREFIX(config, "tap")) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Only tap devices supported.")); + goto error; + } + + separator = strchr(config, ','); + if (VIR_STRNDUP(net->ifname, config, + separator? separator - config : -1) < 0) + goto error; + + if (!separator) + goto cleanup; + + if (!STRPREFIX(++separator, "mac=")) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Only mac option can be specified for virt-net")); + goto error; + } + mac = separator + 4; + + if (virMacAddrParse(mac, &net->mac) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("unable to parse mac address '%s'"), + mac); + goto cleanup; + } + +cleanup: + if (!mac) + virDomainNetGenerateMAC(xmlopt, &net->mac); + + if (VIR_APPEND_ELEMENT(def->nets, def->nnets, net) < 0) + goto error; + return 0; + +error: + virDomainNetDefFree(net); + return -1; +} + +static int +bhyveParseBhyvePCIArg(virDomainDefPtr def, + virDomainXMLOptionPtr xmlopt, + unsigned caps, + unsigned *nvirtiodisk, + unsigned *nahcidisk, + const char *arg) +{ + /* -s slot,emulation[,conf] */ + const char *separator = NULL; + char *slotdef = NULL; + char *emulation = NULL; + char *conf = NULL; + unsigned pcislot, bus, function; + + separator = strchr(arg, ','); + + if (!separator) + goto error; + else + separator++; /* Skip comma */ + + if (VIR_STRNDUP(slotdef, arg, separator - arg - 1) < 0) + goto error; + + conf = strchr(separator+1, ','); + if (conf) + conf++; /* Skip initial comma */ + + if (VIR_STRNDUP(emulation, separator, conf? conf - separator - 1 : -1) < 0) + goto error; + + if (bhyveParsePCISlot(slotdef, &pcislot, &bus, &function) < 0) + goto error; + + if (STREQ(emulation, "ahci-cd")) + bhyveParsePCIDisk(def, caps, pcislot, bus, function, + VIR_DOMAIN_DISK_BUS_SATA, + VIR_DOMAIN_DISK_DEVICE_CDROM, + nvirtiodisk, + nahcidisk, + conf); + else if (STREQ(emulation, "ahci-hd")) + bhyveParsePCIDisk(def, caps, pcislot, bus, function, + VIR_DOMAIN_DISK_BUS_SATA, + VIR_DOMAIN_DISK_DEVICE_DISK, + nvirtiodisk, + nahcidisk, + conf); + else if (STREQ(emulation, "virtio-blk")) + bhyveParsePCIDisk(def, caps, pcislot, bus, function, + VIR_DOMAIN_DISK_BUS_VIRTIO, + VIR_DOMAIN_DISK_DEVICE_DISK, + nvirtiodisk, + nahcidisk, + conf); + else if (STREQ(emulation, "virtio-net")) + bhyveParsePCINet(def, xmlopt, caps, pcislot, bus, function, conf); + + VIR_FREE(emulation); + VIR_FREE(slotdef); + return 0; +error: + VIR_FREE(emulation); + VIR_FREE(slotdef); + return -1; +} + +/* + * Parse the /usr/sbin/bhyve command line. + */ +static int +bhyveParseBhyveCommandLine(virDomainDefPtr def, + virDomainXMLOptionPtr xmlopt, + unsigned caps, + int argc, char **argv) +{ + int c; + const char optstr[] = "abehuwxACHIPSWYp:g:c:s:m:l:U:"; + int vcpus = 1; + size_t memory = 0; + unsigned nahcidisks = 0; + unsigned nvirtiodisks = 0; + struct _getopt_data *parser; + + if (!argv) + goto error; + + if (VIR_ALLOC(parser) < 0) + goto error; + + while ((c = _getopt_internal_r(argc, argv, optstr, + NULL, NULL, 0, parser, 0)) != -1) { + switch (c) { + case 'A': + def->features[VIR_DOMAIN_FEATURE_ACPI] = VIR_TRISTATE_SWITCH_ON; + break; + case 'c': + if (virStrToLong_i(parser->optarg, NULL, 10, &vcpus) < 0) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to parse number of vCPUs.")); + goto error; + } + if (virDomainDefSetVcpusMax(def, vcpus) < 0) + goto error; + if (virDomainDefSetVcpus(def, vcpus) < 0) + goto error; + break; + case 'l': + if (bhyveParseBhyveLPCArg(def, caps, parser->optarg)) + goto error; + break; + case 's': + if (bhyveParseBhyvePCIArg(def, + xmlopt, + caps, + &nahcidisks, + &nvirtiodisks, + parser->optarg)) + goto error; + break; + case 'm': + if (bhyveParseMemsize(parser->optarg, &memory)) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to parse Memory.")); + goto error; + } + if (def->mem.cur_balloon != 0 && def->mem.cur_balloon != memory) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to parse Memory: Memory size mismatch.")); + goto error; + } + def->mem.cur_balloon = memory; + virDomainDefSetMemoryTotal(def, memory); + break; + case 'I': + /* While this flag was deprecated in FreeBSD r257423, keep checking + * for it for backwards compatibility. */ + def->features[VIR_DOMAIN_FEATURE_APIC] = VIR_TRISTATE_SWITCH_ON; + break; + case 'u': + def->clock.offset = VIR_DOMAIN_CLOCK_OFFSET_UTC; + break; + case 'U': + if (virUUIDParse(parser->optarg, def->uuid) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, \ + _("cannot parse UUID '%s'"), parser->optarg); + goto error; + } + break; + } + } + + if (argc != parser->optind) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to parse arguments for bhyve command.")); + goto error; + } + + if (def->name == NULL) { + if (VIR_STRDUP(def->name, argv[argc]) < 0) + goto error; + } else if (STRNEQ(def->name, argv[argc])) { + /* the vm name of the loader and the bhyverun command differ, throw an + * error here */ + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to parse arguments: VM name mismatch.")); + goto error; + } + + VIR_FREE(parser); + return 0; + +error: + VIR_FREE(parser); + return -1; +} + virDomainDefPtr bhyveParseCommandLineString(const char* nativeConfig, - unsigned caps ATTRIBUTE_UNUSED, - virDomainXMLOptionPtr xmlopt ATTRIBUTE_UNUSED) + unsigned caps, + virDomainXMLOptionPtr xmlopt) { virDomainDefPtr def = NULL; int bhyve_argc = 0; @@ -257,6 +762,9 @@ bhyveParseCommandLineString(const char* nativeConfig, goto error; } + if (bhyveParseBhyveCommandLine(def, xmlopt, caps, bhyve_argc, bhyve_argv)) + goto error; + cleanup: virStringFreeList(loader_argv); virStringFreeList(bhyve_argv); -- 2.5.5
Attachment:
signature.asc
Description: OpenPGP digital signature
-- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list