[PATCH 1/7] Remove qemuProcessInitPCIAddresses with dependencies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It was only called for QEMUs without QEMU_CAPS_DEVICE,
which we no longer support.
---
 src/qemu/qemu_monitor.c      |  15 --
 src/qemu/qemu_monitor.h      |  10 --
 src/qemu/qemu_monitor_json.c |   9 -
 src/qemu/qemu_monitor_json.h |   3 -
 src/qemu/qemu_monitor_text.c | 126 -------------
 src/qemu/qemu_monitor_text.h |   3 -
 src/qemu/qemu_process.c      | 410 -------------------------------------------
 7 files changed, 576 deletions(-)

diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index 1f402ee..7d1ca91 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -2695,21 +2695,6 @@ qemuMonitorGetChardevInfo(qemuMonitorPtr mon,
 }
 
 
-int
-qemuMonitorGetAllPCIAddresses(qemuMonitorPtr mon,
-                              qemuMonitorPCIAddress **addrs)
-{
-    VIR_DEBUG("addrs=%p", addrs);
-
-    QEMU_CHECK_MONITOR(mon);
-
-    if (mon->json)
-        return qemuMonitorJSONGetAllPCIAddresses(mon, addrs);
-    else
-        return qemuMonitorTextGetAllPCIAddresses(mon, addrs);
-}
-
-
 /**
  * qemuMonitorDriveDel:
  * @mon: monitor object
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index 4d8f21f..6359314 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -677,16 +677,6 @@ int qemuMonitorAttachPCIDiskController(qemuMonitorPtr mon,
                                        const char *bus,
                                        virPCIDeviceAddress *guestAddr);
 
-typedef struct _qemuMonitorPCIAddress qemuMonitorPCIAddress;
-struct _qemuMonitorPCIAddress {
-    unsigned int vendor;
-    unsigned int product;
-    virPCIDeviceAddress addr;
-};
-
-int qemuMonitorGetAllPCIAddresses(qemuMonitorPtr mon,
-                                  qemuMonitorPCIAddress **addrs);
-
 int qemuMonitorAddDevice(qemuMonitorPtr mon,
                          const char *devicestr);
 
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index 1790e4d..64a8765 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -3568,15 +3568,6 @@ qemuMonitorJSONGetChardevInfo(qemuMonitorPtr mon,
 }
 
 
-int qemuMonitorJSONGetAllPCIAddresses(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
-                                      qemuMonitorPCIAddress **addrs ATTRIBUTE_UNUSED)
-{
-    virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
-                   _("query-pci not supported in JSON mode"));
-    return -1;
-}
-
-
 int qemuMonitorJSONDelDevice(qemuMonitorPtr mon,
                              const char *devalias)
 {
diff --git a/src/qemu/qemu_monitor_json.h b/src/qemu/qemu_monitor_json.h
index b207e3c..95bba69 100644
--- a/src/qemu/qemu_monitor_json.h
+++ b/src/qemu/qemu_monitor_json.h
@@ -215,9 +215,6 @@ int qemuMonitorJSONAttachPCIDiskController(qemuMonitorPtr mon,
                                            const char *bus,
                                            virPCIDeviceAddress *guestAddr);
 
-int qemuMonitorJSONGetAllPCIAddresses(qemuMonitorPtr mon,
-                                      qemuMonitorPCIAddress **addrs);
-
 int qemuMonitorJSONAddDevice(qemuMonitorPtr mon,
                              const char *devicestr);
 
diff --git a/src/qemu/qemu_monitor_text.c b/src/qemu/qemu_monitor_text.c
index ddf16b2..28a6e1b 100644
--- a/src/qemu/qemu_monitor_text.c
+++ b/src/qemu/qemu_monitor_text.c
@@ -1833,132 +1833,6 @@ int qemuMonitorTextGetChardevInfo(qemuMonitorPtr mon,
 }
 
 
-/*
- * The format we're after looks like this
- *
- *   (qemu) info pci
- *   Bus  0, device   0, function 0:
- *     Host bridge: PCI device 8086:1237
- *       id ""
- *   Bus  0, device   1, function 0:
- *     ISA bridge: PCI device 8086:7000
- *       id ""
- *   Bus  0, device   1, function 1:
- *     IDE controller: PCI device 8086:7010
- *       BAR4: I/O at 0xc000 [0xc00f].
- *       id ""
- *   Bus  0, device   1, function 3:
- *     Bridge: PCI device 8086:7113
- *       IRQ 9.
- *       id ""
- *   Bus  0, device   2, function 0:
- *     VGA controller: PCI device 1013:00b8
- *       BAR0: 32 bit prefetchable memory at 0xf0000000 [0xf1ffffff].
- *       BAR1: 32 bit memory at 0xf2000000 [0xf2000fff].
- *       id ""
- *   Bus  0, device   3, function 0:
- *     Ethernet controller: PCI device 8086:100e
- *      IRQ 11.
- *      BAR0: 32 bit memory at 0xf2020000 [0xf203ffff].
- *      BAR1: I/O at 0xc040 [0xc07f].
- *       id ""
- *
- * Of this, we're interesting in the vendor/product ID
- * and the bus/device/function data.
- */
-#define CHECK_END(p) if (!(p)) break;
-#define SKIP_TO(p, lbl)                                            \
-    (p) = strstr((p), (lbl));                                      \
-    if (p)                                                         \
-        (p) += strlen(lbl);
-#define GET_INT(p, base, val)                                           \
-    if (virStrToLong_ui((p), &(p), (base), &(val)) < 0) {               \
-        virReportError(VIR_ERR_OPERATION_FAILED,                       \
-                       _("cannot parse value for %s"), #val);           \
-        break;                                                          \
-    }
-#define SKIP_SPACE(p)                           \
-    while (*(p) == ' ') (p)++;
-
-int qemuMonitorTextGetAllPCIAddresses(qemuMonitorPtr mon,
-                                      qemuMonitorPCIAddress **retaddrs)
-{
-    char *reply;
-    qemuMonitorPCIAddress *addrs = NULL;
-    int naddrs = 0;
-    char *p;
-
-    *retaddrs = NULL;
-
-    if (qemuMonitorHMPCommand(mon, "info pci", &reply) < 0)
-        return -1;
-
-    p = reply;
-
-
-    while (p) {
-        unsigned int bus, slot, func, vendor, product;
-
-        SKIP_TO(p, "  Bus");
-        CHECK_END(p);
-        SKIP_SPACE(p);
-        GET_INT(p, 10, bus);
-        CHECK_END(p);
-
-        SKIP_TO(p, ", device");
-        CHECK_END(p);
-        SKIP_SPACE(p);
-        GET_INT(p, 10, slot);
-        CHECK_END(p);
-
-        SKIP_TO(p, ", function");
-        CHECK_END(p);
-        SKIP_SPACE(p);
-        GET_INT(p, 10, func);
-        CHECK_END(p);
-
-        SKIP_TO(p, "PCI device");
-        CHECK_END(p);
-        SKIP_SPACE(p);
-        GET_INT(p, 16, vendor);
-        CHECK_END(p);
-
-        if (*p != ':')
-            break;
-        p++;
-        GET_INT(p, 16, product);
-
-        if (VIR_REALLOC_N(addrs, naddrs+1) < 0)
-            goto error;
-
-        addrs[naddrs].addr.domain = 0;
-        addrs[naddrs].addr.bus = bus;
-        addrs[naddrs].addr.slot = slot;
-        addrs[naddrs].addr.function = func;
-        addrs[naddrs].vendor = vendor;
-        addrs[naddrs].product = product;
-        naddrs++;
-
-        VIR_DEBUG("Got dev %d:%d:%d   %x:%x", bus, slot, func, vendor, product);
-    }
-
-    VIR_FREE(reply);
-
-    *retaddrs = addrs;
-
-    return naddrs;
-
- error:
-    VIR_FREE(addrs);
-    VIR_FREE(reply);
-    return -1;
-}
-#undef GET_INT
-#undef SKIP_SPACE
-#undef CHECK_END
-#undef SKIP_TO
-
-
 int qemuMonitorTextDelDevice(qemuMonitorPtr mon,
                              const char *devalias)
 {
diff --git a/src/qemu/qemu_monitor_text.h b/src/qemu/qemu_monitor_text.h
index d30f1a4..eeaca52 100644
--- a/src/qemu/qemu_monitor_text.h
+++ b/src/qemu/qemu_monitor_text.h
@@ -142,9 +142,6 @@ int qemuMonitorTextRemoveNetdev(qemuMonitorPtr mon,
 int qemuMonitorTextGetChardevInfo(qemuMonitorPtr mon,
                                   virHashTablePtr info);
 
-int qemuMonitorTextGetAllPCIAddresses(qemuMonitorPtr mon,
-                                      qemuMonitorPCIAddress **addrs);
-
 int qemuMonitorTextAddDevice(qemuMonitorPtr mon,
                              const char *devicestr);
 
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index f4bf6c1..40c238b 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -2441,400 +2441,6 @@ qemuProcessInitPasswords(virConnectPtr conn,
 }
 
 
-#define QEMU_PCI_VENDOR_INTEL     0x8086
-#define QEMU_PCI_VENDOR_LSI_LOGIC 0x1000
-#define QEMU_PCI_VENDOR_REDHAT    0x1af4
-#define QEMU_PCI_VENDOR_CIRRUS    0x1013
-#define QEMU_PCI_VENDOR_REALTEK   0x10ec
-#define QEMU_PCI_VENDOR_AMD       0x1022
-#define QEMU_PCI_VENDOR_ENSONIQ   0x1274
-#define QEMU_PCI_VENDOR_VMWARE    0x15ad
-#define QEMU_PCI_VENDOR_QEMU      0x1234
-
-#define QEMU_PCI_PRODUCT_DISK_VIRTIO 0x1001
-
-#define QEMU_PCI_PRODUCT_BALLOON_VIRTIO 0x1002
-
-#define QEMU_PCI_PRODUCT_NIC_NE2K     0x8029
-#define QEMU_PCI_PRODUCT_NIC_PCNET    0x2000
-#define QEMU_PCI_PRODUCT_NIC_RTL8139  0x8139
-#define QEMU_PCI_PRODUCT_NIC_E1000    0x100E
-#define QEMU_PCI_PRODUCT_NIC_VIRTIO   0x1000
-
-#define QEMU_PCI_PRODUCT_VGA_CIRRUS 0x00b8
-#define QEMU_PCI_PRODUCT_VGA_VMWARE 0x0405
-#define QEMU_PCI_PRODUCT_VGA_STDVGA 0x1111
-
-#define QEMU_PCI_PRODUCT_AUDIO_AC97    0x2415
-#define QEMU_PCI_PRODUCT_AUDIO_ES1370  0x5000
-
-#define QEMU_PCI_PRODUCT_CONTROLLER_PIIX 0x7010
-#define QEMU_PCI_PRODUCT_CONTROLLER_LSI  0x0012
-
-#define QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB 0x25ab
-
-static int
-qemuProcessAssignNextPCIAddress(virDomainDeviceInfo *info,
-                                int vendor,
-                                int product,
-                                qemuMonitorPCIAddress *addrs,
-                                int naddrs)
-{
-    bool found = false;
-    size_t i;
-
-    VIR_DEBUG("Look for %x:%x out of %d", vendor, product, naddrs);
-
-    for (i = 0; i < naddrs; i++) {
-        VIR_DEBUG("Maybe %x:%x", addrs[i].vendor, addrs[i].product);
-        if (addrs[i].vendor == vendor &&
-            addrs[i].product == product) {
-            VIR_DEBUG("Match %zu", i);
-            found = true;
-            break;
-        }
-    }
-    if (!found)
-        return -1;
-
-    /* Blank it out so this device isn't matched again */
-    addrs[i].vendor = 0;
-    addrs[i].product = 0;
-
-    if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
-        info->type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI;
-
-    if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
-        info->addr.pci.domain = addrs[i].addr.domain;
-        info->addr.pci.bus = addrs[i].addr.bus;
-        info->addr.pci.slot = addrs[i].addr.slot;
-        info->addr.pci.function = addrs[i].addr.function;
-    }
-
-    return 0;
-}
-
-static int
-qemuProcessGetPCIDiskVendorProduct(virDomainDiskDefPtr def,
-                                   unsigned *vendor,
-                                   unsigned *product)
-{
-    switch (def->bus) {
-    case VIR_DOMAIN_DISK_BUS_VIRTIO:
-        *vendor = QEMU_PCI_VENDOR_REDHAT;
-        *product = QEMU_PCI_PRODUCT_DISK_VIRTIO;
-        break;
-
-    default:
-        return -1;
-    }
-
-    return 0;
-}
-
-static int
-qemuProcessGetPCINetVendorProduct(virDomainNetDefPtr def,
-                                  unsigned *vendor,
-                                  unsigned *product)
-{
-    if (!def->model)
-        return -1;
-
-    if (STREQ(def->model, "ne2k_pci")) {
-        *vendor = QEMU_PCI_VENDOR_REALTEK;
-        *product = QEMU_PCI_PRODUCT_NIC_NE2K;
-    } else if (STREQ(def->model, "pcnet")) {
-        *vendor = QEMU_PCI_VENDOR_AMD;
-        *product = QEMU_PCI_PRODUCT_NIC_PCNET;
-    } else if (STREQ(def->model, "rtl8139")) {
-        *vendor = QEMU_PCI_VENDOR_REALTEK;
-        *product = QEMU_PCI_PRODUCT_NIC_RTL8139;
-    } else if (STREQ(def->model, "e1000")) {
-        *vendor = QEMU_PCI_VENDOR_INTEL;
-        *product = QEMU_PCI_PRODUCT_NIC_E1000;
-    } else if (STREQ(def->model, "virtio")) {
-        *vendor = QEMU_PCI_VENDOR_REDHAT;
-        *product = QEMU_PCI_PRODUCT_NIC_VIRTIO;
-    } else {
-        VIR_INFO("Unexpected NIC model %s, cannot get PCI address",
-                 def->model);
-        return -1;
-    }
-    return 0;
-}
-
-static int
-qemuProcessGetPCIControllerVendorProduct(virDomainControllerDefPtr def,
-                                         unsigned *vendor,
-                                         unsigned *product)
-{
-    switch (def->type) {
-    case VIR_DOMAIN_CONTROLLER_TYPE_SCSI:
-        *vendor = QEMU_PCI_VENDOR_LSI_LOGIC;
-        *product = QEMU_PCI_PRODUCT_CONTROLLER_LSI;
-        break;
-
-    case VIR_DOMAIN_CONTROLLER_TYPE_FDC:
-        /* XXX we could put in the ISA bridge address, but
-           that's not technically the FDC's address */
-        return -1;
-
-    case VIR_DOMAIN_CONTROLLER_TYPE_IDE:
-        *vendor = QEMU_PCI_VENDOR_INTEL;
-        *product = QEMU_PCI_PRODUCT_CONTROLLER_PIIX;
-        break;
-
-    default:
-        VIR_INFO("Unexpected controller type %s, cannot get PCI address",
-                 virDomainControllerTypeToString(def->type));
-        return -1;
-    }
-
-    return 0;
-}
-
-static int
-qemuProcessGetPCIVideoVendorProduct(virDomainVideoDefPtr def,
-                                    unsigned *vendor,
-                                    unsigned *product)
-{
-    switch (def->type) {
-    case VIR_DOMAIN_VIDEO_TYPE_CIRRUS:
-        *vendor = QEMU_PCI_VENDOR_CIRRUS;
-        *product = QEMU_PCI_PRODUCT_VGA_CIRRUS;
-        break;
-
-    case VIR_DOMAIN_VIDEO_TYPE_VGA:
-        *vendor = QEMU_PCI_VENDOR_QEMU;
-        *product = QEMU_PCI_PRODUCT_VGA_STDVGA;
-        break;
-
-    case VIR_DOMAIN_VIDEO_TYPE_VMVGA:
-        *vendor = QEMU_PCI_VENDOR_VMWARE;
-        *product = QEMU_PCI_PRODUCT_VGA_VMWARE;
-        break;
-
-    default:
-        return -1;
-    }
-    return 0;
-}
-
-static int
-qemuProcessGetPCISoundVendorProduct(virDomainSoundDefPtr def,
-                                    unsigned *vendor,
-                                    unsigned *product)
-{
-    switch (def->model) {
-    case VIR_DOMAIN_SOUND_MODEL_ES1370:
-        *vendor = QEMU_PCI_VENDOR_ENSONIQ;
-        *product = QEMU_PCI_PRODUCT_AUDIO_ES1370;
-        break;
-
-    case VIR_DOMAIN_SOUND_MODEL_AC97:
-        *vendor = QEMU_PCI_VENDOR_INTEL;
-        *product = QEMU_PCI_PRODUCT_AUDIO_AC97;
-        break;
-
-    default:
-        return -1;
-    }
-
-    return 0;
-}
-
-static int
-qemuProcessGetPCIWatchdogVendorProduct(virDomainWatchdogDefPtr def,
-                                       unsigned *vendor,
-                                       unsigned *product)
-{
-    switch (def->model) {
-    case VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB:
-        *vendor = QEMU_PCI_VENDOR_INTEL;
-        *product = QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB;
-        break;
-
-    default:
-        return -1;
-    }
-
-    return 0;
-}
-
-
-static int
-qemuProcessGetPCIMemballoonVendorProduct(virDomainMemballoonDefPtr def,
-                                         unsigned *vendor,
-                                         unsigned *product)
-{
-    switch (def->model) {
-    case VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO:
-        *vendor = QEMU_PCI_VENDOR_REDHAT;
-        *product = QEMU_PCI_PRODUCT_BALLOON_VIRTIO;
-        break;
-
-    default:
-        return -1;
-    }
-
-    return 0;
-}
-
-
-/*
- * This entire method assumes that PCI devices in 'info pci'
- * match ordering of devices specified on the command line
- * wrt to devices of matching vendor+product
- *
- * XXXX this might not be a valid assumption if we assign
- * some static addrs on CLI. Have to check that...
- */
-static int
-qemuProcessDetectPCIAddresses(virDomainObjPtr vm,
-                              qemuMonitorPCIAddress *addrs,
-                              int naddrs)
-{
-    unsigned int vendor = 0, product = 0;
-    size_t i;
-
-    /* XXX should all these vendor/product IDs be kept in the
-     * actual device data structure instead ?
-     */
-
-    for (i = 0; i < vm->def->ndisks; i++) {
-        if (qemuProcessGetPCIDiskVendorProduct(vm->def->disks[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->disks[i]->info),
-                                            vendor, product,
-                                            addrs, naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for VirtIO disk %s"),
-                           vm->def->disks[i]->dst);
-            return -1;
-        }
-    }
-
-    for (i = 0; i < vm->def->nnets; i++) {
-        if (qemuProcessGetPCINetVendorProduct(vm->def->nets[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->nets[i]->info),
-                                            vendor, product,
-                                            addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for %s NIC"),
-                           vm->def->nets[i]->model);
-            return -1;
-        }
-    }
-
-    for (i = 0; i < vm->def->ncontrollers; i++) {
-        if (qemuProcessGetPCIControllerVendorProduct(vm->def->controllers[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->controllers[i]->info),
-                                            vendor, product,
-                                            addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for controller %s"),
-                           virDomainControllerTypeToString(vm->def->controllers[i]->type));
-            return -1;
-        }
-    }
-
-    for (i = 0; i < vm->def->nvideos; i++) {
-        if (qemuProcessGetPCIVideoVendorProduct(vm->def->videos[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->videos[i]->info),
-                                            vendor, product,
-                                            addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for video adapter %s"),
-                           virDomainVideoTypeToString(vm->def->videos[i]->type));
-            return -1;
-        }
-    }
-
-    for (i = 0; i < vm->def->nsounds; i++) {
-        if (qemuProcessGetPCISoundVendorProduct(vm->def->sounds[i], &vendor, &product) < 0)
-            continue;
-
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->sounds[i]->info),
-                                    vendor, product,
-                                     addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for sound adapter %s"),
-                           virDomainSoundModelTypeToString(vm->def->sounds[i]->model));
-            return -1;
-        }
-    }
-
-
-    if (vm->def->watchdog &&
-        qemuProcessGetPCIWatchdogVendorProduct(vm->def->watchdog, &vendor, &product) == 0) {
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->watchdog->info),
-                                            vendor, product,
-                                            addrs,  naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for watchdog %s"),
-                           virDomainWatchdogModelTypeToString(vm->def->watchdog->model));
-            return -1;
-        }
-    }
-
-    if (vm->def->memballoon &&
-        qemuProcessGetPCIMemballoonVendorProduct(vm->def->memballoon, &vendor, &product) == 0) {
-        if (qemuProcessAssignNextPCIAddress(&(vm->def->memballoon->info),
-                                            vendor, product,
-                                            addrs, naddrs) < 0) {
-            virReportError(VIR_ERR_INTERNAL_ERROR,
-                           _("cannot find PCI address for balloon %s"),
-                           virDomainMemballoonModelTypeToString(vm->def->memballoon->model));
-            return -1;
-        }
-    }
-
-    /* XXX console (virtio) */
-
-
-    /* ... and now things we don't have in our xml */
-
-    /* XXX USB controller ? */
-
-    /* XXX what about other PCI devices (ie bridges) */
-
-    return 0;
-}
-
-static int
-qemuProcessInitPCIAddresses(virQEMUDriverPtr driver,
-                            virDomainObjPtr vm,
-                            int asyncJob)
-{
-    qemuDomainObjPrivatePtr priv = vm->privateData;
-    int naddrs;
-    int ret = -1;
-    qemuMonitorPCIAddress *addrs = NULL;
-
-    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
-        return -1;
-    naddrs = qemuMonitorGetAllPCIAddresses(priv->mon,
-                                           &addrs);
-    if (qemuDomainObjExitMonitor(driver, vm) < 0)
-        goto cleanup;
-
-    if (naddrs > 0)
-        ret = qemuProcessDetectPCIAddresses(vm, addrs, naddrs);
-
- cleanup:
-    VIR_FREE(addrs);
-
-    return ret;
-}
-
-
 static int
 qemuProcessPrepareChardevDevice(virDomainDefPtr def ATTRIBUTE_UNUSED,
                                 virDomainChrDefPtr dev,
@@ -5616,14 +5222,6 @@ qemuProcessLaunch(virConnectPtr conn,
     if (qemuProcessInitPasswords(conn, driver, vm, asyncJob) < 0)
         goto cleanup;
 
-    /* If we have -device, then addresses are assigned explicitly.
-     * If not, then we have to detect dynamic ones here */
-    if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
-        VIR_DEBUG("Determining domain device PCI addresses");
-        if (qemuProcessInitPCIAddresses(driver, vm, asyncJob) < 0)
-            goto cleanup;
-    }
-
     /* set default link states */
     /* qemu doesn't support setting this on the command line, so
      * enter the monitor */
@@ -6420,14 +6018,6 @@ int qemuProcessAttach(virConnectPtr conn ATTRIBUTE_UNUSED,
     if (qemuProcessDetectIOThreadPIDs(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
         goto error;
 
-    /* If we have -device, then addresses are assigned explicitly.
-     * If not, then we have to detect dynamic ones here */
-    if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
-        VIR_DEBUG("Determining domain device PCI addresses");
-        if (qemuProcessInitPCIAddresses(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
-            goto error;
-    }
-
     VIR_DEBUG("Getting initial memory amount");
     qemuDomainObjEnterMonitor(driver, vm);
     if (qemuMonitorGetBalloonInfo(priv->mon, &vm->def->mem.cur_balloon) < 0)
-- 
2.7.3

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]