libvirt/qemu.conf: spaces correction --- src/qemu/qemu.conf | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf index 4fa5e8a..5cf4599 100644 --- a/src/qemu/qemu.conf +++ b/src/qemu/qemu.conf @@ -38,7 +38,7 @@ # # ca-cert.pem - the CA master certificate # server-cert.pem - the server certificate signed with ca-cert.pem -# server-key.pem - the server private key +# server-key.pem - the server private key # # This option allows the certificate directory to be changed # @@ -123,7 +123,7 @@ # # ca-cert.pem - the CA master certificate # server-cert.pem - the server certificate signed with ca-cert.pem -# server-key.pem - the server private key +# server-key.pem - the server private key # # This option allows the certificate directory to be changed. # @@ -179,7 +179,7 @@ #remote_display_port_max = 65535 # VNC WebSocket port policies, same rules apply as with remote display -# ports. VNC WebSockets use similar display <-> port mappings, with +# ports. VNC WebSockets use similar display <-> port mappings, with # the exception being that ports start from 5700 instead of 5900. # #remote_websocket_port_min = 5700 @@ -196,7 +196,7 @@ # security_driver = [ "selinux", "apparmor" ] # # Notes: The DAC security driver is always enabled; as a result, the -# value of security_driver cannot contain "dac". The value "none" is +# value of security_driver cannot contain "dac". The value "none" is # a special value; security_driver can be set to that value in # isolation, but it cannot appear in a list of drivers. # @@ -272,7 +272,7 @@ # "/dev/null", "/dev/full", "/dev/zero", # "/dev/random", "/dev/urandom", # "/dev/ptmx", "/dev/kvm", "/dev/kqemu", -# "/dev/rtc","/dev/hpet", "/dev/vfio/vfio" +# "/dev/rtc", "/dev/hpet", "/dev/vfio/vfio" #] # # RDMA migration requires the following extra files to be added to the list: @@ -285,11 +285,11 @@ # The default format for Qemu/KVM guest save images is raw; that is, the -# memory from the domain is dumped out directly to a file. If you have +# memory from the domain is dumped out directly to a file. If you have # guests with a large amount of memory, however, this can take up quite -# a bit of space. If you would like to compress the images while they +# a bit of space. If you would like to compress the images while they # are being saved to disk, you can also set "lzop", "gzip", "bzip2", or "xz" -# for save_image_format. Note that this means you slow down the process of +# for save_image_format. Note that this means you slow down the process of # saving a domain in order to save disk space; the list above is in descending # order by performance and ascending order by compression ratio. # @@ -319,7 +319,7 @@ # When a domain is configured to be auto-dumped, enabling this flag # has the same effect as using the VIR_DUMP_BYPASS_CACHE flag with the -# virDomainCoreDump API. That is, the system will avoid using the +# virDomainCoreDump API. That is, the system will avoid using the # file system cache while writing the dump file, but may cause # slower operation. # @@ -327,17 +327,17 @@ # When a domain is configured to be auto-started, enabling this flag # has the same effect as using the VIR_DOMAIN_START_BYPASS_CACHE flag -# with the virDomainCreateWithFlags API. That is, the system will +# with the virDomainCreateWithFlags API. That is, the system will # avoid using the file system cache when restoring any managed state # file, but may cause slower operation. # #auto_start_bypass_cache = 0 # If provided by the host and a hugetlbfs mount point is configured, -# a guest may request huge page backing. When this mount point is +# a guest may request huge page backing. When this mount point is # unspecified here, determination of a host mount point in /proc/mounts -# will be attempted. Specifying an explicit mount overrides detection -# of the same in /proc/mounts. Setting the mount point to "" will +# will be attempted. Specifying an explicit mount overrides detection +# of the same in /proc/mounts. Setting the mount point to "" will # disable guest hugepage backing. If desired, multiple mount points can # be specified at once, separated by comma and enclosed in square # brackets, for example: @@ -353,9 +353,9 @@ #hugetlbfs_mount = "/dev/hugepages" -# Path to the setuid helper for creating tap devices. This executable +# Path to the setuid helper for creating tap devices. This executable # is used to create <source type='bridge'> interfaces when libvirtd is -# running unprivileged. libvirt invokes the helper directly, instead +# running unprivileged. libvirt invokes the helper directly, instead # of using "-netdev bridge", for security reasons. #bridge_helper = "/usr/libexec/qemu-bridge-helper" @@ -411,7 +411,7 @@ # # WARNING: Enabling probing is a security hole in almost all # deployments. It is strongly recommended that users update their -# guest XML <disk> elements to include <driver type='XXXX'/> +# guest XML <disk> elements to include <driver type='XXXX'/> # elements instead of enabling this option. # #allow_disk_format_probing = 1 @@ -437,18 +437,18 @@ ################################################################### # Keepalive protocol: # This allows qemu driver to detect broken connections to remote -# libvirtd during peer-to-peer migration. A keepalive message is +# libvirtd during peer-to-peer migration. A keepalive message is # sent to the daemon after keepalive_interval seconds of inactivity # to check if the daemon is still responding; keepalive_count is a # maximum number of keepalive messages that are allowed to be sent # to the daemon without getting any response before the connection -# is considered broken. In other words, the connection is +# is considered broken. In other words, the connection is # automatically closed approximately after # keepalive_interval * (keepalive_count + 1) seconds since the last # message received from the daemon. If keepalive_interval is set to # -1, qemu driver will not send keepalive requests during # peer-to-peer migration; however, the remote libvirtd can still -# send them and source libvirtd will send responses. When +# send them and source libvirtd will send responses. When # keepalive_count is set to 0, connections will be automatically # closed after keepalive_interval seconds of inactivity without # sending any keepalive messages. @@ -471,9 +471,9 @@ # The default hostname or IP address which will be used by a migration -# source for transferring migration data to this host. The migration +# source for transferring migration data to this host. The migration # source has to be able to resolve this hostname and connect to it so -# setting "localhost" will not work. By default, the host's configured +# setting "localhost" will not work. By default, the host's configured # hostname is used. #migration_host = "host.example.com" -- 2.4.11 -- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list