SRIOV VFs used in macvtap passthrough mode can take advantage of the
SRIOV card's transparent vlan tagging. All the code was there to set
the vlan tag, and it has been used for SRIOV VFs used for hostdev
interfaces for several years, but for some reason, the vlan tag for
macvtap passthrough devices was stubbed out with a -1.
This patch moves a bit of common validation down to a lower level
(virNetDevReplaceNetConfig()) so it is shared by hostdev and macvtap
modes, and updates the macvtap caller to actually send the vlan config
instead of -1.
---
While adding the info to the docs, I got a bit carried away fixing up
the vlan-specific paragraphs. It someone really wants me to I can move
it into a separate patch, but it seemed like more trouble than it was
worth at the time...
docs/formatdomain.html.in | 61 +++++++++++++++++++++++++++------------------
src/lxc/lxc_process.c | 3 ++-
src/network/bridge_driver.c | 17 ++++++++-----
src/qemu/qemu_interface.c | 1 +
src/util/virhostdev.c | 23 ++---------------
src/util/virnetdev.c | 29 +++++++++++++++++----
src/util/virnetdev.h | 6 +++--
src/util/virnetdevmacvlan.c | 4 ++-
src/util/virnetdevmacvlan.h | 2 ++
9 files changed, 86 insertions(+), 60 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 97794b7..68f0295 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -4032,7 +4032,7 @@
<p>
On Linux systems, the bridge device is normally a standard Linux
host bridge. On hosts that support Open vSwitch, it is also
- possible to connect to an open vSwitch bridge device by adding
+ possible to connect to an Open vSwitch bridge device by adding
a <code><virtualport type='openvswitch'/></code> to the
interface definition. (<span class="since">Since
0.9.11</span>). The Open vSwitch type virtualport accepts two
@@ -4816,34 +4816,47 @@ qemu-kvm -net nic,model=? /dev/null
<p>
If (and only if) the network connection used by the guest
- supports vlan tagging transparent to the guest, an
+ supports VLAN tagging transparent to the guest, an
optional <code><vlan></code> element can specify one or
- more vlan tags to apply to the guest's network
- traffic <span class="since">Since 0.10.0</span>. (openvswitch
- and type='hostdev' SR-IOV interfaces do support transparent vlan
- tagging of guest traffic; everything else, including standard
+ more VLAN tags to apply to the guest's network
+ traffic <span class="since">Since 0.10.0</span>. Network
+ connections that support guest-transparent VLAN tagging include
+ 1) type='bridge' interfaces connected to an Open vSwitch bridge
+ <span class="since">Since 0.10.0</span>, 2) SRIOV Virtual
+ Functions (VF) used via type='hostdev' (direct device
+ assignment) <span class="since">Since 0.10.0</span>, and 3)
+ SRIOV VFs used via type='direct' with mode='passthrough'
+ (macvtap "passthru" mode) <span class="since">Since
+ 1.3.4</span>; all other connection types, including standard
linux bridges and libvirt's own virtual networks, <b>do not</b>
support it. 802.1Qbh (vn-link) and 802.1Qbg (VEPA) switches
provide their own way (outside of libvirt) to tag guest traffic
- onto specific vlans.) To allow for specification of multiple
- tags (in the case of vlan trunking), a
- subelement, <code><tag></code>, specifies which vlan tag
- to use (for example: <code><tag id='42'/></code>. If an
- interface has more than one <code><vlan></code> element
- defined, it is assumed that the user wants to do VLAN trunking
- using all the specified tags. In the case that vlan trunking
- with a single tag is desired, the optional
+ onto specific vlans.) Each tag is given in a
+ separate <code><tag></code> subelement
+ of <code><vlan></code> (for example: <code><tag
+ id='42'/></code>). For VLAN trunking of multiple tags (which
+ is supported only on Open vSwitch connections),
+ multiple <code><tag></code> subelements can be specified,
+ which implies that the user wants to do VLAN trunking on the
+ interface for all the specified tags. In the case that VLAN
+ trunking of a single tag is desired, the optional
attribute <code>trunk='yes'</code> can be added to the toplevel
- vlan element.
- </p>
-
- <p>
- For network connections using openvswitch it is possible to
- configure the 'native-tagged' and 'native-untagged' vlan modes
- <span class="since">Since 1.1.0.</span> This uses the optional
- <code>nativeMode</code> attribute on the <code><tag></code>
- element: <code>nativeMode</code> may be set to 'tagged' or
- 'untagged'. The id attribute of the element sets the native vlan.
+ <code><vlan></code> element to differentiate trunking of a
+ single tag from normal tagging.
+ </p>
+
+ <p>
+ For network connections using Open vSwitch it is also possible
+ to configure 'native-tagged' and 'native-untagged' VLAN modes
+ <span class="since">Since 1.1.0.</span> This is done with the
+ optional <code>nativeMode</code> attribute on
+ the <code><tag></code> subelement: <code>nativeMode</code>
+ may be set to 'tagged' or 'untagged'. The <code>id</code>
+ attribute of the <code><tag></code> subelement
+ containing <code>nativeMode</code> sets which VLAN is considered
+ to be the "native" VLAN for this interface, and
+ the <code>nativeMode</code> attribute determines whether or not
+ traffic for that VLAN will be tagged.
</p>
<h5><a name="elementLink">Modifying virtual link state</a></h5>
diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c
index 0044ee5..8981d9a 100644
--- a/src/lxc/lxc_process.c
+++ b/src/lxc/lxc_process.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010-2015 Red Hat, Inc.
+ * Copyright (C) 2010-2016 Red Hat, Inc.
* Copyright IBM Corp. 2008
*
* lxc_process.c: LXC process lifecycle management
@@ -343,6 +343,7 @@ char *virLXCProcessSetupInterfaceDirect(virConnectPtr conn,
net->ifname, &net->mac,
linkdev,
virDomainNetGetActualDirectMode(net),
+ virDomainNetGetActualVlan(net),
def->uuid,
prof,
&res_ifname,
diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
index a34da2a..7a2cadb 100644
--- a/src/network/bridge_driver.c
+++ b/src/network/bridge_driver.c
@@ -3058,11 +3058,12 @@ networkValidate(virNetworkDriverStatePtr driver,
* a pool, and those using an Open vSwitch bridge.
*/
- vlanAllowed = ((def->forward.type == VIR_NETWORK_FORWARD_BRIDGE &&
+ vlanAllowed = (def->forward.type == VIR_NETWORK_FORWARD_HOSTDEV ||
+ def->forward.type == VIR_NETWORK_FORWARD_PASSTHROUGH ||
+ (def->forward.type == VIR_NETWORK_FORWARD_BRIDGE &&
def->virtPortProfile &&
def->virtPortProfile->virtPortType
- == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) ||
- def->forward.type == VIR_NETWORK_FORWARD_HOSTDEV);
+ == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH));
vlanUsed = def->vlan.nTags > 0;
for (i = 0; i < def->nPortGroups; i++) {
@@ -4277,11 +4278,15 @@ networkAllocateActualDevice(virDomainDefPtr dom,
*/
if (virDomainNetGetActualVlan(iface)) {
- /* vlan configuration via libvirt is only supported for
- * PCI Passthrough SR-IOV devices and openvswitch bridges.
- * otherwise log an error and fail
+ /* vlan configuration via libvirt is only supported for PCI
+ * Passthrough SR-IOV devices (hostdev or macvtap passthru
+ * mode) and openvswitch bridges. Otherwise log an error and
+ * fail
*/
if (!(actualType == VIR_DOMAIN_NET_TYPE_HOSTDEV ||
+ (actualType == VIR_DOMAIN_NET_TYPE_DIRECT &&
+ virDomainNetGetActualDirectMode(iface)
+ == VIR_NETDEV_MACVLAN_MODE_PASSTHRU) ||
(actualType == VIR_DOMAIN_NET_TYPE_BRIDGE &&
virtport && virtport->virtPortType
== VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH))) {
diff --git a/src/qemu/qemu_interface.c b/src/qemu/qemu_interface.c
index ef789fa..b48ae50 100644
--- a/src/qemu/qemu_interface.c
+++ b/src/qemu/qemu_interface.c
@@ -266,6 +266,7 @@ qemuInterfaceDirectConnect(virDomainDefPtr def,
&net->mac,
virDomainNetGetActualDirectDev(net),
virDomainNetGetActualDirectMode(net),
+ virDomainNetGetActualVlan(net),
def->uuid,
virDomainNetGetActualVirtPortProfile(net),
&res_ifname,
diff --git a/src/util/virhostdev.c b/src/util/virhostdev.c
index 933c942..980e590 100644
--- a/src/util/virhostdev.c
+++ b/src/util/virhostdev.c
@@ -1,6 +1,6 @@
/* virhostdev.c: hostdev management
*
- * Copyright (C) 2006-2007, 2009-2015 Red Hat, Inc.
+ * Copyright (C) 2006-2007, 2009-2016 Red Hat, Inc.
* Copyright (C) 2006 Daniel P. Berrange
* Copyright (C) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany.
*
@@ -387,7 +387,6 @@ virHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev,
virNetDevVPortProfilePtr virtPort;
int ret = -1;
int vf = -1;
- int vlanid = -1;
bool port_profile_associate = true;
if (virHostdevIsVirtualFunction(hostdev) != 1) {
@@ -416,27 +415,9 @@ virHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev,
port_profile_associate);
} else {
/* Set only mac and vlan */
- if (vlan) {
- if (vlan->nTags != 1 || vlan->trunk) {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
- _("vlan trunking is not supported "
- "by SR-IOV network devices"));
- goto cleanup;
- }
- if (vf == -1) {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("vlan can only be set for SR-IOV VFs, but "
- "%s is not a VF"), linkdev);
- goto cleanup;
- }
- vlanid = vlan->tag[0];
- } else if (vf >= 0) {
- vlanid = 0; /* assure any current vlan tag is reset */
- }
-
ret = virNetDevReplaceNetConfig(linkdev, vf,
&hostdev->parent.data.net->mac,
- vlanid, stateDir);
+ vlan, stateDir);
}
cleanup:
VIR_FREE(linkdev);
diff --git a/src/util/virnetdev.c b/src/util/virnetdev.c
index bb17b84..7db4497 100644
--- a/src/util/virnetdev.c
+++ b/src/util/virnetdev.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007-2015 Red Hat, Inc.
+ * Copyright (C) 2007-2016 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
@@ -2547,7 +2547,8 @@ virNetDevRestoreVfConfig(const char *pflinkdev,
*/
int
virNetDevReplaceNetConfig(const char *linkdev, int vf,
- const virMacAddr *macaddress, int vlanid,
+ const virMacAddr *macaddress,
+ virNetDevVlanPtr vlan,
const char *stateDir)
{
int ret = -1;
@@ -2566,11 +2567,29 @@ virNetDevReplaceNetConfig(const char *linkdev, int vf,
linkdev = pfdevname;
}
- if (vf == -1)
+ if (vf == -1) {
+ if (vlan) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("vlan can only be set for SR-IOV VFs, but "
+ "%s is not a VF"), linkdev);
+ goto cleanup;
+ }
ret = virNetDevReplaceMacAddress(linkdev, macaddress, stateDir);
- else
+ } else {
+ int vlanid = 0; /* assure any current vlan tag is reset */
+
+ if (vlan) {
+ if (vlan->nTags != 1 || vlan->trunk) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("vlan trunking is not supported "
+ "by SR-IOV network devices"));
+ goto cleanup;
+ }
+ vlanid = vlan->tag[0];
+ }
ret = virNetDevReplaceVfConfig(linkdev, vf, macaddress, vlanid,
stateDir);
+ }
cleanup:
VIR_FREE(pfdevname);
@@ -2636,7 +2655,7 @@ int
virNetDevReplaceNetConfig(const char *linkdev ATTRIBUTE_UNUSED,
int vf ATTRIBUTE_UNUSED,
const virMacAddr *macaddress ATTRIBUTE_UNUSED,
- int vlanid ATTRIBUTE_UNUSED,
+ virNetDevVlanPtr vlan ATTRIBUTE_UNUSED,
const char *stateDir ATTRIBUTE_UNUSED)
{
virReportSystemError(ENOSYS, "%s",
diff --git a/src/util/virnetdev.h b/src/util/virnetdev.h
index dcc81a6..cbe7938 100644
--- a/src/util/virnetdev.h
+++ b/src/util/virnetdev.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007-2015 Red Hat, Inc.
+ * Copyright (C) 2007-2016 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
@@ -30,6 +30,7 @@
# include "virnetlink.h"
# include "virmacaddr.h"
# include "virpci.h"
+# include "virnetdevvlan.h"
# include "device_conf.h"
# ifdef HAVE_STRUCT_IFREQ
@@ -175,7 +176,8 @@ int virNetDevLinkDump(const char *ifname, int ifindex,
ATTRIBUTE_RETURN_CHECK;
int virNetDevReplaceNetConfig(const char *linkdev, int vf,
- const virMacAddr *macaddress, int vlanid,
+ const virMacAddr *macaddress,
+ virNetDevVlanPtr vlan,
const char *stateDir)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(3) ATTRIBUTE_NONNULL(5);
diff --git a/src/util/virnetdevmacvlan.c b/src/util/virnetdevmacvlan.c
index d755b93..c05c67f 100644
--- a/src/util/virnetdevmacvlan.c
+++ b/src/util/virnetdevmacvlan.c
@@ -975,6 +975,7 @@ virNetDevMacVLanCreateWithVPortProfile(const char *ifnameRequested,
const virMacAddr *macaddress,
const char *linkdev,
virNetDevMacVLanMode mode,
+ virNetDevVlanPtr vlan,
const unsigned char *vmuuid,
virNetDevVPortProfilePtr virtPortProfile,
char **ifnameResult,
@@ -1021,7 +1022,7 @@ virNetDevMacVLanCreateWithVPortProfile(const char *ifnameRequested,
if (virNetDevReplaceMacAddress(linkdev, macaddress, stateDir) < 0)
return -1;
} else {
- if (virNetDevReplaceNetConfig(linkdev, -1, macaddress, -1, stateDir) < 0)
+ if (virNetDevReplaceNetConfig(linkdev, -1, macaddress, vlan, stateDir) < 0)
return -1;
}
}
@@ -1281,6 +1282,7 @@ int virNetDevMacVLanCreateWithVPortProfile(const char *ifname ATTRIBUTE_UNUSED,
const virMacAddr *macaddress ATTRIBUTE_UNUSED,
const char *linkdev ATTRIBUTE_UNUSED,
virNetDevMacVLanMode mode ATTRIBUTE_UNUSED,
+ virNetDevVlanPtr vlan ATTRIBUTE_UNUSED,
const unsigned char *vmuuid ATTRIBUTE_UNUSED,
virNetDevVPortProfilePtr virtPortProfile ATTRIBUTE_UNUSED,
char **res_ifname ATTRIBUTE_UNUSED,
diff --git a/src/util/virnetdevmacvlan.h b/src/util/virnetdevmacvlan.h
index 560593e..179a8a1 100644
--- a/src/util/virnetdevmacvlan.h
+++ b/src/util/virnetdevmacvlan.h
@@ -28,6 +28,7 @@
# include "virsocketaddr.h"
# include "virnetdevbandwidth.h"
# include "virnetdevvportprofile.h"
+# include "virnetdevvlan.h"
/* the mode type for macvtap devices */
typedef enum {
@@ -69,6 +70,7 @@ int virNetDevMacVLanCreateWithVPortProfile(const char *ifname,
const virMacAddr *macaddress,
const char *linkdev,
virNetDevMacVLanMode mode,
+ virNetDevVlanPtr vlan,
const unsigned char *vmuuid,
virNetDevVPortProfilePtr virtPortProfile,
char **res_ifname,
--
2.5.5
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list