Both RHEL and Fedora build with libvirtd enabled at
all times.
Signed-off-by: Daniel P. Berrange <berrange@xxxxxxxxxx>
---
libvirt.spec.in | 419 ++++++++++++++++++++++++++------------------------------
1 file changed, 192 insertions(+), 227 deletions(-)
diff --git a/libvirt.spec.in b/libvirt.spec.in
index 870780e..4d70ded 100644
--- a/libvirt.spec.in
+++ b/libvirt.spec.in
@@ -18,8 +18,6 @@
# Now set the defaults for all the important features, independent
# of any particular OS
-# First the daemon itself
-%define with_libvirtd 0%{!?_without_libvirtd:1}
%define with_avahi 0%{!?_without_avahi:1}
# Then the hypervisor drivers that run in libvirtd
@@ -220,25 +218,6 @@
%define with_wireshark 0%{!?_without_wireshark:1}
%endif
-# Disable some drivers when building without libvirt daemon.
-# The logic is the same as in configure.ac
-%if ! %{with_libvirtd}
- %define with_interface 0
- %define with_network 0
- %define with_qemu 0
- %define with_lxc 0
- %define with_uml 0
- %define with_hal 0
- %define with_udev 0
- %define with_storage_fs 0
- %define with_storage_lvm 0
- %define with_storage_iscsi 0
- %define with_storage_mpath 0
- %define with_storage_rbd 0
- %define with_storage_sheepdog 0
- %define with_storage_gluster 0
- %define with_storage_disk 0
-%endif
%if %{with_qemu} || %{with_lxc} || %{with_uml}
%define with_nwfilter 0%{!?_without_nwfilter:1}
@@ -317,44 +296,42 @@ URL: http://libvirt.org/
%endif
Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
-%if %{with_libvirtd}
Requires: libvirt-daemon = %{version}-%{release}
- %if %{with_network}
+%if %{with_network}
Requires: libvirt-daemon-config-network = %{version}-%{release}
- %endif
- %if %{with_nwfilter}
+%endif
+%if %{with_nwfilter}
Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
- %endif
- %if %{with_libxl}
+%endif
+%if %{with_libxl}
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
- %endif
- %if %{with_lxc}
+%endif
+%if %{with_lxc}
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
- %endif
- %if %{with_qemu}
+%endif
+%if %{with_qemu}
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
- %endif
- %if %{with_uml}
+%endif
+%if %{with_uml}
Requires: libvirt-daemon-driver-uml = %{version}-%{release}
- %endif
- %if %{with_xen}
+%endif
+%if %{with_xen}
Requires: libvirt-daemon-driver-xen = %{version}-%{release}
- %endif
- %if %{with_vbox}
+%endif
+%if %{with_vbox}
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
- %endif
- %if %{with_nwfilter}
+%endif
+%if %{with_nwfilter}
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
- %endif
+%endif
- %if %{with_interface}
+%if %{with_interface}
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
- %endif
+%endif
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
-%endif
Requires: libvirt-client = %{version}-%{release}
# All build-time requirements. Run-time requirements are
@@ -390,10 +367,8 @@ BuildRequires: libgcrypt-devel
%endif
BuildRequires: gnutls-devel
BuildRequires: libattr-devel
-%if %{with_libvirtd}
# For pool-build probing for existing pools
BuildRequires: libblkid-devel >= 2.17
-%endif
# for augparse, optionally used in testing
BuildRequires: augeas
%if %{with_hal}
@@ -569,7 +544,6 @@ Group: Development/Libraries
Includes the API reference for the libvirt C library, and a complete
copy of the libvirt.org website documentation.
-%if %{with_libvirtd}
%package daemon
Summary: Server side daemon and supporting files for libvirt library
Group: Development/Libraries
@@ -584,33 +558,33 @@ Requires: %{name}-client = %{version}-%{release}
Requires: module-init-tools
# for /sbin/ip & /sbin/tc
Requires: iproute
- %if %{with_avahi}
+%if %{with_avahi}
Requires: avahi-libs
- %endif
- %if %{with_polkit}
- %if 0%{?fedora} || 0%{?rhel} >= 7
+%endif
+%if %{with_polkit}
+ %if 0%{?fedora} || 0%{?rhel} >= 7
Requires: polkit >= 0.112
- %else
+ %else
Requires: polkit >= 0.93
- %endif
%endif
- %if %{with_cgconfig}
+%endif
+%if %{with_cgconfig}
Requires: libcgroup
- %endif
- %ifarch %{ix86} x86_64 ia64
+%endif
+%ifarch %{ix86} x86_64 ia64
# For virConnectGetSysinfo
Requires: dmidecode
- %endif
+%endif
# For service management
- %if %{with_systemd}
+%if %{with_systemd}
Requires(post): systemd-units
Requires(post): systemd-sysv
Requires(preun): systemd-units
Requires(postun): systemd-units
- %endif
- %if %{with_numad}
+%endif
+%if %{with_numad}
Requires: numad
- %endif
+%endif
# libvirtd depends on 'messagebus' service
Requires: dbus
# For uid creation during pre
@@ -621,7 +595,7 @@ Server side daemon required to manage the virtualization capabilities
of recent versions of Linux. Requires a hypervisor specific sub-RPM
for specific drivers.
- %if %{with_network}
+%if %{with_network}
%package daemon-config-network
Summary: Default configuration files for the libvirtd daemon
Group: Development/Libraries
@@ -631,9 +605,9 @@ Requires: libvirt-daemon-driver-network = %{version}-%{release}
%description daemon-config-network
Default configuration files for setting up NAT based networking
- %endif
+%endif
- %if %{with_nwfilter}
+%if %{with_nwfilter}
%package daemon-config-nwfilter
Summary: Network filter configuration files for the libvirtd daemon
Group: Development/Libraries
@@ -643,9 +617,9 @@ Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
%description daemon-config-nwfilter
Network filter configuration files for cleaning guest traffic
- %endif
+%endif
- %if %{with_network}
+%if %{with_network}
%package daemon-driver-network
Summary: Network driver plugin for the libvirtd daemon
Group: Development/Libraries
@@ -653,73 +627,73 @@ Requires: libvirt-daemon = %{version}-%{release}
Requires: dnsmasq >= 2.41
Requires: radvd
Requires: iptables
- %if 0%{?rhel} && 0%{?rhel} < 7
+ %if 0%{?rhel} && 0%{?rhel} < 7
Requires: iptables-ipv6
- %endif
+ %endif
%description daemon-driver-network
The network driver plugin for the libvirtd daemon, providing
an implementation of the virtual network APIs using the Linux
bridge capabilities.
- %endif
+%endif
- %if %{with_nwfilter}
+%if %{with_nwfilter}
%package daemon-driver-nwfilter
Summary: Nwfilter driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
Requires: iptables
- %if 0%{?rhel} && 0%{?rhel} < 7
+ %if 0%{?rhel} && 0%{?rhel} < 7
Requires: iptables-ipv6
- %endif
+ %endif
Requires: ebtables
%description daemon-driver-nwfilter
The nwfilter driver plugin for the libvirtd daemon, providing
an implementation of the firewall APIs using the ebtables,
iptables and ip6tables capabilities
- %endif
+%endif
- %if %{with_nodedev}
+%if %{with_nodedev}
%package daemon-driver-nodedev
Summary: Nodedev driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
# needed for device enumeration
- %if %{with_hal}
+ %if %{with_hal}
Requires: hal
- %endif
- %if %{with_udev}
- %if 0%{?fedora} || 0%{?rhel} >= 7
+ %endif
+ %if %{with_udev}
+ %if 0%{?fedora} || 0%{?rhel} >= 7
Requires: systemd >= 185
- %else
+ %else
Requires: udev >= 145
- %endif
%endif
+ %endif
%description daemon-driver-nodedev
The nodedev driver plugin for the libvirtd daemon, providing
an implementation of the node device APIs using the udev
capabilities.
- %endif
+%endif
- %if %{with_interface}
+%if %{with_interface}
%package daemon-driver-interface
Summary: Interface driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
- %if %{with_netcf} && (0%{?fedora} || 0%{?rhel} >= 7)
+ %if %{with_netcf} && (0%{?fedora} || 0%{?rhel} >= 7)
Requires: netcf-libs >= 0.2.2
- %endif
+ %endif
%description daemon-driver-interface
The interface driver plugin for the libvirtd daemon, providing
an implementation of the network interface APIs using the
netcf library
- %endif
+%endif
%package daemon-driver-secret
@@ -732,59 +706,59 @@ The secret driver plugin for the libvirtd daemon, providing
an implementation of the secret key APIs.
- %if %{with_storage}
+%if %{with_storage}
%package daemon-driver-storage
Summary: Storage driver plugin for the libvirtd daemon
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
- %if %{with_storage_fs}
+ %if %{with_storage_fs}
Requires: nfs-utils
# For mkfs
Requires: util-linux
# For glusterfs
- %if 0%{?fedora}
+ %if 0%{?fedora}
Requires: glusterfs-client >= 2.0.1
- %endif
%endif
- %if %{with_storage_lvm}
+ %endif
+ %if %{with_storage_lvm}
# For LVM drivers
Requires: lvm2
- %endif
- %if %{with_storage_iscsi}
+ %endif
+ %if %{with_storage_iscsi}
# For ISCSI driver
Requires: iscsi-initiator-utils
- %endif
- %if %{with_storage_disk}
+ %endif
+ %if %{with_storage_disk}
# For disk driver
Requires: parted
Requires: device-mapper
- %endif
- %if %{with_storage_mpath}
+ %endif
+ %if %{with_storage_mpath}
# For multipath support
Requires: device-mapper
- %endif
- %if %{with_storage_sheepdog}
+ %endif
+ %if %{with_storage_sheepdog}
# For Sheepdog support
Requires: sheepdog
- %endif
- %if %{with_qemu}
+ %endif
+ %if %{with_qemu}
# From QEMU RPMs
Requires: /usr/bin/qemu-img
- %else
- %if %{with_xen}
+ %else
+ %if %{with_xen}
# From Xen RPMs
Requires: /usr/sbin/qcow-create
- %endif
%endif
+ %endif
%description daemon-driver-storage
The storage driver plugin for the libvirtd daemon, providing
an implementation of the storage APIs using LVM, iSCSI,
parted and more.
- %endif
+%endif
- %if %{with_qemu}
+%if %{with_qemu}
%package daemon-driver-qemu
Summary: Qemu driver plugin for the libvirtd daemon
Group: Development/Libraries
@@ -802,10 +776,10 @@ Requires: xz
The qemu driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
QEMU
- %endif
+%endif
- %if %{with_lxc}
+%if %{with_lxc}
%package daemon-driver-lxc
Summary: LXC driver plugin for the libvirtd daemon
Group: Development/Libraries
@@ -817,10 +791,10 @@ Requires: libvirt-daemon-driver-network = %{version}-%{release}
The LXC driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
the Linux kernel
- %endif
+%endif
- %if %{with_uml}
+%if %{with_uml}
%package daemon-driver-uml
Summary: Uml driver plugin for the libvirtd daemon
Group: Development/Libraries
@@ -830,10 +804,10 @@ Requires: libvirt-daemon = %{version}-%{release}
The UML driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
User Mode Linux
- %endif
+%endif
- %if %{with_xen}
+%if %{with_xen}
%package daemon-driver-xen
Summary: Xen driver plugin for the libvirtd daemon
Group: Development/Libraries
@@ -843,10 +817,10 @@ Requires: libvirt-daemon = %{version}-%{release}
The Xen driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
Xen
- %endif
+%endif
- %if %{with_vbox}
+%if %{with_vbox}
%package daemon-driver-vbox
Summary: VirtualBox driver plugin for the libvirtd daemon
Group: Development/Libraries
@@ -856,10 +830,10 @@ Requires: libvirt-daemon = %{version}-%{release}
The vbox driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
VirtualBox
- %endif
+%endif
- %if %{with_libxl}
+%if %{with_libxl}
%package daemon-driver-libxl
Summary: Libxl driver plugin for the libvirtd daemon
Group: Development/Libraries
@@ -869,11 +843,11 @@ Requires: libvirt-daemon = %{version}-%{release}
The Libxl driver plugin for the libvirtd daemon, providing
an implementation of the hypervisor driver APIs using
Libxl
- %endif
+%endif
- %if %{with_qemu_tcg}
+%if %{with_qemu_tcg}
%package daemon-qemu
Summary: Server side daemon & driver required to run QEMU guests
Group: Development/Libraries
@@ -891,10 +865,10 @@ Requires: qemu
%description daemon-qemu
Server side daemon and driver required to manage the virtualization
capabilities of the QEMU TCG emulators
- %endif
+%endif
- %if %{with_qemu_kvm}
+%if %{with_qemu_kvm}
%package daemon-kvm
Summary: Server side daemon & driver required to run KVM guests
Group: Development/Libraries
@@ -912,10 +886,10 @@ Requires: qemu-kvm
%description daemon-kvm
Server side daemon and driver required to manage the virtualization
capabilities of the KVM hypervisor
- %endif
+%endif
- %if %{with_lxc}
+%if %{with_lxc}
%package daemon-lxc
Summary: Server side daemon & driver required to run LXC guests
Group: Development/Libraries
@@ -932,10 +906,10 @@ Requires: libvirt-daemon-driver-storage = %{version}-%{release}
%description daemon-lxc
Server side daemon and driver required to manage the virtualization
capabilities of LXC
- %endif
+%endif
- %if %{with_uml}
+%if %{with_uml}
%package daemon-uml
Summary: Server side daemon & driver required to run UML guests
Group: Development/Libraries
@@ -953,21 +927,21 @@ Requires: libvirt-daemon-driver-storage = %{version}-%{release}
%description daemon-uml
Server side daemon and driver required to manage the virtualization
capabilities of UML
- %endif
+%endif
- %if %{with_xen} || %{with_libxl}
+%if %{with_xen} || %{with_libxl}
%package daemon-xen
Summary: Server side daemon & driver required to run XEN guests
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
- %if %{with_xen}
+ %if %{with_xen}
Requires: libvirt-daemon-driver-xen = %{version}-%{release}
- %endif
- %if %{with_libxl}
+ %endif
+ %if %{with_libxl}
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
- %endif
+ %endif
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
Requires: libvirt-daemon-driver-network = %{version}-%{release}
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
@@ -979,9 +953,9 @@ Requires: xen
%description daemon-xen
Server side daemon and driver required to manage the virtualization
capabilities of XEN
- %endif
+%endif
- %if %{with_vbox}
+%if %{with_vbox}
%package daemon-vbox
Summary: Server side daemon & driver required to run VirtualBox guests
Group: Development/Libraries
@@ -998,8 +972,7 @@ Requires: libvirt-daemon-driver-storage = %{version}-%{release}
%description daemon-vbox
Server side daemon and driver required to manage the virtualization
capabilities of VirtualBox
- %endif
-%endif # %{with_libvirtd}
+%endif
%package client
Summary: Client side library and utilities of the libvirt library
@@ -1183,10 +1156,6 @@ rm -rf .git
%define _without_polkit --without-polkit
%endif
-%if ! %{with_libvirtd}
- %define _without_libvirtd --without-libvirtd
-%endif
-
%if ! %{with_uml}
%define _without_uml --without-uml
%endif
@@ -1347,7 +1316,7 @@ rm -f po/stamp-po
%{?_without_sasl} \
%{?_without_avahi} \
%{?_without_polkit} \
- %{?_without_libvirtd} \
+ --with-libvirtd \
%{?_without_uml} \
%{?_without_phyp} \
%{?_without_esx} \
@@ -1509,23 +1478,22 @@ then
exit 1
fi
-%if %{with_libvirtd}
%pre daemon
- %if %{with_polkit}
+%if %{with_polkit}
# 'libvirt' group is just to allow password-less polkit access to
# libvirtd. The uid number is irrelevant, so we use dynamic allocation
# described at the above link.
getent group libvirt >/dev/null || groupadd -r libvirt
- %endif
+%endif
exit 0
%post daemon
- %if %{with_systemd}
- %if %{with_systemd_macros}
- %systemd_post virtlockd.socket virtlogd.socket libvirtd.service
- %else
+%if %{with_systemd}
+ %if %{with_systemd_macros}
+ %systemd_post virtlockd.socket virtlogd.socket libvirtd.service
+ %else
if [ $1 -eq 1 ] ; then
# Initial installation
/bin/systemctl enable \
@@ -1533,28 +1501,28 @@ if [ $1 -eq 1 ] ; then
virtlogd.socket \
libvirtd.service >/dev/null 2>&1 || :
fi
- %endif
- %else
- %if %{with_cgconfig}
+ %endif
+%else
+ %if %{with_cgconfig}
# Starting with Fedora 16/RHEL-7, systemd automounts all cgroups,
# and cgconfig is no longer a necessary service.
- %if 0%{?rhel} && 0%{?rhel} < 7
+ %if 0%{?rhel} && 0%{?rhel} < 7
if [ "$1" -eq "1" ]; then
/sbin/chkconfig cgconfig on
fi
- %endif
%endif
+ %endif
/sbin/chkconfig --add libvirtd
/sbin/chkconfig --add virtlogd
/sbin/chkconfig --add virtlockd
- %endif
+%endif
%preun daemon
- %if %{with_systemd}
- %if %{with_systemd_macros}
- %systemd_preun libvirtd.service virtlogd.socket virtlogd.service virtlockd.socket virtlockd.service
- %else
+%if %{with_systemd}
+ %if %{with_systemd_macros}
+ %systemd_preun libvirtd.service virtlogd.socket virtlogd.service virtlockd.socket virtlockd.service
+ %else
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
/bin/systemctl --no-reload disable \
@@ -1570,8 +1538,8 @@ if [ $1 -eq 0 ] ; then
virtlockd.socket \
virtlockd.service > /dev/null 2>&1 || :
fi
- %endif
- %else
+ %endif
+%else
if [ $1 = 0 ]; then
/sbin/service libvirtd stop 1>/dev/null 2>&1
/sbin/chkconfig --del libvirtd
@@ -1580,33 +1548,33 @@ if [ $1 = 0 ]; then
/sbin/service virtlockd stop 1>/dev/null 2>&1
/sbin/chkconfig --del virtlockd
fi
- %endif
+%endif
%postun daemon
- %if %{with_systemd}
+%if %{with_systemd}
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
/bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || :
/bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || :
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
fi
- %else
+%else
if [ $1 -ge 1 ]; then
/sbin/service virtlockd reload > /dev/null 2>&1 || :
/sbin/service virtlogd reload > /dev/null 2>&1 || :
/sbin/service libvirtd condrestart > /dev/null 2>&1
fi
- %endif
+%endif
- %if %{with_systemd}
- %else
+%if %{with_systemd}
+%else
%triggerpostun daemon -- libvirt-daemon < 1.2.1
if [ "$1" -ge "1" ]; then
/sbin/service virtlockd reload > /dev/null 2>&1 || :
/sbin/service virtlogd reload > /dev/null 2>&1 || :
/sbin/service libvirtd condrestart > /dev/null 2>&1
fi
- %endif
+%endif
# In upgrade scenario we must explicitly enable virtlockd/virtlogd
# sockets, if libvirtd is already enabled and start them if
@@ -1614,20 +1582,20 @@ fi
# guests
%triggerpostun daemon -- libvirt-daemon < 1.3.0
if [ $1 -ge 1 ] ; then
- %if %{with_systemd}
+%if %{with_systemd}
/bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 &&
/bin/systemctl enable virtlogd.socket || :
/bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 &&
/bin/systemctl start virtlogd.socket || :
- %else
+%else
/sbin/chkconfig libvirtd 1>/dev/null 2>&1 &&
/sbin/chkconfig virtlogd on || :
/sbin/service libvirtd status 1>/dev/null 2>&1 &&
/sbin/service virtlogd start || :
- %endif
+%endif
fi
- %if %{with_network}
+%if %{with_network}
%post daemon-config-network
if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
# see if the network used by default network creates a conflict,
@@ -1666,16 +1634,16 @@ if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ;
ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
# Make sure libvirt picks up the new network defininiton
- %if %{with_systemd}
+ %if %{with_systemd}
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 ||:
- %else
+ %else
/sbin/service libvirtd condrestart > /dev/null 2>&1 || :
- %endif
+ %endif
fi
- %endif
+%endif
- %if %{with_systemd}
+%if %{with_systemd}
%triggerun -- libvirt < 0.9.4
%{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
@@ -1685,9 +1653,9 @@ fi
# Run these because the SysV package being removed won't do them
/sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
- %endif
+%endif
- %if %{with_qemu}
+%if %{with_qemu}
%pre daemon-driver-qemu
# We want soft static allocation of well-known ids, as disk images
# are commonly shared across NFS mounts by id rather than name; see
@@ -1702,8 +1670,7 @@ if ! getent passwd qemu >/dev/null; then
fi
fi
exit 0
- %endif
-%endif # %{with_libvirtd}
+%endif
%preun client
@@ -1785,23 +1752,22 @@ exit 0
%doc examples/systemtap
-%if %{with_libvirtd}
%files daemon
%defattr(-, root, root)
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
- %if %{with_systemd}
+%if %{with_systemd}
%{_unitdir}/libvirtd.service
%{_unitdir}/virtlogd.service
%{_unitdir}/virtlogd.socket
%{_unitdir}/virtlockd.service
%{_unitdir}/virtlockd.socket
- %else
+%else
%{_sysconfdir}/rc.d/init.d/libvirtd
%{_sysconfdir}/rc.d/init.d/virtlogd
%{_sysconfdir}/rc.d/init.d/virtlockd
- %endif
+%endif
%doc daemon/libvirtd.upstart
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
%config(noreplace) %{_sysconfdir}/sysconfig/virtlogd
@@ -1832,23 +1798,23 @@ exit 0
%{_datadir}/augeas/lenses/virtlockd.aug
%{_datadir}/augeas/lenses/tests/test_virtlockd.aug
%{_datadir}/augeas/lenses/libvirt_lockd.aug
- %if %{with_qemu}
+%if %{with_qemu}
%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
- %endif
+%endif
- %if %{with_polkit}
+%if %{with_polkit}
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
%{_datadir}/polkit-1/actions/org.libvirt.api.policy
%{_datadir}/polkit-1/rules.d/50-libvirt.rules
- %endif
+%endif
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
- %if %{with_apparmor}
+%if %{with_apparmor}
%attr(0755, root, root) %{_libexecdir}/virt-aa-helper
- %endif
+%endif
%attr(0755, root, root) %{_sbindir}/libvirtd
%attr(0755, root, root) %{_sbindir}/virtlogd
@@ -1860,26 +1826,26 @@ exit 0
%doc examples/polkit/*.rules
- %if %{with_network}
+%if %{with_network}
%files daemon-config-network
%defattr(-, root, root)
%dir %{_datadir}/libvirt/networks/
%{_datadir}/libvirt/networks/default.xml
- %endif
+%endif
- %if %{with_nwfilter}
+%if %{with_nwfilter}
%files daemon-config-nwfilter
%defattr(-, root, root)
%{_sysconfdir}/libvirt/nwfilter/*.xml
- %endif
+%endif
- %if %{with_interface}
+%if %{with_interface}
%files daemon-driver-interface
%defattr(-, root, root)
%{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
- %endif
+%endif
- %if %{with_network}
+%if %{with_network}
%files daemon-driver-network
%defattr(-, root, root)
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
@@ -1890,36 +1856,36 @@ exit 0
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper
%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
- %endif
+%endif
- %if %{with_nodedev}
+%if %{with_nodedev}
%files daemon-driver-nodedev
%defattr(-, root, root)
%{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
- %endif
+%endif
- %if %{with_nwfilter}
+%if %{with_nwfilter}
%files daemon-driver-nwfilter
%defattr(-, root, root)
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
%ghost %dir %{_localstatedir}/run/libvirt/network/
%{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
- %endif
+%endif
%files daemon-driver-secret
%defattr(-, root, root)
%{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
- %if %{with_storage}
+%if %{with_storage}
%files daemon-driver-storage
%defattr(-, root, root)
- %if %{with_storage_disk}
+ %if %{with_storage_disk}
%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
- %endif
-%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
%endif
+%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
+%endif
- %if %{with_qemu}
+%if %{with_qemu}
%files daemon-driver-qemu
%defattr(-, root, root)
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
@@ -1933,9 +1899,9 @@ exit 0
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
- %endif
+%endif
- %if %{with_lxc}
+%if %{with_lxc}
%files daemon-driver-lxc
%defattr(-, root, root)
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
@@ -1947,9 +1913,9 @@ exit 0
%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
%{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
- %endif
+%endif
- %if %{with_uml}
+%if %{with_uml}
%files daemon-driver-uml
%defattr(-, root, root)
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
@@ -1957,16 +1923,16 @@ exit 0
%ghost %dir %{_localstatedir}/run/libvirt/uml/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
%{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
- %endif
+%endif
- %if %{with_xen}
+%if %{with_xen}
%files daemon-driver-xen
%defattr(-, root, root)
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
%{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
- %endif
+%endif
- %if %{with_libxl}
+%if %{with_libxl}
%files daemon-driver-libxl
%defattr(-, root, root)
%config(noreplace) %{_sysconfdir}/libvirt/libxl.conf
@@ -1978,44 +1944,43 @@ exit 0
%ghost %dir %{_localstatedir}/run/libvirt/libxl/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
%{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
- %endif
+%endif
- %if %{with_vbox}
+%if %{with_vbox}
%files daemon-driver-vbox
%defattr(-, root, root)
%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
- %endif
+%endif
- %if %{with_qemu_tcg}
+%if %{with_qemu_tcg}
%files daemon-qemu
%defattr(-, root, root)
- %endif
+%endif
- %if %{with_qemu_kvm}
+%if %{with_qemu_kvm}
%files daemon-kvm
%defattr(-, root, root)
- %endif
+%endif
- %if %{with_lxc}
+%if %{with_lxc}
%files daemon-lxc
%defattr(-, root, root)
- %endif
+%endif
- %if %{with_uml}
+%if %{with_uml}
%files daemon-uml
%defattr(-, root, root)
- %endif
+%endif
- %if %{with_xen} || %{with_libxl}
+%if %{with_xen} || %{with_libxl}
%files daemon-xen
%defattr(-, root, root)
- %endif
+%endif
- %if %{with_vbox}
+%if %{with_vbox}
%files daemon-vbox
%defattr(-, root, root)
- %endif
-%endif # %{with_libvirtd}
+%endif
%if %{with_sanlock}
%files lock-sanlock
--
2.5.5
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list