Move all code that modifies host system to this function.
Signed-off-by: Pavel Hrdina <phrdina@xxxxxxxxxx>
---
src/qemu/qemu_migration.c | 3 +
src/qemu/qemu_process.c | 191 +++++++++++++++++++++++++---------------------
src/qemu/qemu_process.h | 4 +
3 files changed, 113 insertions(+), 85 deletions(-)
diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
index 0b1d37b..f204855 100644
--- a/src/qemu/qemu_migration.c
+++ b/src/qemu/qemu_migration.c
@@ -3479,6 +3479,9 @@ qemuMigrationPrepareAny(virQEMUDriverPtr driver,
VIR_QEMU_PROCESS_START_AUTODESTROY) < 0)
goto stopjob;
+ if (qemuProcessPrepareHost(driver, vm, !!incoming) < 0)
+ goto stopjob;
+
rv = qemuProcessLaunch(dconn, driver, vm, QEMU_ASYNC_JOB_MIGRATION_IN,
incoming, NULL,
VIR_NETDEV_VPORT_PROFILE_OP_MIGRATE_IN_START,
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index df44fad..32efafb 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -4396,8 +4396,6 @@ qemuProcessInit(virQEMUDriverPtr driver,
if (virDomainObjSetDefTransient(caps, driver->xmlopt, vm, true) < 0)
goto stop;
- if (qemuPrepareNVRAM(cfg, vm, migration) < 0)
- goto stop;
vm->def->id = qemuDriverAllocateID(driver);
qemuDomainSetFakeReboot(driver, vm, false);
@@ -4824,6 +4822,109 @@ qemuProcessPrepareDomain(virConnectPtr conn,
}
+int
+qemuProcessPrepareHost(virQEMUDriverPtr driver,
+ virDomainObjPtr vm,
+ bool incoming)
+{
+ int ret = -1;
+ unsigned int hostdev_flags = 0;
+ size_t i;
+ qemuDomainObjPrivatePtr priv = vm->privateData;
+ virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
+
+ if (qemuPrepareNVRAM(cfg, vm, incoming) < 0)
+ goto cleanup;
+
+ /* network devices must be "prepared" before hostdevs, because
+ * setting up a network device might create a new hostdev that
+ * will need to be setup.
+ */
+ VIR_DEBUG("Preparing network devices");
+ if (qemuProcessNetworkPrepareDevices(vm->def) < 0)
+ goto cleanup;
+
+ /* Must be run before security labelling */
+ VIR_DEBUG("Preparing host devices");
+ if (!cfg->relaxedACS)
+ hostdev_flags |= VIR_HOSTDEV_STRICT_ACS_CHECK;
+ if (!incoming)
+ hostdev_flags |= VIR_HOSTDEV_COLD_BOOT;
+ if (qemuHostdevPrepareDomainDevices(driver, vm->def, priv->qemuCaps,
+ hostdev_flags) < 0)
+ goto cleanup;
+
+ VIR_DEBUG("Preparing chr devices");
+ if (virDomainChrDefForeach(vm->def,
+ true,
+ qemuProcessPrepareChardevDevice,
+ NULL) < 0)
+ goto cleanup;
+
+ if (vm->def->mem.nhugepages) {
+ for (i = 0; i < cfg->nhugetlbfs; i++) {
+ char *hugepagePath = qemuGetHugepagePath(&cfg->hugetlbfs[i]);
+
+ if (!hugepagePath)
+ goto cleanup;
+
+ if (virSecurityManagerSetHugepages(driver->securityManager,
+ vm->def, hugepagePath) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ "%s", _("Unable to set huge path in security driver"));
+ VIR_FREE(hugepagePath);
+ goto cleanup;
+ }
+ VIR_FREE(hugepagePath);
+ }
+ }
+
+ /* Ensure no historical cgroup for this VM is lying around bogus
+ * settings */
+ VIR_DEBUG("Ensuring no historical cgroup is lying around");
+ qemuRemoveCgroup(vm);
+
+ VIR_DEBUG("Setting up ports for graphics");
+ if (qemuProcessSetupGraphics(driver, vm) < 0)
+ goto cleanup;
+
+ if (virFileMakePath(cfg->logDir) < 0) {
+ virReportSystemError(errno,
+ _("cannot create log directory %s"),
+ cfg->logDir);
+ goto cleanup;
+ }
+
+ VIR_FREE(priv->pidfile);
+ if (!(priv->pidfile = virPidFileBuildPath(cfg->stateDir, vm->def->name))) {
+ virReportSystemError(errno,
+ "%s", _("Failed to build pidfile path."));
+ goto cleanup;
+ }
+
+ if (unlink(priv->pidfile) < 0 &&
+ errno != ENOENT) {
+ virReportSystemError(errno,
+ _("Cannot remove stale PID file %s"),
+ priv->pidfile);
+ goto cleanup;
+ }
+
+ /*
+ * Create all per-domain directories in order to make sure domain
+ * with any possible seclabels can access it.
+ */
+ if (qemuProcessMakeDir(driver, vm, priv->libDir) < 0 ||
+ qemuProcessMakeDir(driver, vm, priv->channelTargetDir) < 0)
+ goto cleanup;
+
+ ret = 0;
+ cleanup:
+ virObjectUnref(cfg);
+ return ret;
+}
+
+
/**
* qemuProcessLaunch:
*
@@ -4857,7 +4958,6 @@ qemuProcessLaunch(virConnectPtr conn,
size_t i;
virQEMUDriverConfigPtr cfg;
virCapsPtr caps = NULL;
- unsigned int hostdev_flags = 0;
size_t nnicindexes = 0;
int *nicindexes = NULL;
bool check_shmem = false;
@@ -4890,69 +4990,10 @@ qemuProcessLaunch(virConnectPtr conn,
if (!(caps = virQEMUDriverGetCapabilities(driver, false)))
goto cleanup;
- /* network devices must be "prepared" before hostdevs, because
- * setting up a network device might create a new hostdev that
- * will need to be setup.
- */
- VIR_DEBUG("Preparing network devices");
- if (qemuProcessNetworkPrepareDevices(vm->def) < 0)
- goto cleanup;
-
- /* Must be run before security labelling */
- VIR_DEBUG("Preparing host devices");
- if (!cfg->relaxedACS)
- hostdev_flags |= VIR_HOSTDEV_STRICT_ACS_CHECK;
- if (!incoming)
- hostdev_flags |= VIR_HOSTDEV_COLD_BOOT;
- if (qemuHostdevPrepareDomainDevices(driver, vm->def, priv->qemuCaps,
- hostdev_flags) < 0)
- goto cleanup;
-
- VIR_DEBUG("Preparing chr devices");
- if (virDomainChrDefForeach(vm->def,
- true,
- qemuProcessPrepareChardevDevice,
- NULL) < 0)
- goto cleanup;
-
VIR_DEBUG("Checking domain and device security labels");
if (virSecurityManagerCheckAllLabel(driver->securityManager, vm->def) < 0)
goto cleanup;
- if (vm->def->mem.nhugepages) {
- for (i = 0; i < cfg->nhugetlbfs; i++) {
- char *hugepagePath = qemuGetHugepagePath(&cfg->hugetlbfs[i]);
-
- if (!hugepagePath)
- goto cleanup;
-
- if (virSecurityManagerSetHugepages(driver->securityManager,
- vm->def, hugepagePath) < 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- "%s", _("Unable to set huge path in security driver"));
- VIR_FREE(hugepagePath);
- goto cleanup;
- }
- VIR_FREE(hugepagePath);
- }
- }
-
- /* Ensure no historical cgroup for this VM is lying around bogus
- * settings */
- VIR_DEBUG("Ensuring no historical cgroup is lying around");
- qemuRemoveCgroup(vm);
-
- VIR_DEBUG("Setting up ports for graphics");
- if (qemuProcessSetupGraphics(driver, vm) < 0)
- goto cleanup;
-
- if (virFileMakePath(cfg->logDir) < 0) {
- virReportSystemError(errno,
- _("cannot create log directory %s"),
- cfg->logDir);
- goto cleanup;
- }
-
VIR_DEBUG("Creating domain log file");
if (!(logCtxt = qemuDomainLogContextNew(driver, vm,
QEMU_DOMAIN_LOG_CONTEXT_MODE_START)))
@@ -4989,21 +5030,6 @@ qemuProcessLaunch(virConnectPtr conn,
vm->def->id) < 0)
goto cleanup;
- VIR_FREE(priv->pidfile);
- if (!(priv->pidfile = virPidFileBuildPath(cfg->stateDir, vm->def->name))) {
- virReportSystemError(errno,
- "%s", _("Failed to build pidfile path."));
- goto cleanup;
- }
-
- if (unlink(priv->pidfile) < 0 &&
- errno != ENOENT) {
- virReportSystemError(errno,
- _("Cannot remove stale PID file %s"),
- priv->pidfile);
- goto cleanup;
- }
-
VIR_DEBUG("Checking for any possible (non-fatal) issues");
/*
@@ -5066,14 +5092,6 @@ qemuProcessLaunch(virConnectPtr conn,
if (incoming && incoming->fd != -1)
virCommandPassFD(cmd, incoming->fd, 0);
- /*
- * Create all per-domain directories in order to make sure domain
- * with any possible seclabels can access it.
- */
- if (qemuProcessMakeDir(driver, vm, priv->libDir) < 0 ||
- qemuProcessMakeDir(driver, vm, priv->channelTargetDir) < 0)
- goto cleanup;
-
/* now that we know it is about to start call the hook if present */
if (qemuProcessStartHook(driver, vm,
VIR_HOOK_QEMU_OP_START,
@@ -5391,6 +5409,9 @@ qemuProcessStart(virConnectPtr conn,
if (qemuProcessPrepareDomain(conn, driver, vm, flags) < 0)
goto stop;
+ if (qemuProcessPrepareHost(driver, vm, !!incoming) < 0)
+ goto stop;
+
if ((rv = qemuProcessLaunch(conn, driver, vm, asyncJob, incoming,
snapshot, vmop, flags)) < 0) {
if (rv == -2)
diff --git a/src/qemu/qemu_process.h b/src/qemu/qemu_process.h
index ef5afa8..049c097 100644
--- a/src/qemu/qemu_process.h
+++ b/src/qemu/qemu_process.h
@@ -98,6 +98,10 @@ int qemuProcessPrepareDomain(virConnectPtr conn,
virDomainObjPtr vm,
unsigned int flags);
+int qemuProcessPrepareHost(virQEMUDriverPtr driver,
+ virDomainObjPtr vm,
+ bool incoming);
+
int qemuProcessLaunch(virConnectPtr conn,
virQEMUDriverPtr driver,
virDomainObjPtr vm,
--
2.7.2
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list