This is not just a cosmetic change: the name of the variable now
gives a hint about what it is supposed to be used for.
---
src/util/virhostdev.c | 234 +++++++++++++++++++++++++-------------------------
1 file changed, 117 insertions(+), 117 deletions(-)
diff --git a/src/util/virhostdev.c b/src/util/virhostdev.c
index a7fb8b1..10d1c1a 100644
--- a/src/util/virhostdev.c
+++ b/src/util/virhostdev.c
@@ -62,33 +62,33 @@ struct virHostdevIsPCINodeDeviceUsedData {
static int virHostdevIsPCINodeDeviceUsed(virPCIDeviceAddressPtr devAddr, void *opaque)
{
- virPCIDevicePtr other;
+ virPCIDevicePtr actual;
int ret = -1;
struct virHostdevIsPCINodeDeviceUsedData *helperData = opaque;
- other = virPCIDeviceListFindByIDs(helperData->mgr->activePCIHostdevs,
- devAddr->domain, devAddr->bus,
- devAddr->slot, devAddr->function);
- if (other) {
- const char *other_drvname = NULL;
- const char *other_domname = NULL;
- virPCIDeviceGetUsedBy(other, &other_drvname, &other_domname);
+ actual = virPCIDeviceListFindByIDs(helperData->mgr->activePCIHostdevs,
+ devAddr->domain, devAddr->bus,
+ devAddr->slot, devAddr->function);
+ if (actual) {
+ const char *actual_drvname = NULL;
+ const char *actual_domname = NULL;
+ virPCIDeviceGetUsedBy(actual, &actual_drvname, &actual_domname);
if (helperData->usesVFIO &&
- (other_domname && helperData->domainName) &&
- (STREQ(other_domname, helperData->domainName)))
+ (actual_domname && helperData->domainName) &&
+ (STREQ(actual_domname, helperData->domainName)))
goto iommu_owner;
- if (other_drvname && other_domname)
+ if (actual_drvname && actual_domname)
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is in use by "
"driver %s, domain %s"),
- virPCIDeviceGetName(other),
- other_drvname, other_domname);
+ virPCIDeviceGetName(actual),
+ actual_drvname, actual_domname);
else
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is in use"),
- virPCIDeviceGetName(other));
+ virPCIDeviceGetName(actual));
goto cleanup;
}
iommu_owner:
@@ -203,45 +203,45 @@ virHostdevManagerGetDefault(void)
static virPCIDeviceListPtr
virHostdevGetPCIHostDeviceList(virDomainHostdevDefPtr *hostdevs, int nhostdevs)
{
- virPCIDeviceListPtr list;
+ virPCIDeviceListPtr pcidevs;
size_t i;
- if (!(list = virPCIDeviceListNew()))
+ if (!(pcidevs = virPCIDeviceListNew()))
return NULL;
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
virDomainHostdevSubsysPCIPtr pcisrc = &hostdev->source.subsys.u.pci;
- virPCIDevicePtr dev;
+ virPCIDevicePtr pci;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
- dev = virPCIDeviceNew(pcisrc->addr.domain, pcisrc->addr.bus,
+ pci = virPCIDeviceNew(pcisrc->addr.domain, pcisrc->addr.bus,
pcisrc->addr.slot, pcisrc->addr.function);
- if (!dev) {
- virObjectUnref(list);
+ if (!pci) {
+ virObjectUnref(pcidevs);
return NULL;
}
- if (virPCIDeviceListAdd(list, dev) < 0) {
- virPCIDeviceFree(dev);
- virObjectUnref(list);
+ if (virPCIDeviceListAdd(pcidevs, pci) < 0) {
+ virPCIDeviceFree(pci);
+ virObjectUnref(pcidevs);
return NULL;
}
- virPCIDeviceSetManaged(dev, hostdev->managed);
+ virPCIDeviceSetManaged(pci, hostdev->managed);
if (pcisrc->backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO)
- virPCIDeviceSetStubDriver(dev, VIR_PCI_STUB_DRIVER_VFIO);
+ virPCIDeviceSetStubDriver(pci, VIR_PCI_STUB_DRIVER_VFIO);
else if (pcisrc->backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN)
- virPCIDeviceSetStubDriver(dev, VIR_PCI_STUB_DRIVER_XEN);
+ virPCIDeviceSetStubDriver(pci, VIR_PCI_STUB_DRIVER_XEN);
else
- virPCIDeviceSetStubDriver(dev, VIR_PCI_STUB_DRIVER_KVM);
+ virPCIDeviceSetStubDriver(pci, VIR_PCI_STUB_DRIVER_KVM);
}
- return list;
+ return pcidevs;
}
@@ -511,15 +511,15 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
* to pci-stub.ko
*/
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
bool strict_acs_check = !!(flags & VIR_HOSTDEV_STRICT_ACS_CHECK);
- bool usesVFIO = (virPCIDeviceGetStubDriver(dev) == VIR_PCI_STUB_DRIVER_VFIO);
+ bool usesVFIO = (virPCIDeviceGetStubDriver(pci) == VIR_PCI_STUB_DRIVER_VFIO);
struct virHostdevIsPCINodeDeviceUsedData data = { mgr, dom_name, usesVFIO };
- if (!usesVFIO && !virPCIDeviceIsAssignable(dev, strict_acs_check)) {
+ if (!usesVFIO && !virPCIDeviceIsAssignable(pci, strict_acs_check)) {
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is not assignable"),
- virPCIDeviceGetName(dev));
+ virPCIDeviceGetName(pci));
goto cleanup;
}
@@ -528,7 +528,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
* belonging to same iommu group can't be shared
* across guests.
*/
- devAddr = virPCIDeviceGetAddress(dev);
+ devAddr = virPCIDeviceGetAddress(pci);
if (usesVFIO) {
if (virPCIDeviceAddressIOMMUGroupIterate(devAddr,
virHostdevIsPCINodeDeviceUsed,
@@ -541,18 +541,18 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
/* Step 2: detach managed devices (i.e. bind to appropriate stub driver) */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
- if (virPCIDeviceGetManaged(dev)) {
+ if (virPCIDeviceGetManaged(pci)) {
VIR_DEBUG("Detaching managed PCI device %s",
- virPCIDeviceGetName(dev));
- if (virPCIDeviceDetach(dev,
+ virPCIDeviceGetName(pci));
+ if (virPCIDeviceDetach(pci,
mgr->activePCIHostdevs,
mgr->inactivePCIHostdevs) < 0)
goto reattachdevs;
} else {
VIR_DEBUG("Not detaching unmanaged PCI device %s",
- virPCIDeviceGetName(dev));
+ virPCIDeviceGetName(pci));
}
}
@@ -562,10 +562,10 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
/* Step 3: Now that all the PCI hostdevs have been detached, we
* can safely reset them */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
- VIR_DEBUG("Resetting PCI device %s", virPCIDeviceGetName(dev));
- if (virPCIDeviceReset(dev, mgr->activePCIHostdevs,
+ VIR_DEBUG("Resetting PCI device %s", virPCIDeviceGetName(pci));
+ if (virPCIDeviceReset(pci, mgr->activePCIHostdevs,
mgr->inactivePCIHostdevs) < 0)
goto reattachdevs;
}
@@ -585,41 +585,41 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
/* Step 5: Now mark all the devices as active */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
VIR_DEBUG("Adding PCI device %s to active list",
- virPCIDeviceGetName(dev));
- if (virPCIDeviceListAdd(mgr->activePCIHostdevs, dev) < 0)
+ virPCIDeviceGetName(pci));
+ if (virPCIDeviceListAdd(mgr->activePCIHostdevs, pci) < 0)
goto inactivedevs;
}
/* Step 6: Now remove the devices from inactive list. */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
VIR_DEBUG("Removing PCI device %s from inactive list",
- virPCIDeviceGetName(dev));
- virPCIDeviceListDel(mgr->inactivePCIHostdevs, dev);
+ virPCIDeviceGetName(pci));
+ virPCIDeviceListDel(mgr->inactivePCIHostdevs, pci);
}
/* Step 7: Now set the used_by_domain of the device in
* activePCIHostdevs as domain name.
*/
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev, activeDev;
+ virPCIDevicePtr pci, actual;
- dev = virPCIDeviceListGet(pcidevs, i);
- activeDev = virPCIDeviceListFind(mgr->activePCIHostdevs, dev);
+ pci = virPCIDeviceListGet(pcidevs, i);
+ actual = virPCIDeviceListFind(mgr->activePCIHostdevs, pci);
VIR_DEBUG("Setting driver and domain information for PCI device %s",
- virPCIDeviceGetName(dev));
- if (activeDev)
- virPCIDeviceSetUsedBy(activeDev, drv_name, dom_name);
+ virPCIDeviceGetName(pci));
+ if (actual)
+ virPCIDeviceSetUsedBy(actual, drv_name, dom_name);
}
/* Step 8: Now set the original states for hostdev def */
for (i = 0; i < nhostdevs; i++) {
- virPCIDevicePtr dev;
+ virPCIDevicePtr pci;
virDomainHostdevDefPtr hostdev = hostdevs[i];
virDomainHostdevSubsysPCIPtr pcisrc = &hostdev->source.subsys.u.pci;
@@ -628,7 +628,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
- dev = virPCIDeviceListFindByIDs(pcidevs,
+ pci = virPCIDeviceListFindByIDs(pcidevs,
pcisrc->addr.domain,
pcisrc->addr.bus,
pcisrc->addr.slot,
@@ -637,15 +637,15 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
/* Appropriate values for the unbind_from_stub, remove_slot
* and reprobe properties of the device were set earlier
* by virPCIDeviceDetach() */
- if (dev) {
+ if (pci) {
VIR_DEBUG("Saving network configuration of PCI device %s",
- virPCIDeviceGetName(dev));
+ virPCIDeviceGetName(pci));
hostdev->origstates.states.pci.unbind_from_stub =
- virPCIDeviceGetUnbindFromStub(dev);
+ virPCIDeviceGetUnbindFromStub(pci);
hostdev->origstates.states.pci.remove_slot =
- virPCIDeviceGetRemoveSlot(dev);
+ virPCIDeviceGetRemoveSlot(pci);
hostdev->origstates.states.pci.reprobe =
- virPCIDeviceGetReprobe(dev);
+ virPCIDeviceGetReprobe(pci);
}
}
@@ -661,11 +661,11 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
* free them in virObjectUnref().
*/
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
VIR_DEBUG("Removing PCI device %s from active list",
- virPCIDeviceGetName(dev));
- virPCIDeviceListSteal(mgr->activePCIHostdevs, dev);
+ virPCIDeviceGetName(pci));
+ virPCIDeviceListSteal(mgr->activePCIHostdevs, pci);
}
resetvfnetconfig:
@@ -674,17 +674,17 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
reattachdevs:
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
- if (virPCIDeviceGetManaged(dev)) {
+ if (virPCIDeviceGetManaged(pci)) {
VIR_DEBUG("Reattaching managed PCI device %s",
- virPCIDeviceGetName(dev));
- ignore_value(virPCIDeviceReattach(dev,
+ virPCIDeviceGetName(pci));
+ ignore_value(virPCIDeviceReattach(pci,
mgr->activePCIHostdevs,
mgr->inactivePCIHostdevs));
} else {
VIR_DEBUG("Not reattaching unmanaged PCI device %s",
- virPCIDeviceGetName(dev));
+ virPCIDeviceGetName(pci));
}
}
@@ -702,38 +702,38 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr mgr,
*/
static void
virHostdevReattachPCIDevice(virHostdevManagerPtr mgr,
- virPCIDevicePtr dev)
+ virPCIDevicePtr actual)
{
/* If the device is not managed and was attached to guest
* successfully, it must have been inactive.
*/
- if (!virPCIDeviceGetManaged(dev)) {
+ if (!virPCIDeviceGetManaged(actual)) {
VIR_DEBUG("Adding unmanaged PCI device %s to inactive list",
- virPCIDeviceGetName(dev));
- if (virPCIDeviceListAdd(mgr->inactivePCIHostdevs, dev) < 0)
- virPCIDeviceFree(dev);
+ virPCIDeviceGetName(actual));
+ if (virPCIDeviceListAdd(mgr->inactivePCIHostdevs, actual) < 0)
+ virPCIDeviceFree(actual);
return;
}
/* Wait for device cleanup if it is qemu/kvm */
- if (virPCIDeviceGetStubDriver(dev) == VIR_PCI_STUB_DRIVER_KVM) {
+ if (virPCIDeviceGetStubDriver(actual) == VIR_PCI_STUB_DRIVER_KVM) {
int retries = 100;
- while (virPCIDeviceWaitForCleanup(dev, "kvm_assigned_device")
+ while (virPCIDeviceWaitForCleanup(actual, "kvm_assigned_device")
&& retries) {
usleep(100*1000);
retries--;
}
}
- VIR_DEBUG("Reattaching PCI device %s", virPCIDeviceGetName(dev));
- if (virPCIDeviceReattach(dev, mgr->activePCIHostdevs,
+ VIR_DEBUG("Reattaching PCI device %s", virPCIDeviceGetName(actual));
+ if (virPCIDeviceReattach(actual, mgr->activePCIHostdevs,
mgr->inactivePCIHostdevs) < 0) {
virErrorPtr err = virGetLastError();
VIR_ERROR(_("Failed to re-attach PCI device: %s"),
err ? err->message : _("unknown error"));
virResetError(err);
}
- virPCIDeviceFree(dev);
+ virPCIDeviceFree(actual);
}
/* @oldStateDir:
@@ -772,28 +772,28 @@ virHostdevReAttachPCIDevices(virHostdevManagerPtr mgr,
*/
i = 0;
while (i < virPCIDeviceListCount(pcidevs)) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
- virPCIDevicePtr activeDev = NULL;
-
- activeDev = virPCIDeviceListFind(mgr->activePCIHostdevs, dev);
- if (activeDev) {
- const char *usedby_drvname;
- const char *usedby_domname;
- virPCIDeviceGetUsedBy(activeDev, &usedby_drvname, &usedby_domname);
- if (STRNEQ_NULLABLE(drv_name, usedby_drvname) ||
- STRNEQ_NULLABLE(dom_name, usedby_domname)) {
-
- virPCIDeviceListDel(pcidevs, dev);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr actual = NULL;
+
+ actual = virPCIDeviceListFind(mgr->activePCIHostdevs, pci);
+ if (actual) {
+ const char *actual_drvname;
+ const char *actual_domname;
+ virPCIDeviceGetUsedBy(actual, &actual_drvname, &actual_domname);
+ if (STRNEQ_NULLABLE(drv_name, actual_drvname) ||
+ STRNEQ_NULLABLE(dom_name, actual_domname)) {
+
+ virPCIDeviceListDel(pcidevs, pci);
continue;
}
} else {
- virPCIDeviceListDel(pcidevs, dev);
+ virPCIDeviceListDel(pcidevs, pci);
continue;
}
VIR_DEBUG("Removing PCI device %s from active list",
- virPCIDeviceGetName(dev));
- virPCIDeviceListDel(mgr->activePCIHostdevs, dev);
+ virPCIDeviceGetName(pci));
+ virPCIDeviceListDel(mgr->activePCIHostdevs, pci);
i++;
}
@@ -809,17 +809,17 @@ virHostdevReAttachPCIDevices(virHostdevManagerPtr mgr,
if (virHostdevIsPCINetDevice(hostdev)) {
virDomainHostdevSubsysPCIPtr pcisrc = &hostdev->source.subsys.u.pci;
- virPCIDevicePtr dev;
+ virPCIDevicePtr pci;
- dev = virPCIDeviceListFindByIDs(pcidevs,
+ pci = virPCIDeviceListFindByIDs(pcidevs,
pcisrc->addr.domain,
pcisrc->addr.bus,
pcisrc->addr.slot,
pcisrc->addr.function);
- if (dev) {
+ if (pci) {
VIR_DEBUG("Restoring network configuration of PCI device %s",
- virPCIDeviceGetName(dev));
+ virPCIDeviceGetName(pci));
virHostdevNetConfigRestore(hostdev, mgr->stateDir,
oldStateDir);
}
@@ -828,10 +828,10 @@ virHostdevReAttachPCIDevices(virHostdevManagerPtr mgr,
/* Step 3: perform a PCI Reset on all devices */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
- virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
+ virPCIDevicePtr pci = virPCIDeviceListGet(pcidevs, i);
- VIR_DEBUG("Resetting PCI device %s", virPCIDeviceGetName(dev));
- if (virPCIDeviceReset(dev, mgr->activePCIHostdevs,
+ VIR_DEBUG("Resetting PCI device %s", virPCIDeviceGetName(pci));
+ if (virPCIDeviceReset(pci, mgr->activePCIHostdevs,
mgr->inactivePCIHostdevs) < 0) {
virErrorPtr err = virGetLastError();
VIR_ERROR(_("Failed to reset PCI device: %s"),
@@ -844,8 +844,8 @@ virHostdevReAttachPCIDevices(virHostdevManagerPtr mgr,
* them on the inactive list (if not managed)
*/
while (virPCIDeviceListCount(pcidevs) > 0) {
- virPCIDevicePtr dev = virPCIDeviceListStealIndex(pcidevs, 0);
- virHostdevReattachPCIDevice(mgr, dev);
+ virPCIDevicePtr pci = virPCIDeviceListStealIndex(pcidevs, 0);
+ virHostdevReattachPCIDevice(mgr, pci);
}
virObjectUnref(pcidevs);
@@ -862,7 +862,7 @@ virHostdevUpdateActivePCIDevices(virHostdevManagerPtr mgr,
const char *dom_name)
{
virDomainHostdevDefPtr hostdev = NULL;
- virPCIDevicePtr dev = NULL;
+ virPCIDevicePtr actual = NULL;
size_t i;
int ret = -1;
@@ -882,35 +882,35 @@ virHostdevUpdateActivePCIDevices(virHostdevManagerPtr mgr,
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
- dev = virPCIDeviceNew(pcisrc->addr.domain, pcisrc->addr.bus,
- pcisrc->addr.slot, pcisrc->addr.function);
+ actual = virPCIDeviceNew(pcisrc->addr.domain, pcisrc->addr.bus,
+ pcisrc->addr.slot, pcisrc->addr.function);
- if (!dev)
+ if (!actual)
goto cleanup;
- virPCIDeviceSetManaged(dev, hostdev->managed);
- virPCIDeviceSetUsedBy(dev, drv_name, dom_name);
+ virPCIDeviceSetManaged(actual, hostdev->managed);
+ virPCIDeviceSetUsedBy(actual, drv_name, dom_name);
if (pcisrc->backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO)
- virPCIDeviceSetStubDriver(dev, VIR_PCI_STUB_DRIVER_VFIO);
+ virPCIDeviceSetStubDriver(actual, VIR_PCI_STUB_DRIVER_VFIO);
else if (pcisrc->backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN)
- virPCIDeviceSetStubDriver(dev, VIR_PCI_STUB_DRIVER_XEN);
+ virPCIDeviceSetStubDriver(actual, VIR_PCI_STUB_DRIVER_XEN);
else
- virPCIDeviceSetStubDriver(dev, VIR_PCI_STUB_DRIVER_KVM);
+ virPCIDeviceSetStubDriver(actual, VIR_PCI_STUB_DRIVER_KVM);
/* Setup the original states for the PCI device */
- virPCIDeviceSetUnbindFromStub(dev, hostdev->origstates.states.pci.unbind_from_stub);
- virPCIDeviceSetRemoveSlot(dev, hostdev->origstates.states.pci.remove_slot);
- virPCIDeviceSetReprobe(dev, hostdev->origstates.states.pci.reprobe);
+ virPCIDeviceSetUnbindFromStub(actual, hostdev->origstates.states.pci.unbind_from_stub);
+ virPCIDeviceSetRemoveSlot(actual, hostdev->origstates.states.pci.remove_slot);
+ virPCIDeviceSetReprobe(actual, hostdev->origstates.states.pci.reprobe);
- if (virPCIDeviceListAdd(mgr->activePCIHostdevs, dev) < 0)
+ if (virPCIDeviceListAdd(mgr->activePCIHostdevs, actual) < 0)
goto cleanup;
- dev = NULL;
+ actual = NULL;
}
ret = 0;
cleanup:
- virPCIDeviceFree(dev);
+ virPCIDeviceFree(actual);
virObjectUnlock(mgr->activePCIHostdevs);
virObjectUnlock(mgr->inactivePCIHostdevs);
return ret;
--
2.5.0
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list