Re: [FOR 1.3.0 PATCH] conf: add net device prefix for Xen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02/22/2016 11:15 PM, Joao Martins wrote:
> 
> 
> On 12/08/2015 04:06 PM, Jim Fehlig wrote:
>> Daniel P. Berrange wrote:
>>> On Mon, Dec 07, 2015 at 10:59:32PM -0700, Jim Fehlig wrote:
>>>> On 12/07/2015 11:52 AM, Daniel P. Berrange wrote:
>>>>> On Mon, Dec 07, 2015 at 09:42:21AM -0700, Jim Fehlig wrote:
>>>>>> In commit d2e5538b1, the libxl driver was changed to copy interface
>>>>>> names autogenerated by libxl to the corresponding network def in the
>>>>>> domain's virDomainDef object. The copied name is freed when the domain
>>>>>> transitions to the shutoff state. But when migrating a domain, the
>>>>>> autogenerated name is included in the XML sent to the destination host.
>>>>>> It is possible an interface with the same name already exists on the
>>>>>> destination host, causing migration to fail. Indeed the Xen project's
>>>>>> OSSTEST CI already encountered such a failure.
>>>>>>
>>>>>> This patch defines another VIR_NET_GENERATED_PREFIX for Xen, allowing
>>>>>> the autogenerated names to be excluded when parsing and formatting
>>>>>> inactive config.
>>>>>>
>>>>>> Signed-off-by: Jim Fehlig <jfehlig@xxxxxxxx>
>>>>>> ---
>>>>>>
>>>>>> This is an alternative approach to Joao's fix for this regression
>>>>>>
>>>>>> https://www.redhat.com/archives/libvir-list/2015-December/msg00197.html
>>>>>>
>>>>>> I think it is the same approach used by the qemu driver. My only
>>>>>> reservation is that it expands the potential for clashes with
>>>>>> user-defined names. I.e. with this change both 'vnet' and 'vif' are
>>>>>> reserved prefixes.
>>>>> Hmm, yes, tricky one.
>>>>>
>>>>> If we only care about XML parsing, then you could register a post
>>>>> parse callback instead to do this.
>>>> AFAIK, XML parsing is all that's in play here.
>>>>
>>>>> I'm not clear why we also have it in the virDomainNetDefFormat
>>>>> method - and we can't solve that with a post-parse callback.
>>>>>
>>>>>
>>>>> The other option would be to make the reserved prefix be a
>>>>> capability that the parser/formatter could read.
>>>> This seems like the best option, since a post-parse callback doesn't solve the
>>>> problem in virDomainNetDefFormat. It also has the upshot of making the prefix
>>>> visible and known to users. But I doubt such a change is suitable during 1.3.0
>>>> freeze.  With the freeze in mind, seems the best solution to the libxl migration
>>>> regression is revert d2e5538b1. It can be added again post-1.3.0 release, after
>>>> adding the prefix to capabilities.
>>>>
>>>> DV, since you may be making the release soon, feel free to revert d2e5538b1 if
>>>> you agree.
>>>
>>> Yeah, just go ahead & revert it Jim,  DV isn't doing the releae until
>>> tomorrow morning
>>
>> I've pushed the revert.
>>
>> Joao, sorry for yanking this for 1.3.0. We can get it in 1.3.1, after exposing
>> the prefix in capabilities.
>>
> Hey Jim,
> 
> I had the impression we had pushed this back in (i.e. cherry-picking d2e5538)
> but I was double checking and that's doesn't seem to be case. In adding support
> for the prefix in capabilities I found out one issue on the migration failure
> path leading to dereferencing a NULL pointer on the destination. If you agree
> could we squash the following chunk in addition to the cherry-pick of d2e5538:
> 
> diff --git a/src/libxl/libxl_domain.c b/src/libxl/libxl_domain.c
> index 63c5b24..f73bfb3 100644
> --- a/src/libxl/libxl_domain.c
> +++ b/src/libxl/libxl_domain.c
> @@ -768,7 +768,7 @@ libxlDomainCleanup(libxlDriverPrivatePtr driver,
>          for (i = 0; i < vm->def->nnets; i++) {
>              virDomainNetDefPtr net = vm->def->nets[i];
> 
> -            if (STRPREFIX(net->ifname, "vif"))
> +            if (net->ifname && STRPREFIX(net->ifname, "vif"))
>                  VIR_FREE(net->ifname);
>          }
>      }
> diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
> index 3f4457f..5479441 100644
> --- a/src/libxl/libxl_driver.c
> +++ b/src/libxl/libxl_driver.c
> @@ -5590,7 +5590,7 @@ static virHypervisorDriver libxlHypervisorDriver = {
>      .domainGetJobStats = libxlDomainGetJobStats, /* 1.3.1 */
>      .domainMemoryStats = libxlDomainMemoryStats, /* 1.3.0 */
>      .domainGetCPUStats = libxlDomainGetCPUStats, /* 1.3.0 */
> -    .domainInterfaceStats = libxlDomainInterfaceStats, /* 1.3.0 */
> +    .domainInterfaceStats = libxlDomainInterfaceStats, /* 1.3.2 */
>      .connectDomainEventRegister = libxlConnectDomainEventRegister, /* 0.9.0 */
>      .connectDomainEventDeregister = libxlConnectDomainEventDeregister, /* 0.9.0 */
>      .domainManagedSave = libxlDomainManagedSave, /* 0.9.2 */
> 
> 
> Or do you think it should be deferred to 1.3.3 ?
In case this is considered, please ignore the above chunk in my previous message.

The one below should be better since I introduced LIBXL_GENERATED_PREFIX_XEN on
a040ba9 which means no need to hardcode "vif".

Regards,
Joao

diff --git a/src/libxl/libxl_domain.c b/src/libxl/libxl_domain.c
index 63c5b24..8313c6e 100644
--- a/src/libxl/libxl_domain.c
+++ b/src/libxl/libxl_domain.c
@@ -768,7 +768,8 @@ libxlDomainCleanup(libxlDriverPrivatePtr driver,
         for (i = 0; i < vm->def->nnets; i++) {
             virDomainNetDefPtr net = vm->def->nets[i];

-            if (STRPREFIX(net->ifname, "vif"))
+            if (net->ifname &&
+                STRPREFIX(net->ifname, LIBXL_GENERATED_PREFIX_XEN))
                 VIR_FREE(net->ifname);
         }
     }
@@ -960,7 +961,8 @@ libxlDomainCreateIfaceNames(virDomainDefPtr def,
libxl_domain_config *d_config)
         if (net->ifname)
             continue;

-        ignore_value(virAsprintf(&net->ifname, "vif%d.%d%s",
+        ignore_value(virAsprintf(&net->ifname,
+                                 LIBXL_GENERATED_PREFIX_XEN "%d.%d%s",
                                  def->id, x_nic->devid, suffix));
     }
 }
diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
index 3f4457f..5479441 100644
--- a/src/libxl/libxl_driver.c
+++ b/src/libxl/libxl_driver.c
@@ -5590,7 +5590,7 @@ static virHypervisorDriver libxlHypervisorDriver = {
     .domainGetJobStats = libxlDomainGetJobStats, /* 1.3.1 */
     .domainMemoryStats = libxlDomainMemoryStats, /* 1.3.0 */
     .domainGetCPUStats = libxlDomainGetCPUStats, /* 1.3.0 */
-    .domainInterfaceStats = libxlDomainInterfaceStats, /* 1.3.0 */
+    .domainInterfaceStats = libxlDomainInterfaceStats, /* 1.3.2 */
     .connectDomainEventRegister = libxlConnectDomainEventRegister, /* 0.9.0 */
     .connectDomainEventDeregister = libxlConnectDomainEventDeregister, /* 0.9.0 */
     .domainManagedSave = libxlDomainManagedSave, /* 0.9.2 */


>> Regards,
>> Jim
>>
>> --
>> libvir-list mailing list
>> libvir-list@xxxxxxxxxx
>> https://www.redhat.com/mailman/listinfo/libvir-list
>>

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]