Re: [PATCH v3 1/3] libxl: add p2p migration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02/02/2016 11:41 PM, Jim Fehlig wrote:
> Joao Martins wrote:
>> Introduce support for VIR_MIGRATE_PEER2PEER in libvirt migration.
>> Most of the changes occur at the source and no modifications
>> at the receiver.
>>
>> In P2P mode there is only the Perform phase so we must handle
>> the connection with the destination and actually perform the
>> migration. libxlDomainPerformP2P implements the connection to
>> the destination and let libxlDoMigrateP2P implements the actual
>> migration logic with virConnectPtr. In this function we take
>> of doing all phases of migration in the destination similar to
>> virDomainMigrateVersion3Full. We appropriately save the last
>> error reported in each of the phases to provide proper
>> reporting. We don't yet support VIR_MIGRATE_TUNNELED yet and
>> we always use V3 with extensible params, thus it also makes the
>> implementation simpler.
>>
>> It is worth noting that the receiver didn't have any changes,
>> and since it's still the v3 sequence thus it is possible to
>> migrate from a P2P to non-P2P host.
>>
>> Signed-off-by: Joao Martins <joao.m.martins@xxxxxxxxxx>
>> ---
>> Changes since v2:
>>  - Remove Connect Close callback
>>
>> Changes since v1:
>>  - Move Begin step to libxlDoMigrateP2P to have all 4 steps
>>   together.
>>  - Remove if before VIR_FREE(dom_xml)
>> ---
>>  src/libxl/libxl_driver.c    |  13 ++-
>>  src/libxl/libxl_migration.c | 203 ++++++++++++++++++++++++++++++++++++++++++++
>>  src/libxl/libxl_migration.h |  11 +++
>>  3 files changed, 224 insertions(+), 3 deletions(-)
>>
>> diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
>> index d4e9c2a7..d34f843 100644
>> --- a/src/libxl/libxl_driver.c
>> +++ b/src/libxl/libxl_driver.c
>> @@ -4999,6 +4999,7 @@ libxlConnectSupportsFeature(virConnectPtr conn, int feature)
>>      switch (feature) {
>>      case VIR_DRV_FEATURE_TYPED_PARAM_STRING:
>>      case VIR_DRV_FEATURE_MIGRATION_PARAMS:
>> +    case VIR_DRV_FEATURE_MIGRATION_P2P:
>>          return 1;
>>      default:
>>          return 0;
>> @@ -5324,9 +5325,15 @@ libxlDomainMigratePerform3Params(virDomainPtr dom,
>>      if (virDomainMigratePerform3ParamsEnsureACL(dom->conn, vm->def) < 0)
>>          goto cleanup;
>>  
>> -    if (libxlDomainMigrationPerform(driver, vm, dom_xml, dconnuri,
>> -                                    uri, dname, flags) < 0)
>> -        goto cleanup;
>> +    if (flags & VIR_MIGRATE_PEER2PEER) {
>> +        if (libxlDomainMigrationPerformP2P(driver, vm, dom->conn, dom_xml,
>> +                                           dconnuri, uri, dname, flags) < 0)
>> +            goto cleanup;
>> +    } else {
>> +        if (libxlDomainMigrationPerform(driver, vm, dom_xml, dconnuri,
>> +                                        uri, dname, flags) < 0)
>> +            goto cleanup;
>> +    }
>>  
>>      ret = 0;
>>  
>> diff --git a/src/libxl/libxl_migration.c b/src/libxl/libxl_migration.c
>> index 0d23e5f..28445fc 100644
>> --- a/src/libxl/libxl_migration.c
>> +++ b/src/libxl/libxl_migration.c
>> @@ -42,6 +42,7 @@
>>  #include "libxl_conf.h"
>>  #include "libxl_migration.h"
>>  #include "locking/domain_lock.h"
>> +#include "virtypedparam.h"
>>  
>>  #define VIR_FROM_THIS VIR_FROM_LIBXL
>>  
>> @@ -456,6 +457,208 @@ libxlDomainMigrationPrepare(virConnectPtr dconn,
>>      return ret;
>>  }
>>  
>> +/* This function is a simplification of virDomainMigrateVersion3Full
>> + * excluding tunnel support and restricting it to migration v3
>> + * with params since it was the first to be introduced in libxl.
>> + */
>> +static int
>> +libxlDoMigrateP2P(libxlDriverPrivatePtr driver,
>> +                  virDomainObjPtr vm,
>> +                  virConnectPtr sconn,
>> +                  const char *xmlin,
>> +                  virConnectPtr dconn,
>> +                  const char *dconnuri ATTRIBUTE_UNUSED,
>> +                  const char *dname,
>> +                  const char *uri,
>> +                  unsigned int flags)
>> +{
>> +    virDomainPtr ddomain = NULL;
>> +    virTypedParameterPtr params = NULL;
>> +    int nparams = 0;
>> +    int maxparams = 0;
>> +    char *uri_out = NULL;
>> +    char *dom_xml = NULL;
>> +    unsigned long destflags;
>> +    bool cancelled = true;
>> +    virErrorPtr orig_err = NULL;
>> +    int ret = -1;
>> +
>> +    dom_xml = libxlDomainMigrationBegin(sconn, vm, xmlin);
>> +    if (!dom_xml)
>> +        goto cleanup;
>> +
>> +    if (virTypedParamsAddString(&params, &nparams, &maxparams,
>> +                                VIR_MIGRATE_PARAM_DEST_XML, dom_xml) < 0)
>> +        goto cleanup;
>> +
>> +    if (dname &&
>> +        virTypedParamsAddString(&params, &nparams, &maxparams,
>> +                                VIR_MIGRATE_PARAM_DEST_NAME, dname) < 0)
>> +        goto cleanup;
>> +
>> +    if (uri &&
>> +        virTypedParamsAddString(&params, &nparams, &maxparams,
>> +                                VIR_MIGRATE_PARAM_URI, uri) < 0)
>> +        goto cleanup;
>> +
>> +    /* We don't require the destination to have P2P support
>> +     * as it looks to be normal migration from the receiver perpective.
>> +     */
>> +    destflags = flags & ~(VIR_MIGRATE_PEER2PEER);
>> +
>> +    VIR_DEBUG("Prepare3");
>> +    virObjectUnlock(vm);
>> +    ret = dconn->driver->domainMigratePrepare3Params
>> +        (dconn, params, nparams, NULL, 0, NULL, NULL, &uri_out, destflags);
>> +    virObjectLock(vm);
>> +
>> +    if (ret == -1)
>> +        goto cleanup;
>> +
>> +    if (uri_out) {
>> +        if (virTypedParamsReplaceString(&params, &nparams,
>> +                                        VIR_MIGRATE_PARAM_URI, uri_out) < 0) {
>> +            orig_err = virSaveLastError();
>> +            goto finish;
>> +        }
>> +    } else {
>> +        virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
>> +                       _("domainMigratePrepare3 did not set uri"));
>> +        goto finish;
>> +    }
>> +
>> +    VIR_DEBUG("Perform3 uri=%s", NULLSTR(uri_out));
>> +    ret = libxlDomainMigrationPerform(driver, vm, NULL, NULL,
>> +                                      uri_out, NULL, flags);
>> +
>> +    if (ret < 0)
>> +        orig_err = virSaveLastError();
>> +
>> +    cancelled = (ret < 0);
>> +
>> + finish:
>> +    VIR_DEBUG("Finish3 ret=%d", ret);
>> +    if (virTypedParamsGetString(params, nparams,
>> +                                VIR_MIGRATE_PARAM_DEST_NAME, NULL) <= 0 &&
>> +        virTypedParamsReplaceString(&params, &nparams,
>> +                                    VIR_MIGRATE_PARAM_DEST_NAME,
>> +                                    vm->def->name) < 0) {
>> +        ddomain = NULL;
>> +    } else {
>> +        virObjectUnlock(vm);
>> +        ddomain = dconn->driver->domainMigrateFinish3Params
>> +            (dconn, params, nparams, NULL, 0, NULL, NULL,
>> +             destflags, cancelled);
>> +        virObjectLock(vm);
>> +    }
>> +
>> +    cancelled = (ddomain == NULL);
>> +
>> +    /* If Finish3Params set an error, and we don't have an earlier
>> +     * one we need to preserve it in case confirm3 overwrites
>> +     */
>> +    if (!orig_err)
>> +        orig_err = virSaveLastError();
>> +
>> +    VIR_DEBUG("Confirm3 cancelled=%d vm=%p", cancelled, vm);
>> +    ret = libxlDomainMigrationConfirm(driver, vm, flags, cancelled);
>> +
>> +    if (ret < 0)
>> +        VIR_WARN("Guest %s probably left in 'paused' state on source",
>> +                 vm->def->name);
>> +
>> + cleanup:
>> +    if (ddomain) {
>> +        virObjectUnref(ddomain);
>> +        ret = 0;
>> +    } else {
>> +        ret = -1;
>> +    }
>> +
>> +    if (orig_err) {
>> +        virSetError(orig_err);
>> +        virFreeError(orig_err);
>> +    }
>> +
>> +    VIR_FREE(dom_xml);
>> +    VIR_FREE(uri_out);
>> +    virTypedParamsFree(params, nparams);
>> +    return ret;
>> +}
>> +
>> +static int virConnectCredType[] = {
>> +    VIR_CRED_AUTHNAME,
>> +    VIR_CRED_PASSPHRASE,
>> +};
>> +
>> +static virConnectAuth virConnectAuthConfig = {
>> +    .credtype = virConnectCredType,
>> +    .ncredtype = ARRAY_CARDINALITY(virConnectCredType),
>> +};
>> +
>> +/* On P2P mode there is only the Perform3 phase and we need to handle
>> + * the connection with the destination libvirtd and perform the migration.
>> + * Here we first tackle the first part of it, and libxlDoMigrationP2P handles
>> + * the migration process with an established virConnectPtr to the destination.
>> + */
>> +int
>> +libxlDomainMigrationPerformP2P(libxlDriverPrivatePtr driver,
>> +                               virDomainObjPtr vm,
>> +                               virConnectPtr sconn,
>> +                               const char *xmlin,
>> +                               const char *dconnuri,
>> +                               const char *uri_str ATTRIBUTE_UNUSED,
>> +                               const char *dname,
>> +                               unsigned int flags)
>> +{
>> +    int ret = -1;
>> +    int keepAliveInterval = 5;
>> +    int keepAliveCount = 5;
>> +    bool useParams;
>> +    virConnectPtr dconn = NULL;
>> +    virErrorPtr orig_err = NULL;
>> +
>> +    virObjectUnlock(vm);
>> +    dconn = virConnectOpenAuth(dconnuri, &virConnectAuthConfig, 0);
>> +    virObjectLock(vm);
>> +
>> +    if (dconn == NULL) {
>> +        virReportError(VIR_ERR_OPERATION_FAILED,
>> +                       _("Failed to connect to remote libvirt URI %s: %s"),
>> +                       dconnuri, virGetLastErrorMessage());
>> +        return ret;
>> +    }
>> +
>> +    if (virConnectSetKeepAlive(dconn, keepAliveInterval,
>> +                               keepAliveCount) < 0)
> 
> I knew there was something I forgot to mention yesterday when reviewing this
> patch...
> 
> Since you set keepalive on the destination connection, should we also make the
> interval and count configurable like Jirka did for the qemu P2P migration with
> commit 1e626437?

Good idea, will do it for v4.

> Also, if the connection dies, how are we informed about that?
> Would that be done via the connect close callback that was removed in this
> version? It is not clear to me how errors on the dconn connection are handled.
> 
In the close callback, we're just notified that the connection got closed, but I
am not sure if there is much we can do about it in the handler.
We could set an error on the callback, and then check dconn callers on
libxlDoMigrateP2P() before any RPC calls?

Regards,
Joao

> Regards,
> Jim
> 
> 
>> +        goto cleanup;
>> +
>> +    virObjectUnlock(vm);
>> +    useParams = VIR_DRV_SUPPORTS_FEATURE(dconn->driver, dconn,
>> +                                         VIR_DRV_FEATURE_MIGRATION_PARAMS);
>> +    virObjectLock(vm);
>> +
>> +    if (!useParams) {
>> +        virReportError(VIR_ERR_OPERATION_FAILED, "%s",
>> +                       _("Destination libvirt does not support migration with extensible parameters"));
>> +        goto cleanup;
>> +    }
>> +
>> +    ret = libxlDoMigrateP2P(driver, vm, sconn, xmlin, dconn, dconnuri,
>> +                            dname, uri_str, flags);
>> +
>> + cleanup:
>> +    orig_err = virSaveLastError();
>> +    virObjectUnlock(vm);
>> +    virObjectUnref(dconn);
>> +    virObjectLock(vm);
>> +    if (orig_err) {
>> +        virSetError(orig_err);
>> +        virFreeError(orig_err);
>> +    }
>> +    return ret;
>> +}
>> +
>>  int
>>  libxlDomainMigrationPerform(libxlDriverPrivatePtr driver,
>>                              virDomainObjPtr vm,
>> diff --git a/src/libxl/libxl_migration.h b/src/libxl/libxl_migration.h
>> index 20b45d8..0f83bb4 100644
>> --- a/src/libxl/libxl_migration.h
>> +++ b/src/libxl/libxl_migration.h
>> @@ -28,6 +28,7 @@
>>  
>>  # define LIBXL_MIGRATION_FLAGS                  \
>>      (VIR_MIGRATE_LIVE |                         \
>> +     VIR_MIGRATE_PEER2PEER |                    \
>>       VIR_MIGRATE_UNDEFINE_SOURCE |              \
>>       VIR_MIGRATE_PAUSED)
>>  
>> @@ -56,6 +57,16 @@ libxlDomainMigrationPrepare(virConnectPtr dconn,
>>                              unsigned int flags);
>>  
>>  int
>> +libxlDomainMigrationPerformP2P(libxlDriverPrivatePtr driver,
>> +                               virDomainObjPtr vm,
>> +                               virConnectPtr sconn,
>> +                               const char *dom_xml,
>> +                               const char *dconnuri,
>> +                               const char *uri_str,
>> +                               const char *dname,
>> +                               unsigned int flags);
>> +
>> +int
>>  libxlDomainMigrationPerform(libxlDriverPrivatePtr driver,
>>                              virDomainObjPtr vm,
>>                              const char *dom_xml,
> 

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]