On Wed, 2015-11-11 at 10:11 +0300, Nikolay Shirokovskiy wrote:
> Implement functions for vz containers only. vz VMs memory
> managment thru libvirt yet to be designed.
>
> vz memory management for containers is rather different from other
> drivers.
>
> 1. Whole bunch of memory settings functions change both cur_balloon and
> maximum
> memory to the same value. The reason is that active container memory
> settings is not limited by memory set at container startup as in virtual
> machine case. Thus there is no real need in 2 parameters and this patch takes
> an effort to map this situation to an existent interface.
>
> 2. virDomainSetMemory semantics is extended.
> Current documentation states that this function changes memory only for
> a current domain. At the same time virsh documentation states that behaviour
> of
> 'setmem' without flags (that eventually calls virDomainSetMemory) is
> hypervisor
> specific. I think we can extend sematics of the function to the defined in
> virsh. First this is already done for virDomainSetMaxMemory, second it would
> be
> convinient for vz driver. With current semantics virDomainSetMemory can't be
> implemented as vz always set persistent state if live state is set. With
> extended semantics function just holds the vz driver behaviour and
> we can use 'setmem' without flags to change domain memory.
>
> 3. VIR_DOMAIN_MEM_CURRENT is not supported.
> There are 2 reasons. First is to be consistent with vzDomainAttachDeviceFlags
> and vzDomainDetachDeviceFlags. Second is that this flag has no good
> correllation with vz behaviour. I'm not sure what use case of this flag is,
> I suppose it is to call the function without inquiring the current state of
> domain so you will not fail because of incorrect flags combination. But with
> vz
> this behaviour is impossible. The function will fail if domain is in active
> state and you specify this flag as you can't change running domain config
> only.
>
> Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx>
> ---
> src/libvirt-domain.c | 5 ++-
> src/vz/vz_driver.c | 81
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> src/vz/vz_sdk.c | 23 ++++++++++++++
> src/vz/vz_sdk.h | 1 +
> 4 files changed, 108 insertions(+), 2 deletions(-)
>
> diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c
> index de7eb04..56ab907 100644
> --- a/src/libvirt-domain.c
> +++ b/src/libvirt-domain.c
> @@ -1882,8 +1882,9 @@ virDomainSetMaxMemory(virDomainPtr domain, unsigned long
> memory)
> * to Domain0 i.e. the domain where the application runs.
> * This function may require privileged access to the hypervisor.
> *
> - * This command only changes the runtime configuration of the domain,
> - * so can only be called on an active domain.
> + * This command is hypervisor-specific for whether active, persistent,
> + * or both configurations are changed; for more control, use
> + * virDomainSetMemoryFlags().
> *
> * Returns 0 in case of success and -1 in case of failure.
> */
I think it worth to send this part as a separate patch
> diff --git a/src/vz/vz_driver.c b/src/vz/vz_driver.c
> index 6f1cbfb..7a4d431 100644
> --- a/src/vz/vz_driver.c
> +++ b/src/vz/vz_driver.c
> @@ -1438,6 +1438,84 @@ vzNodeGetFreeMemory(virConnectPtr conn
> ATTRIBUTE_UNUSED)
> return freeMem;
> }
>
> +static int vzDomainSetMemoryDefault(virDomainObjPtr dom, unsigned long
> memory)
> +{
> + if (!IS_CT(dom->def)) {
> + virReportError(VIR_ERR_ARGUMENT_UNSUPPORTED, "%s",
> + _("Can't change memory size for vz VM"));
> + return -1;
> + }
> +
> + if (prlsdkSetMemsize(dom, memory >> 10) < 0)
> + return -1;
> +
> + virDomainDefSetMemoryInitial(dom->def, memory);
> + dom->def->mem.cur_balloon = memory;
> +
> + return 0;
> +}
> +
> +static int vzDomainSetMemoryFlags(virDomainPtr domain, unsigned long memory,
> + unsigned int flags)
> +{
> + virDomainObjPtr dom = NULL;
> + int ret = -1;
> +
> + virCheckFlags(VIR_DOMAIN_AFFECT_LIVE |
> + VIR_DOMAIN_AFFECT_CONFIG |
> + VIR_DOMAIN_MEM_MAXIMUM, -1);
> +
> + if (!(dom = vzDomObjFromDomain(domain)))
> + return -1;
> +
> + if (!(flags & VIR_DOMAIN_AFFECT_CONFIG)) {
> + virReportError(VIR_ERR_OPERATION_INVALID, "%s",
> + _("domain config update needs VIR_DOMAIN_AFFECT_CONFIG
> "
> + "flag to be set"));
> + goto cleanup;
> + }
> +
> + if (!virDomainObjIsActive(dom) && (flags & VIR_DOMAIN_AFFECT_LIVE)) {
> + virReportError(VIR_ERR_OPERATION_INVALID, "%s",
> + _("cannot do live update domain config on "
> + "inactive domain"));
> + goto cleanup;
> + }
> +
> + if (virDomainObjIsActive(dom) && !(flags & VIR_DOMAIN_AFFECT_LIVE)) {
> + virReportError(VIR_ERR_OPERATION_INVALID, "%s",
> + _("updates on a running domain need "
> + "VIR_DOMAIN_AFFECT_LIVE flag"));
> + goto cleanup;
> + }
> +
> + ret = vzDomainSetMemoryDefault(dom, memory);
> +
> + cleanup:
> +
> + virObjectUnlock(dom);
> + return ret;
> +}
> +
> +static int vzDomainSetMemory(virDomainPtr domain, unsigned long memory)
> +{
> + virDomainObjPtr dom = NULL;
> + int ret = -1;
> +
> + if (!(dom = vzDomObjFromDomain(domain)))
> + return -1;
> +
> + ret = vzDomainSetMemoryDefault(dom, memory);
> +
> + virObjectUnlock(dom);
> + return ret;
> +}
> +
> +static int vzDomainSetMaxMemory(virDomainPtr domain, unsigned long memory)
> +{
> + return vzDomainSetMemory(domain, memory);
> +}
> +
> static virHypervisorDriver vzDriver = {
> .name = "vz",
> .connectOpen = vzConnectOpen, /* 0.10.0 */
> @@ -1499,6 +1577,9 @@ static virHypervisorDriver vzDriver = {
> .domainBlockStatsFlags = vzDomainBlockStatsFlags, /* 1.2.17 */
> .domainInterfaceStats = vzDomainInterfaceStats, /* 1.2.17 */
> .domainMemoryStats = vzDomainMemoryStats, /* 1.2.17 */
> + .domainSetMemoryFlags = vzDomainSetMemoryFlags, /* 1.2.21 */
> + .domainSetMemory = vzDomainSetMemory, /* 1.2.21 */
> + .domainSetMaxMemory = vzDomainSetMaxMemory, /* 1.2.21 */
> };
>
> static virConnectDriver vzConnectDriver = {
> diff --git a/src/vz/vz_sdk.c b/src/vz/vz_sdk.c
> index 89c9e89..2d0f688 100644
> --- a/src/vz/vz_sdk.c
> +++ b/src/vz/vz_sdk.c
> @@ -4036,3 +4036,26 @@ prlsdkGetMemoryStats(virDomainObjPtr dom,
>
> return ret;
> }
> +
> +int prlsdkSetMemsize(virDomainObjPtr dom, unsigned int memsize)
> +{
> + int ret = -1;
> + vzDomObjPtr privdom = dom->privateData;
> + PRL_HANDLE job = PRL_INVALID_HANDLE;
> + PRL_RESULT pret;
> +
> + job = PrlVm_BeginEdit(privdom->sdkdom);
> + if (PRL_FAILED(waitJob(job)))
> + goto out;
> +
> + pret = PrlVmCfg_SetRamSize(privdom->sdkdom, memsize);
> + prlsdkCheckRetGoto(pret, out);
> +
> + job = PrlVm_CommitEx(privdom->sdkdom, PVCF_DETACH_HDD_BUNDLE);
> + if (PRL_FAILED(waitJob(job)))
> + goto out;
> +
> + ret = 0;
> + out:
> + return ret;
> +}
> diff --git a/src/vz/vz_sdk.h b/src/vz/vz_sdk.h
> index ebe4591..88fef4a 100644
> --- a/src/vz/vz_sdk.h
> +++ b/src/vz/vz_sdk.h
> @@ -76,3 +76,4 @@ int
> prlsdkGetVcpuStats(virDomainObjPtr dom, int idx, unsigned long long *time);
> int
> prlsdkGetMemoryStats(virDomainObjPtr dom, virDomainMemoryStatPtr stats,
> unsigned int nr_stats);
> +int prlsdkSetMemsize(virDomainObjPtr dom, unsigned int memsize);
--
Dmitry Guryanov
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list