While parsing device addresses we should use correct base and don't
count on auto-detect. For example, PCI address uses hex numbers, but
each number starting with 0 will be auto-detected as octal number and
that's wrong. Another wrong use-case is for PCI address if for example
bus is 10, than it's incorrectly parsed as decimal number.
PCI and CCW addresses have all values as hex numbers, IDE and SCSI
addresses are in decimal numbers.
Signed-off-by: Pavel Hrdina <phrdina@xxxxxxxxxx>
---
tools/virsh-domain.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index 4191548..e8503ec 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -455,19 +455,19 @@ static int str2PCIAddress(const char *str, struct PCIAddress *pciAddr)
domain = (char *)str;
- if (virStrToLong_ui(domain, &bus, 0, &pciAddr->domain) != 0)
+ if (virStrToLong_ui(domain, &bus, 16, &pciAddr->domain) != 0)
return -1;
bus++;
- if (virStrToLong_ui(bus, &slot, 0, &pciAddr->bus) != 0)
+ if (virStrToLong_ui(bus, &slot, 16, &pciAddr->bus) != 0)
return -1;
slot++;
- if (virStrToLong_ui(slot, &function, 0, &pciAddr->slot) != 0)
+ if (virStrToLong_ui(slot, &function, 16, &pciAddr->slot) != 0)
return -1;
function++;
- if (virStrToLong_ui(function, NULL, 0, &pciAddr->function) != 0)
+ if (virStrToLong_ui(function, NULL, 16, &pciAddr->function) != 0)
return -1;
return 0;
@@ -484,15 +484,15 @@ static int str2SCSIAddress(const char *str, struct SCSIAddress *scsiAddr)
controller = (char *)str;
- if (virStrToLong_uip(controller, &bus, 0, &scsiAddr->controller) != 0)
+ if (virStrToLong_uip(controller, &bus, 10, &scsiAddr->controller) != 0)
return -1;
bus++;
- if (virStrToLong_uip(bus, &unit, 0, &scsiAddr->bus) != 0)
+ if (virStrToLong_uip(bus, &unit, 10, &scsiAddr->bus) != 0)
return -1;
unit++;
- if (virStrToLong_ullp(unit, NULL, 0, &scsiAddr->unit) != 0)
+ if (virStrToLong_ullp(unit, NULL, 10, &scsiAddr->unit) != 0)
return -1;
return 0;
@@ -509,15 +509,15 @@ static int str2IDEAddress(const char *str, struct IDEAddress *ideAddr)
controller = (char *)str;
- if (virStrToLong_ui(controller, &bus, 0, &ideAddr->controller) != 0)
+ if (virStrToLong_ui(controller, &bus, 10, &ideAddr->controller) != 0)
return -1;
bus++;
- if (virStrToLong_ui(bus, &unit, 0, &ideAddr->bus) != 0)
+ if (virStrToLong_ui(bus, &unit, 10, &ideAddr->bus) != 0)
return -1;
unit++;
- if (virStrToLong_ui(unit, NULL, 0, &ideAddr->unit) != 0)
+ if (virStrToLong_ui(unit, NULL, 10, &ideAddr->unit) != 0)
return -1;
return 0;
@@ -534,15 +534,15 @@ static int str2CCWAddress(const char *str, struct CCWAddress *ccwAddr)
cssid = (char *)str;
- if (virStrToLong_ui(cssid, &ssid, 0, &ccwAddr->cssid) != 0)
+ if (virStrToLong_ui(cssid, &ssid, 16, &ccwAddr->cssid) != 0)
return -1;
ssid++;
- if (virStrToLong_ui(ssid, &devno, 0, &ccwAddr->ssid) != 0)
+ if (virStrToLong_ui(ssid, &devno, 16, &ccwAddr->ssid) != 0)
return -1;
devno++;
- if (virStrToLong_ui(devno, NULL, 0, &ccwAddr->devno) != 0)
+ if (virStrToLong_ui(devno, NULL, 16, &ccwAddr->devno) != 0)
return -1;
return 0;
@@ -739,8 +739,8 @@ cmdAttachDisk(vshControl *ctl, const vshCmd *cmd)
} else if (STRPREFIX((const char *)target, "hd")) {
if (diskAddr.type == DISK_ADDR_TYPE_IDE) {
virBufferAsprintf(&buf,
- "<address type='drive' controller='%d'"
- " bus='%d' unit='%d' />\n",
+ "<address type='drive' controller='%u'"
+ " bus='%u' unit='%u' />\n",
diskAddr.addr.ide.controller, diskAddr.addr.ide.bus,
diskAddr.addr.ide.unit);
} else {
--
2.6.2
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list