This controller can be connected only to a port on a
pcie-switch-upstream-port. It provides a single hotpluggable port that
will accept any PCI or PCIe device, as well as any device requiring a
pcie-*-port (the only current example of such a device is the
pcie-switch-upstream-port).
---
V2:
* change test case to reflect additional pcie-root-port between
pcie-root and pcie-switch-upstream-port and add a 2nd switch that is
connected to a downstream port of the 1st switch.
docs/formatdomain.html.in | 51 ++++++++++++++--------
docs/schemas/domaincommon.rng | 3 ++
src/conf/domain_addr.c | 11 +++++
src/conf/domain_conf.c | 3 +-
src/conf/domain_conf.h | 1 +
src/qemu/qemu_command.c | 1 +
.../qemuxml2argv-pcie-switch-downstream-port.xml | 44 +++++++++++++++++++
tests/qemuxml2xmltest.c | 1 +
8 files changed, 95 insertions(+), 20 deletions(-)
create mode 100644 tests/qemuxml2argvdata/qemuxml2argv-pcie-switch-downstream-port.xml
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index eb5b9b7..c2023d0 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -3025,11 +3025,12 @@
PCI controllers have an optional <code>model</code> attribute with
possible values <code>pci-root</code>, <code>pcie-root</code>,
<code>pcie-root-port</code>, <code>pci-bridge</code>,
- <code>dmi-to-pci-bridge</code>, or <code>pcie-switch-upstream-port</code>.
+ <code>dmi-to-pci-bridge</code>, <code>pcie-switch-upstream-port</code>, or
+ <code>pcie-switch-downstream-port</code>.
(pci-root and pci-bridge <span class="since">since 1.0.5</span>,
pcie-root and dmi-to-pci-bridge <span class="since">since
- 1.1.2</span>, pcie-root-port and
- pcie-switch-upstream-port <span class="since">since 1.3.0</span>)
+ 1.1.2</span>, pcie-root-port, pcie-switch-upstream-port, and
+ pcie-switch-downstream-port <span class="since">since 1.3.0</span>)
The root controllers (<code>pci-root</code> and <code>pcie-root</code>)
have an optional <code>pcihole64</code> element specifying how big
(in kilobytes, or in the unit specified by <code>pcihole64</code>'s
@@ -3074,8 +3075,8 @@
</dd>
<dt><code>chassis</code></dt>
<dd>
- pcie-root-port controllers can also have
- a <code>chassis</code> attribute in
+ pcie-root-port and pcie-switch-downstream-port controllers can
+ also have a <code>chassis</code> attribute in
the <code><model></code> subelement, which is used to
control QEMU's "chassis" option for the device (normally
libvirt automatically sets this to the same value as the index
@@ -3083,13 +3084,13 @@
</dd>
<dt><code>port</code></dt>
<dd>
- pcie-root-port controllers can also have a <code>port</code>
- attribute in the <code><model></code> subelement, which
- is used to control QEMU's "port" option for the device
- (normally libvirt automatically sets this based on the PCI
- address where the root port is connected using the formula
- (slot << 3) + function (although this could change in
- the future).
+ pcie-root-port and pcie-switch-downstream-port controllers can
+ also have a <code>port</code> attribute in
+ the <code><model></code> subelement, which is used to
+ control QEMU's "port" option for the device (normally libvirt
+ automatically sets this based on the PCI address where the
+ root port is connected using the formula (slot << 3) +
+ function (although this could change in the future).
</dd>
</dl>
<p>
@@ -3139,14 +3140,26 @@
</p>
<p>
Domains with an implicit pcie-root can also add controllers
- with <code>model='pcie-root-port'</code>. This is a simple type of
- bridge device that can connect only to one of the 31 slots on
- the pcie-root bus on its upstream side, and makes a single
- (PCIe, hotpluggable) port (at slot='0') available on the
- downstream side. This controller can be used to provide a single
- slot to later hotplug a PCIe device (but is not itself
+ with <code>model='pcie-root-port'</code>,
+ <code>model='pcie-switch-upstream-port'</code>,
+ and <code>model='pcie-switch-downstream-port'</code>. pcie-root-port
+ is a simple type of bridge device that can connect only to one
+ of the 31 slots on the pcie-root bus on its upstream side, and
+ makes a single (PCIe, hotpluggable) port (at slot='0') available
+ on the downstream side. This controller can be used to provide a
+ single slot to later hotplug a PCIe device (but is not itself
hotpluggable - it must be in the configuration when the domain
- is started). (<span class="since">since 1.3.0</span>)
+ is started). pcie-switch-upstream-port is a more flexible (but
+ also more complex) device that can only plug into a
+ pcie-root-port or pcie-switch-downstream-port on the upstream
+ side, and provides 32 ports on the downstream side (slot='0' -
+ slot='31') that accept only pcie-switch-downstream-port devices;
+ each pcie-switch-downstream-port device can only plug into a
+ pcie-switch-upstream-port on its upstream side, and on its
+ downstream side provides a single hotpluggable pcie port that
+ can accept any standard pci or pcie device (or another
+ pcie-switch-upstream-port). (<span class="since">since
+ 1.3.0</span>)
</p>
<pre>
...
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
index 8b2f29c..f465ec4 100644
--- a/docs/schemas/domaincommon.rng
+++ b/docs/schemas/domaincommon.rng
@@ -1743,6 +1743,8 @@
<value>ioh3420</value>
<!-- implementations of 'pcie-switch-upstream-port' -->
<value>x3130-upstream</value>
+ <!-- implementations of 'pcie-switch-downstream-port' -->
+ <value>xio3130-downstream</value>
</choice>
</attribute>
<empty/>
@@ -1790,6 +1792,7 @@
<value>dmi-to-pci-bridge</value>
<value>pcie-root-port</value>
<value>pcie-switch-upstream-port</value>
+ <value>pcie-switch-downstream-port</value>
</choice>
</attribute>
</group>
diff --git a/src/conf/domain_addr.c b/src/conf/domain_addr.c
index e40a66c..40ee659 100644
--- a/src/conf/domain_addr.c
+++ b/src/conf/domain_addr.c
@@ -213,6 +213,17 @@ virDomainPCIAddressBusSetModel(virDomainPCIAddressBusPtr bus,
bus->minSlot = 0;
bus->maxSlot = 31;
break;
+ case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT:
+ /* provides one slot which is pcie, can be used by devices
+ * that must connect to some type of "pcie-*-port", and
+ * is hotpluggable
+ */
+ bus->flags = VIR_PCI_CONNECT_TYPE_PCIE
+ | VIR_PCI_CONNECT_TYPE_PCIE_PORT
+ | VIR_PCI_CONNECT_HOTPLUGGABLE;
+ bus->minSlot = 0;
+ bus->maxSlot = 0;
+ break;
default:
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Invalid PCI controller model %d"), model);
diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
index 4eeaa84..adf0af4 100644
--- a/src/conf/domain_conf.c
+++ b/src/conf/domain_conf.c
@@ -326,7 +326,8 @@ VIR_ENUM_IMPL(virDomainControllerModelPCI, VIR_DOMAIN_CONTROLLER_MODEL_PCI_LAST,
"pci-bridge",
"dmi-to-pci-bridge",
"pcie-root-port",
- "pcie-switch-upstream-port")
+ "pcie-switch-upstream-port",
+ "pcie-switch-downstream-port")
VIR_ENUM_IMPL(virDomainControllerModelSCSI, VIR_DOMAIN_CONTROLLER_MODEL_SCSI_LAST,
"auto",
diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h
index b49c803..94b71bc 100644
--- a/src/conf/domain_conf.h
+++ b/src/conf/domain_conf.h
@@ -754,6 +754,7 @@ typedef enum {
VIR_DOMAIN_CONTROLLER_MODEL_DMI_TO_PCI_BRIDGE,
VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT_PORT,
VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_UPSTREAM_PORT,
+ VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT,
VIR_DOMAIN_CONTROLLER_MODEL_PCI_LAST
} virDomainControllerModelPCI;
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 30f54ce..e3f0663 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -2291,6 +2291,7 @@ qemuDomainAssignPCIAddresses(virDomainDefPtr def,
if (!options->type)
deviceName = "x3130-upstream";
break;
+ case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT:
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT:
case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT:
case VIR_DOMAIN_CONTROLLER_MODEL_PCI_LAST:
diff --git a/tests/qemuxml2argvdata/qemuxml2argv-pcie-switch-downstream-port.xml b/tests/qemuxml2argvdata/qemuxml2argv-pcie-switch-downstream-port.xml
new file mode 100644
index 0000000..ab32d44
--- /dev/null
+++ b/tests/qemuxml2argvdata/qemuxml2argv-pcie-switch-downstream-port.xml
@@ -0,0 +1,44 @@
+<domain type='qemu'>
+ <name>q35-test</name>
+ <uuid>11dbdcdd-4c3b-482b-8903-9bdb8c0a2774</uuid>
+ <memory unit='KiB'>2097152</memory>
+ <currentMemory unit='KiB'>2097152</currentMemory>
+ <vcpu placement='static' cpuset='0-1'>2</vcpu>
+ <os>
+ <type arch='x86_64' machine='q35'>hvm</type>
+ <boot dev='hd'/>
+ </os>
+ <clock offset='utc'/>
+ <on_poweroff>destroy</on_poweroff>
+ <on_reboot>restart</on_reboot>
+ <on_crash>destroy</on_crash>
+ <devices>
+ <emulator>/usr/libexec/qemu-kvm</emulator>
+ <disk type='block' device='disk'>
+ <source dev='/dev/HostVG/QEMUGuest1'/>
+ <target dev='sda' bus='sata'/>
+ <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+ </disk>
+ <controller type='pci' index='0' model='pcie-root'/>
+ <controller type='pci' index='1' model='dmi-to-pci-bridge'/>
+ <controller type='pci' index='2' model='pci-bridge'/>
+ <controller type='pci' index='3' model='pcie-root-port'/>
+ <controller type='pci' index='4' model='pcie-switch-upstream-port'/>
+ <controller type='pci' index='5' model='pcie-switch-downstream-port'/>
+ <controller type='pci' index='6' model='pcie-switch-downstream-port'/>
+ <controller type='pci' index='7' model='pcie-switch-downstream-port'/>
+ <controller type='pci' index='8' model='pcie-switch-downstream-port'>
+ <model type='xio3130-downstream'/>
+ <target chassis='30' port='0x27'/>
+ </controller>
+ <controller type='pci' index='9' model='pcie-switch-upstream-port'/>
+ <controller type='pci' index='10' model='pcie-switch-downstream-port'/>
+ <controller type='pci' index='11' model='pcie-switch-downstream-port'/>
+ <controller type='pci' index='12' model='pcie-switch-downstream-port'/>
+ <controller type='sata' index='0'/>
+ <video>
+ <model type='qxl' ram='65536' vram='32768' vgamem='8192' heads='1'/>
+ </video>
+ <memballoon model='none'/>
+ </devices>
+</domain>
diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c
index 80686ae..d5a565f 100644
--- a/tests/qemuxml2xmltest.c
+++ b/tests/qemuxml2xmltest.c
@@ -569,6 +569,7 @@ mymain(void)
DO_TEST_DIFFERENT("q35");
DO_TEST("pcie-root-port");
DO_TEST("pcie-switch-upstream-port");
+ DO_TEST("pcie-switch-downstream-port");
DO_TEST("hostdev-scsi-lsi");
DO_TEST("hostdev-scsi-virtio-scsi");
--
2.1.0
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list