On 06/18/2015 02:38 PM, John Ferlan wrote:
On 06/16/2015 11:29 PM, Eric Farman wrote:Defining a domain with a SCSI disk attached via a hostdev tag and a source address unit value longer than two digits causes an error when editing the domain with virsh edit, even if no changes are made to the domain definition. The error suggests invalid XML, somewhere: # virsh edit lmb_guest error: XML document failed to validate against schema: Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng Extra element devices in interleave Element domain failed to validate content The virt-xml-validate tool fails with a similar error: # virt-xml-validate lmb_guest.xml Relax-NG validity error : Extra element devices in interleave lmb_guest.xml:17: element devices: Relax-NG validity error : Element domain failed to validate content lmb_guest.xml fails to validate The hostdev tag requires a source address to be specified, which includes bus, target, and unit address attributes. According to the SCSI Architecture Model spec (section 4.9 of SAM-2), a LUN address is 64 bits and thus could be up to 20 decimal digits long. Unfortunately, the XML schema limits this string to just two digits. Similarly, the target field can be up to 32 bits in length, which would be 10 decimal digits. # lsscsi -xx [0:0:19:0x4022401100000000] disk IBM 2107900 3.44 /dev/sda # lsscsi [0:0:19:1074872354]disk IBM 2107900 3.44 /dev/sda # cat lmb_guest.xml <domain type='kvm'> <name>lmb_guest</name> <memory unit='MiB'>1024</memory> ...trimmed... <devices> <controller type='scsi' model='virtio-scsi' index='0'/> <hostdev mode='subsystem' type='scsi'> <source> <adapter name='scsi_host0'/> <address bus='0' target='19' unit='1074872354'/> </source> </hostdev> ...trimmed... Since the reference unit and target fields are used in several places in the XML schema, create a separate one specific for SCSI Logical Units that will permit the greater length. This permits both the validation utility and the virsh edit command to succeed when a hostdev tag is included. Signed-off-by: Eric Farman <farman@xxxxxxxxxxxxxxxxxx> Reviewed-by: Matthew Rosato <mjrosato@xxxxxxxxxxxxxxxxxx> Reviewed-by: Stefan Zimmermann <stzi@xxxxxxxxxxxxxxxxxx> Reviewed-by: Boris Fiuczynski <fiuczy@xxxxxxxxxxxxxxxxxx> --- docs/formatdomain.html.in | 6 +++++- docs/schemas/domaincommon.rng | 14 ++++++++++++-- 2 files changed, 17 insertions(+), 3 deletions(-)diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in index 4e85b51..c88c4a6 100644 --- a/docs/formatdomain.html.in +++ b/docs/formatdomain.html.in @@ -3256,7 +3256,11 @@ </dd> <dt>scsi</dt> <dd>SCSI devices are described by both the <code>adapter</code> - and <code>address</code> elements. + and <code>address</code> elements. The <code>address</code> + element includes a <code>bus</code> attribute (a 2-digit bus + number), a <code>target</code> attribute (a 10-digit target + number), and a <code>unit</code> attribute (a 20-digit unit + number on the bus).Since we know from the v1 comments that qemu has a max of 16384 units, add: Not all hypervisors support larger <code>unit</code> values. It is up to each hypervisor to determine the maximum value supported for the adapter. I could add "<code>target</code> and " if you think that would be better..
The text with both target and unit sounds good to me.
<p> <span class="since">Since 1.2.8</span>, the <code>source</code> element of a SCSI device may contain the <code>protocol</code> diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index f0f7400..b3c5cb8 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -3833,10 +3833,10 @@ <ref name="driveBus"/> </attribute> <attribute name="target"> - <ref name="driveTarget"/> + <ref name="driveSCSITarget"/> </attribute> <attribute name="unit"> - <ref name="driveUnit"/> + <ref name="driveSCSIUnit"/> </attribute> </define> <define name="usbportaddress"> @@ -5129,11 +5129,21 @@ <param name="pattern">[0-9]{1,2}</param> </data> </define> + <define name="driveSCSITarget"> + <data type="string"> + <param name="pattern">[0-9]{1,10}</param> + </data> + </define> <define name="driveUnit"> <data type="string"> <param name="pattern">[0-9]{1,2}</param> </data> </define> + <define name="driveSCSIUnit"> + <data type="string"> + <param name="pattern">[0-9]{1,20}</param> + </data> + </define> <define name="featureName"> <data type="string"> <param name='pattern'>[a-zA-Z0-9\-_\.]+</param>I'm going to add a test as well. It's essentially a copy of tests/qemuxml2argvdata/qemuxml2argv-hostdev-scsi-virtio-scsi.xml adjusted to have a larger unit value (it'll be attached)
Ok. If you push it as a separate patch, feel free to add: Reviewed-by: Eric Farman <farman@xxxxxxxxxxxxxxxxxx> Thanks, Eric -- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list